diff options
| author | Vladimir Kot <vova28rus@gmail.com> | 2019-01-12 18:43:28 +0900 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2019-03-29 07:34:00 +0000 |
| commit | 58becdb30d1048903ad704a227a52bdf695a0087 (patch) | |
| tree | e1c7b3b16afbf340ea494efd8ab0199e1b4c797b /target/linux/ramips/base-files/etc | |
| parent | 7c4b85ee278576816b0f9d20e48fa696f8793fdf (diff) | |
| download | upstream-58becdb30d1048903ad704a227a52bdf695a0087.tar.gz upstream-58becdb30d1048903ad704a227a52bdf695a0087.tar.bz2 upstream-58becdb30d1048903ad704a227a52bdf695a0087.zip | |
ramips: add support for ZyXEL Keenetic Start
Device specification:
- SoC: RT5350F
- CPU Frequency: 360 MHz
- Flash Chip: Winbond 25Q32 (4096 KiB)
- RAM: 32768 KiB
- 5x 10/100 Mbps Ethernet (4x LAN, 1x WAN)
- 1x external, non-detachable antenna
- UART (J1) header on PCB (57800 8n1)
- Wireless: SoC-intergated: 2.4GHz 802.11bgn
- USB: None
- 3x LED, 2x button
Flash instruction:
1. Configure PC with static IP 192.168.1.2/24 and start TFTP server.
2. Rename "openwrt-ramips-rt305x-kn_st-squashfs-sysupgrade.bin"
to "kstart_recovery.bin" and place it in TFTP server directory.
3. Connect PC with one of LAN ports, press the reset button, power up
the router and keep button pressed until power LED start blinking.
4. Router will download file from TFTP server, write it to flash and reboot.
Signed-off-by: Vladimir Kot <vova28rus@gmail.com>
[fixed git commit author and whitespace issues in DTS]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux/ramips/base-files/etc')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/01_leds | 3 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 7 |
2 files changed, 10 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index b42e04f223..e05260f35a 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -468,6 +468,9 @@ zyxel,keenetic-extra-ii) set_wifi_led "$boardname:green:wifi" ucidef_set_led_switch "internet" "internet" "$boardname:green:internet" "switch0" "0x01" ;; +zyxel,keenetic-start) + set_wifi_led "rt2800pci-phy0::radio" + ;; youku-yk1) set_wifi_led "$boardname:blue:air" ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 9f656199a8..f9f1e208f6 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -451,6 +451,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "0:lan:2" "1:lan:1" "4:wan" "6@eth0" ;; + zyxel,keenetic-start) + ucidef_add_switch "switch0" \ + "0:lan:3" "1:lan:2" "2:lan:1" "3:lan:0" "4:wan" "6@eth0" + ;; *) RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350)"` if [ -n "${RT3X5X}" ]; then @@ -659,6 +663,9 @@ ramips_setup_macs() xiaomi,mir3p) lan_mac=$(mtd_get_mac_binary Factory 0xe006) ;; + zyxel,keenetic-start) + wan_mac=$(mtd_get_mac_binary factory 40) + ;; *) lan_mac=$(cat /sys/class/net/eth0/address) wan_mac=$(macaddr_add "$lan_mac" 1) |