diff options
| author | David Bauer <mail@david-bauer.net> | 2019-03-21 15:55:09 +0100 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2019-03-29 07:34:00 +0000 |
| commit | 3f019bf96cdf52668750f67cb139fa1b5c538f0b (patch) | |
| tree | bac3ef1accb91a010a6adff664df8ace4a888b38 /target/linux/ramips/base-files/etc | |
| parent | 58becdb30d1048903ad704a227a52bdf695a0087 (diff) | |
| download | upstream-3f019bf96cdf52668750f67cb139fa1b5c538f0b.tar.gz upstream-3f019bf96cdf52668750f67cb139fa1b5c538f0b.tar.bz2 upstream-3f019bf96cdf52668750f67cb139fa1b5c538f0b.zip | |
ramips: add Netgear EX6150
SoC: MediaTek MT7621
RAM: 64M (Winbond W9751G6KB-25)
FLASH: 16MB (Macronix MX25L12835F)
WiFi: MediaTek MT7662E bgn 2SS
WiFi: MediaTek MT7662E nac 2SS
BTN: ON/OFF - Reset - WPS - AP/Extender toggle
LED: - Arrow Right (blue)
- Arrow Left (blue)
- WiFi 1 (red/green)
- WiFi 2 (red/green)
- Power (green/amber)
- WPS (Green)
UART: UART is present as Pads on the backside of the PCB. They are
located on the other side of the Ethernet port.
3.3V - GND - TX - RX / 57600-8N1
3.3V is the nearest one to the antenna connectors
Installation
------------
Update the factory image via the Netgear web-interfaces (by default:
192.168.1.250/24).
You can also use the factory image with the nmrpflash tool.
For more information see https://github.com/jclehner/nmrpflash
Signed-off-by: David Bauer <mail@david-bauer.net>
[merge conflict in 02_network, flash@0 node rename, wlan DTS triggers]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux/ramips/base-files/etc')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index f9f1e208f6..2df9259021 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -366,6 +366,7 @@ ramips_setup_interfaces() "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5:wan" "6@eth0" ;; dlink,dir-510l|\ + netgear,ex6150|\ re350-v1) ucidef_add_switch "switch0" \ "0:lan" "6@eth0" |