aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/base-files/etc
diff options
context:
space:
mode:
authorHenryk Heisig <hyniu@o2.pl>2017-12-15 15:57:49 +0100
committerMathias Kresin <dev@kresin.me>2017-12-23 15:35:52 +0100
commit39e9bfb18199b046bd3b613002112e4e6dd53658 (patch)
treece67800be1fe11212ebe26592907817008b37aa0 /target/linux/ramips/base-files/etc
parent8ca650b8ce22fe2175cf15cfdd0e25206dd77481 (diff)
downloadupstream-39e9bfb18199b046bd3b613002112e4e6dd53658.tar.gz
upstream-39e9bfb18199b046bd3b613002112e4e6dd53658.tar.bz2
upstream-39e9bfb18199b046bd3b613002112e4e6dd53658.zip
ramips: add support for TP-Link TL-MR3420 v5
TP-Link TL-MR3420 v5 are simple N300 router with 5-port FE switch and non-detachable antennas. Its very similar to TP-Link TL-WR841N V13. Specification: - MT7628N/N (580 MHz) - 64 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz - 5x 10/100 Mbps Ethernet - 2x external, non-detachable antennas - USB 2.0 Port - UART (J1) header on PCB (115200 8n1) - 8x LED, 2x button, power input switch Flash instruction: The only way to flash LEDE image in mr3420v5 is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.0.225/24 and tftp server. 2. Rename "lede-ramips-mt7628-tplink_tl-mr3420-v5-squashfs-tftp-recovery.bin" to "tp_recovery.bin" and place it in tftp server directory. 3. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed for around 6-7 seconds, until device starts downloading the file. 4. Router will download file from server, write it to flash and reboot. Signed-off-by: Henryk Heisig <hyniu@o2.pl>
Diffstat (limited to 'target/linux/ramips/base-files/etc')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds6
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh1
3 files changed, 8 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index a5c51c7c88..a1c0c0e690 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -381,6 +381,12 @@ tl-wr841n-v13)
ucidef_set_led_switch "lan4" "lan4" "$boardname:green:lan4" "switch0" "0x10"
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
;;
+tplink,tl-mr3420-v5)
+ set_usb_led "$boardname:green:usb"
+ set_wifi_led "$boardname:green:wlan"
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
+ ;;
u25awf-h1)
set_wifi_led "u25awf:red:wifi"
ucidef_set_led_netdev "eth" "eth" "u25awf:green:lan" "eth0"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 5a64bb727a..b8116c773b 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -173,6 +173,7 @@ ramips_setup_interfaces()
mzk-wdpr|\
rb750gr3|\
rt-n14u|\
+ tplink,tl-mr3420-v5|\
tl-wr840n-v4|\
tl-wr840n-v5|\
tl-wr841n-v13|\
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index e7b49a5039..6ad22f56c8 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -37,6 +37,7 @@ get_status_led() {
nbg-419n2|\
pwh2004|\
r6220|\
+ tplink,tl-mr3420-v5|\
tl-wr840n-v4|\
tl-wr840n-v5|\
tl-wr841n-v13|\