diff options
| author | Hanqing Wong <hquu@outlook.com> | 2017-03-11 15:44:33 +0800 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2017-03-12 09:28:05 +0100 |
| commit | 38bee61dab029a7608088f64da71c19cfc8cf267 (patch) | |
| tree | b54962eab8dc64eb7976bc1c37348c0577b81791 /target/linux/ramips/base-files/etc/diag.sh | |
| parent | 562484f25c535ef01a004d11b23243a36bcc50c9 (diff) | |
| download | upstream-38bee61dab029a7608088f64da71c19cfc8cf267.tar.gz upstream-38bee61dab029a7608088f64da71c19cfc8cf267.tar.bz2 upstream-38bee61dab029a7608088f64da71c19cfc8cf267.zip | |
ramips: add support for Netgear R6220
This patch adds support for the Netgear R6220, aka Netgear AC1200 and
R6220-100NAS.
Specification:
- SoC: MediaTek MT7621ST (880 MHz)
- Falsh: 128 MiB (Macronix MX30LF1G08AA-TI)
- RAM: 128 MiB (Nanya NT5CB64M16FP-DH)
- Wireless: MediaTek MT7603EN b/g/n , MediaTek MT7612EN an+ac
- LAN speed: 10/100/1000
- LAN ports: 4
- WAN speed: 10/100/1000
- WAN ports: 1
- Serial baud rate of Bootloader and factory firmware: 57600
Installation through telnet:
- Copy kernel.bin and rootfs.bin to a USB flash disk, plug to usb port
on the router.
- Enable telnet with link: http://192.168.1.1/setup.cgi?todo=debug
(login if required, default: admin password)
- You will see "Debug Enabled!"
- Telnet 192.168.1.1 and login with "root"
- ls /mnt/shares/ to find out path of your USB disk. 'myUdisk' for
example.
- cd /mnt/shares/myUdisk
- mtd_write write rootfs.bin Rootfs
- mtd_write write kernel.bin Kernel
- reboot
nmrpflash can be used to recover to the netgear firmware if a broken
image was flashed.
Signed-off-by: Hanqing Wong <hquu@outlook.com>
Diffstat (limited to 'target/linux/ramips/base-files/etc/diag.sh')
| -rw-r--r-- | target/linux/ramips/base-files/etc/diag.sh | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 54961371f8..3bdd2cf1c1 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -33,6 +33,7 @@ get_status_led() { nbg-419n|\ nbg-419n2|\ pwh2004|\ + r6220|\ vr500|\ wnce2001|\ wndr3700v5|\ |