diff options
| author | Markus Scheck <markus@mscheck.de> | 2019-05-27 19:25:22 +0200 |
|---|---|---|
| committer | Christian Lamparter <chunkeey@gmail.com> | 2019-05-31 11:21:22 +0200 |
| commit | 5ff5c9bce6b6e51060c272521528b5afd789e9ab (patch) | |
| tree | 081c216ed91f205fdfe45c76c6c802cb3e199dcd /target/linux/ramips/base-files/etc/board.d | |
| parent | a41f474d17fef8aa94fdd6a8aa9b9a4bd2e5fa0f (diff) | |
| download | upstream-5ff5c9bce6b6e51060c272521528b5afd789e9ab.tar.gz upstream-5ff5c9bce6b6e51060c272521528b5afd789e9ab.tar.bz2 upstream-5ff5c9bce6b6e51060c272521528b5afd789e9ab.zip | |
ramips: add support for Xiaomi Mi Router 4A (100M Edition)
- SoC: MediaTek MT7628AN
- Flash: 16MB (Winbond W25Q128JV)
- RAM: 64MB
- Serial: As marked on PCB, 3V3 logic, baudrate is 115200
- Ethernet: 3x 10/100 Mbps (switched, 2x LAN + WAN)
- WIFI0: MT7628AN 2.4GHz 802.11b/g/n
- WIFI1: MT7612EN 5GHz 802.11ac
- Antennas: 4x external (2 per radio), non-detachable
- LEDs: Programmable power-LED (two-colored, yellow/blue)
Non-programmable internet-LED (shows WAN-activity)
- Buttons: Reset
INSTALLATION:
1. Connect to the serial port of the router and power it up.
If you get a prompt asking for boot-mode, go to step 3.
2. Unplug the router after
> Erasing SPI Flash...
> raspi_erase: offs:20000 len:10000
occurs on the serial port. Plug the router back in.
3. At the prompt select option 2 (Load system code then
write to Flash via TFTP.)
4. Enter 192.168.1.1 as the device IP and 192.168.1.2 as the
Server-IP.
5. Connect your computer to LAN1 and assign it as 192.168.1.2/24.
6. Rename the sysupgrade image to test.bin and serve it via TFTP.
7. Enter test.bin on the serial console and press enter.
Signed-off-by: Markus Scheck <markus@mscheck.de>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[added mt76 compatible]
Diffstat (limited to 'target/linux/ramips/base-files/etc/board.d')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 48ba1ba6a6..9c9f2bef9c 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -458,6 +458,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0" ;; + xiaomi,mir4a-100m) + ucidef_add_switch "switch0" \ + "4:lan:1" "2:lan:2" "0:wan" "6@eth0" + ;; zbtlink,zbt-we1226|\ y1) ucidef_add_switch "switch0" \ |