diff options
author | INAGAKI Hiroshi <musashino.open@gmail.com> | 2018-05-16 21:42:48 +0900 |
---|---|---|
committer | John Crispin <john@phrozen.org> | 2018-06-08 09:56:27 +0200 |
commit | a32c06f44d6340fd25d1eb276f62b8494de9f462 (patch) | |
tree | 97695ed41d05b2ec8f4c8643dbe255c4801960cd /target/linux/ramips/base-files/etc/board.d | |
parent | 0e9927d157f0e98303279d1049aa02ac43a49e0b (diff) | |
download | upstream-a32c06f44d6340fd25d1eb276f62b8494de9f462.tar.gz upstream-a32c06f44d6340fd25d1eb276f62b8494de9f462.tar.bz2 upstream-a32c06f44d6340fd25d1eb276f62b8494de9f462.zip |
ramips: add support for I-O DATA WN-GX300GR
I-O DATA WN-GX300GR is a 2.4 GHz band 11n router, based on MediaTek
MT7621S.
Specification:
- MT7621S (1-Core, 2-Threads)
- 64 MB of RAM
- 8 MB of Flash (SPI)
- 2T2R 2.4 GHz
- 5x 10/100/1000 Mbps Ethernet
- 2x LEDs, 4x keys (2x buttons, 1x slide switch)
- UART header on PCB
- Vcc, GND, TX, RX from ethernet port side
- baudrate: 115200 bps (U-Boot, OpenWrt)
Flash instruction using initramfs image:
1. Connect serial cable to UART header
2. Rename OpenWrt initramfs image for WN-GX300GR to "uImageWN-GX300GR"
and place it in the TFTP directory
3. Set the IP address of the computer to 192.168.99.8, connect to the
LAN port of WN-GX300GR, and start the TFTP server on the computer
4. Connect power cable to WN-GX300GR and turn on the router
5. Press "1" key on the serial console to interrupt boot process on
U-Boot, press Enter key 3 times and start firmware download via TFTP
6. WN-GX300GR downloads initramfs image and boot with it
7. On the initramfs image, execute "mtd erase firmware" to erase stock
firmware and execute sysupgrade with sysupgrade image for WN-GX300GR
8. Wait ~150 seconds to complete flasing
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/ramips/base-files/etc/board.d')
-rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/01_leds | 1 | ||||
-rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 4 |
2 files changed, 5 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index ae5ac77b5e..183ab2904f 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -168,6 +168,7 @@ dlink,dwr-921-c1) ucidef_set_led_default "sigstrength" "Signal Strength" "$boardname:green:sigstrength" "0" ;; dir-810l|\ +iodata,wn-gx300gr|\ mzk-750dhp|\ mzk-dp150n|\ vr500) diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 3a744bda0c..2e771ca75a 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -194,6 +194,7 @@ ramips_setup_interfaces() gl-mt300n|\ gl-mt750|\ hg255d|\ + iodata,wn-gx300gr|\ jhr-n805r|\ jhr-n825r|\ jhr-n926r|\ @@ -459,6 +460,9 @@ ramips_setup_macs() [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address) wan_mac=$(macaddr_add "$lan_mac" 1) ;; + iodata,wn-gx300gr) + wan_mac=$(macaddr_add "$(mtd_get_mac_binary Factory 4)" 1) + ;; kn_rc|\ kn_rf|\ kng_rc) |