diff options
author | L. D. Pinney <ldpinney@gmail.com> | 2017-07-22 09:15:56 +0800 |
---|---|---|
committer | Mathias Kresin <dev@kresin.me> | 2017-07-25 21:02:53 +0200 |
commit | 77645ffcd9ad767be02ea6d5cfe042928a3565d1 (patch) | |
tree | 3211ef40796a33dd3dc3dd865fdc15648d6f0e01 /target/linux/ramips/base-files/etc/board.d/02_network | |
parent | 4faf3149331e80db1e9a7425ad02e3c54492cea5 (diff) | |
download | upstream-77645ffcd9ad767be02ea6d5cfe042928a3565d1.tar.gz upstream-77645ffcd9ad767be02ea6d5cfe042928a3565d1.tar.bz2 upstream-77645ffcd9ad767be02ea6d5cfe042928a3565d1.zip |
ramips: add support for the GnuBee Personal Cloud One
The GnuBee Personal Cloud One crowdfunded on https://www.crowdsupply.com
It is a low-cost, low-power, network-attached storage device.
Specifications:
- SoC: MediaTek MT7621AT
- RAM: DDR3 512 MB
- Flash: 32 MB
- Six SATA ports for 2.5" Drives
- One micro SDcard
- One USB 3.0
- Two USB 2.0
- Gigabit Ethernet: 1 x WAN and 1 x LAN
- UART 3.5mm Audio Jack or 3 pin header - 57600 8N1
- Four GPIOs available on a pin header
Flash instructions:
The GnuBee Personal Cloud One ships with libreCMC installed.
libreCMC is a Free Software Foundation approved fork of LEDE/OpenWrt.
As such one can upgrade using the webinterface or sysupgrade.
Das U-Boot has multiple options for recovery or updates including :
- USB
- http
- tftp
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
[use switchdev led trigger, all interfaces are in vlan1; rename leds
according to board.d setting; remove ge2 group from the pinmux, this
group doesn't exist in the driver]
Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target/linux/ramips/base-files/etc/board.d/02_network')
-rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 2d8a90cd3e..ee769b5a0f 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -186,6 +186,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" ;; + gb-pc1) + ucidef_add_switch "switch0" \ + "0:lan" "4:lan" "6@eth0" + ;; gl-mt300n-v2) ucidef_add_switch "switch0" \ "1:lan" "0:wan" "6@eth0" |