diff options
| author | Vianney le Clément de Saint-Marcq <code@quartic.eu> | 2018-04-04 01:19:22 +0200 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2018-04-08 09:53:50 +0200 |
| commit | bcf21251425de261a64a27fe21529d2ddbcc13d5 (patch) | |
| tree | ae6ca6f0f573d71ab145406e2f39044c82b6ba04 /target/linux/ramips/base-files/etc/board.d/02_network | |
| parent | 80a94aacaf8ce67d7a6f0f4342292c4a427ec838 (diff) | |
| download | upstream-bcf21251425de261a64a27fe21529d2ddbcc13d5.tar.gz upstream-bcf21251425de261a64a27fe21529d2ddbcc13d5.tar.bz2 upstream-bcf21251425de261a64a27fe21529d2ddbcc13d5.zip | |
ramips: add support for Zorlik ZL5900V2
The Zorlik ZL5900V2 is an unbranded clone of HAME MPR-A1/2. It is
marketed as "3G Wi-Fi Router". Only the PCB has the model name
"ZL5900V2" printed on it.
Specifications:
- Ralink RT5350F (360 MHz)
- 32 MB RAM
- 8 MB Flash
- 802.11bgn 1T1R
- 1x 10/100 Mbps Ethernet
- 1x USB 2.0 (Type-A)
- 5200 mAh battery
The ramdisk image (not the squashfs sysupgrade image) can be flashed
through the web interface (named "GoAhead") of the factory firmware.
However, as the factory firmware does not cleanly unmount the rootfs
before flashing, the device may hang instead of rebooting after
successful write. Power cycling the device gets you in OpenWrt where
the squashfs image may be flashed through normal sysupgrade procedure.
Signed-off-by: Vianney le Clément de Saint-Marcq <code@quartic.eu>
Diffstat (limited to 'target/linux/ramips/base-files/etc/board.d/02_network')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 0f173bc95c..b7e5fb6ff9 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -61,6 +61,7 @@ ramips_setup_interfaces() widora,neo-32m|\ wnce2001|\ zbt-cpe102|\ + zorlik,zl5900v2|\ zte-q7) ucidef_add_switch "switch0" ucidef_add_switch_attr "switch0" "enable" "false" |