diff options
| author | Alexey Belyaev <spider@spider.vc> | 2017-04-28 00:02:05 +0600 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2017-05-10 08:45:12 +0200 |
| commit | a7cbf59e0e04a24b91a112e9b2e1a72ed5b4c1f6 (patch) | |
| tree | 3db09931e0d2fc603c7b55d0a9963262c84163e4 /target/linux/ramips/base-files/etc/board.d/01_leds | |
| parent | 54ea0f45c8b375ff29478c1f0d659d1548e89fc9 (diff) | |
| download | upstream-a7cbf59e0e04a24b91a112e9b2e1a72ed5b4c1f6.tar.gz upstream-a7cbf59e0e04a24b91a112e9b2e1a72ed5b4c1f6.tar.bz2 upstream-a7cbf59e0e04a24b91a112e9b2e1a72ed5b4c1f6.zip | |
ramips: add new device ZyXEL Keenetic as kn
This device exactly same as NBG-419N but with USB port and USB Led.
Specification:
- SoC: Ralink RT3052 (MIPS24Kc) @384MHz
- RAM: 32 MiB
- Flash: 8 MiB
- WLAN: WiSoC 2T2R/300Mbps (2.4GHz)
- LAN: 4x100M
- WAN: 1x100M
- USB: 1x2.0
Installation via serial console (57600 8N1) from TFTP server
- rename the firmware to something shorter, for example
"sysupgrade.bin" (max. 32 chars)
- copy firmware TFTP server's directory
- when you power on device, and see U-Boot log, immediatly push "2"
once.
- You will see this message:
2: System Load Linux Kernel then write to Flash via TFTP.
Warning!! Erase Linux in Flash then burn new one. Are you sure?
- Push "y", and enter: device IP, then TFTP server's IP, and then
image firmware file name.
The firmware will be downloaded within ~30 seconds and flashed to the
device (It will take about 2 minutes).
Signed-off-by: Alexey Belyaev <spider@spider.vc>
[squash commits, compact commit message, fix compatible string, remove
superfluous pinmuxes]
Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target/linux/ramips/base-files/etc/board.d/01_leds')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/01_leds | 9 |
1 files changed, 5 insertions, 4 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 52542ec265..9322228a10 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -222,6 +222,11 @@ ht-tm02) ucidef_set_led_netdev "eth" "Ethernet" "$board:green:lan" "eth0" set_wifi_led "$board:blue:wlan" ;; +kn|\ +nbg-419n2) + set_usb_led "$board:green:usb" + set_wifi_led "rt2800pci-phy0::radio" + ;; kn_rc|\ kn_rf|\ kng_rc) @@ -265,10 +270,6 @@ mzk-ex750np) na930) set_usb_led "$board:blue:status" ;; -nbg-419n2) - set_usb_led "$board:green:usb" - set_wifi_led "rt2800pci-phy0::radio" - ;; newifi-d1) set_usb_led "$board:red:status" ;; |