diff options
| author | Roger Pueyo Centelles <roger.pueyo@guifi.net> | 2016-11-06 13:00:38 +0100 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2016-11-08 11:17:10 +0100 |
| commit | 5f6e94855113b0c37fba57eda4af0b0427457b98 (patch) | |
| tree | 80cd6965c337769bd84fb7e7d175fde6cff0d397 /target/linux/ramips/base-files/etc/board.d/01_leds | |
| parent | a50243ea1f1fe28239a57283ef3a5ec6e8577dfb (diff) | |
| download | upstream-5f6e94855113b0c37fba57eda4af0b0427457b98.tar.gz upstream-5f6e94855113b0c37fba57eda4af0b0427457b98.tar.bz2 upstream-5f6e94855113b0c37fba57eda4af0b0427457b98.zip | |
ramips: Add support for Wavlink WL-WN575A3
This commit adds support for the Wavlink WL-WN575A3, a dual-band wall-plug
wireless router with the following specifications:
- CPU: MediaTek MT7628AN 580MHz
- Flash: 8MB
- RAM: 64MB
- Ethernet: 2x 10/100 Mbps (switched)
- 2.4 GHz: 802.11b/g/n SoC, MIMO 2x2, 20 dBm
- 5 GHz: 802.11a/n/ac MT7612E, MIMO 2x2, 20 dBm
- Antennas: 4x external (2 per radio), non-detachable
- LEDs: 4 programmable + LAN, WAN, POWER
- Buttons: reset, WPS
Flashing instructions:
Factory U-boot launches a TFTP client if WPS button is pressed during power-on.
Rename the sysupgrade file and configure a TFTP as follows:
- Client (WL-WN575A3) IP: 192.168.10.101
- Server IP: 192.168.10.100
- Filename: firmware.bin
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Diffstat (limited to 'target/linux/ramips/base-files/etc/board.d/01_leds')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/01_leds | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 27e15caf4d..8d6bb459c4 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -312,6 +312,12 @@ whr-600d) ucidef_set_led_default "power" "power" "$board:green:power" "1" ucidef_set_led_default "router" "router" "$board:green:router" "1" ;; +wl-wn575a3) + ucidef_set_rssimon "wlan1" "40000" "1" + ucidef_set_led_rssi "wifi-low" "wifi-low" "$board:green:wifi-low" "wlan1" "1" "49" "0" "1" + ucidef_set_led_rssi "wifi-med" "wifi-med" "$board:green:wifi-med" "wlan1" "50" "84" "0" "1" + ucidef_set_led_rssi "wifi-high" "wifi-high" "$board:green:wifi-high" "wlan1" "85" "100" "0" "1" + ;; wrh-300cr) set_wifi_led "$board:green:wlan" ucidef_set_led_netdev "lan" "lan" "$board:green:ethernet" "eth0" |