diff options
| author | Jan-Niklas Burfeind <git@aiyionpri.me> | 2022-12-07 19:12:14 +0100 |
|---|---|---|
| committer | David Bauer <mail@david-bauer.net> | 2022-12-09 00:19:44 +0100 |
| commit | 6cd1035d8dc001561331ca9e613d7dfc7d0fd7a6 (patch) | |
| tree | 27f990742441ef8ae96fdf494582b799e4439a04 /target/linux/qoriq/generic | |
| parent | 3f7ce4bd4040aab2ff9fa38a5b00c26851341b75 (diff) | |
| download | upstream-6cd1035d8dc001561331ca9e613d7dfc7d0fd7a6.tar.gz upstream-6cd1035d8dc001561331ca9e613d7dfc7d0fd7a6.tar.bz2 upstream-6cd1035d8dc001561331ca9e613d7dfc7d0fd7a6.zip | |
ramips: add support for Wavlink WS-WN572HP3 4G
Wavlink WS-WN572HP3 4G is an 802.11ac
dual-band outdoor router with LTE support.
Specifications;
* Soc: MT7621DAT
* RAM: 128MiB
* Flash: NOR 16MiB GD-25Q128ESIG3
* Wi-Fi:
* MT7613BEN: 5GHz
* MT7603EN: 2.4GHz
* Ethernet: 2x 1GbE
* USB: None - only used internally
* LTE Modem: Quectel EC200T-EU
* UART: 115200 baud
* LEDs:
* 7 blue at the front
* 1 Power
* 2 LAN / WAN
* 1 Status
* 3 RSSI (annotated 4G)
* 1 green at the bottom (4G LED)
* Buttons: 1 reset button
Installation:
* press and hold the reset button while powering on the device
* keep it pressed for ten seconds
* connect to 192.168.10.1 via webbrowser (chromium/chrome works, at
least Firefox 106.0.3 does not)
* upload the sysupgrade image, confirm the checksum, wait 2 minutes
until the device reboots
Revert to stock firmware:
* same as installation but use the recovery image for WL-WN572HP3
Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
(cherry picked from commit dce66899bf243d78689afcc693340b891bbf4c2d)
Diffstat (limited to 'target/linux/qoriq/generic')
0 files changed, 0 insertions, 0 deletions