aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/pxa
diff options
context:
space:
mode:
authorHauke Mehrtens <hauke@hauke-m.de>2014-07-18 20:45:49 +0000
committerHauke Mehrtens <hauke@hauke-m.de>2014-07-18 20:45:49 +0000
commit6f6b8feae6d38ecf958095f909d78ca3863f34e6 (patch)
treeb012a1289ac6e30534bd1443b8984dea0a823896 /target/linux/pxa
parent5a331a91aab9fe37b4f1947d70abb8d5877ea1df (diff)
downloadupstream-6f6b8feae6d38ecf958095f909d78ca3863f34e6.tar.gz
upstream-6f6b8feae6d38ecf958095f909d78ca3863f34e6.tar.bz2
upstream-6f6b8feae6d38ecf958095f909d78ca3863f34e6.zip
pxa: add support for kernel 3.10
This is compile tested only, please run test and report back. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 41737
Diffstat (limited to 'target/linux/pxa')
-rw-r--r--target/linux/pxa/config-3.10232
-rw-r--r--target/linux/pxa/patches-3.10/001-gumstix_verdex_pro_arch_support.patch882
-rw-r--r--target/linux/pxa/patches-3.10/002-verdex_lcd_support.patch52
-rw-r--r--target/linux/pxa/patches-3.10/003-gumstix_h_verdex_pro_support.patch214
-rw-r--r--target/linux/pxa/patches-3.10/004-smsc911x_verdex_pro_support.patch108
-rw-r--r--target/linux/pxa/patches-3.10/005-verdex_pcmcia_support.patch209
-rw-r--r--target/linux/pxa/patches-3.10/a01-arm-debugll-printk.patch24
7 files changed, 1721 insertions, 0 deletions
diff --git a/target/linux/pxa/config-3.10 b/target/linux/pxa/config-3.10
new file mode 100644
index 0000000000..72f261a5c5
--- /dev/null
+++ b/target/linux/pxa/config-3.10
@@ -0,0 +1,232 @@
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_GUMSTIX=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+# CONFIG_ARCH_LUBBOCK is not set
+CONFIG_ARCH_MTD_XIP=y
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_ARCH_PXA_PALM is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ARCH_VIPER is not set
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARM=y
+# CONFIG_ARM_APPENDED_DTB is not set
+# CONFIG_ARM_CPU_SUSPEND is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_NR_BANKS=8
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+# CONFIG_ARM_THUMB is not set
+# CONFIG_ARPD is not set
+CONFIG_ATAGS=y
+CONFIG_AUTO_ZRELADDR=y
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_CACHE_XSC3L2=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
+CONFIG_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_PXA300=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_USE_DOMAINS=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_XSCALE=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+# CONFIG_DEBUG_USER is not set
+CONFIG_DTC=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_EPOLL is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_PXA=y
+# CONFIG_HAMRADIO is not set
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_BPF_JIT=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_PWM=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_UID16=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_IO_36=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_WORK=y
+CONFIG_IWMMXT=y
+CONFIG_KTIME_SCALAR=y
+# CONFIG_MACH_ARCOM_ZEUS is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_BALLOON3 is not set
+# CONFIG_MACH_CAPC7117 is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+# CONFIG_MACH_CSB726 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_GUMSTIX_F is not set
+CONFIG_MACH_GUMSTIX_VERDEX=y
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_ICONTROL is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_MACH_PCM027 is not set
+CONFIG_MACH_PXA3XX_DT=y
+# CONFIG_MACH_RAUMFELD_CONNECTOR is not set
+# CONFIG_MACH_RAUMFELD_RC is not set
+# CONFIG_MACH_RAUMFELD_SPEAKER is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_STARGATE2 is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_VPAC270 is not set
+# CONFIG_MACH_XCEP is not set
+# CONFIG_MACH_ZIPIT2 is not set
+# CONFIG_MACH_ZYLONITE300 is not set
+# CONFIG_MACH_ZYLONITE320 is not set
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_PXA=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_OF is not set
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_XIP is not set
+CONFIG_MULTI_IRQ_HANDLER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_KUSER_HELPERS=y
+CONFIG_NEED_MACH_GPIO_H=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_DEVICE=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_OUTER_CACHE=y
+# CONFIG_PACKET is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PCI_SYSCALL is not set
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+CONFIG_PLAT_PXA=y
+CONFIG_POWER_SUPPLY=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_PXA27x=y
+CONFIG_PXA3xx=y
+# CONFIG_PXA_EZX is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_RCU_STALL_COMMON is not set
+# CONFIG_SA1100_WATCHDOG is not set
+CONFIG_SCHED_HRTICK=y
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SMSC911X=y
+# CONFIG_SMSC911X_ARCH_HOOKS is not set
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+# CONFIG_TRIZEPS_PXA is not set
+CONFIG_UID16=y
+CONFIG_UIDGID_CONVERTED=y
+CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h"
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_ARCH_HAS_XHCI is not set
+CONFIG_USE_OF=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_VLAN_8021Q is not set
+CONFIG_XSCALE_PMU=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/pxa/patches-3.10/001-gumstix_verdex_pro_arch_support.patch b/target/linux/pxa/patches-3.10/001-gumstix_verdex_pro_arch_support.patch
new file mode 100644
index 0000000000..531d60d89b
--- /dev/null
+++ b/target/linux/pxa/patches-3.10/001-gumstix_verdex_pro_arch_support.patch
@@ -0,0 +1,882 @@
+From 4f4bb58cba3a6c44e9f9f113609287d9d50be9c4 Mon Sep 17 00:00:00 2001
+From: Joseph Kortje <jpktech@rogers.com>
+Date: Wed, 28 Oct 2009 21:11:28 -0400
+Subject: [PATCH] [ARM] Gumstix Verdex Pro arch support
+
+add an option for Verdex Pro when ARCH_GUMSTIX is selected, and
+factor earlier Gumstix support into a seperate option
+
+Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
+---
+ arch/arm/mach-pxa/Kconfig | 29 +-
+ arch/arm/mach-pxa/Makefile | 3 +-
+ arch/arm/mach-pxa/gumstix-verdex.c | 749 +++++++++++++++++++++++++++
+ arch/arm/mach-pxa/include/mach/mfp-pxa27x.h | 1 +
+ 4 files changed, 772 insertions(+), 10 deletions(-)
+ create mode 100644 arch/arm/mach-pxa/gumstix-verdex.c
+
+--- a/arch/arm/mach-pxa/Kconfig
++++ b/arch/arm/mach-pxa/Kconfig
+@@ -129,23 +129,34 @@ config MACH_CAPC7117
+ select PXA3xx
+
+ config ARCH_GUMSTIX
+- bool "Gumstix XScale 255 boards"
+- select PXA25x
++ bool "Gumstix boards"
+ help
+- Say Y here if you intend to run this kernel on
+- Basix, Connex, ws-200ax, ws-400ax systems
++ Say Y here if you intend to run this kernel on a
++ gumstix computer.
+
+-choice
+- prompt "Gumstix Carrier/Expansion Board"
+ depends on ARCH_GUMSTIX
+
+-config GUMSTIX_AM200EPD
++config MACH_GUMSTIX_F
++ bool "Gumstix Basix/Connex ..."
++ depends on ARCH_GUMSTIX
++ select PXA25x
++
++ choice
++ prompt "Gumstix Carrier/Expansion Board"
++ depends on MACH_GUMSTIX_F
++
++ config GUMSTIX_AM200EPD
+ bool "Enable AM200EPD board support"
+
+-config GUMSTIX_AM300EPD
++ config GUMSTIX_AM300EPD
+ bool "Enable AM300EPD board support"
+
+-endchoice
++ endchoice
++
++config MACH_GUMSTIX_VERDEX
++ bool "Gumstix VERDEX ..."
++ depends on ARCH_GUMSTIX
++ select PXA27x
+
+ config MACH_INTELMOTE2
+ bool "Intel Mote 2 Platform"
+--- a/arch/arm/mach-pxa/Makefile
++++ b/arch/arm/mach-pxa/Makefile
+@@ -45,7 +45,8 @@ endif
+ obj-$(CONFIG_MACH_EM_X270) += em-x270.o
+ obj-$(CONFIG_MACH_CM_X300) += cm-x300.o
+ obj-$(CONFIG_MACH_CAPC7117) += capc7117.o mxm8x10.o
+-obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
++obj-$(CONFIG_MACH_GUMSTIX_F) += gumstix.o
++obj-$(CONFIG_MACH_GUMSTIX_VERDEX) += gumstix-verdex.o
+ obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o
+ obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o
+ obj-$(CONFIG_MACH_INTELMOTE2) += stargate2.o
+--- /dev/null
++++ b/arch/arm/mach-pxa/gumstix-verdex.c
+@@ -0,0 +1,794 @@
++/*
++ * linux/arch/arm/mach-pxa/gumstix-verdex.c
++ *
++ * Support for the Gumstix verdex motherboard.
++ *
++ * Original Author: Craig Hughes
++ * Created: Feb 14, 2008
++ * Copyright: Craig Hughes
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * Implemented based on lubbock.c by Nicolas Pitre and code from Craig
++ * Hughes
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/interrupt.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/i2c/tsc2007.h>
++#include <linux/i2c/pxa-i2c.h>
++#include <linux/gpio.h>
++#include <linux/gpio-pxa.h>
++
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <asm/mach-types.h>
++#include <asm/irq.h>
++#include <asm/sizes.h>
++#include <asm/io.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/irq.h>
++#include <asm/mach/flash.h>
++
++#include <linux/platform_data/mmc-pxamci.h>
++#include <mach/udc.h>
++#include <linux/platform_data/video-pxafb.h>
++#include <linux/platform_data/usb-ohci-pxa27x.h>
++#include <mach/pxa27x.h>
++#include <mach/pxa27x-udc.h>
++#include <mach/gpio.h>
++
++#include <mach/gumstix.h>
++
++#include "generic.h"
++
++#include <linux/delay.h>
++
++static struct resource flash_resource = {
++ .start = 0x00000000,
++ .end = SZ_64M - 1,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct mtd_partition gumstix_partitions[] = {
++ {
++ .name = "u-boot",
++ .size = 0x00040000,
++ .offset = 0,
++ .mask_flags = MTD_WRITEABLE /* force read-only */
++ } , {
++ .name = "rootfs",
++ .size = 0x01ec0000,
++ .offset = 0x00040000
++ } , {
++ .name = "kernel",
++ .size = 0x00100000,
++ .offset = 0x01f00000
++ }
++};
++
++static struct flash_platform_data gumstix_flash_data = {
++ .map_name = "cfi_probe",
++ .parts = gumstix_partitions,
++ .nr_parts = ARRAY_SIZE(gumstix_partitions),
++ .width = 2,
++};
++
++static struct platform_device gumstix_flash_device = {
++ .name = "pxa2xx-flash",
++ .id = 0,
++ .dev = {
++ .platform_data = &gumstix_flash_data,
++ },
++ .resource = &flash_resource,
++ .num_resources = 1,
++};
++
++#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) \
++ || defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
++
++#include <linux/smsc911x.h>
++
++static struct resource verdex_smsc911x_resources[] = {
++ [0] = {
++ .name = "smsc911x-memory",
++ .start = PXA_CS1_PHYS,
++ .end = PXA_CS1_PHYS + 0x000fffff,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH0),
++ .end = PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH0),
++ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
++ },
++};
++
++static struct smsc911x_platform_config verdex_smsc911x_config = {
++ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
++ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
++ .flags = SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS,
++ .phy_interface = PHY_INTERFACE_MODE_MII,
++};
++
++static struct platform_device verdex_smsc911x_device = {
++ .name = "smsc911x",
++ .id = -1,
++ .num_resources = ARRAY_SIZE(verdex_smsc911x_resources),
++ .resource = verdex_smsc911x_resources,
++ .dev = {
++ .platform_data = &verdex_smsc911x_config,
++ },
++};
++#endif
++
++#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
++static void __init verdex_init_smsc911x(void)
++{
++
++ printk(KERN_INFO "Initializing Gumstix verdex smsc911x\n");
++
++ if (gpio_request(GPIO_GUMSTIX_ETH0_RST, "SMSC911x_ETH0_RST") != 0) {
++ printk(KERN_ERR "could not obtain gpio for SMSC911x_ETH0_RST\n");
++ goto err_request_gpio_eth0_rst;
++ }
++
++ if (gpio_request(GPIO_GUMSTIX_ETH0, "SMSC911x_ETH0_IRQ") != 0) {
++ printk(KERN_ERR "could not obtain gpio for SMSC911x_ETH0_IRQ\n");
++ goto err_request_gpio_eth0_irq;
++ }
++
++ if (gpio_direction_output(GPIO_GUMSTIX_ETH0_RST, 0) != 0) {
++ printk(KERN_ERR "could not set SMSC911x_ETH0_RST pin to output\n");
++ goto err_dir;
++ }
++
++ gpio_set_value(GPIO_GUMSTIX_ETH0_RST, 0);
++
++ msleep(500); // Hold RESET for at least 200ms
++
++ gpio_set_value(GPIO_GUMSTIX_ETH0_RST, 1);
++
++ msleep(50);
++
++ if (gpio_direction_input(GPIO_GUMSTIX_ETH0) != 0) {
++ printk(KERN_ERR "could not set SMSC911x_ETH0_IRQ pin to input\n");
++ goto err_dir;
++ }
++
++ gpio_export(GPIO_GUMSTIX_ETH0, 0);
++ platform_device_register(&verdex_smsc911x_device);
++ return;
++
++err_dir:
++ gpio_free(GPIO_GUMSTIX_ETH0_RST);
++
++err_request_gpio_eth0_irq:
++ gpio_free(GPIO_GUMSTIX_ETH0);
++
++err_request_gpio_eth0_rst:
++ return;
++}
++
++#else
++static void __init verdex_init_smsc911x(void) { return; }
++#endif
++
++static unsigned long verdex_pin_config[] = {
++ /* MMC */
++ GPIO32_MMC_CLK,
++ GPIO112_MMC_CMD,
++ GPIO92_MMC_DAT_0,
++ GPIO109_MMC_DAT_1,
++ GPIO110_MMC_DAT_2,
++ GPIO111_MMC_DAT_3,
++
++ /* BTUART */
++ GPIO42_BTUART_RXD,
++ GPIO43_BTUART_TXD,
++ GPIO44_BTUART_CTS,
++ GPIO45_BTUART_RTS,
++
++ /* STUART */
++ GPIO46_STUART_RXD,
++ GPIO47_STUART_TXD,
++
++ /* FFUART */
++ GPIO34_FFUART_RXD,
++ GPIO39_FFUART_TXD,
++
++ /* SSP 2 */
++ GPIO19_SSP2_SCLK,
++ GPIO14_SSP2_SFRM,
++ GPIO13_SSP2_TXD,
++ GPIO11_SSP2_RXD,
++
++ /* SDRAM and local bus */
++ GPIO49_nPWE,
++ GPIO15_nCS_1,
++
++ /* I2C */
++ GPIO117_I2C_SCL,
++ GPIO118_I2C_SDA,
++
++ /* PWM 0 */
++ GPIO16_PWM0_OUT,
++
++ /* BRIGHTNESS */
++ GPIO17_PWM1_OUT,
++
++ /* LCD */
++ GPIO58_LCD_LDD_0,
++ GPIO59_LCD_LDD_1,
++ GPIO60_LCD_LDD_2,
++ GPIO61_LCD_LDD_3,
++ GPIO62_LCD_LDD_4,
++ GPIO63_LCD_LDD_5,
++ GPIO64_LCD_LDD_6,
++ GPIO65_LCD_LDD_7,
++ GPIO66_LCD_LDD_8,
++ GPIO67_LCD_LDD_9,
++ GPIO68_LCD_LDD_10,
++ GPIO69_LCD_LDD_11,
++ GPIO70_LCD_LDD_12,
++ GPIO71_LCD_LDD_13,
++ GPIO72_LCD_LDD_14,
++ GPIO73_LCD_LDD_15,
++ GPIO74_LCD_FCLK,
++ GPIO75_LCD_LCLK,
++ GPIO76_LCD_PCLK,
++#ifdef CONFIG_FB_PXA_SHARP_LQ043_PSP
++ /* DISP must be always high while screen is on */
++ /* Done below in verdex_init */
++#else
++ GPIO77_LCD_BIAS,
++#endif
++};
++
++#if defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
++
++static unsigned long gpio_ntschg_0[] = {
++ GPIO104_GPIO, // pxa_gpio_mode(GPIO_GUMSTIX_nCD_0_MD);
++};
++
++static unsigned long gpio_ntschg_1[] = {
++ GPIO18_GPIO, // pxa_gpio_mode(GPIO_GUMSTIX_nSTSCHG_1_MD);
++ GPIO36_GPIO, // pxa_gpio_mode(GPIO_GUMSTIX_nCD_1_MD);
++ GPIO27_GPIO, // pxa_gpio_mode(GPIO_GUMSTIX_PRDY_nBSY_1_MD);
++};
++
++static unsigned long gpio_prdy_nbsy_old[] = {
++ GPIO111_GPIO, // pxa_gpio_mode(GPIO_GUMSTIX_nSTSCHG_0_MD);
++ GPIO109_GPIO, // pxa_gpio_mode(GPIO_GUMSTIX_PRDY_nBSY_0_OLD_MD);
++};
++
++static unsigned long gpio_prdy_nbsy[] = {
++ GPIO96_GPIO, // pxa_gpio_mode(GPIO_GUMSTIX_PRDY_nBSY_0_MD);
++};
++
++static unsigned long gpio_nhw_init[] = {
++ GPIO48_nPOE, // pxa_gpio_mode(GPIO_GUMSTIX_nPOE_MD);
++ GPIO102_nPCE_1, // pxa_gpio_mode(GPIO_GUMSTIX_nPCE_1_MD);
++ GPIO105_nPCE_2, // pxa_gpio_mode(GPIO_GUMSTIX_nPCE_2_MD);
++ GPIO104_GPIO, // pxa_gpio_mode(GPIO_GUMSTIX_nCD_0_MD);
++
++ GPIO49_nPWE, // pxa_gpio_mode(GPIO_GUMSTIX_nPWE_MD);
++ GPIO50_nPIOR, // pxa_gpio_mode(GPIO_GUMSTIX_nPIOR_MD);
++ GPIO51_nPIOW, // pxa_gpio_mode(GPIO_GUMSTIX_nPIOW_MD);
++ GPIO79_PSKTSEL, // pxa_gpio_mode(GPIO_GUMSTIX_pSKTSEL_MD);
++ GPIO55_nPREG, // pxa_gpio_mode(GPIO_GUMSTIX_nPREG_MD);
++ GPIO56_nPWAIT, // pxa_gpio_mode(GPIO_GUMSTIX_nPWAIT_MD);
++ GPIO57_nIOIS16, // pxa_gpio_mode(GPIO_GUMSTIX_nIOIS16_MD);
++};
++
++static int net_cf_vx_mode = 0;
++static int pcmcia_cf_nr = 2;
++
++inline void __init gumstix_pcmcia_cpld_clk(void)
++{
++ gpio_set_value(GPIO_GUMSTIX_nPOE, 0);
++ gpio_set_value(GPIO_GUMSTIX_nPOE, 1);
++}
++
++inline unsigned char __init gumstix_pcmcia_cpld_read_bits(int bits)
++{
++ unsigned char result = 0;
++ unsigned int shift = 0;
++ while(bits--)
++ {
++ result |= !!(gpio_get_value(GPIO_GUMSTIX_nCD_0) & GPIO_bit(GPIO_GUMSTIX_nCD_0)) << shift;
++ shift ++;
++ gumstix_pcmcia_cpld_clk();
++ }
++ printk("CPLD responded with: %02x\n",result);
++ return result;
++}
++
++/* We use the CPLD on the CF-CF card to read a value from a shift register. If we can read that
++ * magic sequence, then we have 2 CF cards; otherwise we assume just one
++ * The CPLD will send the value of the shift register on GPIO11 (the CD line for slot 0)
++ * when RESET is held in reset. We use GPIO48 (nPOE) as a clock signal,
++ * GPIO52/53 (card enable for both cards) to control read/write to the shift register
++ */
++static void __init gumstix_count_cards(void)
++{
++ if ((gpio_request(GPIO_GUMSTIX_nPOE, "GPIO_GUMSTIX_nPOE") == 0) &&
++ (gpio_direction_output(GPIO_GUMSTIX_nPOE, 1) == 0))
++ gpio_export(GPIO_GUMSTIX_nPOE, 0);
++ else
++ printk(KERN_ERR "could not obtain gpio for GPIO_GUMSTIX_nPOE\n");
++
++ if ((gpio_request(GPIO_GUMSTIX_nPCE_1, "GPIO_GUMSTIX_nPCE_1") == 0) &&
++ (gpio_direction_output(GPIO_GUMSTIX_nPCE_1, 1) == 0))
++ gpio_export(GPIO_GUMSTIX_nPCE_1, 0);
++ else
++ printk(KERN_ERR "could not obtain gpio for GPIO_GUMSTIX_nPCE_1\n");
++
++ if ((gpio_request(GPIO_GUMSTIX_nPCE_2, "GPIO_GUMSTIX_nPCE_2") == 0) &&
++ (gpio_direction_output(GPIO_GUMSTIX_nPCE_2, 1) == 0))
++ gpio_export(GPIO_GUMSTIX_nPCE_2, 0);
++ else
++ printk(KERN_ERR "could not obtain gpio for GPIO_GUMSTIX_nPCE_2\n");
++
++ if ((gpio_request(GPIO_GUMSTIX_nCD_0, "GPIO_GUMSTIX_nCD_0") == 0) &&
++ (gpio_direction_input(GPIO_GUMSTIX_nCD_0) == 0))
++ gpio_export(GPIO_GUMSTIX_nCD_0, 0);
++ else
++ printk(KERN_ERR "could not obtain gpio for GPIO_GUMSTIX_nCD_0\n");
++
++ if (net_cf_vx_mode) {
++ if ((gpio_request(GPIO_GUMSTIX_CF_OLD_RESET, "GPIO_GUMSTIX_CF_OLD_RESET") == 0) &&
++ (gpio_direction_output(GPIO_GUMSTIX_CF_OLD_RESET, 1) == 0)) {
++ gpio_export(GPIO_GUMSTIX_CF_OLD_RESET, 0);
++ } else {
++ printk(KERN_ERR "could not obtain gpio for GPIO_GUMSTIX_CF_OLD_RESET\n");
++ }
++ } else {
++ if ((gpio_request(GPIO_GUMSTIX_CF_RESET, "GPIO_GUMSTIX_CF_RESET") == 0) &&
++ (gpio_direction_output(GPIO_GUMSTIX_CF_RESET, 1) == 0)) {
++ gpio_export(GPIO_GUMSTIX_CF_RESET, 0);
++ } else {
++ printk(KERN_ERR "could not obtain gpio for GPIO_GUMSTIX_CF_RESET\n");
++ }
++ }
++
++ // Setup the shift register
++ gpio_set_value(GPIO_GUMSTIX_nPCE_1, 1);
++ gpio_set_value(GPIO_GUMSTIX_nPCE_2, 0);
++
++ // Tick the clock to program the shift register
++ gumstix_pcmcia_cpld_clk();
++
++ // Now set shift register into read mode
++ gpio_set_value(GPIO_GUMSTIX_nPCE_1, 0);
++ gpio_set_value(GPIO_GUMSTIX_nPCE_2, 1);
++
++ // We can read the bits now -- 0xC2 means "Dual compact flash"
++ if(gumstix_pcmcia_cpld_read_bits(8) != 0xC2)
++ {
++ // We do not have 2 CF slots
++ pcmcia_cf_nr = 1;
++ }
++
++ udelay(50);
++
++ if (net_cf_vx_mode) {
++ gpio_set_value(GPIO_GUMSTIX_CF_OLD_RESET, 0);
++ gpio_free(GPIO_GUMSTIX_CF_OLD_RESET);
++ } else {
++ gpio_set_value(GPIO_GUMSTIX_CF_RESET, 0);
++ gpio_free(GPIO_GUMSTIX_CF_RESET);
++ }
++
++ printk(KERN_INFO "found %d CF slots\n", pcmcia_cf_nr);
++
++ gpio_free(GPIO_GUMSTIX_nPCE_2);
++ gpio_free(GPIO_GUMSTIX_nPCE_1);
++ gpio_free(GPIO_GUMSTIX_nPOE);
++ return;
++}
++
++#define SMC_IO_EXTENT 16
++#define BANK_SELECT 14
++
++static void __init verdex_pcmcia_pin_config(void)
++{
++ struct resource *res;
++ void *network_controller_memory;
++ struct platform_device *pdev = &verdex_smsc911x_device;
++
++ printk(KERN_INFO "Initializing Gumstix verdex pcmcia\n");
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (res == NULL) {
++ printk(KERN_ERR "no memory resource defined\n");
++ goto err_done;
++ }
++
++ res = request_mem_region(res->start, SMC_IO_EXTENT, "smc91x probe");
++ if (res == NULL) {
++ printk(KERN_ERR "failed to request memory resource\n");
++ goto err_done;
++ }
++
++ // We check for the possibility of SMSC91c111 (reg base offset 0x300 from CS1 base)
++ network_controller_memory = ioremap(res->start + 0x300, SMC_IO_EXTENT);
++ if (network_controller_memory == NULL) {
++ printk(KERN_ERR "failed to ioremap() registers\n");
++ goto err_free_mem;
++ }
++
++ // Look for the special 91c111 value in the bank select register
++ if((0xff00 & readw(network_controller_memory+BANK_SELECT)) == 0x3300) {
++ printk(KERN_INFO "Detected netCF-vx board: pcmcia using older GPIO configuration\n");
++ net_cf_vx_mode = 1;
++ } else {
++ printk(KERN_INFO "Not netCF-vx board: pcmcia using newer GPIO configuration\n");
++ net_cf_vx_mode = 0;
++ }
++
++ iounmap(network_controller_memory);
++err_free_mem:
++ release_mem_region(res->start, SMC_IO_EXTENT);
++err_done:
++
++ gumstix_count_cards(); // this can update pcmcia_cf_nr
++
++ // If pcmcia_cf_nr is 1 then we do not have 2 CF slots
++ // Note: logic sequence was altered from previous kernel revs
++ // so that this works as intended now.
++ if (pcmcia_cf_nr != 0)
++ {
++ pxa2xx_mfp_config(ARRAY_AND_SIZE(gpio_ntschg_0));
++
++ if(net_cf_vx_mode)
++ pxa2xx_mfp_config(gpio_prdy_nbsy_old, 1);
++ else
++ pxa2xx_mfp_config(gpio_prdy_nbsy, 1);
++
++ } else {
++ // Note: this reconfigures pin GPIO18 to be GPIO-IN so make
++ // sure that this only gets done for the old dual slot board
++ // since that pin is an active AF1 out-mode signal (RDY) on
++ // newer boards and changing the pin mode on the newer boards
++ // would result in memory corruption for the NIC (and hang during
++ // PHY test).
++ pxa2xx_mfp_config(ARRAY_AND_SIZE(gpio_ntschg_1));
++ }
++
++ pxa2xx_mfp_config(ARRAY_AND_SIZE(gpio_nhw_init));
++ return;
++}
++
++int __init gumstix_get_cf_cards(void)
++{
++ return pcmcia_cf_nr;
++}
++EXPORT_SYMBOL(gumstix_get_cf_cards);
++
++#ifdef CONFIG_MACH_GUMSTIX_VERDEX
++int __init gumstix_check_if_netCF_vx(void)
++{
++ return net_cf_vx_mode;
++}
++EXPORT_SYMBOL(gumstix_check_if_netCF_vx);
++#endif
++
++#endif
++
++#if defined(CONFIG_FB_PXA_SHARP_LQ043_PSP) || defined(CONFIG_FB_PXA_SAMSUNG_LTE430WQ_F0C)
++static void gumstix_lcd_backlight(int on_or_off)
++{
++ int err;
++ err = gpio_request(17, "LCD BACKLIGHT");
++ if (err) {
++ //pr_warning("Gumstix Verdex: Failed to request LCD Backlight gpio\n");
++ return;
++ }
++
++ if(on_or_off) {
++ gpio_direction_input(17);
++ } else {
++ gpio_set_value(17, 0);
++ gpio_direction_output(17, 0);
++ gpio_set_value(17, 0);
++ }
++
++ return;
++}
++#endif
++
++#ifdef CONFIG_FB_PXA_ALPS_CDOLLAR
++static struct pxafb_mode_info gumstix_fb_mode = {
++ .pixclock = 300000,
++ .xres = 240,
++ .yres = 320,
++ .bpp = 16,
++ .hsync_len = 2,
++ .left_margin = 1,
++ .right_margin = 1,
++ .vsync_len = 3,
++ .upper_margin = 0,
++ .lower_margin = 0,
++ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++};
++
++static struct pxafb_mach_info gumstix_fb_info = {
++ .modes = &gumstix_fb_mode,
++ .num_modes = 1,
++ .lccr0 = LCCR0_Pas | LCCR0_Sngl | LCCR0_Color,
++ .lccr3 = LCCR3_PixFlEdg,
++};
++#elif defined(CONFIG_FB_PXA_SHARP_LQ043_PSP)
++static struct pxafb_mode_info gumstix_fb_mode = {
++ .pixclock = 110000,
++ .xres = 480,
++ .yres = 272,
++ .bpp = 16,
++ .hsync_len = 41,
++ .left_margin = 2,
++ .right_margin = 2,
++ .vsync_len = 10,
++ .upper_margin = 2,
++ .lower_margin = 2,
++ .sync = 0, // Hsync and Vsync both active low
++};
++
++static struct pxafb_mach_info gumstix_fb_info = {
++ .modes = &gumstix_fb_mode,
++ .num_modes = 1,
++ .lccr0 = LCCR0_Act | LCCR0_Sngl | LCCR0_Color,
++ .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg | (0 << 30),
++ .pxafb_backlight_power = &gumstix_lcd_backlight,
++};
++#elif defined(CONFIG_FB_PXA_SAMSUNG_LTE430WQ_F0C)
++static struct pxafb_mode_info gumstix_fb_mode = {
++ .pixclock = 108696, // 9.2MHz typical DOTCLK from datasheet
++ .xres = 480,
++ .hsync_len = 41, // HLW from datasheet: 41 typ
++ .left_margin = 4, // HBP - HLW from datasheet: 45 - 41 = 4
++ .right_margin = 8, // HFP from datasheet: 8 typ
++ .yres = 272,
++ .vsync_len = 10, // VLW from datasheet: 10 typ
++ .upper_margin = 2, // VBP - VLW from datasheet: 12 - 10 = 2
++ .lower_margin = 4, // VFP from datasheet: 4 typ
++ .bpp = 16,
++ .sync = 0, // Hsync and Vsync both active low
++};
++
++static struct pxafb_mach_info gumstix_fb_info = {
++ .modes = &gumstix_fb_mode,
++ .num_modes = 1,
++ .lccr0 = LCCR0_Act | LCCR0_Sngl | LCCR0_Color,
++ .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg | (0 << 30),
++ .pxafb_backlight_power = &gumstix_lcd_backlight,
++};
++#endif
++
++static struct platform_device verdex_audio_device = {
++ .name = "pxa2xx-ac97",
++ .id = -1,
++};
++
++static struct platform_device *devices[] __initdata = {
++ &gumstix_flash_device,
++ &verdex_audio_device,
++};
++
++/* PXA27x OHCI controller setup */
++#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
++static int ohci_verdex_init(struct device *dev)
++{
++ // Turn on port 2 in host mode
++ UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
++
++ /* See drivers/usb/host/ohci-pxa27x.c for further details but
++ ENABLE_PORT_ALL flag is equivalent to using this old sequence:
++ UHCHR = (UHCHR) &
++ ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
++ */
++ return 0;
++}
++
++static struct pxaohci_platform_data verdex_ohci_platform_data = {
++ .port_mode = PMM_PERPORT_MODE,
++ .flags = ENABLE_PORT_ALL,
++ .init = ohci_verdex_init,
++};
++
++static void __init verdex_ohci_init(void)
++{
++ pxa_set_ohci_info(&verdex_ohci_platform_data);
++}
++#else
++static void __init verdex_ohci_init(void) {
++ printk(KERN_INFO "Gumstix verdex host usb ohci is disabled\n");
++}
++#endif
++
++
++#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
++static struct pxamci_platform_data verdex_mci_platform_data;
++
++static int verdex_mci_init(struct device *dev, irq_handler_t detect_int,
++ void *data)
++{
++ /* GPIO setup for MMC on the 120-pin connector is done in verdex_init.
++ * There is no card detect on a uSD connector so no interrupt to
++ * register. There is no WP detect GPIO line either.
++ */
++
++ return 0;
++}
++
++static struct pxamci_platform_data verdex_mci_platform_data = {
++ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
++ .init = verdex_mci_init,
++ .gpio_card_detect = -1,
++ .gpio_card_ro = -1,
++ .gpio_power = -1,
++};
++
++static void __init verdex_mmc_init(void)
++{
++ pxa_set_mci_info(&verdex_mci_platform_data);
++}
++#else
++static void __init verdex_mmc_init(void)
++{
++ printk(KERN_INFO "Gumstix verdex mmc disabled\n");
++}
++#endif
++
++#if defined(CONFIG_USB_GADGET_PXA2XX) || defined(CONFIG_USB_GADGET_PXA2XX_MODULE)
++static struct pxa2xx_udc_mach_info verdex_udc_info __initdata = {
++ .gpio_vbus = GPIO35,
++ .gpio_pullup = GPIO41,
++};
++
++static void __init verdex_udc_init(void)
++{
++ pxa_set_udc_info(&verdex_udc_info);
++}
++#else
++static void __init verdex_udc_init(void)
++{
++ printk(KERN_INFO "Gumstix verdex udc is disabled\n");
++}
++#endif
++
++#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
++
++#if defined(CONFIG_TOUCHSCREEN_TSC2003) || defined(CONFIG_TOUCHSCREEN_TSC2003_MODULE)
++
++#define VERDEX_GPIO_PENDOWN 16
++
++static int tsc2003_init_platform_hw(void)
++{
++ return 0;
++}
++
++static void tsc2003_exit_platform_hw(void)
++{
++ return;
++}
++
++static void tsc2003_clear_penirq(void)
++{
++ return;
++}
++
++static int tsc2003_get_pendown_state(void)
++{
++ return !gpio_get_value(VERDEX_GPIO_PENDOWN);
++}
++
++static struct tsc2007_platform_data tsc2003_config = {
++ .model = 2003,
++ .x_plate_ohms = 100,
++ .get_pendown_state = tsc2003_get_pendown_state,
++ .clear_penirq = tsc2003_clear_penirq,
++ .init_platform_hw = tsc2003_init_platform_hw,
++ .exit_platform_hw = tsc2003_exit_platform_hw,
++};
++#endif
++
++static struct i2c_board_info __initdata verdex_i2c_board_info[] = {
++#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
++ {
++ I2C_BOARD_INFO("rtc-ds1307", 0x68),
++ },
++#endif
++#if defined(CONFIG_TOUCHSCREEN_TSC2003) || defined(CONFIG_TOUCHSCREEN_TSC2003_MODULE)
++ {
++ I2C_BOARD_INFO("tsc2003", 0x48),
++ .platform_data = &tsc2003_config,
++ .irq = IRQ_GPIO(VERDEX_GPIO_PENDOWN),
++ },
++#endif
++};
++
++static struct i2c_pxa_platform_data verdex_i2c_pwr_info = {
++ .fast_mode = 1,
++};
++
++static struct i2c_pxa_platform_data verdex_i2c_info = {
++ .fast_mode = 1,
++};
++
++static void __init verdex_i2c_init(void)
++{
++ printk(KERN_INFO "Initializing Gumstix verdex i2c\n");
++
++#if defined(CONFIG_TOUCHSCREEN_TSC2003) || defined(CONFIG_TOUCHSCREEN_TSC2003_MODULE)
++ if ((gpio_request(VERDEX_GPIO_PENDOWN, "TSC2003_PENDOWN") == 0) &&
++ (gpio_direction_input(VERDEX_GPIO_PENDOWN) == 0)) {
++ gpio_export(VERDEX_GPIO_PENDOWN, 0);
++ } else {
++ printk(KERN_ERR "could not obtain gpio for TSC2003_PENDOWN\n");
++ return;
++ }
++#endif
++
++ i2c_register_board_info(0, verdex_i2c_board_info,
++ ARRAY_SIZE(verdex_i2c_board_info));
++ pxa_set_i2c_info(&verdex_i2c_info);
++ pxa27x_set_i2c_power_info(&verdex_i2c_pwr_info);
++}
++#else
++static inline void verdex_i2c_init(void) {}
++#endif
++
++#if defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
++static void __init verdex_pcmcia_init(void)
++{
++ verdex_pcmcia_pin_config();
++}
++#else
++static void __init verdex_pcmcia_init(void) {
++ printk(KERN_INFO "Gumstix verdex pcmcia is disabled\n");
++}
++#endif
++
++
++static void __init verdex_init(void)
++{
++ pxa2xx_mfp_config(ARRAY_AND_SIZE(verdex_pin_config));
++
++#ifdef CONFIG_FB_PXA_SHARP_LQ043_PSP
++ /* DISP must be always high while screen is on */
++ gpio_direction_output(GPIO77, 0);
++ gpio_set_value(GPIO77, 1);
++#endif
++ verdex_udc_init();
++ verdex_mmc_init();
++ verdex_ohci_init();
++ verdex_i2c_init();
++ verdex_init_smsc911x();
++ verdex_pcmcia_init();
++
++#if defined(CONFIG_FB_PXA_ALPS_CDOLLAR) || defined(CONFIG_FB_PXA_SHARP_LQ043_PSP) || defined(CONFIG_FB_PXA_SAMSUNG_LTE430WQ_F0C)
++ printk(KERN_INFO "Initializing Gumstix verdex FB info\n");
++ set_pxa_fb_info(&gumstix_fb_info);
++#endif
++ printk(KERN_INFO "Initializing Gumstix platform_add_devices\n");
++ (void) platform_add_devices(devices, ARRAY_SIZE(devices));
++}
++
++MACHINE_START(GUMSTIX, "Gumstix verdex")
++ .atag_offset = 0x100, /* match u-boot bi_boot_params */
++ .map_io = pxa27x_map_io,
++ .init_irq = pxa27x_init_irq,
++ .handle_irq = pxa27x_handle_irq,
++ .init_time = pxa_timer_init,
++ .init_machine = verdex_init,
++ .restart = pxa_restart,
++MACHINE_END
+--- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
++++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+@@ -109,6 +109,7 @@
+ #define GPIO54_nPCE_2 MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
+ #define GPIO78_nPCE_2 MFP_CFG_OUT(GPIO78, AF1, DRIVE_HIGH)
+ #define GPIO87_nPCE_2 MFP_CFG_IN(GPIO87, AF1)
++#define GPIO105_nPCE_2 MFP_CFG_OUT(GPIO105, AF1, DRIVE_HIGH)
+ #define GPIO55_nPREG MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
+ #define GPIO50_nPIOR MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
+ #define GPIO51_nPIOW MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
diff --git a/target/linux/pxa/patches-3.10/002-verdex_lcd_support.patch b/target/linux/pxa/patches-3.10/002-verdex_lcd_support.patch
new file mode 100644
index 0000000000..bfba17e0cb
--- /dev/null
+++ b/target/linux/pxa/patches-3.10/002-verdex_lcd_support.patch
@@ -0,0 +1,52 @@
+From eb92a178eceae4e5d18bbb442b8e44cb88457d60 Mon Sep 17 00:00:00 2001
+From: Joseph Kortje <jpktech@rogers.com>
+Date: Wed, 28 Oct 2009 21:25:57 -0400
+Subject: [PATCH] [ARM] Gumstix Verdex LCD config options
+
+add options to Kconfig for Verdex LCD support
+
+Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
+---
+ drivers/video/Kconfig | 31 +++++++++++++++++++++++++++++++
+ 1 files changed, 31 insertions(+), 0 deletions(-)
+
+--- a/drivers/video/Kconfig
++++ b/drivers/video/Kconfig
+@@ -1905,6 +1905,37 @@ config FB_PXA
+ say M here and read <file:Documentation/kbuild/modules.txt>.
+
+ If unsure, say N.
++choice
++ depends on FB_PXA
++ prompt "LCD Panel"
++ default FB_PXA_SAMSUNG_LTE430WQ_F0C
++
++config FB_PXA_ALPS_CDOLLAR
++ boolean "Chris Dollar's ALPS screen"
++ ---help---
++ Enable definitions (over-ridable on the kernel command line if
++ "PXA LCD command line parameters" is also selected) for an ALPS
++ screen which Chris Dollar uses
++
++config FB_PXA_SHARP_LQ043_PSP
++ boolean "SHARP LQ043... series"
++ ---help---
++ Enable definitions (over-ridable on the kernel command line if
++ "PXA LCD command line parameters" is also selected) for a SHARP
++ LQ043... screen, such as the one used by the PSP. These screens are
++ the ones normally sold by gumstix with its boards.
++
++config FB_PXA_SAMSUNG_LTE430WQ_F0C
++ boolean "Samsung LTE430WQ-F0C (standard gumstix LCD)"
++ ---help---
++ Enable definitions for a Samsung LTE430WQ-F0C LCD panel, such as the ones resold
++ by gumstix for use with their "LCD-Ready" boards.
++
++config FB_PXA_NONEOFTHEABOVE
++ boolean "None of the above"
++
++endchoice
++
+
+ config FB_PXA_OVERLAY
+ bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
diff --git a/target/linux/pxa/patches-3.10/003-gumstix_h_verdex_pro_support.patch b/target/linux/pxa/patches-3.10/003-gumstix_h_verdex_pro_support.patch
new file mode 100644
index 0000000000..6dd291d483
--- /dev/null
+++ b/target/linux/pxa/patches-3.10/003-gumstix_h_verdex_pro_support.patch
@@ -0,0 +1,214 @@
+From adb6abbe4e3bc17c20cdc70e4a4357f1633d4970 Mon Sep 17 00:00:00 2001
+From: Joseph Kortje <jpktech@rogers.com>
+Date: Wed, 28 Oct 2009 21:49:11 -0400
+Subject: [PATCH] [ARM] gumstix.h: Verdex Pro support
+
+Added a bunch of ifdefs to support both original gumstix boards
+as well as the Verdex Pro in gumstix.h
+
+Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
+---
+ arch/arm/mach-pxa/include/mach/gumstix.h | 160 ++++++++++++++++++++++++------
+ 1 files changed, 130 insertions(+), 30 deletions(-)
+
+--- a/arch/arm/mach-pxa/include/mach/gumstix.h
++++ b/arch/arm/mach-pxa/include/mach/gumstix.h
+@@ -6,6 +6,9 @@
+ * published by the Free Software Foundation.
+ */
+
++#if !defined(__ASM_ARCH_MFP_PXA27X_H) && !defined(__ASM_ARCH_MFP_PXA25X_H)
++ #error You need to include either mfp-pxa27x.h or mfp-pxa25x.h
++#endif
+
+ /* BTRESET - Reset line to Bluetooth module, active low signal. */
+ #define GPIO_GUMSTIX_BTRESET 7
+@@ -20,9 +23,18 @@ this moves to GPIO17 and GPIO37. */
+ /* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn
+ has detected a cable insertion; driven low otherwise. */
+
++#ifndef CONFIG_MACH_GUMSTIX_VERDEX
++
+ #define GPIO_GUMSTIX_USB_GPIOn 35
+ #define GPIO_GUMSTIX_USB_GPIOx 41
+
++#else
++
++#define GPIO_GUMSTIX_USB_GPIOn 100
++#define GPIO_GUMSTIX_USB_GPIOx 27
++
++#endif
++
+ /* usb state change */
+ #define GUMSTIX_USB_INTR_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_USB_GPIOn)
+
+@@ -42,48 +54,136 @@ has detected a cable insertion; driven l
+ * ETH_RST provides a hardware reset line to the ethernet chip
+ * ETH is the IRQ line in from the ethernet chip to the PXA
+ */
++#ifndef CONFIG_MACH_GUMSTIX_VERDEX
+ #define GPIO_GUMSTIX_ETH0_RST 80
+-#define GPIO_GUMSTIX_ETH0_RST_MD (GPIO_GUMSTIX_ETH0_RST | GPIO_OUT)
++#define GPIO_GUMSTIX_ETH0 36
++#else
++#define GPIO_GUMSTIX_ETH0_RST 107
++#define GPIO_GUMSTIX_ETH0 99
++#endif
+ #define GPIO_GUMSTIX_ETH1_RST 52
+-#define GPIO_GUMSTIX_ETH1_RST_MD (GPIO_GUMSTIX_ETH1_RST | GPIO_OUT)
++#define GPIO_GUMSTIX_ETH1 27
+
+-#define GPIO_GUMSTIX_ETH0 36
++#define GPIO_GUMSTIX_ETH0_RST_MD (GPIO_GUMSTIX_ETH0_RST | GPIO_OUT)
++#define GPIO_GUMSTIX_ETH1_RST_MD (GPIO_GUMSTIX_ETH1_RST | GPIO_OUT)
+ #define GPIO_GUMSTIX_ETH0_MD (GPIO_GUMSTIX_ETH0 | GPIO_IN)
+-#define GUMSTIX_ETH0_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH0)
+-#define GPIO_GUMSTIX_ETH1 27
+ #define GPIO_GUMSTIX_ETH1_MD (GPIO_GUMSTIX_ETH1 | GPIO_IN)
+-#define GUMSTIX_ETH1_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH1)
+-
+
+-/* CF reset line */
+-#define GPIO8_RESET 8
++#define GUMSTIX_ETH0_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH0)
++#define GUMSTIX_ETH1_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH1)
+
+-/* CF slot 0 */
+-#define GPIO4_nBVD1 4
+-#define GPIO4_nSTSCHG GPIO4_nBVD1
+-#define GPIO11_nCD 11
+-#define GPIO26_PRDY_nBSY 26
+-#define GUMSTIX_S0_nSTSCHG_IRQ PXA_GPIO_TO_IRQ(GPIO4_nSTSCHG)
+-#define GUMSTIX_S0_nCD_IRQ PXA_GPIO_TO_IRQ(GPIO11_nCD)
+-#define GUMSTIX_S0_PRDY_nBSY_IRQ PXA_GPIO_TO_IRQ(GPIO26_PRDY_nBSY)
++ /* CF reset line */
++#define GPIO8_CF_RESET 8
++#define GPIO97_CF_RESET 97
++#define GPIO110_CF_RESET 110
++
++#ifndef CONFIG_MACH_GUMSTIX_VERDEX
++#define GPIO_GUMSTIX_CF_RESET GPIO8_CF_RESET
++#else
++#define GPIO_GUMSTIX_CF_RESET GPIO97_CF_RESET
++#endif
++
++#define GPIO_GUMSTIX_CF_OLD_RESET GPIO110_CF_RESET
++
++/* CF signals shared by both sockets */
++#define GPIO_GUMSTIX_nPOE 48
++#define GPIO_GUMSTIX_nPWE 49
++#define GPIO_GUMSTIX_nPIOR 50
++#define GPIO_GUMSTIX_nPIOW 51
++
++#ifndef CONFIG_MACH_GUMSTIX_VERDEX
++#define GPIO_GUMSTIX_nPCE_1 52
++#define GPIO_GUMSTIX_nPCE_2 53
++#define GPIO_GUMSTIX_pSKTSEL 54
++#else
++#define GPIO_GUMSTIX_nPCE_1 102
++#define GPIO_GUMSTIX_nPCE_2 105
++#define GPIO_GUMSTIX_pSKTSEL 79
++#endif
++
++#define GPIO_GUMSTIX_nPREG 55
++#define GPIO_GUMSTIX_nPWAIT 56
++#define GPIO_GUMSTIX_nIOIS16 57
++
++/* Pin mode definitions correspond to mfp-pxa2[57]x.h */
++#define GPIO_GUMSTIX_nPOE_MD GPIO48_nPOE
++#define GPIO_GUMSTIX_nPWE_MD GPIO49_nPWE
++#define GPIO_GUMSTIX_nPIOR_MD GPIO50_nPIOR
++#define GPIO_GUMSTIX_nPIOW_MD GPIO51_nPIOW
++
++#ifndef CONFIG_MACH_GUMSTIX_VERDEX
++#define GPIO_GUMSTIX_nPCE_1_MD GPIO52_nPCE_1
++#define GPIO_GUMSTIX_nPCE_2_MD GPIO53_nPCE_2
++#define GPIO_GUMSTIX_pSKTSEL_MD GPIO54_pSKTSEL
++#else
++#define GPIO_GUMSTIX_nPCE_1_MD GPIO102_nPCE_1
++#define GPIO_GUMSTIX_nPCE_2_MD GPIO105_nPCE_2
++#define GPIO_GUMSTIX_pSKTSEL_MD GPIO79_pSKTSEL
++#endif
++
++#define GPIO_GUMSTIX_nPREG_MD GPIO55_nPREG
++#define GPIO_GUMSTIX_nPWAIT_MD GPIO56_nPWAIT
++#define GPIO_GUMSTIX_nIOIS16_MD GPIO57_nIOIS16
++
++ /* CF slot 0 */
++#define GPIO4_nBVD1_0 4
++#define GPIO4_nSTSCHG_0 GPIO4_nBVD1_0
++#define GPIO11_nCD_0 11
++#define GPIO26_PRDY_nBSY_0 26
++
++#define GPIO111_nBVD1_0 111
++#define GPIO111_nSTSCHG_0 GPIO111_nBVD1_0
++#define GPIO104_nCD_0 104
++#define GPIO96_PRDY_nBSY_0 96
++#define GPIO109_PRDY_nBSY_0 109
++
++#ifndef CONFIG_MACH_GUMSTIX_VERDEX
++#define GPIO_GUMSTIX_nBVD1_0 GPIO4_nBVD1_0
++#define GPIO_GUMSTIX_nSTSCHG_0 GPIO4_nSTSCHG_0
++#define GPIO_GUMSTIX_nCD_0 GPIO11_nCD_0
++#define GPIO_GUMSTIX_PRDY_nBSY_0 GPIO26_PRDY_nBSY_0
++#else
++#define GPIO_GUMSTIX_nBVD1_0 GPIO111_nBVD1_0
++#define GPIO_GUMSTIX_nSTSCHG_0 GPIO111_nSTSCHG_0
++#define GPIO_GUMSTIX_nCD_0 GPIO104_nCD_0
++#define GPIO_GUMSTIX_PRDY_nBSY_0 GPIO96_PRDY_nBSY_0
++#endif
++
++#define GPIO_GUMSTIX_PRDY_nBSY_0_OLD GPIO109_PRDY_nBSY_0
++#define GUMSTIX_S0_PRDY_nBSY_OLD_IRQ PXA_GPIO_TO_IRQ(GPIO109_PRDY_nBSY_0)
++
++#define GUMSTIX_S0_nSTSCHG_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_nSTSCHG_0)
++#define GUMSTIX_S0_nCD_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_nCD_0)
++#define GUMSTIX_S0_PRDY_nBSY_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_PRDY_nBSY_0)
+
+ /* CF slot 1 */
+-#define GPIO18_nBVD1 18
+-#define GPIO18_nSTSCHG GPIO18_nBVD1
+-#define GPIO36_nCD 36
+-#define GPIO27_PRDY_nBSY 27
+-#define GUMSTIX_S1_nSTSCHG_IRQ PXA_GPIO_TO_IRQ(GPIO18_nSTSCHG)
+-#define GUMSTIX_S1_nCD_IRQ PXA_GPIO_TO_IRQ(GPIO36_nCD)
+-#define GUMSTIX_S1_PRDY_nBSY_IRQ PXA_GPIO_TO_IRQ(GPIO27_PRDY_nBSY)
+-
+-/* CF GPIO line modes */
+-#define GPIO4_nSTSCHG_MD (GPIO4_nSTSCHG | GPIO_IN)
+-#define GPIO8_RESET_MD (GPIO8_RESET | GPIO_OUT)
+-#define GPIO11_nCD_MD (GPIO11_nCD | GPIO_IN)
+-#define GPIO18_nSTSCHG_MD (GPIO18_nSTSCHG | GPIO_IN)
+-#define GPIO26_PRDY_nBSY_MD (GPIO26_PRDY_nBSY | GPIO_IN)
+-#define GPIO27_PRDY_nBSY_MD (GPIO27_PRDY_nBSY | GPIO_IN)
+-#define GPIO36_nCD_MD (GPIO36_nCD | GPIO_IN)
++#define GPIO18_nBVD1_1 18
++#define GPIO18_nSTSCHG_1 GPIO18_nBVD1_1
++#define GPIO36_nCD_1 36
++#define GPIO27_PRDY_nBSY_1 27
++
++#define GPIO_GUMSTIX_nBVD1_1 GPIO18_nBVD1_1
++#define GPIO_GUMSTIX_nSTSCHG_1 GPIO18_nSTSCHG_1
++#define GPIO_GUMSTIX_nCD_1 GPIO36_nCD_1
++#define GPIO_GUMSTIX_PRDY_nBSY_1 GPIO27_PRDY_nBSY_1
++
++#define GUMSTIX_S1_nSTSCHG_IRQ PXA_GPIO_TO_IRQ(GPIO18_nSTSCHG_1)
++#define GUMSTIX_S1_nCD_IRQ PXA_GPIO_TO_IRQ(GPIO36_nCD_1)
++#define GUMSTIX_S1_PRDY_nBSY_IRQ PXA_GPIO_TO_IRQ(GPIO27_PRDY_nBSY_1)
++
++/* CF GPIO line modes - correspond to mfp-pxa2[57]x.h */
++#define GPIO_GUMSTIX_CF_RESET_MD (GPIO_GUMSTIX_CF_RESET | GPIO_OUT)
++#define GPIO_GUMSTIX_CF_OLD_RESET_MD (GPIO_GUMSTIX_CF_OLD_RESET | GPIO_OUT)
++
++#define GPIO_GUMSTIX_nSTSCHG_0_MD GPIO111_GPIO
++#define GPIO_GUMSTIX_nCD_0_MD GPIO104_GPIO
++
++#define GPIO_GUMSTIX_PRDY_nBSY_0_MD GPIO96_GPIO
++#define GPIO_GUMSTIX_PRDY_nBSY_0_OLD_MD GPIO109_GPIO
++
++#define GPIO_GUMSTIX_nSTSCHG_1_MD GPIO18_GPIO
++#define GPIO_GUMSTIX_nCD_1_MD GPIO36_GPIO
++#define GPIO_GUMSTIX_PRDY_nBSY_1_MD GPIO27_GPIO
+
+ /* for expansion boards that can't be programatically detected */
+ extern int am200_init(void);
diff --git a/target/linux/pxa/patches-3.10/004-smsc911x_verdex_pro_support.patch b/target/linux/pxa/patches-3.10/004-smsc911x_verdex_pro_support.patch
new file mode 100644
index 0000000000..ace44df15f
--- /dev/null
+++ b/target/linux/pxa/patches-3.10/004-smsc911x_verdex_pro_support.patch
@@ -0,0 +1,108 @@
+From 7645a459feb02f7aae4c3a5724b7800495d1b659 Mon Sep 17 00:00:00 2001
+From: Bobby Powers <bobbypowers@gmail.com>
+Date: Wed, 28 Oct 2009 22:41:31 -0400
+Subject: [PATCH] [ARM] smsc911x: Verdex Pro support
+
+Basically Joseph Kortje's patch, cleaned up to apply to Linus's
+tree. Some of the smsc911x.c had been applied already
+
+Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
+---
+ drivers/net/smsc911x.c | 50 +++++++++++++++++++++++++++++++++++++--------
+ drivers/net/smsc911x.h | 2 +-
+ include/linux/smsc911x.h | 11 ++++++++++
+ 3 files changed, 53 insertions(+), 10 deletions(-)
+
+--- a/drivers/net/ethernet/smsc/smsc911x.c
++++ b/drivers/net/ethernet/smsc/smsc911x.c
+@@ -60,6 +60,7 @@
+ #include <linux/of_device.h>
+ #include <linux/of_gpio.h>
+ #include <linux/of_net.h>
++#include <asm/system_info.h>
+ #include "smsc911x.h"
+
+ #define SMSC_CHIPNAME "smsc911x"
+@@ -1514,7 +1515,7 @@ static int smsc911x_open(struct net_devi
+ SMSC_WARN(pdata, ifup,
+ "Timed out waiting for EEPROM busy bit to clear");
+
+- smsc911x_reg_write(pdata, GPIO_CFG, 0x70070000);
++ smsc911x_reg_write(pdata, GPIO_CFG, GPIO_CFG_LED1_EN_ | GPIO_CFG_LED2_EN_ | (1 << 20));
+
+ /* The soft reset above cleared the device's MAC address,
+ * restore it from local copy (set in probe) */
+@@ -1525,8 +1526,8 @@ static int smsc911x_open(struct net_devi
+ /* Initialise irqs, but leave all sources disabled */
+ smsc911x_disable_irq_chip(dev);
+
+- /* Set interrupt deassertion to 100uS */
+- intcfg = ((10 << 24) | INT_CFG_IRQ_EN_);
++ /* Set interrupt deassertion to 22*10uS */
++ intcfg = ((22 << 24) | INT_CFG_IRQ_EN_);
+
+ if (pdata->config.irq_polarity) {
+ SMSC_TRACE(pdata, ifup, "irq polarity: active high");
+@@ -1552,7 +1553,7 @@ static int smsc911x_open(struct net_devi
+ temp |= INT_EN_SW_INT_EN_;
+ smsc911x_reg_write(pdata, INT_EN, temp);
+
+- timeout = 1000;
++ timeout = 2000;
+ while (timeout--) {
+ if (pdata->software_irq_signal)
+ break;
+@@ -2370,6 +2371,38 @@ static inline int smsc911x_probe_config_
+ }
+ #endif /* CONFIG_OF */
+
++static inline unsigned int is_gumstix_oui(u8 *addr)
++{
++ return (addr[0] == 0x00 && addr[1] == 0x15 && addr[2] == 0xC9);
++}
++
++/**
++ * gen_serial_ether_addr - Generate software assigned Ethernet address
++ * based on the system_serial number
++ * @addr: Pointer to a six-byte array containing the Ethernet address
++ *
++ * Generate an Ethernet address (MAC) that is not multicast
++ * and has the local assigned bit set, keyed on the system_serial
++ */
++static inline void gen_serial_ether_addr(u8 *addr)
++{
++ static u8 ether_serial_digit = 0;
++ addr [0] = system_serial_high >> 8;
++ addr [1] = system_serial_high;
++ addr [2] = system_serial_low >> 24;
++ addr [3] = system_serial_low >> 16;
++ addr [4] = system_serial_low >> 8;
++ addr [5] = (system_serial_low & 0xc0) | /* top bits are from system serial */
++ (1 << 4) | /* 2 bits identify interface type 1=ether, 2=usb, 3&4 undef */
++ ((ether_serial_digit++) & 0x0f); /* 15 possible interfaces of each type */
++
++ if(!is_gumstix_oui(addr))
++ {
++ addr [0] &= 0xfe; /* clear multicast bit */
++ addr [0] |= 0x02; /* set local assignment bit (IEEE802) */
++ }
++}
++
+ static int smsc911x_drv_probe(struct platform_device *pdev)
+ {
+ struct device_node *np = pdev->dev.of_node;
+@@ -2516,11 +2549,11 @@ static int smsc911x_drv_probe(struct pla
+ SMSC_TRACE(pdata, probe,
+ "Mac Address is read from LAN911x EEPROM");
+ } else {
+- /* eeprom values are invalid, generate random MAC */
+- eth_hw_addr_random(dev);
++ /* eeprom values are invalid, generate MAC from serial number */
++ gen_serial_ether_addr(dev->dev_addr);
+ smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
+ SMSC_TRACE(pdata, probe,
+- "MAC Address is set to eth_random_addr");
++ "MAC Address is derived from system serial number");
+ }
+ }
+
diff --git a/target/linux/pxa/patches-3.10/005-verdex_pcmcia_support.patch b/target/linux/pxa/patches-3.10/005-verdex_pcmcia_support.patch
new file mode 100644
index 0000000000..d79dd4f46b
--- /dev/null
+++ b/target/linux/pxa/patches-3.10/005-verdex_pcmcia_support.patch
@@ -0,0 +1,209 @@
+From 76a102bd5c9d792db19c6c72eafdecea0311a0c9 Mon Sep 17 00:00:00 2001
+From: Craig Hughes <craig@gumstix.com>
+Date: Fri, 30 Oct 2009 14:16:27 -0400
+Subject: [PATCH] [ARM] pxa: Gumstix Verdex PCMCIA support
+
+Needed for the Libertas CS wireless device.
+
+Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
+---
+ drivers/pcmcia/Kconfig | 3 +-
+ drivers/pcmcia/Makefile | 3 +
+ drivers/pcmcia/pxa2xx_gumstix.c | 194 +++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 199 insertions(+), 1 deletions(-)
+ create mode 100644 drivers/pcmcia/pxa2xx_gumstix.c
+
+--- a/drivers/pcmcia/Kconfig
++++ b/drivers/pcmcia/Kconfig
+@@ -217,7 +217,7 @@ config PCMCIA_PXA2XX
+ || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
+ || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
+ || MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI \
+- || MACH_COLIBRI320 || MACH_H4700)
++ || MACH_COLIBRI320 || MACH_H4700 || ARCH_GUMSTIX)
+ select PCMCIA_SA1111 if ARCH_LUBBOCK && SA1111
+ select PCMCIA_SOC_COMMON
+ help
+--- a/drivers/pcmcia/Makefile
++++ b/drivers/pcmcia/Makefile
+@@ -71,6 +71,9 @@ pxa2xx-obj-$(CONFIG_MACH_COLIBRI) += px
+ pxa2xx-obj-$(CONFIG_MACH_COLIBRI320) += pxa2xx_colibri.o
+ pxa2xx-obj-$(CONFIG_MACH_H4700) += pxa2xx_hx4700.o
+
++pxa2xx-obj-$(CONFIG_MACH_GUMSTIX_VERDEX) += pxa2xx_cs.o
++pxa2xx_cs-objs := pxa2xx_gumstix.o
++
+ obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_base.o $(pxa2xx-obj-y)
+
+ obj-$(CONFIG_PCMCIA_XXS1500) += xxs1500_ss.o
+--- /dev/null
++++ b/drivers/pcmcia/pxa2xx_gumstix.c
+@@ -0,0 +1,168 @@
++/*
++ * linux/drivers/pcmcia/pxa2xx_gumstix.c
++ *
++ * Gumstix PCMCIA specific routines. Based on Mainstone
++ *
++ * Copyright 2004, Craig Hughes <craig@gumstix.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/gpio.h>
++
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++
++#include <linux/gpio-pxa.h>
++
++#include <pcmcia/ss.h>
++
++#include <mach/hardware.h>
++#include <asm/mach-types.h>
++
++#include <mach/pxa27x.h>
++
++#include <asm/io.h>
++#include <mach/gpio.h>
++#include <mach/gumstix.h>
++#include "soc_common.h"
++
++#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
++
++#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
++#define GPLR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5))
++
++static int net_cf_vx_mode = 0;
++
++static int gumstix_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
++{
++/* Note: The verdex_pcmcia_pin_config is moved to gumstix_verdex.c in order to use mfp_pxa2xx_config
++ for board-specific pin configuration instead of the old deprecated pxa_gpio_mode function. Thus,
++ only the IRQ init is still needed to be done here. */
++ if (skt->nr == 0) {
++ skt->socket.pci_irq = (net_cf_vx_mode == 0) ? GUMSTIX_S0_PRDY_nBSY_IRQ : GUMSTIX_S0_PRDY_nBSY_OLD_IRQ;
++ skt->stat[SOC_STAT_CD].gpio = GUMSTIX_S0_nCD_IRQ;
++ skt->stat[SOC_STAT_CD].name = "CF0 nCD";
++ skt->stat[SOC_STAT_RDY].gpio = GUMSTIX_S0_nSTSCHG_IRQ;
++ skt->stat[SOC_STAT_RDY].name = "CF0 nSTSCHG";
++ } else {
++ skt->socket.pci_irq = GUMSTIX_S1_PRDY_nBSY_IRQ;
++ skt->stat[SOC_STAT_CD].gpio = GUMSTIX_S1_nCD_IRQ;
++ skt->stat[SOC_STAT_CD].name = "CF1 nCD";
++ skt->stat[SOC_STAT_RDY].gpio = GUMSTIX_S1_nSTSCHG_IRQ;
++ skt->stat[SOC_STAT_RDY].name = "CF1 nSTSCHG";
++ }
++
++ return 0;
++}
++
++static void gumstix_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
++{
++ if (net_cf_vx_mode) {
++ gpio_free(GPIO_GUMSTIX_CF_OLD_RESET);
++ } else {
++ gpio_free(GPIO_GUMSTIX_CF_RESET);
++ }
++
++}
++
++static void gumstix_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
++ struct pcmcia_state *state)
++{
++ unsigned int cd, prdy_nbsy, nbvd1;
++ if(skt->nr == 0)
++ {
++ cd = GPIO_GUMSTIX_nCD_0;
++ if(net_cf_vx_mode)
++ prdy_nbsy = GPIO_GUMSTIX_PRDY_nBSY_0_OLD;
++ else
++ prdy_nbsy = GPIO_GUMSTIX_PRDY_nBSY_0;
++ nbvd1 = GPIO_GUMSTIX_nBVD1_0;
++ } else {
++ cd = GPIO_GUMSTIX_nCD_1;
++ prdy_nbsy = GPIO_GUMSTIX_PRDY_nBSY_1;
++ nbvd1 = GPIO_GUMSTIX_nBVD1_1;
++ }
++ state->detect = !!gpio_get_value(cd);
++ state->ready = !!gpio_get_value(prdy_nbsy);
++ state->bvd1 = !!gpio_get_value(nbvd1);
++ state->bvd2 = 1;
++ state->vs_3v = 0;
++ state->vs_Xv = 0;
++ state->wrprot = 0;
++}
++
++static int gumstix_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
++ const socket_state_t *state)
++{
++ return 0;
++}
++
++static struct pcmcia_low_level gumstix_pcmcia_ops = {
++ .owner = THIS_MODULE,
++ .hw_init = gumstix_pcmcia_hw_init,
++ .hw_shutdown = gumstix_pcmcia_hw_shutdown,
++ .socket_state = gumstix_pcmcia_socket_state,
++ .configure_socket = gumstix_pcmcia_configure_socket,
++ .nr = 2,
++};
++
++static struct platform_device *gumstix_pcmcia_device;
++
++extern int __init gumstix_get_cf_cards(void);
++
++#ifdef CONFIG_MACH_GUMSTIX_VERDEX
++extern int __init gumstix_check_if_netCF_vx(void);
++#endif
++
++static int __init gumstix_pcmcia_init(void)
++{
++ int ret;
++
++#ifdef CONFIG_MACH_GUMSTIX_VERDEX
++ net_cf_vx_mode = gumstix_check_if_netCF_vx();
++#endif
++
++ gumstix_pcmcia_ops.nr = gumstix_get_cf_cards();
++
++ gumstix_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
++ if (!gumstix_pcmcia_device)
++ return -ENOMEM;
++
++ ret = platform_device_add_data(gumstix_pcmcia_device, &gumstix_pcmcia_ops,
++ sizeof(gumstix_pcmcia_ops));
++
++ if (ret == 0) {
++ printk(KERN_INFO "Registering gumstix PCMCIA interface.\n");
++ ret = platform_device_add(gumstix_pcmcia_device);
++ }
++
++ if (ret)
++ platform_device_put(gumstix_pcmcia_device);
++
++ return ret;
++}
++
++static void __exit gumstix_pcmcia_exit(void)
++{
++ /*
++ * This call is supposed to free our gumstix_pcmcia_device.
++ * Unfortunately platform_device don't have a free method, and
++ * we can't assume it's free of any reference at this point so we
++ * can't free it either.
++ */
++ platform_device_unregister(gumstix_pcmcia_device);
++}
++
++fs_initcall(gumstix_pcmcia_init);
++module_exit(gumstix_pcmcia_exit);
++
++MODULE_LICENSE("GPL");
diff --git a/target/linux/pxa/patches-3.10/a01-arm-debugll-printk.patch b/target/linux/pxa/patches-3.10/a01-arm-debugll-printk.patch
new file mode 100644
index 0000000000..874e5d302b
--- /dev/null
+++ b/target/linux/pxa/patches-3.10/a01-arm-debugll-printk.patch
@@ -0,0 +1,24 @@
+--- a/kernel/printk.c
++++ b/kernel/printk.c
+@@ -48,6 +48,10 @@
+
+ #include <asm/uaccess.h>
+
++#ifdef CONFIG_DEBUG_LL
++extern void printascii(char *);
++#endif /* CONFIG_DEBUG_LL */
++
+ #define CREATE_TRACE_POINTS
+ #include <trace/events/printk.h>
+
+@@ -1578,6 +1582,10 @@ asmlinkage int vprintk_emit(int facility
+ }
+ }
+
++#ifdef CONFIG_DEBUG_LL
++ printascii(printk_buf);
++#endif
++
+ if (level == -1)
+ level = default_message_loglevel;
+