pxa: moved to targets feed

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48217

6 files changed, 0 insertions, 1508 deletions

diff --git a/target/linux/pxa/patches-3.3/001-gumstix_verdex_pro_arch_support.patch b/target/linux/pxa/patches-3.3/001-gumstix_verdex_pro_arch_support.patch
deleted file mode 100644
index 9d1c0c2321..0000000000
--- a/target/linux/pxa/patches-3.3/001-gumstix_verdex_pro_arch_support.patch
+++ /dev/null
@@ -1,882 +0,0 @@
-From 4f4bb58cba3a6c44e9f9f113609287d9d50be9c4 Mon Sep 17 00:00:00 2001
-From: Joseph Kortje <jpktech@rogers.com>
-Date: Wed, 28 Oct 2009 21:11:28 -0400
-Subject: [PATCH] [ARM] Gumstix Verdex Pro arch support
-
-add an option for Verdex Pro when ARCH_GUMSTIX is selected, and
-factor earlier Gumstix support into a seperate option
-
-Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
----
- arch/arm/mach-pxa/Kconfig                   |   29 +-
- arch/arm/mach-pxa/Makefile                  |    3 +-
- arch/arm/mach-pxa/gumstix-verdex.c          |  749 +++++++++++++++++++++++++++
- arch/arm/mach-pxa/include/mach/mfp-pxa27x.h |    1 +
- 4 files changed, 772 insertions(+), 10 deletions(-)
- create mode 100644 arch/arm/mach-pxa/gumstix-verdex.c
-
---- a/arch/arm/mach-pxa/Kconfig
-+++ b/arch/arm/mach-pxa/Kconfig
-@@ -134,23 +134,34 @@ config MACH_CAPC7117
- 	select PXA3xx
- 
- config ARCH_GUMSTIX
--	bool "Gumstix XScale 255 boards"
--	select PXA25x
-+	bool "Gumstix boards"
- 	help
--	  Say Y here if you intend to run this kernel on
--	  Basix, Connex, ws-200ax, ws-400ax systems
-+        Say Y here if you intend to run this kernel on a
-+	  gumstix computer.
- 
--choice
--	prompt "Gumstix Carrier/Expansion Board"
- 	depends on ARCH_GUMSTIX
- 
--config GUMSTIX_AM200EPD
-+config MACH_GUMSTIX_F
-+	bool "Gumstix Basix/Connex ..."
-+	depends on ARCH_GUMSTIX
-+	select PXA25x
-+
-+ choice
-+	prompt "Gumstix Carrier/Expansion Board"
-+	depends on MACH_GUMSTIX_F
-+
-+ config GUMSTIX_AM200EPD
- 	bool "Enable AM200EPD board support"
- 
--config GUMSTIX_AM300EPD
-+ config GUMSTIX_AM300EPD
- 	bool "Enable AM300EPD board support"
- 
--endchoice
-+ endchoice
-+
-+config MACH_GUMSTIX_VERDEX
-+	bool "Gumstix VERDEX ..."
-+	depends on ARCH_GUMSTIX
-+	select PXA27x
- 
- config MACH_INTELMOTE2
- 	bool "Intel Mote 2 Platform"
---- a/arch/arm/mach-pxa/Makefile
-+++ b/arch/arm/mach-pxa/Makefile
-@@ -51,7 +51,8 @@ endif
- obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
- obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
- obj-$(CONFIG_MACH_CAPC7117)     += capc7117.o mxm8x10.o
--obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
-+obj-$(CONFIG_MACH_GUMSTIX_F)	+= gumstix.o
-+obj-$(CONFIG_MACH_GUMSTIX_VERDEX)	+= gumstix-verdex.o
- obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o
- obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
- obj-$(CONFIG_MACH_INTELMOTE2)	+= stargate2.o
---- /dev/null
-+++ b/arch/arm/mach-pxa/gumstix-verdex.c
-@@ -0,0 +1,794 @@
-+/*
-+ *  linux/arch/arm/mach-pxa/gumstix-verdex.c
-+ *
-+ *  Support for the Gumstix verdex motherboard.
-+ *
-+ *  Original Author:  Craig Hughes
-+ *  Created:          Feb 14, 2008
-+ *  Copyright:        Craig Hughes
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ *
-+ *  Implemented based on lubbock.c by Nicolas Pitre and code from Craig
-+ *  Hughes
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/interrupt.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/i2c/tsc2007.h>
-+#include <linux/i2c/pxa-i2c.h>
-+#include <linux/gpio.h>
-+#include <linux/gpio-pxa.h>
-+
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+#include <asm/sizes.h>
-+#include <asm/io.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+#include <asm/mach/flash.h>
-+
-+#include <mach/mmc.h>
-+#include <mach/udc.h>
-+#include <mach/pxafb.h>
-+#include <mach/ohci.h>
-+#include <mach/pxa27x.h>
-+#include <mach/pxa27x-udc.h>
-+#include <mach/gpio.h>
-+
-+#include <mach/gumstix.h>
-+
-+#include "generic.h"
-+
-+#include <linux/delay.h>
-+
-+static struct resource flash_resource = {
-+	.start	= 0x00000000,
-+	.end	= SZ_64M - 1,
-+	.flags	= IORESOURCE_MEM,
-+};
-+
-+static struct mtd_partition gumstix_partitions[] = {
-+	{
-+		.name =		"u-boot",
-+		.size =		0x00040000,
-+		.offset =	0,
-+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-+	} , {
-+		.name =		"rootfs",
-+		.size =		0x01ec0000,
-+		.offset =	0x00040000
-+	} , {
-+		.name =		"kernel",
-+		.size =		0x00100000,
-+		.offset =	0x01f00000
-+	}
-+};
-+
-+static struct flash_platform_data gumstix_flash_data = {
-+	.map_name	= "cfi_probe",
-+	.parts		= gumstix_partitions,
-+	.nr_parts	= ARRAY_SIZE(gumstix_partitions),
-+	.width		= 2,
-+};
-+
-+static struct platform_device gumstix_flash_device = {
-+	.name		= "pxa2xx-flash",
-+	.id		= 0,
-+	.dev = {
-+		.platform_data = &gumstix_flash_data,
-+	},
-+	.resource = &flash_resource,
-+	.num_resources = 1,
-+};
-+
-+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) \
-+    || defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
-+
-+#include <linux/smsc911x.h>
-+
-+static struct resource verdex_smsc911x_resources[] = {
-+	[0] = {
-+		.name	= "smsc911x-memory",
-+		.start  = PXA_CS1_PHYS,
-+		.end    = PXA_CS1_PHYS + 0x000fffff,
-+		.flags  = IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start  = PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH0),
-+		.end    = PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH0),
-+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-+	},
-+};
-+
-+static struct smsc911x_platform_config verdex_smsc911x_config = {
-+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-+	.flags		= SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS,
-+	.phy_interface	= PHY_INTERFACE_MODE_MII,
-+};
-+
-+static struct platform_device verdex_smsc911x_device = {
-+	.name		= "smsc911x",
-+	.id		= -1,
-+	.num_resources	= ARRAY_SIZE(verdex_smsc911x_resources),
-+	.resource	= verdex_smsc911x_resources,
-+	.dev		= {
-+		.platform_data = &verdex_smsc911x_config,
-+	},
-+};
-+#endif
-+
-+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-+static void __init verdex_init_smsc911x(void)
-+{
-+
-+        printk(KERN_INFO "Initializing Gumstix verdex smsc911x\n");
-+
-+	if (gpio_request(GPIO_GUMSTIX_ETH0_RST, "SMSC911x_ETH0_RST") != 0) {
-+		printk(KERN_ERR "could not obtain gpio for SMSC911x_ETH0_RST\n");
-+		goto err_request_gpio_eth0_rst;
-+	}
-+
-+	if (gpio_request(GPIO_GUMSTIX_ETH0, "SMSC911x_ETH0_IRQ") != 0) {
-+		printk(KERN_ERR "could not obtain gpio for SMSC911x_ETH0_IRQ\n");
-+		goto err_request_gpio_eth0_irq;
-+	}
-+
-+	if (gpio_direction_output(GPIO_GUMSTIX_ETH0_RST, 0) != 0) {
-+		printk(KERN_ERR "could not set SMSC911x_ETH0_RST pin to output\n");
-+		goto err_dir;
-+	}
-+
-+	gpio_set_value(GPIO_GUMSTIX_ETH0_RST, 0);
-+
-+	msleep(500); // Hold RESET for at least 200ms
-+
-+	gpio_set_value(GPIO_GUMSTIX_ETH0_RST, 1);
-+
-+	msleep(50);
-+
-+	if (gpio_direction_input(GPIO_GUMSTIX_ETH0) != 0) {
-+		printk(KERN_ERR "could not set SMSC911x_ETH0_IRQ pin to input\n");
-+		goto err_dir;
-+	}
-+
-+	gpio_export(GPIO_GUMSTIX_ETH0, 0);
-+	platform_device_register(&verdex_smsc911x_device);
-+	return;
-+
-+err_dir:
-+	gpio_free(GPIO_GUMSTIX_ETH0_RST);
-+
-+err_request_gpio_eth0_irq:
-+	gpio_free(GPIO_GUMSTIX_ETH0);
-+
-+err_request_gpio_eth0_rst:
-+	return;
-+}
-+
-+#else
-+static void __init verdex_init_smsc911x(void) { return; }
-+#endif
-+
-+static unsigned long verdex_pin_config[] = {
-+	/* MMC */
-+	GPIO32_MMC_CLK,
-+	GPIO112_MMC_CMD,
-+	GPIO92_MMC_DAT_0,
-+	GPIO109_MMC_DAT_1,
-+	GPIO110_MMC_DAT_2,
-+	GPIO111_MMC_DAT_3,
-+
-+	/* BTUART */
-+	GPIO42_BTUART_RXD,
-+	GPIO43_BTUART_TXD,
-+	GPIO44_BTUART_CTS,
-+	GPIO45_BTUART_RTS,
-+
-+	/* STUART */
-+	GPIO46_STUART_RXD,
-+	GPIO47_STUART_TXD,
-+
-+	/* FFUART */
-+	GPIO34_FFUART_RXD,
-+	GPIO39_FFUART_TXD,
-+
-+	/* SSP 2 */
-+	GPIO19_SSP2_SCLK,
-+	GPIO14_SSP2_SFRM,
-+	GPIO13_SSP2_TXD,
-+	GPIO11_SSP2_RXD,
-+
-+	/* SDRAM and local bus */
-+	GPIO49_nPWE,
-+	GPIO15_nCS_1,
-+
-+	/* I2C */
-+	GPIO117_I2C_SCL,
-+	GPIO118_I2C_SDA,
-+
-+	/* PWM 0 */
-+	GPIO16_PWM0_OUT,
-+
-+	/* BRIGHTNESS */
-+	GPIO17_PWM1_OUT,
-+
-+	/* LCD */
-+	GPIO58_LCD_LDD_0,
-+	GPIO59_LCD_LDD_1,
-+	GPIO60_LCD_LDD_2,
-+	GPIO61_LCD_LDD_3,
-+	GPIO62_LCD_LDD_4,
-+	GPIO63_LCD_LDD_5,
-+	GPIO64_LCD_LDD_6,
-+	GPIO65_LCD_LDD_7,
-+	GPIO66_LCD_LDD_8,
-+	GPIO67_LCD_LDD_9,
-+	GPIO68_LCD_LDD_10,
-+	GPIO69_LCD_LDD_11,
-+	GPIO70_LCD_LDD_12,
-+	GPIO71_LCD_LDD_13,
-+	GPIO72_LCD_LDD_14,
-+	GPIO73_LCD_LDD_15,
-+	GPIO74_LCD_FCLK,
-+	GPIO75_LCD_LCLK,
-+	GPIO76_LCD_PCLK,
-+#ifdef CONFIG_FB_PXA_SHARP_LQ043_PSP
-+	/* DISP must be always high while screen is on */
-+	/* Done below in verdex_init */
-+#else
-+	GPIO77_LCD_BIAS,
-+#endif
-+};
-+
-+#if defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
-+
-+static unsigned long gpio_ntschg_0[] = {
-+	GPIO104_GPIO,			// pxa_gpio_mode(GPIO_GUMSTIX_nCD_0_MD);
-+};
-+
-+static unsigned long gpio_ntschg_1[] = {
-+	GPIO18_GPIO,			// pxa_gpio_mode(GPIO_GUMSTIX_nSTSCHG_1_MD);
-+	GPIO36_GPIO,			// pxa_gpio_mode(GPIO_GUMSTIX_nCD_1_MD);
-+	GPIO27_GPIO,			// pxa_gpio_mode(GPIO_GUMSTIX_PRDY_nBSY_1_MD);
-+};
-+
-+static unsigned long gpio_prdy_nbsy_old[] = {
-+	GPIO111_GPIO,			// pxa_gpio_mode(GPIO_GUMSTIX_nSTSCHG_0_MD);
-+	GPIO109_GPIO,			// pxa_gpio_mode(GPIO_GUMSTIX_PRDY_nBSY_0_OLD_MD);
-+};
-+
-+static unsigned long gpio_prdy_nbsy[] = {
-+	GPIO96_GPIO,			// pxa_gpio_mode(GPIO_GUMSTIX_PRDY_nBSY_0_MD);
-+};
-+
-+static unsigned long gpio_nhw_init[] = {
-+	GPIO48_nPOE,			// pxa_gpio_mode(GPIO_GUMSTIX_nPOE_MD);
-+	GPIO102_nPCE_1,			// pxa_gpio_mode(GPIO_GUMSTIX_nPCE_1_MD);
-+	GPIO105_nPCE_2,			// pxa_gpio_mode(GPIO_GUMSTIX_nPCE_2_MD);
-+	GPIO104_GPIO,			// pxa_gpio_mode(GPIO_GUMSTIX_nCD_0_MD);
-+
-+	GPIO49_nPWE,			// pxa_gpio_mode(GPIO_GUMSTIX_nPWE_MD);
-+	GPIO50_nPIOR,			// pxa_gpio_mode(GPIO_GUMSTIX_nPIOR_MD);
-+	GPIO51_nPIOW,			// pxa_gpio_mode(GPIO_GUMSTIX_nPIOW_MD);
-+	GPIO79_PSKTSEL,			// pxa_gpio_mode(GPIO_GUMSTIX_pSKTSEL_MD);
-+	GPIO55_nPREG,			// pxa_gpio_mode(GPIO_GUMSTIX_nPREG_MD);
-+	GPIO56_nPWAIT,			// pxa_gpio_mode(GPIO_GUMSTIX_nPWAIT_MD);
-+	GPIO57_nIOIS16,			// pxa_gpio_mode(GPIO_GUMSTIX_nIOIS16_MD);
-+};
-+
-+static	int net_cf_vx_mode = 0;
-+static	int pcmcia_cf_nr = 2;
-+
-+inline void __init gumstix_pcmcia_cpld_clk(void)
-+{
-+	gpio_set_value(GPIO_GUMSTIX_nPOE, 0);
-+	gpio_set_value(GPIO_GUMSTIX_nPOE, 1);
-+}
-+
-+inline unsigned char __init gumstix_pcmcia_cpld_read_bits(int bits)
-+{
-+	unsigned char result = 0;
-+	unsigned int shift = 0;
-+	while(bits--)
-+	{
-+		result |= !!(gpio_get_value(GPIO_GUMSTIX_nCD_0) & GPIO_bit(GPIO_GUMSTIX_nCD_0)) << shift;
-+		shift ++;
-+		gumstix_pcmcia_cpld_clk();
-+	}
-+	printk("CPLD responded with: %02x\n",result);
-+	return result;
-+}
-+
-+/* We use the CPLD on the CF-CF card to read a value from a shift register.  If we can read that
-+ * magic sequence, then we have 2 CF cards; otherwise we assume just one
-+ * The CPLD will send the value of the shift register on GPIO11 (the CD line for slot 0)
-+ * when RESET is held in reset.  We use GPIO48 (nPOE) as a clock signal,
-+ * GPIO52/53 (card enable for both cards) to control read/write to the shift register
-+ */
-+static void __init gumstix_count_cards(void)
-+{
-+	if ((gpio_request(GPIO_GUMSTIX_nPOE, "GPIO_GUMSTIX_nPOE") == 0) &&
-+	    (gpio_direction_output(GPIO_GUMSTIX_nPOE, 1) == 0))
-+		gpio_export(GPIO_GUMSTIX_nPOE, 0);
-+	else
-+		printk(KERN_ERR "could not obtain gpio for GPIO_GUMSTIX_nPOE\n");
-+
-+	if ((gpio_request(GPIO_GUMSTIX_nPCE_1, "GPIO_GUMSTIX_nPCE_1") == 0) &&
-+	    (gpio_direction_output(GPIO_GUMSTIX_nPCE_1, 1) == 0))
-+		gpio_export(GPIO_GUMSTIX_nPCE_1, 0);
-+	else
-+		printk(KERN_ERR "could not obtain gpio for GPIO_GUMSTIX_nPCE_1\n");
-+
-+	if ((gpio_request(GPIO_GUMSTIX_nPCE_2, "GPIO_GUMSTIX_nPCE_2") == 0) &&
-+	    (gpio_direction_output(GPIO_GUMSTIX_nPCE_2, 1) == 0))
-+		gpio_export(GPIO_GUMSTIX_nPCE_2, 0);
-+	else
-+		printk(KERN_ERR "could not obtain gpio for GPIO_GUMSTIX_nPCE_2\n");
-+
-+	if ((gpio_request(GPIO_GUMSTIX_nCD_0, "GPIO_GUMSTIX_nCD_0") == 0) &&
-+	    (gpio_direction_input(GPIO_GUMSTIX_nCD_0) == 0))
-+		gpio_export(GPIO_GUMSTIX_nCD_0, 0);
-+	else
-+		printk(KERN_ERR "could not obtain gpio for GPIO_GUMSTIX_nCD_0\n");
-+
-+	if (net_cf_vx_mode) {
-+		if ((gpio_request(GPIO_GUMSTIX_CF_OLD_RESET, "GPIO_GUMSTIX_CF_OLD_RESET") == 0) &&
-+	    	    (gpio_direction_output(GPIO_GUMSTIX_CF_OLD_RESET, 1) == 0)) {
-+			gpio_export(GPIO_GUMSTIX_CF_OLD_RESET, 0);
-+		} else {
-+			printk(KERN_ERR "could not obtain gpio for GPIO_GUMSTIX_CF_OLD_RESET\n");
-+		}
-+	} else {
-+		if ((gpio_request(GPIO_GUMSTIX_CF_RESET, "GPIO_GUMSTIX_CF_RESET") == 0) &&
-+	    	    (gpio_direction_output(GPIO_GUMSTIX_CF_RESET, 1) == 0)) {
-+			gpio_export(GPIO_GUMSTIX_CF_RESET, 0);
-+		} else {
-+			printk(KERN_ERR "could not obtain gpio for GPIO_GUMSTIX_CF_RESET\n");
-+		}
-+	}
-+
-+	// Setup the shift register
-+	gpio_set_value(GPIO_GUMSTIX_nPCE_1, 1);
-+	gpio_set_value(GPIO_GUMSTIX_nPCE_2, 0);
-+
-+	// Tick the clock to program the shift register
-+	gumstix_pcmcia_cpld_clk();
-+
-+	// Now set shift register into read mode
-+	gpio_set_value(GPIO_GUMSTIX_nPCE_1, 0);
-+	gpio_set_value(GPIO_GUMSTIX_nPCE_2, 1);
-+
-+	// We can read the bits now -- 0xC2 means "Dual compact flash"
-+	if(gumstix_pcmcia_cpld_read_bits(8) != 0xC2)
-+	{
-+		// We do not have 2 CF slots
-+		pcmcia_cf_nr = 1;
-+	}
-+
-+	udelay(50);
-+
-+	if (net_cf_vx_mode) {
-+		gpio_set_value(GPIO_GUMSTIX_CF_OLD_RESET, 0);
-+		gpio_free(GPIO_GUMSTIX_CF_OLD_RESET);
-+	} else {
-+		gpio_set_value(GPIO_GUMSTIX_CF_RESET, 0);
-+		gpio_free(GPIO_GUMSTIX_CF_RESET);
-+	}
-+
-+	printk(KERN_INFO "found %d CF slots\n", pcmcia_cf_nr);
-+
-+	gpio_free(GPIO_GUMSTIX_nPCE_2);
-+	gpio_free(GPIO_GUMSTIX_nPCE_1);
-+	gpio_free(GPIO_GUMSTIX_nPOE);
-+	return;
-+}
-+
-+#define	SMC_IO_EXTENT	16
-+#define	BANK_SELECT	14
-+
-+static void __init verdex_pcmcia_pin_config(void)
-+{
-+	struct resource *res;
-+	void *network_controller_memory;
-+	struct platform_device *pdev = &verdex_smsc911x_device;
-+
-+        printk(KERN_INFO "Initializing Gumstix verdex pcmcia\n");
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (res == NULL) {
-+		printk(KERN_ERR "no memory resource defined\n");
-+		goto err_done;
-+	}
-+
-+	res = request_mem_region(res->start, SMC_IO_EXTENT, "smc91x probe");
-+	if (res == NULL) {
-+		printk(KERN_ERR "failed to request memory resource\n");
-+		goto err_done;
-+	}
-+
-+	// We check for the possibility of SMSC91c111 (reg base offset 0x300 from CS1 base)
-+	network_controller_memory = ioremap(res->start + 0x300, SMC_IO_EXTENT);
-+	if (network_controller_memory == NULL) {
-+		printk(KERN_ERR "failed to ioremap() registers\n");
-+		goto err_free_mem;
-+	}
-+
-+	// Look for the special 91c111 value in the bank select register
-+	if((0xff00 & readw(network_controller_memory+BANK_SELECT)) == 0x3300) {
-+		printk(KERN_INFO "Detected netCF-vx board: pcmcia using older GPIO configuration\n");
-+		net_cf_vx_mode = 1;
-+	} else {
-+		printk(KERN_INFO "Not netCF-vx board: pcmcia using newer GPIO configuration\n");
-+		net_cf_vx_mode = 0;
-+	}
-+
-+	iounmap(network_controller_memory);
-+err_free_mem:
-+	release_mem_region(res->start, SMC_IO_EXTENT);
-+err_done:
-+
-+	gumstix_count_cards();	// this can update pcmcia_cf_nr
-+
-+	// If pcmcia_cf_nr is 1 then we do not have 2 CF slots
-+	// Note: logic sequence was altered from previous kernel revs
-+	// so that this works as intended now.
-+	if (pcmcia_cf_nr != 0)
-+	{
-+		pxa2xx_mfp_config(ARRAY_AND_SIZE(gpio_ntschg_0));
-+
-+		if(net_cf_vx_mode)
-+			pxa2xx_mfp_config(gpio_prdy_nbsy_old, 1);
-+		else
-+			pxa2xx_mfp_config(gpio_prdy_nbsy, 1);
-+
-+	} else {
-+		// Note: this reconfigures pin GPIO18 to be GPIO-IN so make
-+		// sure that this only gets done for the old dual slot board
-+		// since that pin is an active AF1 out-mode signal (RDY) on
-+		// newer boards and changing the pin mode on the newer boards
-+		// would result in memory corruption for the NIC (and hang during
-+		// PHY test).
-+		pxa2xx_mfp_config(ARRAY_AND_SIZE(gpio_ntschg_1));
-+	}
-+
-+	pxa2xx_mfp_config(ARRAY_AND_SIZE(gpio_nhw_init));
-+	return;
-+}
-+
-+int __init gumstix_get_cf_cards(void)
-+{
-+	return pcmcia_cf_nr;
-+}
-+EXPORT_SYMBOL(gumstix_get_cf_cards);
-+
-+#ifdef CONFIG_MACH_GUMSTIX_VERDEX
-+int __init gumstix_check_if_netCF_vx(void)
-+{
-+	return net_cf_vx_mode;
-+}
-+EXPORT_SYMBOL(gumstix_check_if_netCF_vx);
-+#endif
-+
-+#endif
-+
-+#if defined(CONFIG_FB_PXA_SHARP_LQ043_PSP) || defined(CONFIG_FB_PXA_SAMSUNG_LTE430WQ_F0C)
-+static void gumstix_lcd_backlight(int on_or_off)
-+{
-+	int err;
-+	err = gpio_request(17, "LCD BACKLIGHT");
-+	if (err) {
-+		//pr_warning("Gumstix Verdex: Failed to request LCD Backlight gpio\n");
-+		return;
-+	}
-+
-+	if(on_or_off) {
-+		gpio_direction_input(17);
-+	} else {
-+		gpio_set_value(17, 0);
-+		gpio_direction_output(17, 0);
-+		gpio_set_value(17, 0);
-+	}
-+
-+	return;
-+}
-+#endif
-+
-+#ifdef CONFIG_FB_PXA_ALPS_CDOLLAR
-+static struct pxafb_mode_info gumstix_fb_mode = {
-+	.pixclock	= 300000,
-+	.xres		= 240,
-+	.yres		= 320,
-+	.bpp		= 16,
-+	.hsync_len	= 2,
-+	.left_margin	= 1,
-+	.right_margin	= 1,
-+	.vsync_len	= 3,
-+	.upper_margin	= 0,
-+	.lower_margin	= 0,
-+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+};
-+
-+static struct pxafb_mach_info gumstix_fb_info = {
-+	.modes		= &gumstix_fb_mode,
-+	.num_modes	= 1,
-+	.lccr0		= LCCR0_Pas | LCCR0_Sngl | LCCR0_Color,
-+	.lccr3		= LCCR3_PixFlEdg,
-+};
-+#elif defined(CONFIG_FB_PXA_SHARP_LQ043_PSP)
-+static struct pxafb_mode_info gumstix_fb_mode = {
-+	.pixclock	= 110000,
-+	.xres		= 480,
-+	.yres		= 272,
-+	.bpp		= 16,
-+	.hsync_len	= 41,
-+	.left_margin	= 2,
-+	.right_margin	= 2,
-+	.vsync_len	= 10,
-+	.upper_margin	= 2,
-+	.lower_margin	= 2,
-+	.sync		= 0, // Hsync and Vsync both active low
-+};
-+
-+static struct pxafb_mach_info gumstix_fb_info = {
-+	.modes			= &gumstix_fb_mode,
-+	.num_modes		= 1,
-+	.lccr0			= LCCR0_Act | LCCR0_Sngl | LCCR0_Color,
-+	.lccr3			= LCCR3_OutEnH | LCCR3_PixFlEdg | (0 << 30),
-+	.pxafb_backlight_power	= &gumstix_lcd_backlight,
-+};
-+#elif defined(CONFIG_FB_PXA_SAMSUNG_LTE430WQ_F0C)
-+static struct pxafb_mode_info gumstix_fb_mode = {
-+	.pixclock	= 108696, // 9.2MHz typical DOTCLK from datasheet
-+	.xres		= 480,
-+	.hsync_len	= 41, // HLW from datasheet: 41 typ
-+	.left_margin	= 4, // HBP - HLW from datasheet: 45 - 41 = 4
-+	.right_margin	= 8, // HFP from datasheet: 8 typ
-+	.yres		= 272,
-+	.vsync_len	= 10, // VLW from datasheet: 10 typ
-+	.upper_margin	= 2, // VBP - VLW from datasheet: 12 - 10 = 2
-+	.lower_margin	= 4, // VFP from datasheet: 4 typ
-+	.bpp		= 16,
-+	.sync		= 0, // Hsync and Vsync both active low
-+};
-+
-+static struct pxafb_mach_info gumstix_fb_info = {
-+	.modes			= &gumstix_fb_mode,
-+	.num_modes		= 1,
-+	.lccr0			= LCCR0_Act | LCCR0_Sngl | LCCR0_Color,
-+	.lccr3			= LCCR3_OutEnH | LCCR3_PixFlEdg | (0 << 30),
-+	.pxafb_backlight_power	= &gumstix_lcd_backlight,
-+};
-+#endif
-+
-+static struct platform_device verdex_audio_device = {
-+    .name       = "pxa2xx-ac97",
-+    .id         = -1,
-+};
-+
-+static struct platform_device *devices[] __initdata = {
-+	&gumstix_flash_device,
-+	&verdex_audio_device,
-+};
-+
-+/* PXA27x OHCI controller setup */
-+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-+static int ohci_verdex_init(struct device *dev)
-+{
-+	// Turn on port 2 in host mode
-+	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
-+
-+	/* See drivers/usb/host/ohci-pxa27x.c for further details but
-+           ENABLE_PORT_ALL flag is equivalent to using this old sequence:
-+	UHCHR = (UHCHR) &
-+		~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
-+	*/
-+	return 0;
-+}
-+
-+static struct pxaohci_platform_data verdex_ohci_platform_data = {
-+	.port_mode	= PMM_PERPORT_MODE,
-+	.flags		= ENABLE_PORT_ALL,
-+	.init		= ohci_verdex_init,
-+};
-+
-+static void __init verdex_ohci_init(void)
-+{
-+	pxa_set_ohci_info(&verdex_ohci_platform_data);
-+}
-+#else
-+static void __init verdex_ohci_init(void) {
-+    printk(KERN_INFO "Gumstix verdex host usb ohci is disabled\n");
-+}
-+#endif
-+
-+
-+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-+static struct pxamci_platform_data verdex_mci_platform_data;
-+
-+static int verdex_mci_init(struct device *dev, irq_handler_t detect_int,
-+                void *data)
-+{
-+	/* GPIO setup for MMC on the 120-pin connector is done in verdex_init.
-+	 * There is no card detect on a uSD connector so no interrupt to
-+	 * register. There is no WP detect GPIO line either.
-+	 */
-+
-+	return 0;
-+}
-+
-+static struct pxamci_platform_data verdex_mci_platform_data = {
-+	.ocr_mask   = MMC_VDD_32_33|MMC_VDD_33_34,
-+	.init       = verdex_mci_init,
-+	.gpio_card_detect 	= -1,
-+	.gpio_card_ro		= -1,
-+	.gpio_power		= -1,
-+};
-+
-+static void __init verdex_mmc_init(void)
-+{
-+	pxa_set_mci_info(&verdex_mci_platform_data);
-+}
-+#else
-+static void __init verdex_mmc_init(void)
-+{
-+	printk(KERN_INFO "Gumstix verdex mmc disabled\n");
-+}
-+#endif
-+
-+#if defined(CONFIG_USB_GADGET_PXA2XX) || defined(CONFIG_USB_GADGET_PXA2XX_MODULE)
-+static struct pxa2xx_udc_mach_info verdex_udc_info __initdata = {
-+	.gpio_vbus	= GPIO35,
-+	.gpio_pullup	= GPIO41,
-+};
-+
-+static void __init verdex_udc_init(void)
-+{
-+	pxa_set_udc_info(&verdex_udc_info);
-+}
-+#else
-+static void __init verdex_udc_init(void)
-+{
-+	printk(KERN_INFO "Gumstix verdex udc is disabled\n");
-+}
-+#endif
-+
-+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-+
-+#if defined(CONFIG_TOUCHSCREEN_TSC2003) || defined(CONFIG_TOUCHSCREEN_TSC2003_MODULE)
-+
-+#define VERDEX_GPIO_PENDOWN	16
-+
-+static int tsc2003_init_platform_hw(void)
-+{
-+	return 0;
-+}
-+
-+static void tsc2003_exit_platform_hw(void)
-+{
-+	return;
-+}
-+
-+static void tsc2003_clear_penirq(void)
-+{
-+	return;
-+}
-+
-+static int tsc2003_get_pendown_state(void)
-+{
-+	return !gpio_get_value(VERDEX_GPIO_PENDOWN);
-+}
-+
-+static struct tsc2007_platform_data tsc2003_config = {
-+	.model			= 2003,
-+	.x_plate_ohms		= 100,
-+	.get_pendown_state	= tsc2003_get_pendown_state,
-+	.clear_penirq		= tsc2003_clear_penirq,
-+	.init_platform_hw	= tsc2003_init_platform_hw,
-+	.exit_platform_hw	= tsc2003_exit_platform_hw,
-+};
-+#endif
-+
-+static struct i2c_board_info __initdata verdex_i2c_board_info[] = {
-+#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
-+	{
-+		I2C_BOARD_INFO("rtc-ds1307", 0x68),
-+	},
-+#endif
-+#if defined(CONFIG_TOUCHSCREEN_TSC2003) || defined(CONFIG_TOUCHSCREEN_TSC2003_MODULE)
-+	{
-+		I2C_BOARD_INFO("tsc2003", 0x48),
-+		.platform_data	= &tsc2003_config,
-+		.irq		= IRQ_GPIO(VERDEX_GPIO_PENDOWN),
-+	},
-+#endif
-+};
-+
-+static struct i2c_pxa_platform_data verdex_i2c_pwr_info = {
-+	.fast_mode = 1,
-+};
-+
-+static struct i2c_pxa_platform_data verdex_i2c_info = {
-+	.fast_mode = 1,
-+};
-+
-+static void __init verdex_i2c_init(void)
-+{
-+	printk(KERN_INFO "Initializing Gumstix verdex i2c\n");
-+
-+#if defined(CONFIG_TOUCHSCREEN_TSC2003) || defined(CONFIG_TOUCHSCREEN_TSC2003_MODULE)
-+	if ((gpio_request(VERDEX_GPIO_PENDOWN, "TSC2003_PENDOWN") == 0) &&
-+	    (gpio_direction_input(VERDEX_GPIO_PENDOWN) == 0)) {
-+		gpio_export(VERDEX_GPIO_PENDOWN, 0);
-+	} else {
-+		printk(KERN_ERR "could not obtain gpio for TSC2003_PENDOWN\n");
-+		return;
-+	}
-+#endif
-+
-+	i2c_register_board_info(0, verdex_i2c_board_info,
-+				ARRAY_SIZE(verdex_i2c_board_info));
-+	pxa_set_i2c_info(&verdex_i2c_info);
-+	pxa27x_set_i2c_power_info(&verdex_i2c_pwr_info);
-+}
-+#else
-+static inline void verdex_i2c_init(void) {}
-+#endif
-+
-+#if defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
-+static void __init verdex_pcmcia_init(void)
-+{
-+	verdex_pcmcia_pin_config();
-+}
-+#else
-+static void __init verdex_pcmcia_init(void) {
-+	printk(KERN_INFO "Gumstix verdex pcmcia is disabled\n");
-+}
-+#endif
-+
-+
-+static void __init verdex_init(void)
-+{
-+	pxa2xx_mfp_config(ARRAY_AND_SIZE(verdex_pin_config));
-+
-+#ifdef CONFIG_FB_PXA_SHARP_LQ043_PSP
-+	/* DISP must be always high while screen is on */
-+	gpio_direction_output(GPIO77, 0);
-+	gpio_set_value(GPIO77, 1);
-+#endif
-+	verdex_udc_init();
-+	verdex_mmc_init();
-+	verdex_ohci_init();
-+	verdex_i2c_init();
-+	verdex_init_smsc911x();
-+	verdex_pcmcia_init();
-+
-+#if defined(CONFIG_FB_PXA_ALPS_CDOLLAR) || defined(CONFIG_FB_PXA_SHARP_LQ043_PSP) || defined(CONFIG_FB_PXA_SAMSUNG_LTE430WQ_F0C)
-+	printk(KERN_INFO "Initializing Gumstix verdex FB info\n");
-+	set_pxa_fb_info(&gumstix_fb_info);
-+#endif
-+	printk(KERN_INFO "Initializing Gumstix platform_add_devices\n");
-+	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
-+}
-+
-+MACHINE_START(GUMSTIX, "Gumstix verdex")
-+	.atag_offset    = 0x100, /* match u-boot bi_boot_params */
-+	.map_io         = pxa27x_map_io,
-+	.init_irq       = pxa27x_init_irq,
-+	.handle_irq	= pxa27x_handle_irq,
-+	.timer          = &pxa_timer,
-+	.init_machine   = verdex_init,
-+	.restart	= pxa_restart,
-+MACHINE_END
---- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
-+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
-@@ -109,6 +109,7 @@
- #define GPIO54_nPCE_2		MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
- #define GPIO78_nPCE_2		MFP_CFG_OUT(GPIO78, AF1, DRIVE_HIGH)
- #define GPIO87_nPCE_2		MFP_CFG_IN(GPIO87, AF1)
-+#define GPIO105_nPCE_2		MFP_CFG_OUT(GPIO105, AF1, DRIVE_HIGH)
- #define GPIO55_nPREG		MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
- #define GPIO50_nPIOR		MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
- #define GPIO51_nPIOW		MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
diff --git a/target/linux/pxa/patches-3.3/002-verdex_lcd_support.patch b/target/linux/pxa/patches-3.3/002-verdex_lcd_support.patch
deleted file mode 100644
index 90f78547a2..0000000000
--- a/target/linux/pxa/patches-3.3/002-verdex_lcd_support.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From eb92a178eceae4e5d18bbb442b8e44cb88457d60 Mon Sep 17 00:00:00 2001
-From: Joseph Kortje <jpktech@rogers.com>
-Date: Wed, 28 Oct 2009 21:25:57 -0400
-Subject: [PATCH] [ARM] Gumstix Verdex LCD config options
-
-add options to Kconfig for Verdex LCD support
-
-Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
----
- drivers/video/Kconfig |   31 +++++++++++++++++++++++++++++++
- 1 files changed, 31 insertions(+), 0 deletions(-)
-
---- a/drivers/video/Kconfig
-+++ b/drivers/video/Kconfig
-@@ -1892,6 +1892,37 @@ config FB_PXA
- 	  say M here and read <file:Documentation/kbuild/modules.txt>.
- 
- 	  If unsure, say N.
-+choice
-+	depends on FB_PXA
-+	prompt "LCD Panel"
-+	default FB_PXA_SAMSUNG_LTE430WQ_F0C
-+
-+config FB_PXA_ALPS_CDOLLAR
-+	boolean "Chris Dollar's ALPS screen"
-+	---help---
-+	  Enable definitions (over-ridable on the kernel command line if
-+	  "PXA LCD command line parameters" is also selected) for an ALPS
-+	  screen which Chris Dollar uses
-+
-+config FB_PXA_SHARP_LQ043_PSP
-+	boolean "SHARP LQ043... series"
-+	---help---
-+	  Enable definitions (over-ridable on the kernel command line if
-+	  "PXA LCD command line parameters" is also selected) for a SHARP
-+	  LQ043... screen, such as the one used by the PSP.  These screens are
-+	  the ones normally sold by gumstix with its boards.
-+
-+config FB_PXA_SAMSUNG_LTE430WQ_F0C
-+	boolean "Samsung LTE430WQ-F0C (standard gumstix LCD)"
-+	---help---
-+	  Enable definitions for a Samsung LTE430WQ-F0C LCD panel, such as the ones resold
-+	  by gumstix for use with their "LCD-Ready" boards.
-+
-+config FB_PXA_NONEOFTHEABOVE
-+	boolean "None of the above"
-+
-+endchoice
-+
- 
- config FB_PXA_OVERLAY
- 	bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
diff --git a/target/linux/pxa/patches-3.3/003-gumstix_h_verdex_pro_support.patch b/target/linux/pxa/patches-3.3/003-gumstix_h_verdex_pro_support.patch
deleted file mode 100644
index 6dd291d483..0000000000
--- a/target/linux/pxa/patches-3.3/003-gumstix_h_verdex_pro_support.patch
+++ /dev/null
@@ -1,214 +0,0 @@
-From adb6abbe4e3bc17c20cdc70e4a4357f1633d4970 Mon Sep 17 00:00:00 2001
-From: Joseph Kortje <jpktech@rogers.com>
-Date: Wed, 28 Oct 2009 21:49:11 -0400
-Subject: [PATCH] [ARM] gumstix.h: Verdex Pro support
-
-Added a bunch of ifdefs to support both original gumstix boards
-as well as the Verdex Pro in gumstix.h
-
-Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
----
- arch/arm/mach-pxa/include/mach/gumstix.h |  160 ++++++++++++++++++++++++------
- 1 files changed, 130 insertions(+), 30 deletions(-)
-
---- a/arch/arm/mach-pxa/include/mach/gumstix.h
-+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
-@@ -6,6 +6,9 @@
-  * published by the Free Software Foundation.
-  */
- 
-+#if !defined(__ASM_ARCH_MFP_PXA27X_H) && !defined(__ASM_ARCH_MFP_PXA25X_H)
-+	#error You need to include either mfp-pxa27x.h or mfp-pxa25x.h
-+#endif
- 
- /* BTRESET - Reset line to Bluetooth module, active low signal. */
- #define GPIO_GUMSTIX_BTRESET          7
-@@ -20,9 +23,18 @@ this moves to GPIO17 and GPIO37. */
- /* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn
- has detected a cable insertion; driven low otherwise. */
- 
-+#ifndef CONFIG_MACH_GUMSTIX_VERDEX
-+
- #define GPIO_GUMSTIX_USB_GPIOn		35
- #define GPIO_GUMSTIX_USB_GPIOx		41
- 
-+#else
-+
-+#define GPIO_GUMSTIX_USB_GPIOn         100
-+#define GPIO_GUMSTIX_USB_GPIOx         27
-+
-+#endif
-+
- /* usb state change */
- #define GUMSTIX_USB_INTR_IRQ		PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_USB_GPIOn)
- 
-@@ -42,48 +54,136 @@ has detected a cable insertion; driven l
-  * ETH_RST provides a hardware reset line to the ethernet chip
-  * ETH is the IRQ line in from the ethernet chip to the PXA
-  */
-+#ifndef CONFIG_MACH_GUMSTIX_VERDEX
- #define GPIO_GUMSTIX_ETH0_RST		80
--#define GPIO_GUMSTIX_ETH0_RST_MD	(GPIO_GUMSTIX_ETH0_RST | GPIO_OUT)
-+#define GPIO_GUMSTIX_ETH0		36
-+#else
-+#define GPIO_GUMSTIX_ETH0_RST		107
-+#define GPIO_GUMSTIX_ETH0		99
-+#endif
- #define GPIO_GUMSTIX_ETH1_RST		52
--#define GPIO_GUMSTIX_ETH1_RST_MD	(GPIO_GUMSTIX_ETH1_RST | GPIO_OUT)
-+#define GPIO_GUMSTIX_ETH1		27
- 
--#define GPIO_GUMSTIX_ETH0		36
-+#define GPIO_GUMSTIX_ETH0_RST_MD	(GPIO_GUMSTIX_ETH0_RST | GPIO_OUT)
-+#define GPIO_GUMSTIX_ETH1_RST_MD	(GPIO_GUMSTIX_ETH1_RST | GPIO_OUT)
- #define GPIO_GUMSTIX_ETH0_MD		(GPIO_GUMSTIX_ETH0 | GPIO_IN)
--#define GUMSTIX_ETH0_IRQ		PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH0)
--#define GPIO_GUMSTIX_ETH1		27
- #define GPIO_GUMSTIX_ETH1_MD		(GPIO_GUMSTIX_ETH1 | GPIO_IN)
--#define GUMSTIX_ETH1_IRQ		PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH1)
--
- 
--/* CF reset line */
--#define GPIO8_RESET			8
-+#define GUMSTIX_ETH0_IRQ		PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH0)
-+#define GUMSTIX_ETH1_IRQ		PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH1)
- 
--/* CF slot 0 */
--#define GPIO4_nBVD1			4
--#define GPIO4_nSTSCHG			GPIO4_nBVD1
--#define GPIO11_nCD			11
--#define GPIO26_PRDY_nBSY		26
--#define GUMSTIX_S0_nSTSCHG_IRQ		PXA_GPIO_TO_IRQ(GPIO4_nSTSCHG)
--#define GUMSTIX_S0_nCD_IRQ		PXA_GPIO_TO_IRQ(GPIO11_nCD)
--#define GUMSTIX_S0_PRDY_nBSY_IRQ	PXA_GPIO_TO_IRQ(GPIO26_PRDY_nBSY)
-+ /* CF reset line */
-+#define GPIO8_CF_RESET			8
-+#define GPIO97_CF_RESET			97
-+#define GPIO110_CF_RESET		110
-+
-+#ifndef CONFIG_MACH_GUMSTIX_VERDEX
-+#define GPIO_GUMSTIX_CF_RESET		GPIO8_CF_RESET
-+#else
-+#define GPIO_GUMSTIX_CF_RESET		GPIO97_CF_RESET
-+#endif
-+
-+#define GPIO_GUMSTIX_CF_OLD_RESET	GPIO110_CF_RESET
-+
-+/* CF signals shared by both sockets */
-+#define GPIO_GUMSTIX_nPOE	48
-+#define GPIO_GUMSTIX_nPWE	49
-+#define GPIO_GUMSTIX_nPIOR	50
-+#define GPIO_GUMSTIX_nPIOW	51
-+
-+#ifndef CONFIG_MACH_GUMSTIX_VERDEX
-+#define GPIO_GUMSTIX_nPCE_1	52
-+#define GPIO_GUMSTIX_nPCE_2	53
-+#define GPIO_GUMSTIX_pSKTSEL	54
-+#else
-+#define GPIO_GUMSTIX_nPCE_1	102
-+#define GPIO_GUMSTIX_nPCE_2	105
-+#define GPIO_GUMSTIX_pSKTSEL	79
-+#endif
-+
-+#define GPIO_GUMSTIX_nPREG	55
-+#define GPIO_GUMSTIX_nPWAIT	56
-+#define GPIO_GUMSTIX_nIOIS16	57
-+
-+/* Pin mode definitions correspond to mfp-pxa2[57]x.h */
-+#define GPIO_GUMSTIX_nPOE_MD	GPIO48_nPOE
-+#define GPIO_GUMSTIX_nPWE_MD	GPIO49_nPWE
-+#define GPIO_GUMSTIX_nPIOR_MD	GPIO50_nPIOR
-+#define GPIO_GUMSTIX_nPIOW_MD	GPIO51_nPIOW
-+
-+#ifndef CONFIG_MACH_GUMSTIX_VERDEX
-+#define GPIO_GUMSTIX_nPCE_1_MD	GPIO52_nPCE_1
-+#define GPIO_GUMSTIX_nPCE_2_MD	GPIO53_nPCE_2
-+#define GPIO_GUMSTIX_pSKTSEL_MD	GPIO54_pSKTSEL
-+#else
-+#define GPIO_GUMSTIX_nPCE_1_MD	GPIO102_nPCE_1
-+#define GPIO_GUMSTIX_nPCE_2_MD	GPIO105_nPCE_2
-+#define GPIO_GUMSTIX_pSKTSEL_MD	GPIO79_pSKTSEL
-+#endif
-+
-+#define GPIO_GUMSTIX_nPREG_MD	GPIO55_nPREG
-+#define GPIO_GUMSTIX_nPWAIT_MD	GPIO56_nPWAIT
-+#define GPIO_GUMSTIX_nIOIS16_MD	GPIO57_nIOIS16
-+
-+ /* CF slot 0 */
-+#define GPIO4_nBVD1_0			4
-+#define GPIO4_nSTSCHG_0			GPIO4_nBVD1_0
-+#define GPIO11_nCD_0			11
-+#define GPIO26_PRDY_nBSY_0		26
-+
-+#define GPIO111_nBVD1_0			111
-+#define GPIO111_nSTSCHG_0		GPIO111_nBVD1_0
-+#define GPIO104_nCD_0			104
-+#define GPIO96_PRDY_nBSY_0		96
-+#define GPIO109_PRDY_nBSY_0		109
-+
-+#ifndef CONFIG_MACH_GUMSTIX_VERDEX
-+#define GPIO_GUMSTIX_nBVD1_0		GPIO4_nBVD1_0
-+#define GPIO_GUMSTIX_nSTSCHG_0		GPIO4_nSTSCHG_0
-+#define GPIO_GUMSTIX_nCD_0		GPIO11_nCD_0
-+#define GPIO_GUMSTIX_PRDY_nBSY_0	GPIO26_PRDY_nBSY_0
-+#else
-+#define GPIO_GUMSTIX_nBVD1_0		GPIO111_nBVD1_0
-+#define GPIO_GUMSTIX_nSTSCHG_0		GPIO111_nSTSCHG_0
-+#define GPIO_GUMSTIX_nCD_0		GPIO104_nCD_0
-+#define GPIO_GUMSTIX_PRDY_nBSY_0	GPIO96_PRDY_nBSY_0
-+#endif
-+
-+#define GPIO_GUMSTIX_PRDY_nBSY_0_OLD	GPIO109_PRDY_nBSY_0
-+#define GUMSTIX_S0_PRDY_nBSY_OLD_IRQ	PXA_GPIO_TO_IRQ(GPIO109_PRDY_nBSY_0)
-+
-+#define GUMSTIX_S0_nSTSCHG_IRQ		PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_nSTSCHG_0)
-+#define GUMSTIX_S0_nCD_IRQ		PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_nCD_0)
-+#define GUMSTIX_S0_PRDY_nBSY_IRQ	PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_PRDY_nBSY_0)
- 
- /* CF slot 1 */
--#define GPIO18_nBVD1			18
--#define GPIO18_nSTSCHG			GPIO18_nBVD1
--#define GPIO36_nCD			36
--#define GPIO27_PRDY_nBSY		27
--#define GUMSTIX_S1_nSTSCHG_IRQ		PXA_GPIO_TO_IRQ(GPIO18_nSTSCHG)
--#define GUMSTIX_S1_nCD_IRQ		PXA_GPIO_TO_IRQ(GPIO36_nCD)
--#define GUMSTIX_S1_PRDY_nBSY_IRQ	PXA_GPIO_TO_IRQ(GPIO27_PRDY_nBSY)
--
--/* CF GPIO line modes */
--#define GPIO4_nSTSCHG_MD		(GPIO4_nSTSCHG | GPIO_IN)
--#define GPIO8_RESET_MD			(GPIO8_RESET | GPIO_OUT)
--#define GPIO11_nCD_MD			(GPIO11_nCD | GPIO_IN)
--#define GPIO18_nSTSCHG_MD		(GPIO18_nSTSCHG | GPIO_IN)
--#define GPIO26_PRDY_nBSY_MD		(GPIO26_PRDY_nBSY | GPIO_IN)
--#define GPIO27_PRDY_nBSY_MD		(GPIO27_PRDY_nBSY | GPIO_IN)
--#define GPIO36_nCD_MD			(GPIO36_nCD | GPIO_IN)
-+#define GPIO18_nBVD1_1			18
-+#define GPIO18_nSTSCHG_1		GPIO18_nBVD1_1
-+#define GPIO36_nCD_1			36
-+#define GPIO27_PRDY_nBSY_1		27
-+
-+#define GPIO_GUMSTIX_nBVD1_1		GPIO18_nBVD1_1
-+#define GPIO_GUMSTIX_nSTSCHG_1		GPIO18_nSTSCHG_1
-+#define GPIO_GUMSTIX_nCD_1		GPIO36_nCD_1
-+#define GPIO_GUMSTIX_PRDY_nBSY_1	GPIO27_PRDY_nBSY_1
-+
-+#define GUMSTIX_S1_nSTSCHG_IRQ		PXA_GPIO_TO_IRQ(GPIO18_nSTSCHG_1)
-+#define GUMSTIX_S1_nCD_IRQ		PXA_GPIO_TO_IRQ(GPIO36_nCD_1)
-+#define GUMSTIX_S1_PRDY_nBSY_IRQ	PXA_GPIO_TO_IRQ(GPIO27_PRDY_nBSY_1)
-+
-+/* CF GPIO line modes - correspond to mfp-pxa2[57]x.h */
-+#define GPIO_GUMSTIX_CF_RESET_MD	(GPIO_GUMSTIX_CF_RESET | GPIO_OUT)
-+#define GPIO_GUMSTIX_CF_OLD_RESET_MD	(GPIO_GUMSTIX_CF_OLD_RESET | GPIO_OUT)
-+
-+#define GPIO_GUMSTIX_nSTSCHG_0_MD	GPIO111_GPIO
-+#define GPIO_GUMSTIX_nCD_0_MD		GPIO104_GPIO
-+
-+#define GPIO_GUMSTIX_PRDY_nBSY_0_MD	GPIO96_GPIO
-+#define GPIO_GUMSTIX_PRDY_nBSY_0_OLD_MD	GPIO109_GPIO
-+
-+#define GPIO_GUMSTIX_nSTSCHG_1_MD	GPIO18_GPIO
-+#define GPIO_GUMSTIX_nCD_1_MD		GPIO36_GPIO
-+#define GPIO_GUMSTIX_PRDY_nBSY_1_MD	GPIO27_GPIO
- 
- /* for expansion boards that can't be programatically detected */
- extern int am200_init(void);
diff --git a/target/linux/pxa/patches-3.3/004-smsc911x_verdex_pro_support.patch b/target/linux/pxa/patches-3.3/004-smsc911x_verdex_pro_support.patch
deleted file mode 100644
index d2f1c1ae2c..0000000000
--- a/target/linux/pxa/patches-3.3/004-smsc911x_verdex_pro_support.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From 7645a459feb02f7aae4c3a5724b7800495d1b659 Mon Sep 17 00:00:00 2001
-From: Bobby Powers <bobbypowers@gmail.com>
-Date: Wed, 28 Oct 2009 22:41:31 -0400
-Subject: [PATCH] [ARM] smsc911x: Verdex Pro support
-
-Basically Joseph Kortje's patch, cleaned up to apply to Linus's
-tree.  Some of the smsc911x.c had been applied already
-
-Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
----
- drivers/net/smsc911x.c   |   50 +++++++++++++++++++++++++++++++++++++--------
- drivers/net/smsc911x.h   |    2 +-
- include/linux/smsc911x.h |   11 ++++++++++
- 3 files changed, 53 insertions(+), 10 deletions(-)
-
---- a/drivers/net/ethernet/smsc/smsc911x.c
-+++ b/drivers/net/ethernet/smsc/smsc911x.c
-@@ -1485,7 +1485,7 @@ static int smsc911x_open(struct net_devi
- 		SMSC_WARN(pdata, ifup,
- 			  "Timed out waiting for EEPROM busy bit to clear");
- 
--	smsc911x_reg_write(pdata, GPIO_CFG, 0x70070000);
-+ 	smsc911x_reg_write(pdata, GPIO_CFG, GPIO_CFG_LED1_EN_ | GPIO_CFG_LED2_EN_ | (1 << 20));
- 
- 	/* The soft reset above cleared the device's MAC address,
- 	 * restore it from local copy (set in probe) */
-@@ -1497,8 +1497,8 @@ static int smsc911x_open(struct net_devi
- 	smsc911x_reg_write(pdata, INT_EN, 0);
- 	smsc911x_reg_write(pdata, INT_STS, 0xFFFFFFFF);
- 
--	/* Set interrupt deassertion to 100uS */
--	intcfg = ((10 << 24) | INT_CFG_IRQ_EN_);
-+ 	/* Set interrupt deassertion to 22*10uS */
-+ 	intcfg = ((22 << 24) | INT_CFG_IRQ_EN_);
- 
- 	if (pdata->config.irq_polarity) {
- 		SMSC_TRACE(pdata, ifup, "irq polarity: active high");
-@@ -1524,7 +1524,7 @@ static int smsc911x_open(struct net_devi
- 	temp |= INT_EN_SW_INT_EN_;
- 	smsc911x_reg_write(pdata, INT_EN, temp);
- 
--	timeout = 1000;
-+	timeout = 2000;
- 	while (timeout--) {
- 		if (pdata->software_irq_signal)
- 			break;
-@@ -2332,6 +2332,38 @@ static inline int smsc911x_probe_config_
- }
- #endif /* CONFIG_OF */
- 
-+static inline unsigned int is_gumstix_oui(u8 *addr)
-+{
-+	return (addr[0] == 0x00 && addr[1] == 0x15 && addr[2] == 0xC9);
-+}
-+
-+/**
-+ * gen_serial_ether_addr - Generate software assigned Ethernet address
-+ * based on the system_serial number
-+ * @addr: Pointer to a six-byte array containing the Ethernet address
-+ *
-+ * Generate an Ethernet address (MAC) that is not multicast
-+ * and has the local assigned bit set, keyed on the system_serial
-+ */
-+static inline void gen_serial_ether_addr(u8 *addr)
-+{
-+	static u8 ether_serial_digit = 0;
-+	addr [0] = system_serial_high >> 8;
-+	addr [1] = system_serial_high;
-+	addr [2] = system_serial_low >> 24;
-+	addr [3] = system_serial_low >> 16;
-+	addr [4] = system_serial_low >> 8;
-+	addr [5] = (system_serial_low & 0xc0) |	/* top bits are from system serial */
-+		(1 << 4) |			/* 2 bits identify interface type 1=ether, 2=usb, 3&4 undef */
-+		((ether_serial_digit++) & 0x0f);	/* 15 possible interfaces of each type */
-+
-+	if(!is_gumstix_oui(addr))
-+	{
-+		addr [0] &= 0xfe;		/* clear multicast bit */
-+		addr [0] |= 0x02;		/* set local assignment bit (IEEE802) */
-+	}
-+}
-+
- static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
- {
- 	struct device_node *np = pdev->dev.of_node;
-@@ -2481,11 +2513,11 @@ static int __devinit smsc911x_drv_probe(
- 			SMSC_TRACE(pdata, probe,
- 				   "Mac Address is read from LAN911x EEPROM");
- 		} else {
--			/* eeprom values are invalid, generate random MAC */
--			random_ether_addr(dev->dev_addr);
-+			/* eeprom values are invalid, generate MAC from serial number */
-+			gen_serial_ether_addr(dev->dev_addr);
- 			smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
- 			SMSC_TRACE(pdata, probe,
--				   "MAC Address is set to random_ether_addr");
-+				"MAC Address is derived from system serial number");
- 		}
- 	}
- 
diff --git a/target/linux/pxa/patches-3.3/005-verdex_pcmcia_support.patch b/target/linux/pxa/patches-3.3/005-verdex_pcmcia_support.patch
deleted file mode 100644
index f369cf21d3..0000000000
--- a/target/linux/pxa/patches-3.3/005-verdex_pcmcia_support.patch
+++ /dev/null
@@ -1,236 +0,0 @@
-From 76a102bd5c9d792db19c6c72eafdecea0311a0c9 Mon Sep 17 00:00:00 2001
-From: Craig Hughes <craig@gumstix.com>
-Date: Fri, 30 Oct 2009 14:16:27 -0400
-Subject: [PATCH] [ARM] pxa: Gumstix Verdex PCMCIA support
-
-Needed for the Libertas CS wireless device.
-
-Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
----
- drivers/pcmcia/Kconfig          |    3 +-
- drivers/pcmcia/Makefile         |    3 +
- drivers/pcmcia/pxa2xx_gumstix.c |  194 +++++++++++++++++++++++++++++++++++++++
- 3 files changed, 199 insertions(+), 1 deletions(-)
- create mode 100644 drivers/pcmcia/pxa2xx_gumstix.c
-
---- a/drivers/pcmcia/Kconfig
-+++ b/drivers/pcmcia/Kconfig
-@@ -212,7 +212,7 @@ config PCMCIA_PXA2XX
- 		    || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
- 		    || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
- 		    || MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI \
--		    || MACH_COLIBRI320)
-+		    || MACH_COLIBRI320 || ARCH_GUMSTIX)
- 	select PCMCIA_SOC_COMMON
- 	help
- 	  Say Y here to include support for the PXA2xx PCMCIA controller
---- a/drivers/pcmcia/Makefile
-+++ b/drivers/pcmcia/Makefile
-@@ -70,6 +70,9 @@ pxa2xx-obj-$(CONFIG_MACH_BALLOON3)		+= p
- pxa2xx-obj-$(CONFIG_MACH_COLIBRI)		+= pxa2xx_colibri.o
- pxa2xx-obj-$(CONFIG_MACH_COLIBRI320)		+= pxa2xx_colibri.o
- 
-+pxa2xx-obj-$(CONFIG_MACH_GUMSTIX_VERDEX)	+= pxa2xx_cs.o
-+pxa2xx_cs-objs					:= pxa2xx_gumstix.o
-+
- obj-$(CONFIG_PCMCIA_PXA2XX)			+= pxa2xx_base.o $(pxa2xx-obj-y)
- 
- obj-$(CONFIG_PCMCIA_XXS1500)			+= xxs1500_ss.o
---- /dev/null
-+++ b/drivers/pcmcia/pxa2xx_gumstix.c
-@@ -0,0 +1,195 @@
-+/*
-+ * linux/drivers/pcmcia/pxa2xx_gumstix.c
-+ *
-+ * Gumstix PCMCIA specific routines. Based on Mainstone
-+ *
-+ * Copyright 2004, Craig Hughes <craig@gumstix.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/gpio.h>
-+
-+#include <linux/delay.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/gpio-pxa.h>
-+
-+#include <pcmcia/ss.h>
-+
-+#include <mach/hardware.h>
-+#include <asm/mach-types.h>
-+
-+#include <mach/pxa27x.h>
-+
-+#include <asm/io.h>
-+#include <mach/gpio.h>
-+#include <mach/gumstix.h>
-+#include "soc_common.h"
-+
-+#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
-+
-+#define BANK_OFF(n)     (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-+#define GPLR(x)         __REG2(0x40E00000, BANK_OFF((x) >> 5))
-+
-+static struct pcmcia_irqs gumstix_pcmcia_irqs0[] = {
-+	{ 0, GUMSTIX_S0_nCD_IRQ,	"CF0 nCD"     },
-+	{ 0, GUMSTIX_S0_nSTSCHG_IRQ,	"CF0 nSTSCHG" },
-+};
-+
-+static struct pcmcia_irqs gumstix_pcmcia_irqs1[] = {
-+	{ 1, GUMSTIX_S1_nCD_IRQ,	"CF1 nCD"     },
-+	{ 1, GUMSTIX_S1_nSTSCHG_IRQ,	"CF1 nSTSCHG" },
-+};
-+
-+
-+static int net_cf_vx_mode = 0;
-+
-+static int gumstix_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-+{
-+/* Note: The verdex_pcmcia_pin_config is moved to gumstix_verdex.c in order to use mfp_pxa2xx_config
-+   for board-specific pin configuration instead of the old deprecated pxa_gpio_mode function.  Thus,
-+   only the IRQ init is still needed to be done here. */
-+	skt->socket.pci_irq = (skt->nr == 0) ? ((net_cf_vx_mode == 0) ? GUMSTIX_S0_PRDY_nBSY_IRQ : GUMSTIX_S0_PRDY_nBSY_OLD_IRQ) : GUMSTIX_S1_PRDY_nBSY_IRQ;
-+
-+	return (skt->nr == 0) ? soc_pcmcia_request_irqs(skt, gumstix_pcmcia_irqs0, ARRAY_SIZE(gumstix_pcmcia_irqs0)) :
-+				soc_pcmcia_request_irqs(skt, gumstix_pcmcia_irqs1, ARRAY_SIZE(gumstix_pcmcia_irqs1));
-+}
-+
-+static void gumstix_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-+{
-+	if(skt->nr == 0)
-+	{
-+		soc_pcmcia_free_irqs(skt, gumstix_pcmcia_irqs0, ARRAY_SIZE(gumstix_pcmcia_irqs0));
-+	} else {
-+		soc_pcmcia_free_irqs(skt, gumstix_pcmcia_irqs1, ARRAY_SIZE(gumstix_pcmcia_irqs1));
-+	}
-+
-+	if (net_cf_vx_mode) {
-+	    	gpio_free(GPIO_GUMSTIX_CF_OLD_RESET);
-+	} else {
-+		gpio_free(GPIO_GUMSTIX_CF_RESET);
-+	}
-+
-+}
-+
-+static void gumstix_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-+				    struct pcmcia_state *state)
-+{
-+	unsigned int cd, prdy_nbsy, nbvd1;
-+	if(skt->nr == 0)
-+	{
-+		cd = GPIO_GUMSTIX_nCD_0;
-+		if(net_cf_vx_mode)
-+			prdy_nbsy = GPIO_GUMSTIX_PRDY_nBSY_0_OLD;
-+		else
-+			prdy_nbsy = GPIO_GUMSTIX_PRDY_nBSY_0;
-+		nbvd1 = GPIO_GUMSTIX_nBVD1_0;
-+	} else {
-+		cd = GPIO_GUMSTIX_nCD_1;
-+		prdy_nbsy = GPIO_GUMSTIX_PRDY_nBSY_1;
-+		nbvd1 = GPIO_GUMSTIX_nBVD1_1;
-+	}
-+	state->detect = !!gpio_get_value(cd);
-+	state->ready  = !!gpio_get_value(prdy_nbsy);
-+	state->bvd1   = !!gpio_get_value(nbvd1);
-+	state->bvd2   = 1;
-+	state->vs_3v  = 0;
-+	state->vs_Xv  = 0;
-+	state->wrprot = 0;
-+}
-+
-+static int gumstix_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-+				       const socket_state_t *state)
-+{
-+	return 0;
-+}
-+
-+static void gumstix_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
-+{
-+	if(skt->nr) {
-+		soc_pcmcia_enable_irqs(skt, gumstix_pcmcia_irqs0, ARRAY_SIZE(gumstix_pcmcia_irqs0));
-+	} else {
-+		soc_pcmcia_enable_irqs(skt, gumstix_pcmcia_irqs1, ARRAY_SIZE(gumstix_pcmcia_irqs1));
-+	}
-+}
-+
-+static void gumstix_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
-+{
-+	if(skt->nr) {
-+		soc_pcmcia_disable_irqs(skt, gumstix_pcmcia_irqs0, ARRAY_SIZE(gumstix_pcmcia_irqs0));
-+	} else {
-+		soc_pcmcia_disable_irqs(skt, gumstix_pcmcia_irqs1, ARRAY_SIZE(gumstix_pcmcia_irqs1));
-+	}
-+}
-+
-+static struct pcmcia_low_level gumstix_pcmcia_ops = {
-+	.owner			= THIS_MODULE,
-+	.hw_init		= gumstix_pcmcia_hw_init,
-+	.hw_shutdown		= gumstix_pcmcia_hw_shutdown,
-+	.socket_state		= gumstix_pcmcia_socket_state,
-+	.configure_socket	= gumstix_pcmcia_configure_socket,
-+	.socket_init		= gumstix_pcmcia_socket_init,
-+	.socket_suspend		= gumstix_pcmcia_socket_suspend,
-+	.nr			= 2,
-+};
-+
-+static struct platform_device *gumstix_pcmcia_device;
-+
-+extern int __init gumstix_get_cf_cards(void);
-+
-+#ifdef CONFIG_MACH_GUMSTIX_VERDEX
-+extern int __init gumstix_check_if_netCF_vx(void);
-+#endif
-+
-+static int __init gumstix_pcmcia_init(void)
-+{
-+	int ret;
-+
-+#ifdef CONFIG_MACH_GUMSTIX_VERDEX
-+	net_cf_vx_mode = gumstix_check_if_netCF_vx();
-+#endif
-+
-+	gumstix_pcmcia_ops.nr = gumstix_get_cf_cards();
-+
-+	gumstix_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-+	if (!gumstix_pcmcia_device)
-+		return -ENOMEM;
-+
-+	ret = platform_device_add_data(gumstix_pcmcia_device, &gumstix_pcmcia_ops,
-+				       sizeof(gumstix_pcmcia_ops));
-+
-+	if (ret == 0) {
-+		printk(KERN_INFO "Registering gumstix PCMCIA interface.\n");
-+		ret = platform_device_add(gumstix_pcmcia_device);
-+	}
-+
-+	if (ret)
-+		platform_device_put(gumstix_pcmcia_device);
-+
-+	return ret;
-+}
-+
-+static void __exit gumstix_pcmcia_exit(void)
-+{
-+	/*
-+	 * This call is supposed to free our gumstix_pcmcia_device.
-+	 * Unfortunately platform_device don't have a free method, and
-+	 * we can't assume it's free of any reference at this point so we
-+	 * can't free it either.
-+	 */
-+	platform_device_unregister(gumstix_pcmcia_device);
-+}
-+
-+fs_initcall(gumstix_pcmcia_init);
-+module_exit(gumstix_pcmcia_exit);
-+
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/pxa/patches-3.3/a01-arm-debugll-printk.patch b/target/linux/pxa/patches-3.3/a01-arm-debugll-printk.patch
deleted file mode 100644
index f1bf48dd54..0000000000
--- a/target/linux/pxa/patches-3.3/a01-arm-debugll-printk.patch
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/kernel/printk.c
-+++ b/kernel/printk.c
-@@ -44,6 +44,10 @@
- 
- #include <asm/uaccess.h>
- 
-+#ifdef CONFIG_DEBUG_LL
-+extern void printascii(char *);
-+#endif /* CONFIG_DEBUG_LL */
-+
- /*
-  * Architectures can override it:
-  */
-@@ -900,6 +904,10 @@ asmlinkage int vprintk(const char *fmt,
- 		}
- 	}
- 
-+#ifdef CONFIG_DEBUG_LL
-+	printascii(printk_buf);
-+#endif
-+
- 	/*
- 	 * Copy the output into log_buf. If the caller didn't provide
- 	 * the appropriate log prefix, we insert them here