upgrade to 2.6.32.7, switch to squashfs, remove broken flag

SVN-Revision: 19562

1 files changed, 0 insertions, 356 deletions

diff --git a/target/linux/pxa/patches-2.6.21/037-gumstix-pxa270-usb-host.patch b/target/linux/pxa/patches-2.6.21/037-gumstix-pxa270-usb-host.patch
deleted file mode 100644
index 8b43765ce9..0000000000
--- a/target/linux/pxa/patches-2.6.21/037-gumstix-pxa270-usb-host.patch
+++ /dev/null
@@ -1,356 +0,0 @@
---- a/arch/arm/mach-pxa/gumstix.c
-+++ b/arch/arm/mach-pxa/gumstix.c
-@@ -22,6 +22,7 @@
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
- #include <asm/mach/irq.h>
-+#include <asm/arch/ohci.h>
- #include <asm/arch/udc.h>
- #include <asm/arch/mmc.h>
- #include <asm/arch/pxa-regs.h>
-@@ -178,9 +179,34 @@ static struct platform_device *devices[]
- 	&gum_audio_device,
- };
- 
-+#ifdef CONFIG_ARCH_GUMSTIX_VERDEX
-+static int gumstix_ohci_init(struct device *dev)
-+{
-+	/* setup Port1 GPIO pin. */
-+	//pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN);	/* USBHPWR1 */
-+	//pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT);	/* USBHPEN1 */
-+
-+	// Turn on port 2 in host mode
-+	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
-+
-+	UHCHR = (UHCHR) &
-+		~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
-+
-+	return 0;
-+}
-+
-+static struct pxaohci_platform_data gumstix_ohci_platform_data = {
-+	.port_mode	= PMM_PERPORT_MODE,
-+	.init		= gumstix_ohci_init,
-+};
-+#endif
-+
- static void __init gumstix_init(void)
- {
- 	pxa_set_mci_info(&gumstix_mci_platform_data);
-+#ifdef CONFIG_ARCH_GUMSTIX_VERDEX
-+	pxa_set_ohci_info(&gumstix_ohci_platform_data);
-+#endif
- 	pxa_set_udc_info(&gumstix_udc_info);
- #if defined(CONFIG_FB_PXA_ALPS_CDOLLAR) | defined(CONFIG_FB_PXA_SHARP_LQ043_PSP) | defined(CONFIG_FB_PXA_SAMSUNG_LTE430WQ_F0C)
- 	set_pxa_fb_info(&gumstix_fb_info);
---- a/drivers/usb/gadget/ether.c
-+++ b/drivers/usb/gadget/ether.c
-@@ -260,6 +260,8 @@ MODULE_PARM_DESC(host_addr, "Host Ethern
- 
- #ifdef CONFIG_USB_GADGET_PXA27X
- #define DEV_CONFIG_CDC
-+extern struct usb_ep* pxa27x_ep_config(struct usb_gadget *gadget,
-+	struct usb_endpoint_descriptor *desc,int config,int interface,int alt);
- #endif
- 
- #ifdef CONFIG_USB_GADGET_S3C2410
-@@ -482,15 +484,15 @@ eth_config = {
- #ifdef	CONFIG_USB_ETH_RNDIS
- static struct usb_config_descriptor
- rndis_config = {
--	.bLength =              sizeof rndis_config,
-+	.bLength =	      sizeof rndis_config,
- 	.bDescriptorType =      USB_DT_CONFIG,
- 
- 	/* compute wTotalLength on the fly */
--	.bNumInterfaces =       2,
-+	.bNumInterfaces =	2,
- 	.bConfigurationValue =  DEV_RNDIS_CONFIG_VALUE,
--	.iConfiguration =       STRING_RNDIS,
-+	.iConfiguration =	STRING_RNDIS,
- 	.bmAttributes =		USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
--	.bMaxPower =            50,
-+	.bMaxPower =	    50,
- };
- #endif
- 
-@@ -532,15 +534,15 @@ control_intf = {
- #ifdef	CONFIG_USB_ETH_RNDIS
- static const struct usb_interface_descriptor
- rndis_control_intf = {
--	.bLength =              sizeof rndis_control_intf,
-+	.bLength =	      sizeof rndis_control_intf,
- 	.bDescriptorType =      USB_DT_INTERFACE,
- 
- 	.bInterfaceNumber =     0,
--	.bNumEndpoints =        1,
-+	.bNumEndpoints =	1,
- 	.bInterfaceClass =      USB_CLASS_COMM,
- 	.bInterfaceSubClass =   USB_CDC_SUBCLASS_ACM,
- 	.bInterfaceProtocol =   USB_CDC_ACM_PROTO_VENDOR,
--	.iInterface =           STRING_RNDIS_CONTROL,
-+	.iInterface =	   STRING_RNDIS_CONTROL,
- };
- #endif
- 
-@@ -1342,7 +1344,7 @@ static void rndis_response_complete (str
- 
- static void rndis_command_complete (struct usb_ep *ep, struct usb_request *req)
- {
--	struct eth_dev          *dev = ep->driver_data;
-+	struct eth_dev	  *dev = ep->driver_data;
- 	int			status;
- 
- 	/* received RNDIS command from USB_CDC_SEND_ENCAPSULATED_COMMAND */
-@@ -1578,7 +1580,7 @@ done_set_intf:
- 
- 			/* return the result */
- 			buf = rndis_get_next_response (dev->rndis_config,
--						       &value);
-+							&value);
- 			if (buf) {
- 				memcpy (req->buf, buf, value);
- 				req->complete = rndis_response_complete;
-@@ -2064,7 +2066,7 @@ static void eth_req_free (struct usb_ep 
- static void
- rndis_control_ack_complete (struct usb_ep *ep, struct usb_request *req)
- {
--	struct eth_dev          *dev = ep->driver_data;
-+	struct eth_dev	  *dev = ep->driver_data;
- 
- 	if (req->status || req->actual != req->length)
- 		DEBUG (dev,
-@@ -2415,7 +2417,27 @@ eth_bind (struct usb_gadget *gadget)
- 
- 	/* all we really need is bulk IN/OUT */
- 	usb_ep_autoconfig_reset (gadget);
-+#ifdef CONFIG_USB_GADGET_PXA27X 
-+#ifdef  CONFIG_USB_ETH_RNDIS
-+	in_ep = pxa27x_ep_config (gadget, &fs_source_desc,
-+			DEV_RNDIS_CONFIG_VALUE,
-+			(int)rndis_data_intf.bInterfaceNumber,
-+			(int)rndis_data_intf.bAlternateSetting);
-+#elif   defined(DEV_CONFIG_CDC) 
-+	in_ep = pxa27x_ep_config (gadget, &fs_source_desc,
-+			DEV_CONFIG_VALUE,
-+			(int)data_intf.bInterfaceNumber,
-+			(int)data_intf.bAlternateSetting);
-+#elif   defined(DEV_CONFIG_SUBSET)		      
-+	in_ep = pxa27x_ep_config (gadget, &fs_source_desc,
-+			DEV_CONFIG_VALUE,
-+			(int)subset_data_intf.bInterfaceNumber,
-+			(int)subset_data_intf.bAlternateSetting);
-+
-+#endif //CONFIG_USB_ETH_RNDIS
-+#else
- 	in_ep = usb_ep_autoconfig (gadget, &fs_source_desc);
-+#endif //CONFIG_USB_GADGET_PXA27X
- 	if (!in_ep) {
- autoconf_fail:
- 		dev_err (&gadget->dev,
-@@ -2425,7 +2447,26 @@ autoconf_fail:
- 	}
- 	in_ep->driver_data = in_ep;	/* claim */
- 
-+#ifdef  CONFIG_USB_GADGET_PXA27X	
-+#ifdef  CONFIG_USB_ETH_RNDIS
-+	out_ep = pxa27x_ep_config (gadget, &fs_sink_desc,
-+			DEV_RNDIS_CONFIG_VALUE,
-+			(int)rndis_data_intf.bInterfaceNumber,
-+			(int)rndis_data_intf.bAlternateSetting);
-+#elif   defined(DEV_CONFIG_CDC)
-+	out_ep = pxa27x_ep_config (gadget, &fs_sink_desc,
-+			DEV_CONFIG_VALUE,
-+			(int)data_intf.bInterfaceNumber,
-+			(int)data_intf.bAlternateSetting);
-+#elif   defined(DEV_CONFIG_SUBSET)		      
-+	out_ep = pxa27x_ep_config (gadget, &fs_sink_desc,
-+			DEV_CONFIG_VALUE,
-+			(int)subset_data_intf.bInterfaceNumber,
-+			(int)subset_data_intf.bAlternateSetting);
-+#endif //CONFIG_USB_ETH_RNDIS
-+#else
- 	out_ep = usb_ep_autoconfig (gadget, &fs_sink_desc);
-+#endif //CONFIG_USB_GADGET_PXA27X
- 	if (!out_ep)
- 		goto autoconf_fail;
- 	out_ep->driver_data = out_ep;	/* claim */
-@@ -2435,7 +2476,22 @@ autoconf_fail:
- 	 * Since some hosts expect one, try to allocate one anyway.
- 	 */
- 	if (cdc || rndis) {
-+#ifdef  CONFIG_USB_GADGET_PXA27X	
-+#ifdef  CONFIG_USB_ETH_RNDIS
-+		status_ep = pxa27x_ep_config (gadget, &fs_status_desc,
-+				DEV_RNDIS_CONFIG_VALUE,
-+				(int)rndis_control_intf.bInterfaceNumber,
-+				(int)rndis_control_intf.bAlternateSetting);
-+#elif   defined(DEV_CONFIG_CDC)
-+		status_ep = pxa27x_ep_config (gadget, &fs_status_desc,
-+				DEV_CONFIG_VALUE,
-+				(int)control_intf.bInterfaceNumber,
-+				(int)control_intf.bAlternateSetting);
-+
-+#endif //CONFIG_USB_ETH_RNDIS
-+#else
- 		status_ep = usb_ep_autoconfig (gadget, &fs_status_desc);
-+#endif //CONFIG_USB_GADGET_PXA27X
- 		if (status_ep) {
- 			status_ep->driver_data = status_ep;	/* claim */
- 		} else if (rndis) {
-@@ -2444,11 +2500,13 @@ autoconf_fail:
- 				gadget->name);
- 			return -ENODEV;
- #ifdef DEV_CONFIG_CDC
-+#ifndef CONFIG_USB_GADGET_PXA27X
- 		/* pxa25x only does CDC subset; often used with RNDIS */
- 		} else if (cdc) {
- 			control_intf.bNumEndpoints = 0;
- 			/* FIXME remove endpoint from descriptor list */
- #endif
-+#endif
- 		}
- 	}
- #endif
---- a/drivers/usb/gadget/file_storage.c
-+++ b/drivers/usb/gadget/file_storage.c
-@@ -280,6 +280,12 @@ MODULE_LICENSE("Dual BSD/GPL");
- #define DRIVER_PRODUCT_ID	0xa4a5	// Linux-USB File-backed Storage Gadget
- 
- 
-+
-+#ifdef CONFIG_USB_GADGET_PXA27X
-+extern struct usb_ep* pxa27x_ep_config(struct usb_gadget *gadget,
-+	struct usb_endpoint_descriptor *desc,int config,int interface,int alt);
-+#endif
-+
- /*
-  * This driver assumes self-powered hardware and has no way for users to
-  * trigger remote wakeup.  It uses autoconfiguration to select endpoints
-@@ -3920,20 +3926,32 @@ static int __init fsg_bind(struct usb_ga
- 
- 	/* Find all the endpoints we will use */
- 	usb_ep_autoconfig_reset(gadget);
-+#ifdef CONFIG_USB_GADGET_PXA27X
-+	ep = pxa27x_ep_config(gadget, &fs_bulk_in_desc, CONFIG_VALUE, 0, 0);
-+#else
- 	ep = usb_ep_autoconfig(gadget, &fs_bulk_in_desc);
-+#endif
- 	if (!ep)
- 		goto autoconf_fail;
- 	ep->driver_data = fsg;		// claim the endpoint
- 	fsg->bulk_in = ep;
- 
-+#ifdef CONFIG_USB_GADGET_PXA27X
-+	ep = pxa27x_ep_config(gadget, &fs_bulk_out_desc, CONFIG_VALUE, 0, 0);
-+#else
- 	ep = usb_ep_autoconfig(gadget, &fs_bulk_out_desc);
-+#endif
- 	if (!ep)
- 		goto autoconf_fail;
- 	ep->driver_data = fsg;		// claim the endpoint
- 	fsg->bulk_out = ep;
- 
- 	if (transport_is_cbi()) {
-+#ifdef CONFIG_USB_GADGET_PXA27X
-+		ep = pxa27x_ep_config(gadget, &fs_intr_in_desc, CONFIG_VALUE, 0, 0);
-+#else
- 		ep = usb_ep_autoconfig(gadget, &fs_intr_in_desc);
-+#endif
- 		if (!ep)
- 			goto autoconf_fail;
- 		ep->driver_data = fsg;		// claim the endpoint
-@@ -4063,6 +4081,7 @@ autoconf_fail:
- 	rc = -ENOTSUPP;
- 
- out:
-+	ERROR(fsg, "cleaning up on the way out\n");
- 	fsg->state = FSG_STATE_TERMINATED;	// The thread is dead
- 	fsg_unbind(gadget);
- 	close_all_backing_files(fsg);
---- a/drivers/usb/gadget/serial.c
-+++ b/drivers/usb/gadget/serial.c
-@@ -126,6 +126,10 @@ static int debug = 1;
- #define GS_LOG2_NOTIFY_INTERVAL		5	/* 1 << 5 == 32 msec */
- #define GS_NOTIFY_MAXPACKET		8
- 
-+#ifdef CONFIG_USB_GADGET_PXA27X
-+extern struct usb_ep* pxa27x_ep_config(struct usb_gadget *gadget,
-+	struct usb_endpoint_descriptor *desc,int config,int interface,int alt);
-+#endif
- 
- /* Structures */
- 
-@@ -1378,20 +1382,32 @@ static int __init gs_bind(struct usb_gad
- 
- 	usb_ep_autoconfig_reset(gadget);
- 
-+#ifdef CONFIG_USB_GADGET_PXA27X
-+	ep = pxa27x_ep_config(gadget, &gs_fullspeed_in_desc, use_acm ? GS_ACM_CONFIG_ID : GS_BULK_CONFIG_ID, gs_bulk_interface_desc.bInterfaceNumber, gs_bulk_interface_desc.bAlternateSetting);
-+#else
- 	ep = usb_ep_autoconfig(gadget, &gs_fullspeed_in_desc);
-+#endif
- 	if (!ep)
- 		goto autoconf_fail;
- 	EP_IN_NAME = ep->name;
- 	ep->driver_data = ep;	/* claim the endpoint */
- 
-+#ifdef CONFIG_USB_GADGET_PXA27X
-+	ep = pxa27x_ep_config(gadget, &gs_fullspeed_out_desc, use_acm ? GS_ACM_CONFIG_ID : GS_BULK_CONFIG_ID, gs_bulk_interface_desc.bInterfaceNumber, gs_bulk_interface_desc.bAlternateSetting);
-+#else
- 	ep = usb_ep_autoconfig(gadget, &gs_fullspeed_out_desc);
-+#endif
- 	if (!ep)
- 		goto autoconf_fail;
- 	EP_OUT_NAME = ep->name;
- 	ep->driver_data = ep;	/* claim the endpoint */
- 
- 	if (use_acm) {
-+#ifdef CONFIG_USB_GADGET_PXA27X
-+		ep = pxa27x_ep_config(gadget, &gs_fullspeed_notify_desc, GS_BULK_CONFIG_ID, gs_control_interface_desc.bInterfaceNumber, gs_control_interface_desc.bAlternateSetting);
-+#else
- 		ep = usb_ep_autoconfig(gadget, &gs_fullspeed_notify_desc);
-+#endif
- 		if (!ep) {
- 			printk(KERN_ERR "gs_bind: cannot run ACM on %s\n", gadget->name);
- 			goto autoconf_fail;
---- a/drivers/usb/gadget/zero.c
-+++ b/drivers/usb/gadget/zero.c
-@@ -212,6 +212,11 @@ module_param (loopdefault, bool, S_IRUGO
- #define STRING_SOURCE_SINK		250
- #define STRING_LOOPBACK			251
- 
-+#ifdef CONFIG_USB_GADGET_PXA27X
-+extern struct usb_ep* pxa27x_ep_config(struct usb_gadget *gadget,
-+	struct usb_endpoint_descriptor *desc,int config,int interface,int alt);
-+#endif
-+
- /*
-  * This device advertises two configurations; these numbers work
-  * on a pxa250 as well as more flexible hardware.
-@@ -1155,7 +1160,11 @@ zero_bind (struct usb_gadget *gadget)
- 	 * but there may also be important quirks to address.
- 	 */
- 	usb_ep_autoconfig_reset (gadget);
-+#ifdef CONFIG_USB_GADGET_PXA27X
-+	ep = pxa27x_ep_config(gadget, &fs_source_desc, CONFIG_SOURCE_SINK, source_sink_intf.bInterfaceNumber, source_sink_intf.bAlternateSetting);
-+#else
- 	ep = usb_ep_autoconfig (gadget, &fs_source_desc);
-+#endif
- 	if (!ep) {
- autoconf_fail:
- 		printk (KERN_ERR "%s: can't autoconfigure on %s\n",
-@@ -1164,8 +1173,12 @@ autoconf_fail:
- 	}
- 	EP_IN_NAME = ep->name;
- 	ep->driver_data = ep;	/* claim */
--	
-+
-+#ifdef CONFIG_USB_GADGET_PXA27X
-+	ep = pxa27x_ep_config(gadget, &fs_sink_desc, CONFIG_SOURCE_SINK, source_sink_intf.bInterfaceNumber, source_sink_intf.bAlternateSetting);
-+#else
- 	ep = usb_ep_autoconfig (gadget, &fs_sink_desc);
-+#endif
- 	if (!ep)
- 		goto autoconf_fail;
- 	EP_OUT_NAME = ep->name;