diff options
| author | Daniel Golle <daniel@makrotopia.org> | 2022-10-21 18:59:37 +0100 |
|---|---|---|
| committer | Daniel Golle <daniel@makrotopia.org> | 2022-10-21 20:57:53 +0100 |
| commit | 63ff5b783d227bcdfb8db4500b84a3acf68b0f4c (patch) | |
| tree | 7f620af901ac1b45832d83c119663c5a7c60c954 /target/linux/oxnas/patches-5.10/800-oxnas-ehci.patch | |
| parent | 6d4bcadaa343cb969f370631a5ed5338306c056e (diff) | |
| download | upstream-63ff5b783d227bcdfb8db4500b84a3acf68b0f4c.tar.gz upstream-63ff5b783d227bcdfb8db4500b84a3acf68b0f4c.tar.bz2 upstream-63ff5b783d227bcdfb8db4500b84a3acf68b0f4c.zip | |
oxnas: switch to Linux 5.15 and drop Linux 5.10
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Diffstat (limited to 'target/linux/oxnas/patches-5.10/800-oxnas-ehci.patch')
| -rw-r--r-- | target/linux/oxnas/patches-5.10/800-oxnas-ehci.patch | 73 |
1 files changed, 0 insertions, 73 deletions
diff --git a/target/linux/oxnas/patches-5.10/800-oxnas-ehci.patch b/target/linux/oxnas/patches-5.10/800-oxnas-ehci.patch deleted file mode 100644 index 8b4d943810..0000000000 --- a/target/linux/oxnas/patches-5.10/800-oxnas-ehci.patch +++ /dev/null @@ -1,73 +0,0 @@ ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -350,6 +350,13 @@ config USB_OCTEON_EHCI - USB 2.0 device support. All CN6XXX based chips with USB are - supported. - -+config USB_EHCI_OXNAS -+ tristate "OXNAS EHCI Module" -+ depends on USB_EHCI_HCD && ARCH_OXNAS -+ select USB_EHCI_ROOT_HUB_TT -+ help -+ Enable support for the OX820 SOC's on-chip EHCI controller. -+ - endif # USB_EHCI_HCD - - config USB_OXU210HP_HCD ---- a/drivers/usb/host/Makefile -+++ b/drivers/usb/host/Makefile -@@ -48,6 +48,7 @@ obj-$(CONFIG_USB_EHCI_HCD_SPEAR) += ehci - obj-$(CONFIG_USB_EHCI_HCD_STI) += ehci-st.o - obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o - obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o -+obj-$(CONFIG_USB_EHCI_OXNAS) += ehci-oxnas.o - obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o - obj-$(CONFIG_USB_EHCI_BRCMSTB) += ehci-brcm.o - ---- a/arch/arm/boot/dts/ox820.dtsi -+++ b/arch/arm/boot/dts/ox820.dtsi -@@ -106,6 +106,31 @@ - status = "disabled"; - }; - -+ ehci: ehci@40200100 { -+ compatible = "plxtech,nas782x-ehci"; -+ reg = <0x40200100 0xf00>; -+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; -+ clocks = <&stdclk CLK_820_USBMPH>, <&pllb>, <&stdclk CLK_820_REF600>; -+ clock-names = "usb", "refsrc", "phyref"; -+ resets = <&reset RESET_USBHS>, <&reset RESET_USBPHYA>, <&reset RESET_USBPHYB>; -+ reset-names = "host", "phya", "phyb"; -+ oxsemi,sys-ctrl = <&sys>; -+ /* Otherwise ref300 is used, which is derived from sata phy -+ * in that case, usb depends on sata initialization */ -+ /* FIXME: how to make this dependency explicit ? */ -+ oxsemi,ehci_use_pllb; -+ status = "disabled"; -+ -+ ehci_port1: port@1 { -+ reg = <1>; -+ #trigger-source-cells = <0>; -+ }; -+ ehci_port2: port@2 { -+ reg = <2>; -+ #trigger-source-cells = <0>; -+ }; -+ }; -+ - apb-bridge@44000000 { - #address-cells = <1>; - #size-cells = <1>; ---- a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts -+++ b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts -@@ -105,6 +105,10 @@ - }; - }; - -+&ehci { -+ status = "okay"; -+}; -+ - ða { - status = "okay"; - |