aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/oxnas/files/drivers/pci/host
diff options
context:
space:
mode:
authorDaniel Golle <daniel@makrotopia.org>2018-05-31 17:28:38 +0200
committerDaniel Golle <daniel@makrotopia.org>2018-06-01 15:45:06 +0200
commit17511a7ea86a34b5a5cfd4831d3a2e8a9e0cc005 (patch)
tree430bec140ba8a22a60f5422f79e4304b3cbaf1b5 /target/linux/oxnas/files/drivers/pci/host
parent91b5b2e20d531584918c62a6c6cd046f0580f50a (diff)
downloadupstream-17511a7ea86a34b5a5cfd4831d3a2e8a9e0cc005.tar.gz
upstream-17511a7ea86a34b5a5cfd4831d3a2e8a9e0cc005.tar.bz2
upstream-17511a7ea86a34b5a5cfd4831d3a2e8a9e0cc005.zip
oxnas: kill old oxnas target
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Diffstat (limited to 'target/linux/oxnas/files/drivers/pci/host')
-rw-r--r--target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c676
1 files changed, 0 insertions, 676 deletions
diff --git a/target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c b/target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c
deleted file mode 100644
index 9e8d6d9f93..0000000000
--- a/target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c
+++ /dev/null
@@ -1,676 +0,0 @@
-/*
- * PCIe driver for PLX NAS782X SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/clk.h>
-#include <linux/module.h>
-#include <linux/mbus.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/of_address.h>
-#include <linux/of_pci.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/of_gpio.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/reset.h>
-#include <mach/iomap.h>
-#include <mach/hardware.h>
-#include <mach/utils.h>
-
-#define VERSION_ID_MAGIC 0x082510b5
-#define LINK_UP_TIMEOUT_SECONDS 1
-#define NUM_CONTROLLERS 1
-
-enum {
- PCIE_DEVICE_TYPE_MASK = 0x0F,
- PCIE_DEVICE_TYPE_ENDPOINT = 0,
- PCIE_DEVICE_TYPE_LEGACY_ENDPOINT = 1,
- PCIE_DEVICE_TYPE_ROOT = 4,
-
- PCIE_LTSSM = BIT(4),
- PCIE_READY_ENTR_L23 = BIT(9),
- PCIE_LINK_UP = BIT(11),
- PCIE_OBTRANS = BIT(12),
-};
-
-enum {
- HCSL_BIAS_ON = BIT(0),
- HCSL_PCIE_EN = BIT(1),
- HCSL_PCIEA_EN = BIT(2),
- HCSL_PCIEB_EN = BIT(3),
-};
-
-enum {
- /* pcie phy reg offset */
- PHY_ADDR = 0,
- PHY_DATA = 4,
- /* phy data reg bits */
- READ_EN = BIT(16),
- WRITE_EN = BIT(17),
- CAP_DATA = BIT(18),
-};
-
-/* core config registers */
-enum {
- PCI_CONFIG_VERSION_DEVICEID = 0,
- PCI_CONFIG_COMMAND_STATUS = 4,
-};
-
-/* inbound config registers */
-enum {
- IB_ADDR_XLATE_ENABLE = 0xFC,
-
- /* bits */
- ENABLE_IN_ADDR_TRANS = BIT(0),
-};
-
-/* outbound config registers, offset relative to PCIE_POM0_MEM_ADDR */
-enum {
- PCIE_POM0_MEM_ADDR = 0,
- PCIE_POM1_MEM_ADDR = 4,
- PCIE_IN0_MEM_ADDR = 8,
- PCIE_IN1_MEM_ADDR = 12,
- PCIE_IN_IO_ADDR = 16,
- PCIE_IN_CFG0_ADDR = 20,
- PCIE_IN_CFG1_ADDR = 24,
- PCIE_IN_MSG_ADDR = 28,
- PCIE_IN0_MEM_LIMIT = 32,
- PCIE_IN1_MEM_LIMIT = 36,
- PCIE_IN_IO_LIMIT = 40,
- PCIE_IN_CFG0_LIMIT = 44,
- PCIE_IN_CFG1_LIMIT = 48,
- PCIE_IN_MSG_LIMIT = 52,
- PCIE_AHB_SLAVE_CTRL = 56,
-
- PCIE_SLAVE_BE_SHIFT = 22,
-};
-
-#define ADDR_VAL(val) ((val) & 0xFFFF)
-#define DATA_VAL(val) ((val) & 0xFFFF)
-
-#define PCIE_SLAVE_BE(val) ((val) << PCIE_SLAVE_BE_SHIFT)
-#define PCIE_SLAVE_BE_MASK PCIE_SLAVE_BE(0xF)
-
-struct oxnas_pcie_shared {
- /* seems all access are serialized, no lock required */
- int refcount;
-};
-
-/* Structure representing one PCIe interfaces */
-struct oxnas_pcie {
- void __iomem *cfgbase;
- void __iomem *base;
- void __iomem *inbound;
- void __iomem *outbound;
- void __iomem *pcie_ctrl;
-
- int haslink;
- struct platform_device *pdev;
- struct resource io;
- struct resource cfg;
- struct resource pre_mem; /* prefetchable */
- struct resource non_mem; /* non-prefetchable */
- struct resource busn; /* max available bus numbers */
- int card_reset; /* gpio pin, optional */
- unsigned hcsl_en; /* hcsl pci enable bit */
- struct clk *clk;
- struct clk *busclk; /* for pcie bus, actually the PLLB */
- void *private_data[1];
- spinlock_t lock;
-};
-
-static struct oxnas_pcie_shared pcie_shared = {
- .refcount = 0,
-};
-
-static inline struct oxnas_pcie *sys_to_pcie(struct pci_sys_data *sys)
-{
- return sys->private_data;
-}
-
-
-static inline void set_out_lanes(struct oxnas_pcie *pcie, unsigned lanes)
-{
- oxnas_register_value_mask(pcie->outbound + PCIE_AHB_SLAVE_CTRL,
- PCIE_SLAVE_BE_MASK, PCIE_SLAVE_BE(lanes));
- wmb();
-}
-
-static int oxnas_pcie_link_up(struct oxnas_pcie *pcie)
-{
- unsigned long end;
-
- /* Poll for PCIE link up */
- end = jiffies + (LINK_UP_TIMEOUT_SECONDS * HZ);
- while (!time_after(jiffies, end)) {
- if (readl(pcie->pcie_ctrl) & PCIE_LINK_UP)
- return 1;
- }
- return 0;
-}
-
-static void __init oxnas_pcie_setup_hw(struct oxnas_pcie *pcie)
-{
- /* We won't have any inbound address translation. This allows PCI
- * devices to access anywhere in the AHB address map. Might be regarded
- * as a bit dangerous, but let's get things working before we worry
- * about that
- */
- oxnas_register_clear_mask(pcie->inbound + IB_ADDR_XLATE_ENABLE,
- ENABLE_IN_ADDR_TRANS);
- wmb();
-
- /*
- * Program outbound translation windows
- *
- * Outbound window is what is referred to as "PCI client" region in HRM
- *
- * Could use the larger alternative address space to get >>64M regions
- * for graphics cards etc., but will not bother at this point.
- *
- * IP bug means that AMBA window size must be a power of 2
- *
- * Set mem0 window for first 16MB of outbound window non-prefetchable
- * Set mem1 window for second 16MB of outbound window prefetchable
- * Set io window for next 16MB of outbound window
- * Set cfg0 for final 1MB of outbound window
- *
- * Ignore mem1, cfg1 and msg windows for now as no obvious use cases for
- * 820 that would need them
- *
- * Probably ideally want no offset between mem0 window start as seen by
- * ARM and as seen on PCI bus and get Linux to assign memory regions to
- * PCI devices using the same "PCI client" region start address as seen
- * by ARM
- */
-
- /* Set PCIeA mem0 region to be 1st 16MB of the 64MB PCIeA window */
- writel_relaxed(pcie->non_mem.start, pcie->outbound + PCIE_IN0_MEM_ADDR);
- writel_relaxed(pcie->non_mem.end, pcie->outbound + PCIE_IN0_MEM_LIMIT);
- writel_relaxed(pcie->non_mem.start, pcie->outbound + PCIE_POM0_MEM_ADDR);
-
- /* Set PCIeA mem1 region to be 2nd 16MB of the 64MB PCIeA window */
- writel_relaxed(pcie->pre_mem.start, pcie->outbound + PCIE_IN1_MEM_ADDR);
- writel_relaxed(pcie->pre_mem.end, pcie->outbound + PCIE_IN1_MEM_LIMIT);
- writel_relaxed(pcie->pre_mem.start, pcie->outbound + PCIE_POM1_MEM_ADDR);
-
- /* Set PCIeA io to be third 16M region of the 64MB PCIeA window*/
- writel_relaxed(pcie->io.start, pcie->outbound + PCIE_IN_IO_ADDR);
- writel_relaxed(pcie->io.end, pcie->outbound + PCIE_IN_IO_LIMIT);
-
- /* Set PCIeA cgf0 to be last 16M region of the 64MB PCIeA window*/
- writel_relaxed(pcie->cfg.start, pcie->outbound + PCIE_IN_CFG0_ADDR);
- writel_relaxed(pcie->cfg.end, pcie->outbound + PCIE_IN_CFG0_LIMIT);
- wmb();
-
- /* Enable outbound address translation */
- oxnas_register_set_mask(pcie->pcie_ctrl, PCIE_OBTRANS);
- wmb();
-
- /*
- * Program PCIe command register for core to:
- * enable memory space
- * enable bus master
- * enable io
- */
- writel_relaxed(7, pcie->base + PCI_CONFIG_COMMAND_STATUS);
- /* which is which */
- wmb();
-}
-
-static unsigned oxnas_pcie_cfg_to_offset(
- struct pci_sys_data *sys,
- unsigned char bus_number,
- unsigned int devfn,
- int where)
-{
- unsigned int function = PCI_FUNC(devfn);
- unsigned int slot = PCI_SLOT(devfn);
- unsigned char bus_number_offset;
-
- bus_number_offset = bus_number - sys->busnr;
-
- /*
- * We'll assume for now that the offset, function, slot, bus encoding
- * should map onto linear, contiguous addresses in PCIe config space,
- * albeit that the majority will be unused as only slot 0 is valid for
- * any PCIe bus and most devices have only function 0
- *
- * Could be that PCIe in fact works by not encoding the slot number into
- * the config space address as it's known that only slot 0 is valid.
- * We'll have to experiment if/when we get a PCIe switch connected to
- * the PCIe host
- */
- return (bus_number_offset << 20) | (slot << 15) | (function << 12) |
- (where & ~3);
-}
-
-/* PCI configuration space write function */
-static int oxnas_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
- int where, int size, u32 val)
-{
- unsigned long flags;
- struct oxnas_pcie *pcie = sys_to_pcie(bus->sysdata);
- unsigned offset;
- u32 value;
- u32 lanes;
-
- /* Only a single device per bus for PCIe point-to-point links */
- if (PCI_SLOT(devfn) > 0)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- if (!pcie->haslink)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- offset = oxnas_pcie_cfg_to_offset(bus->sysdata, bus->number, devfn,
- where);
-
- value = val << (8 * (where & 3));
- lanes = (0xf >> (4-size)) << (where & 3);
- /* it race with mem and io write, but the possibility is low, normally
- * all config writes happens at driver initialize stage, wont interleave
- * with others.
- * and many pcie cards use dword (4bytes) access mem/io access only,
- * so not bother to copy that ugly work-around now. */
- spin_lock_irqsave(&pcie->lock, flags);
- set_out_lanes(pcie, lanes);
- writel_relaxed(value, pcie->cfgbase + offset);
- set_out_lanes(pcie, 0xf);
- spin_unlock_irqrestore(&pcie->lock, flags);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/* PCI configuration space read function */
-static int oxnas_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
- int size, u32 *val)
-{
- struct oxnas_pcie *pcie = sys_to_pcie(bus->sysdata);
- unsigned offset;
- u32 value;
- u32 left_bytes, right_bytes;
-
- /* Only a single device per bus for PCIe point-to-point links */
- if (PCI_SLOT(devfn) > 0) {
- *val = 0xffffffff;
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
-
- if (!pcie->haslink) {
- *val = 0xffffffff;
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
-
- offset = oxnas_pcie_cfg_to_offset(bus->sysdata, bus->number, devfn,
- where);
- value = readl_relaxed(pcie->cfgbase + offset);
- left_bytes = where & 3;
- right_bytes = 4 - left_bytes - size;
- value <<= right_bytes * 8;
- value >>= (left_bytes + right_bytes) * 8;
- *val = value;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops oxnas_pcie_ops = {
- .read = oxnas_pcie_rd_conf,
- .write = oxnas_pcie_wr_conf,
-};
-
-static int __init oxnas_pcie_setup(int nr, struct pci_sys_data *sys)
-{
- struct oxnas_pcie *pcie = sys_to_pcie(sys);
-
- pci_add_resource_offset(&sys->resources, &pcie->non_mem, sys->mem_offset);
- pci_add_resource_offset(&sys->resources, &pcie->pre_mem, sys->mem_offset);
- pci_add_resource_offset(&sys->resources, &pcie->io, sys->io_offset);
- pci_add_resource(&sys->resources, &pcie->busn);
- if (sys->busnr == 0) { /* default one */
- sys->busnr = pcie->busn.start;
- }
- /* do not use devm_ioremap_resource, it does not like cfg resource */
- pcie->cfgbase = devm_ioremap(&pcie->pdev->dev, pcie->cfg.start,
- resource_size(&pcie->cfg));
- if (!pcie->cfgbase)
- return -ENOMEM;
-
- oxnas_pcie_setup_hw(pcie);
-
- return 1;
-}
-
-static void __init oxnas_pcie_enable(struct device *dev, struct oxnas_pcie *pcie)
-{
- struct hw_pci hw;
- int i;
-
- memset(&hw, 0, sizeof(hw));
- for (i = 0; i < NUM_CONTROLLERS; i++)
- pcie->private_data[i] = pcie;
-
- hw.nr_controllers = NUM_CONTROLLERS;
-/* I think use stack pointer is a bad idea though it is valid in this case */
- hw.private_data = pcie->private_data;
- hw.setup = oxnas_pcie_setup;
- hw.map_irq = of_irq_parse_and_map_pci;
- hw.ops = &oxnas_pcie_ops;
-
- /* pass dev to maintain of tree, interrupt mapping rely on this */
- pci_common_init_dev(dev, &hw);
-}
-
-void oxnas_pcie_init_shared_hw(struct platform_device *pdev,
- void __iomem *phybase)
-{
- struct reset_control *rstc;
- int ret;
-
- /* generate clocks from HCSL buffers, shared parts */
- writel(HCSL_BIAS_ON|HCSL_PCIE_EN, SYS_CTRL_HCSL_CTRL);
-
- /* Ensure PCIe PHY is properly reset */
- rstc = reset_control_get(&pdev->dev, "phy");
- if (IS_ERR(rstc)) {
- ret = PTR_ERR(rstc);
- } else {
- ret = reset_control_reset(rstc);
- reset_control_put(rstc);
- }
-
- if (ret) {
- dev_err(&pdev->dev, "phy reset failed %d\n", ret);
- return;
- }
-
- /* Enable PCIe Pre-Emphasis: What these value means? */
-
- writel(ADDR_VAL(0x0014), phybase + PHY_ADDR);
- writel(DATA_VAL(0xce10) | CAP_DATA, phybase + PHY_DATA);
- writel(DATA_VAL(0xce10) | WRITE_EN, phybase + PHY_DATA);
-
- writel(ADDR_VAL(0x2004), phybase + PHY_ADDR);
- writel(DATA_VAL(0x82c7) | CAP_DATA, phybase + PHY_DATA);
- writel(DATA_VAL(0x82c7) | WRITE_EN, phybase + PHY_DATA);
-}
-
-static int oxnas_pcie_shared_init(struct platform_device *pdev)
-{
- if (++pcie_shared.refcount == 1) {
- /* we are the first */
- struct device_node *np = pdev->dev.of_node;
- void __iomem *phy = of_iomap(np, 2);
- if (!phy) {
- --pcie_shared.refcount;
- return -ENOMEM;
- }
- oxnas_pcie_init_shared_hw(pdev, phy);
- iounmap(phy);
- return 0;
- } else {
- return 0;
- }
-}
-
-#if 0
-/* maybe we will call it when enter low power state */
-static void oxnas_pcie_shared_deinit(struct platform_device *pdev)
-{
- if (--pcie_shared.refcount == 0) {
- /* no cleanup needed */;
- }
-}
-#endif
-
-static int __init
-oxnas_pcie_map_registers(struct platform_device *pdev,
- struct device_node *np,
- struct oxnas_pcie *pcie)
-{
- struct resource regs;
- int ret = 0;
- u32 outbound_ctrl_offset;
- u32 pcie_ctrl_offset;
-
- /* 2 is reserved for shared phy */
- ret = of_address_to_resource(np, 0, &regs);
- if (ret)
- return -EINVAL;
- pcie->base = devm_ioremap_resource(&pdev->dev, &regs);
- if (!pcie->base)
- return -ENOMEM;
-
- ret = of_address_to_resource(np, 1, &regs);
- if (ret)
- return -EINVAL;
- pcie->inbound = devm_ioremap_resource(&pdev->dev, &regs);
- if (!pcie->inbound)
- return -ENOMEM;
-
-
- if (of_property_read_u32(np, "plxtech,pcie-outbound-offset",
- &outbound_ctrl_offset))
- return -EINVAL;
- /* SYSCRTL is shared by too many drivers, so is mapped by board file */
- pcie->outbound = IOMEM(OXNAS_SYSCRTL_BASE_VA + outbound_ctrl_offset);
-
- if (of_property_read_u32(np, "plxtech,pcie-ctrl-offset",
- &pcie_ctrl_offset))
- return -EINVAL;
- pcie->pcie_ctrl = IOMEM(OXNAS_SYSCRTL_BASE_VA + pcie_ctrl_offset);
-
- return 0;
-}
-
-static int __init oxnas_pcie_init_res(struct platform_device *pdev,
- struct oxnas_pcie *pcie,
- struct device_node *np)
-{
- struct of_pci_range range;
- struct of_pci_range_parser parser;
- int ret;
-
- if (of_pci_range_parser_init(&parser, np))
- return -EINVAL;
-
- /* Get the I/O and memory ranges from DT */
- for_each_of_pci_range(&parser, &range) {
-
- unsigned long restype = range.flags & IORESOURCE_TYPE_BITS;
- if (restype == IORESOURCE_IO) {
- of_pci_range_to_resource(&range, np, &pcie->io);
- pcie->io.name = "I/O";
- }
- if (restype == IORESOURCE_MEM) {
- if (range.flags & IORESOURCE_PREFETCH) {
- of_pci_range_to_resource(&range, np, &pcie->pre_mem);
- pcie->pre_mem.name = "PRE MEM";
- } else {
- of_pci_range_to_resource(&range, np, &pcie->non_mem);
- pcie->non_mem.name = "NON MEM";
- }
-
- }
- if (restype == 0)
- of_pci_range_to_resource(&range, np, &pcie->cfg);
- }
-
- /* Get the bus range */
- ret = of_pci_parse_bus_range(np, &pcie->busn);
-
- if (ret) {
- dev_err(&pdev->dev, "failed to parse bus-range property: %d\n",
- ret);
- return ret;
- }
-
- pcie->card_reset = of_get_gpio(np, 0);
- if (pcie->card_reset < 0)
- dev_info(&pdev->dev, "card reset gpio pin not exists\n");
-
- if (of_property_read_u32(np, "plxtech,pcie-hcsl-bit", &pcie->hcsl_en))
- return -EINVAL;
-
- pcie->clk = of_clk_get_by_name(np, "pcie");
- if (IS_ERR(pcie->clk)) {
- return PTR_ERR(pcie->clk);
- }
-
- pcie->busclk = of_clk_get_by_name(np, "busclk");
- if (IS_ERR(pcie->busclk)) {
- clk_put(pcie->clk);
- return PTR_ERR(pcie->busclk);
- }
-
- return 0;
-}
-
-static void oxnas_pcie_init_hw(struct platform_device *pdev,
- struct oxnas_pcie *pcie)
-{
- u32 version_id;
- int ret;
-
- clk_prepare_enable(pcie->busclk);
-
- /* reset PCIe cards use hard-wired gpio pin */
- if (pcie->card_reset >= 0 &&
- !gpio_direction_output(pcie->card_reset, 0)) {
- wmb();
- mdelay(10);
- /* must tri-state the pin to pull it up */
- gpio_direction_input(pcie->card_reset);
- wmb();
- mdelay(100);
- }
-
- oxnas_register_set_mask(SYS_CTRL_HCSL_CTRL, BIT(pcie->hcsl_en));
-
- /* core */
- ret = device_reset(&pdev->dev);
- if (ret) {
- dev_err(&pdev->dev, "core reset failed %d\n", ret);
- return;
- }
-
- /* Start PCIe core clocks */
- clk_prepare_enable(pcie->clk);
-
- version_id = readl_relaxed(pcie->base + PCI_CONFIG_VERSION_DEVICEID);
- dev_info(&pdev->dev, "PCIe version/deviceID 0x%x\n", version_id);
-
- if (version_id != VERSION_ID_MAGIC) {
- dev_info(&pdev->dev, "PCIe controller not found\n");
- pcie->haslink = 0;
- return;
- }
-
- /* allow entry to L23 state */
- oxnas_register_set_mask(pcie->pcie_ctrl, PCIE_READY_ENTR_L23);
-
- /* Set PCIe core into RootCore mode */
- oxnas_register_value_mask(pcie->pcie_ctrl, PCIE_DEVICE_TYPE_MASK,
- PCIE_DEVICE_TYPE_ROOT);
- wmb();
-
- /* Bring up the PCI core */
- oxnas_register_set_mask(pcie->pcie_ctrl, PCIE_LTSSM);
- wmb();
-}
-
-static int __init oxnas_pcie_probe(struct platform_device *pdev)
-{
- struct oxnas_pcie *pcie;
- struct device_node *np = pdev->dev.of_node;
- int ret;
-
- pcie = devm_kzalloc(&pdev->dev, sizeof(struct oxnas_pcie),
- GFP_KERNEL);
- if (!pcie)
- return -ENOMEM;
-
- pcie->pdev = pdev;
- pcie->haslink = 1;
- spin_lock_init(&pcie->lock);
-
- ret = oxnas_pcie_init_res(pdev, pcie, np);
- if (ret)
- return ret;
- if (pcie->card_reset >= 0) {
- ret = gpio_request_one(pcie->card_reset, GPIOF_DIR_IN,
- dev_name(&pdev->dev));
- if (ret) {
- dev_err(&pdev->dev, "cannot request gpio pin %d\n",
- pcie->card_reset);
- return ret;
- }
- }
-
- ret = oxnas_pcie_map_registers(pdev, np, pcie);
- if (ret) {
- dev_err(&pdev->dev, "cannot map registers\n");
- goto err_free_gpio;
- }
-
- ret = oxnas_pcie_shared_init(pdev);
- if (ret)
- goto err_free_gpio;
-
- /* if hw not found, haslink cleared */
- oxnas_pcie_init_hw(pdev, pcie);
-
- if (pcie->haslink && oxnas_pcie_link_up(pcie)) {
- pcie->haslink = 1;
- dev_info(&pdev->dev, "link up\n");
- } else {
- pcie->haslink = 0;
- dev_info(&pdev->dev, "link down\n");
- }
- /* should we register our controller even when pcie->haslink is 0 ? */
- /* register the controller with framework */
- oxnas_pcie_enable(&pdev->dev, pcie);
-
- return 0;
-
-err_free_gpio:
- if (pcie->card_reset)
- gpio_free(pcie->card_reset);
-
- return ret;
-}
-
-static const struct of_device_id oxnas_pcie_of_match_table[] = {
- { .compatible = "plxtech,nas782x-pcie", },
- {},
-};
-MODULE_DEVICE_TABLE(of, oxnas_pcie_of_match_table);
-
-static struct platform_driver oxnas_pcie_driver = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "oxnas-pcie",
- .of_match_table =
- of_match_ptr(oxnas_pcie_of_match_table),
- },
-};
-
-static int __init oxnas_pcie_init(void)
-{
- return platform_driver_probe(&oxnas_pcie_driver,
- oxnas_pcie_probe);
-}
-
-subsys_initcall(oxnas_pcie_init);
-
-MODULE_AUTHOR("Ma Haijun <mahaijuns@gmail.com>");
-MODULE_DESCRIPTION("NAS782x PCIe driver");
-MODULE_LICENSE("GPLv2");