BB: remove some targets that are broken or have the wrong kernel version

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@41876 3c298f89-4303-0410-b956-a3cf2f4a3e73

39 files changed, 0 insertions, 13799 deletions

diff --git a/target/linux/omap24xx/Makefile b/target/linux/omap24xx/Makefile
deleted file mode 100644
index f8cd3c5115..0000000000
--- a/target/linux/omap24xx/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Copyright (C) 2010-2011 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-ARCH:=arm
-BOARD:=omap24xx
-BOARDNAME:=TI OMAP24xx
-MAINTAINER:=Michael Buesch <m@bues.ch>
-FEATURES:=targz squashfs jffs2_nand usb usbgadget display gpio audio broken
-CPU_TYPE:=arm1136j-s
-
-LINUX_VERSION:=3.3.8
-
-define Target/Description
-	TI OMAP-24xx
-endef
-
-KERNELNAME:="zImage"
-
-include $(INCLUDE_DIR)/target.mk
-
-$(eval $(call BuildTarget))
diff --git a/target/linux/omap24xx/base-files/etc/config/fstab b/target/linux/omap24xx/base-files/etc/config/fstab
deleted file mode 100644
index 0910277b26..0000000000
--- a/target/linux/omap24xx/base-files/etc/config/fstab
+++ /dev/null
@@ -1,13 +0,0 @@
-config mount
-	option target   /maemo/initfs
-	option device   /dev/mtdblock3
-	option fstype   jffs2
-	option options  rw,noatime
-	option enabled  0
-
-config mount
-	option target   /maemo/rootfs
-	option device   /dev/mtdblock4
-	option fstype   jffs2
-	option options  rw,noatime
-	option enabled  0
diff --git a/target/linux/omap24xx/base-files/etc/config/network b/target/linux/omap24xx/base-files/etc/config/network
deleted file mode 100644
index 8207443f39..0000000000
--- a/target/linux/omap24xx/base-files/etc/config/network
+++ /dev/null
@@ -1,15 +0,0 @@
-config interface loopback
-	option ifname	lo
-	option proto	static
-	option netmask	255.0.0.0
-
-config interface lan
-	option proto	dhcp
-	option netmask	255.255.255.0
-
-config interface usb
-	option ifname	usb0
-	option proto	static
-	option ipaddr	192.168.168.168
-	option netmask	255.255.255.0
-	option ip6addr	fe80::810:1
diff --git a/target/linux/omap24xx/base-files/etc/config/wireless b/target/linux/omap24xx/base-files/etc/config/wireless
deleted file mode 100644
index b640ce6c26..0000000000
--- a/target/linux/omap24xx/base-files/etc/config/wireless
+++ /dev/null
@@ -1,20 +0,0 @@
-config wifi-device  radio0
-	option type     mac80211
-	option phy	phy0
-	option channel  auto
-	# TODO: CHANGE THE MAC-ADDRESS:
-	option macaddr	00:11:22:33:44:55
-	option hwmode	11g
-#	option country	DE
-
-	# REMOVE THIS LINE TO ENABLE WIFI:
-	option disabled 1
-
-config wifi-iface
-	option device   radio0
-	option powersave 1
-	option network  lan
-	option mode     sta
-	option ssid     OpenWrt
-#	option encryption psk2
-#	option key	"foobar"
diff --git a/target/linux/omap24xx/base-files/etc/hotplug.d/firmware/10-bme-pmm-image b/target/linux/omap24xx/base-files/etc/hotplug.d/firmware/10-bme-pmm-image
deleted file mode 100644
index d03c9dee03..0000000000
--- a/target/linux/omap24xx/base-files/etc/hotplug.d/firmware/10-bme-pmm-image
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/bin/sh
-
-n810_cal_bme_pmm_extract() {
-	[ -x /usr/bin/calvaria ] && {
-		/usr/bin/calvaria -p -n bme -i last /dev/mtdblock1 >/lib/firmware/n810-cal-bme-pmm.fw ||\
-			echo "CAL-BME extract: Failed to extract blob"
-	}
-}
-
-[ "$FIRMWARE" = "n810-cal-bme-pmm.fw" ] && {
-	[ -z "$(grep -e 'Nokia N810' /proc/cpuinfo)" ] || {
-		[ -e /lib/firmware/n810-cal-bme-pmm.fw ] ||\
-			n810_cal_bme_pmm_extract
-	}
-}
diff --git a/target/linux/omap24xx/base-files/etc/hotplug.d/firmware/20-p54spi-eeprom b/target/linux/omap24xx/base-files/etc/hotplug.d/firmware/20-p54spi-eeprom
deleted file mode 100644
index ca92f80bea..0000000000
--- a/target/linux/omap24xx/base-files/etc/hotplug.d/firmware/20-p54spi-eeprom
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/bin/sh
-
-p54spi_eeprom_clean() {
-	rm -f /tmp/wlan-iq-align /tmp/wlan-tx-gen2
-}
-
-p54spi_eeprom_die() {
-	echo "$*"
-	p54spi_eeprom_clean
-	exit 1
-}
-
-p54spi_eeprom_extract() {
-	[ -x /usr/bin/calvaria -a -x /usr/bin/cal2p54 ] && {
-		/usr/bin/calvaria -p -n wlan-iq-align -i last /dev/mtdblock1 >/tmp/wlan-iq-align ||\
-			p54spi_eeprom_die "p54spi EEPROM: Failed to extract wlan-iq-align"
-		/usr/bin/calvaria -p -n wlan-tx-gen2 -i last /dev/mtdblock1 >/tmp/wlan-tx-gen2 ||\
-			p54spi_eeprom_die "p54spi EEPROM: Failed to extract wlan-tx-gen2"
-		/usr/bin/cal2p54 /tmp/wlan-tx-gen2 /tmp/wlan-iq-align >/lib/firmware/3826.eeprom ||\
-			p54spi_eeprom_die "p54spi EEPROM: Failed to generate EEPROM"
-		p54spi_eeprom_clean
-	}
-}
-
-[ "$FIRMWARE" = "3826.eeprom" ] && {
-	[ -z "$(grep -e 'Nokia N810' /proc/cpuinfo)" ] || {
-		[ -e /lib/firmware/3826.eeprom ] ||\
-			p54spi_eeprom_extract
-	}
-}
diff --git a/target/linux/omap24xx/base-files/etc/init.d/watchdog b/target/linux/omap24xx/base-files/etc/init.d/watchdog
deleted file mode 100755
index 0d042c64ea..0000000000
--- a/target/linux/omap24xx/base-files/etc/init.d/watchdog
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2008-2010 OpenWrt.org
-
-START=25
-
-start() {
-	[ -c /dev/watchdog -a -x /sbin/watchdog ] || {
-		echo "WARNING: Watchdog not available. System will reboot soon!"
-		return 1
-	}
-	/sbin/watchdog -T 63 -t 50 /dev/watchdog
-	[ -x /usr/bin/schedtool ] && /usr/bin/schedtool -R -p 60 -n -20 $(pidof watchdog)
-}
-
-stop() {
-	killall -q watchdog
-}
diff --git a/target/linux/omap24xx/base-files/etc/inittab b/target/linux/omap24xx/base-files/etc/inittab
deleted file mode 100644
index 1360dc9e28..0000000000
--- a/target/linux/omap24xx/base-files/etc/inittab
+++ /dev/null
@@ -1,5 +0,0 @@
-::sysinit:/etc/init.d/rcS S boot
-::shutdown:/etc/init.d/rcS K shutdown
-tts/0::askfirst:/bin/ash --login
-ttyO2::askfirst:/bin/ash --login
-tty1::askfirst:/bin/ash --login
diff --git a/target/linux/omap24xx/base-files/etc/pointercal b/target/linux/omap24xx/base-files/etc/pointercal
deleted file mode 100644
index eba5ab6aa6..0000000000
--- a/target/linux/omap24xx/base-files/etc/pointercal
+++ /dev/null
@@ -1 +0,0 @@
-14706 -12 -3754952 36 -9898 35656000 65536
diff --git a/target/linux/omap24xx/base-files/lib/firmware/bc4fw.bin b/target/linux/omap24xx/base-files/lib/firmware/bc4fw.bin
deleted file mode 100644
index b7335db148..0000000000
--- a/target/linux/omap24xx/base-files/lib/firmware/bc4fw.bin
+++ /dev/null
diff --git a/target/linux/omap24xx/config-3.3 b/target/linux/omap24xx/config-3.3
deleted file mode 100644
index f3d45f5cfc..0000000000
--- a/target/linux/omap24xx/config-3.3
+++ /dev/null
@@ -1,685 +0,0 @@
-# CONFIG_AD2S1200 is not set
-# CONFIG_AD2S1210 is not set
-# CONFIG_AD2S90 is not set
-# CONFIG_AD5064 is not set
-# CONFIG_AD5360 is not set
-# CONFIG_AD5380 is not set
-# CONFIG_AD5421 is not set
-# CONFIG_AD5446 is not set
-# CONFIG_AD5504 is not set
-# CONFIG_AD5624R_SPI is not set
-# CONFIG_AD5686 is not set
-# CONFIG_AD5764 is not set
-# CONFIG_AD5791 is not set
-# CONFIG_AD5930 is not set
-# CONFIG_AD5933 is not set
-# CONFIG_AD7150 is not set
-# CONFIG_AD7152 is not set
-# CONFIG_AD7192 is not set
-# CONFIG_AD7280 is not set
-# CONFIG_AD7291 is not set
-# CONFIG_AD7298 is not set
-# CONFIG_AD7476 is not set
-# CONFIG_AD7606 is not set
-# CONFIG_AD7746 is not set
-# CONFIG_AD7780 is not set
-# CONFIG_AD7793 is not set
-# CONFIG_AD7816 is not set
-# CONFIG_AD7887 is not set
-# CONFIG_AD799X is not set
-# CONFIG_AD9832 is not set
-# CONFIG_AD9834 is not set
-# CONFIG_AD9850 is not set
-# CONFIG_AD9852 is not set
-# CONFIG_AD9910 is not set
-# CONFIG_AD9951 is not set
-# CONFIG_ADE7753 is not set
-# CONFIG_ADE7754 is not set
-# CONFIG_ADE7758 is not set
-# CONFIG_ADE7759 is not set
-# CONFIG_ADE7854 is not set
-# CONFIG_ADIS16060 is not set
-# CONFIG_ADIS16080 is not set
-# CONFIG_ADIS16130 is not set
-CONFIG_ADIS16201=m
-CONFIG_ADIS16203=m
-CONFIG_ADIS16204=m
-# CONFIG_ADIS16209 is not set
-# CONFIG_ADIS16220 is not set
-# CONFIG_ADIS16240 is not set
-# CONFIG_ADIS16260 is not set
-# CONFIG_ADIS16400 is not set
-# CONFIG_ADT7310 is not set
-# CONFIG_ADT7316 is not set
-# CONFIG_ADT7410 is not set
-# CONFIG_ADXRS450 is not set
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_APM_EMULATION=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_OMAP1 is not set
-CONFIG_ARCH_OMAP2=y
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
-# CONFIG_ARCH_OMAP3 is not set
-# CONFIG_ARCH_OMAP4 is not set
-CONFIG_ARCH_OMAP_OTG=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
-CONFIG_ARM=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_ERRATA_364296=y
-CONFIG_ARM_ERRATA_411920=y
-# CONFIG_ARM_EXYNOS4210_CPUFREQ is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_NR_BANKS=8
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_ARPD is not set
-CONFIG_ATAGS_PROC=y
-CONFIG_BINFMT_MISC=y
-# CONFIG_BLK_CGROUP is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_SD=y
-CONFIG_BRIDGE=m
-CONFIG_BT=m
-# CONFIG_BT_HCIH4P is not set
-CONFIG_BT_HCIUART=m
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CBUS=y
-CONFIG_CBUS_RETU=y
-CONFIG_CBUS_RETU_HEADSET=y
-CONFIG_CBUS_RETU_POWERBUTTON=y
-CONFIG_CBUS_RETU_WDT=y
-CONFIG_CBUS_TAHVO=y
-CONFIG_CBUS_TAHVO_USB=m
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_CFS_BANDWIDTH is not set
-CONFIG_CGROUPS=y
-# CONFIG_CGROUP_CPUACCT is not set
-# CONFIG_CGROUP_DEBUG is not set
-# CONFIG_CGROUP_DEVICE is not set
-# CONFIG_CGROUP_FREEZER is not set
-CONFIG_CGROUP_SCHED=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CMDLINE="root=/dev/mmcblk0p1 rootfstype=ext4,ext3,ext2,squashfs,jffs2 console=tty0 console=ttyO2,115200n8 earlyprintk"
-CONFIG_CMDLINE_FORCE=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-# CONFIG_CPUSETS is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_USE_DOMAINS=y
-CONFIG_CPU_V6=y
-CONFIG_CRC16=y
-CONFIG_CRC7=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_DEV_OMAP_AES=y
-CONFIG_CRYPTO_DEV_OMAP_SHAM=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_PCOMP2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_USER is not set
-CONFIG_DEFAULT_CFQ=y
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_DEVKMEM=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_DNOTIFY=y
-CONFIG_DNS_RESOLVER=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXPORTFS=m
-CONFIG_EXT4_FS=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAT_FS=y
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-CONFIG_FB_OMAP_LCDC_BLIZZARD=y
-CONFIG_FB_OMAP_LCDC_EXTERNAL=y
-# CONFIG_FB_OMAP_LCDC_HWA742 is not set
-CONFIG_FB_OMAP_LCD_MIPID=y
-# CONFIG_FB_OMAP_MANUAL_UPDATE is not set
-# CONFIG_FB_WMT_GE_ROPS is not set
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_FONTS=y
-# CONFIG_FONT_10x18 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_SUN8x16 is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FREEZER=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ACL=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_AOUT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MTD_OTP=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SCHED_CLOCK=y
-CONFIG_HAVE_SPARSE_IRQ=y
-CONFIG_HID=y
-CONFIG_HID_APPLE=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HWMON=m
-CONFIG_HW_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OMAP=y
-CONFIG_HZ=128
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_OMAP=y
-CONFIG_IIO=y
-# CONFIG_IIO_BUFFER is not set
-# CONFIG_IIO_SIMPLE_DUMMY is not set
-# CONFIG_IIO_TRIGGER is not set
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-CONFIG_INET_TUNNEL=m
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-CONFIG_INPUT=y
-# CONFIG_INPUT_APMPOWER is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-CONFIG_INPUT_TABLET=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IPV6=y
-CONFIG_IPV6_MIP6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_SIT=m
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_MROUTE is not set
-CONFIG_IR_LIRC_CODEC=m
-CONFIG_IR_MCE_KBD_DECODER=m
-CONFIG_IR_RC5_SZ_DECODER=m
-# CONFIG_IR_REDRAT3 is not set
-CONFIG_IR_SANYO_DECODER=m
-# CONFIG_ISDN is not set
-# CONFIG_ISP1301_OMAP is not set
-CONFIG_JBD2=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JOYSTICK_A3D is not set
-# CONFIG_JOYSTICK_ADI is not set
-# CONFIG_JOYSTICK_ANALOG is not set
-# CONFIG_JOYSTICK_AS5011 is not set
-# CONFIG_JOYSTICK_COBRA is not set
-# CONFIG_JOYSTICK_GF2K is not set
-# CONFIG_JOYSTICK_GRIP is not set
-# CONFIG_JOYSTICK_GRIP_MP is not set
-# CONFIG_JOYSTICK_GUILLEMOT is not set
-# CONFIG_JOYSTICK_IFORCE is not set
-# CONFIG_JOYSTICK_INTERACT is not set
-# CONFIG_JOYSTICK_JOYDUMP is not set
-# CONFIG_JOYSTICK_MAGELLAN is not set
-# CONFIG_JOYSTICK_SIDEWINDER is not set
-# CONFIG_JOYSTICK_SPACEBALL is not set
-# CONFIG_JOYSTICK_SPACEORB is not set
-# CONFIG_JOYSTICK_STINGER is not set
-# CONFIG_JOYSTICK_TMDC is not set
-# CONFIG_JOYSTICK_TWIDJOY is not set
-# CONFIG_JOYSTICK_WARRIOR is not set
-# CONFIG_JOYSTICK_XPAD is not set
-# CONFIG_JOYSTICK_ZHENHUA is not set
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KEXEC=y
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_KEYBOARD_LM8323=y
-# CONFIG_KEYBOARD_OMAP is not set
-CONFIG_KEYBOARD_TSC2301=y
-CONFIG_KEYS=y
-CONFIG_KTIME_SCALAR=y
-# CONFIG_KXSD9 is not set
-# CONFIG_LEDS is not set
-# CONFIG_LEDS_REGULATOR is not set
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LIRC=m
-# CONFIG_LIS3L02DQ is not set
-CONFIG_LLC=m
-CONFIG_LOCKD=m
-CONFIG_LOG_BUF_SHIFT=18
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACH_NOKIA_N800=y
-CONFIG_MACH_NOKIA_N810=y
-CONFIG_MACH_NOKIA_N810_WIMAX=y
-CONFIG_MACH_NOKIA_N8X0=y
-CONFIG_MACH_OMAP2_TUSB6010=y
-# CONFIG_MACH_OMAP_APOLLON is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-# CONFIG_MACH_OMAP_H4 is not set
-CONFIG_MACVLAN=m
-CONFIG_MAC_PARTITION=y
-# CONFIG_MAX1363 is not set
-# CONFIG_MAX517 is not set
-CONFIG_MEDIA_ATTACH=y
-CONFIG_MEDIA_SUPPORT=m
-CONFIG_MEDIA_TUNER=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA18271=m
-CONFIG_MEDIA_TUNER_TDA827X=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC4000=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MENELAUS=y
-# CONFIG_MFD_T7L66XB is not set
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_OMAP=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SPI=y
-CONFIG_MMC_UNSAFE_RESUME=y
-# CONFIG_MOUSE_BCM5974 is not set
-CONFIG_MOUSE_PS2=m
-# CONFIG_MOUSE_PS2_ALPS is not set
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
-# CONFIG_MOUSE_PS2_SYNAPTICS is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_PS2_TRACKPOINT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MSDOS_FS=y
-CONFIG_MTD_BLOCK2MTD=y
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
-CONFIG_MTD_ONENAND_OMAP2=y
-CONFIG_MTD_ONENAND_OTP=y
-# CONFIG_MTD_ONENAND_SIM is not set
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ROOTFS_ROOT_DEV is not set
-# CONFIG_MTD_ROOTFS_SPLIT is not set
-CONFIG_MULTI_IRQ_HANDLER=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_N810BM=m
-CONFIG_NAMESPACES=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-# CONFIG_NETPRIO_CGROUP is not set
-# CONFIG_NET_NS is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_FAULT_INJECTION is not set
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_USE_KERNEL_DNS=y
-# CONFIG_NFS_USE_LEGACY_DNS is not set
-# CONFIG_NFS_USE_NEW_IDMAPPER is not set
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_V4_1=y
-CONFIG_NLS=y
-CONFIG_NOP_USB_XCEIV=m
-CONFIG_NO_HZ=y
-# CONFIG_OMAP2_DSS is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
-CONFIG_OMAP_BOOT_REASON=y
-CONFIG_OMAP_BOOT_TAG=y
-CONFIG_OMAP_COMPONENT_VERSION=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_GPIO_SWITCH=y
-CONFIG_OMAP_MBOX_FWK=y
-CONFIG_OMAP_MBOX_KFIFO_SIZE=256
-CONFIG_OMAP_MCBSP=y
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_PACKAGE_ZAC=y
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_WATCHDOG is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PCI_SYSCALL is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_PM_SLEEP=y
-CONFIG_PNFS_FILE_LAYOUT=m
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_MPPE=m
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_COUNT=y
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_RCU=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_RCU_BOOST=y
-CONFIG_RCU_BOOST_DELAY=500
-CONFIG_RCU_BOOST_PRIO=1
-# CONFIG_RC_ATI_REMOTE is not set
-CONFIG_RC_CORE=m
-# CONFIG_RC_LOOPBACK is not set
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=m
-CONFIG_REGMAP_SPI=m
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_AD5398 is not set
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
-# CONFIG_REGULATOR_ISL6271A is not set
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_LP3972 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
-# CONFIG_REGULATOR_MAX8952 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_REGULATOR_TPS6524X is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_RESOURCE_COUNTERS is not set
-# CONFIG_RFKILL_REGULATOR is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_SCHED_AUTOGROUP=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SENSORS_AK8975 is not set
-# CONFIG_SENSORS_HMC5843 is not set
-# CONFIG_SENSORS_ISL29018 is not set
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_TSL2563=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_OMAP=y
-CONFIG_SERIAL_OMAP_CONSOLE=y
-CONFIG_SERIO=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SLAB is not set
-CONFIG_SLHC=m
-CONFIG_SLUB=y
-CONFIG_SND=m
-CONFIG_SND_ARM=y
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_JACK=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_OMAP_SOC=m
-CONFIG_SND_OMAP_SOC_MCBSP=m
-CONFIG_SND_OMAP_SOC_N810=m
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-CONFIG_SND_PCM=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-CONFIG_SND_SOC=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_I2C_AND_SPI=m
-CONFIG_SND_SOC_TLV320AIC3X=m
-CONFIG_SND_SPI=y
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_TIMER=m
-CONFIG_SOC_OMAP2420=y
-# CONFIG_SOC_OMAP2430 is not set
-CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPEAKUP=m
-CONFIG_SPEAKUP_SYNTH_ACNTPC=m
-CONFIG_SPEAKUP_SYNTH_ACNTSA=m
-CONFIG_SPEAKUP_SYNTH_APOLLO=m
-CONFIG_SPEAKUP_SYNTH_AUDPTR=m
-CONFIG_SPEAKUP_SYNTH_BNS=m
-CONFIG_SPEAKUP_SYNTH_DECEXT=m
-CONFIG_SPEAKUP_SYNTH_DECPC=m
-CONFIG_SPEAKUP_SYNTH_DECTLK=m
-CONFIG_SPEAKUP_SYNTH_DTLK=m
-CONFIG_SPEAKUP_SYNTH_DUMMY=m
-CONFIG_SPEAKUP_SYNTH_KEYPC=m
-CONFIG_SPEAKUP_SYNTH_LTLK=m
-CONFIG_SPEAKUP_SYNTH_SOFT=m
-CONFIG_SPEAKUP_SYNTH_SPKOUT=m
-CONFIG_SPEAKUP_SYNTH_TXPRT=m
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_SPI_TSC2301=y
-# CONFIG_SPI_TSC2301_AUDIO is not set
-CONFIG_STP=m
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_BACKCHANNEL=y
-CONFIG_SUNRPC_GSS=m
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_SYN_COOKIES is not set
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_TABLET_USB_ACECAD is not set
-# CONFIG_TABLET_USB_AIPTEK is not set
-# CONFIG_TABLET_USB_GTCO is not set
-# CONFIG_TABLET_USB_HANWANG is not set
-# CONFIG_TABLET_USB_KBTAB is not set
-# CONFIG_TABLET_USB_WACOM is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TINY_PREEMPT_RCU=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
-# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_BU21013 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EGALAX is not set
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-# CONFIG_TOUCHSCREEN_MAX11801 is not set
-# CONFIG_TOUCHSCREEN_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_ST1232 is not set
-CONFIG_TOUCHSCREEN_TSC2005=y
-CONFIG_TOUCHSCREEN_TSC2301=y
-# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
-# CONFIG_TSL2583 is not set
-CONFIG_TUN=m
-CONFIG_UACCESS_WITH_MEMCPY=y
-CONFIG_UID16=y
-CONFIG_USB=m
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_ARCH_HAS_XHCI is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_COMMON=m
-CONFIG_USB_ETH=m
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_ETH_RNDIS is not set
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DUALSPEED=y
-CONFIG_USB_GADGET_MUSB_HDRC=m
-CONFIG_USB_GADGET_VBUS_DRAW=100
-CONFIG_USB_GSPCA=m
-CONFIG_USB_G_NCM=m
-CONFIG_USB_HID=m
-# CONFIG_USB_MUSB_AM35X is not set
-CONFIG_USB_MUSB_HDRC=m
-# CONFIG_USB_MUSB_OMAP2PLUS is not set
-CONFIG_USB_MUSB_TUSB6010=m
-CONFIG_USB_NET_CDC_NCM=m
-# CONFIG_USB_OMAP is not set
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_PWC is not set
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_TUSB_OMAP_DMA=y
-CONFIG_USB_USBNET=m
-# CONFIG_USER_NS is not set
-# CONFIG_V4L_PLATFORM_DRIVERS is not set
-CONFIG_V4L_USB_DRIVERS=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VFAT_FS=y
-CONFIG_VFP=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_CPIA2 is not set
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_IR_I2C=m
-CONFIG_VIDEO_MEDIA=m
-CONFIG_VIDEO_TCM825X=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VLAN_8021Q=m
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_WATCHDOG_NOWAYOUT=y
-# CONFIG_WEXT_PRIV is not set
-# CONFIG_WEXT_SPY is not set
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_BCJ=y
-# CONFIG_ZBOOT_ROM is not set
-CONFIG_ZBOOT_ROM_BSS=0x10200000
-CONFIG_ZBOOT_ROM_TEXT=0x10C08000
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/omap24xx/image/Makefile b/target/linux/omap24xx/image/Makefile
deleted file mode 100644
index 96dc854231..0000000000
--- a/target/linux/omap24xx/image/Makefile
+++ /dev/null
@@ -1,27 +0,0 @@
-# 
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-NAND_BLOCKSIZE=2048:128k
-
-define Image/BuildKernel
-	$(CP) $(KDIR)/zImage $(BIN_DIR)/$(IMG_PREFIX)-zImage
-	chmod 0644 $(BIN_DIR)/$(IMG_PREFIX)-zImage
-endef
-
-define Image/Build/squashfs
-    $(call prepare_generic_squashfs,$(BIN_DIR)/$(IMG_PREFIX)-root.$(1))
-endef
-
-define Image/Build
-	$(CP) $(KDIR)/root.$(1) $(BIN_DIR)/$(IMG_PREFIX)-root.$(1)
-	$(call Image/Build/$(1),$(1))
-endef
-
-
-$(eval $(call BuildImage))
diff --git a/target/linux/omap24xx/modules.mk b/target/linux/omap24xx/modules.mk
deleted file mode 100644
index 6de8e86c1d..0000000000
--- a/target/linux/omap24xx/modules.mk
+++ /dev/null
@@ -1,83 +0,0 @@
-#
-# Copyright (C) 2012 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define KernelPackage/sound-soc-omap
-  TITLE:=OMAP SoC sound support
-  KCONFIG:= \
-	CONFIG_SND_OMAP_SOC
-  FILES:=$(LINUX_DIR)/sound/soc/omap/snd-soc-omap.ko
-  AUTOLOAD:=$(call AutoLoad,60,snd-soc-omap)
-  DEPENDS:=@TARGET_omap24xx +kmod-sound-soc-core
-  $(call AddDepends/sound)
-endef
-
-$(eval $(call KernelPackage,sound-soc-omap))
-
-
-define KernelPackage/sound-soc-omap-mcbsp
-  TITLE:=OMAP SoC MCBSP support
-  KCONFIG:= \
-	CONFIG_SND_OMAP_SOC_MCBSP
-  FILES:=$(LINUX_DIR)/sound/soc/omap/snd-soc-omap-mcbsp.ko
-  AUTOLOAD:=$(call AutoLoad,61,snd-soc-omap-mcbsp)
-  DEPENDS:=@TARGET_omap24xx +kmod-sound-soc-omap
-  $(call AddDepends/sound)
-endef
-
-$(eval $(call KernelPackage,sound-soc-omap-mcbsp))
-
-
-define KernelPackage/sound-soc-n810
-  TITLE:=Nokia n810 SoC sound support
-  KCONFIG:= \
-	CONFIG_SND_OMAP_SOC_N810
-  FILES:= \
-	$(LINUX_DIR)/sound/soc/codecs/snd-soc-tlv320aic3x.ko \
-	$(LINUX_DIR)/sound/soc/omap/snd-soc-n810.ko
-  AUTOLOAD:=$(call AutoLoad,65,snd-soc-tlv320aic3x snd-soc-n810)
-  DEPENDS:=@TARGET_omap24xx +kmod-sound-soc-omap +kmod-sound-soc-omap-mcbsp
-  $(call AddDepends/sound)
-endef
-
-$(eval $(call KernelPackage,sound-soc-n810))
-
-
-define KernelPackage/n810bm
-  SUBMENU:=$(OTHER_MENU)
-  TITLE:=Nokia N810 battery management driver
-  DEPENDS:=@TARGET_omap24xx
-  KCONFIG:=CONFIG_N810BM
-  FILES:=$(LINUX_DIR)/drivers/cbus/n810bm.ko
-  AUTOLOAD:=$(call AutoLoad,01,n810bm)
-endef
-
-define KernelPackage/n810bm/description
-  Nokia N810 battery management driver.
-  Controls battery power management and battery charging.
-endef
-
-$(eval $(call KernelPackage,n810bm))
-
-
-define KernelPackage/usb-tahvo
-  TITLE:=Support for Tahvo (Nokia n810) USB
-  KCONFIG:= \
-	CONFIG_CBUS_TAHVO_USB \
-	CONFIG_CBUS_TAHVO_USB_HOST_BY_DEFAULT=n \
-	CONFIG_USB_OHCI_HCD_OMAP1=y \
-	CONFIG_USB_GADGET_DEBUG_FS=n
-  DEPENDS:=@TARGET_omap24xx +kmod-usb-musb-tusb6010
-  FILES:=$(LINUX_DIR)/drivers/cbus/tahvo-usb.ko
-  AUTOLOAD:=$(call AutoLoad,45,tahvo-usb)
-  $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-tahvo/description
-  Kernel support for Nokia n810 USB OHCI controller.
-endef
-
-$(eval $(call KernelPackage,usb-tahvo))
diff --git a/target/linux/omap24xx/patches-3.3/200-omap-platform.patch b/target/linux/omap24xx/patches-3.3/200-omap-platform.patch
deleted file mode 100644
index 6c215bdbed..0000000000
--- a/target/linux/omap24xx/patches-3.3/200-omap-platform.patch
+++ /dev/null
@@ -1,897 +0,0 @@
---- /dev/null
-+++ b/arch/arm/plat-omap/bootreason.c
-@@ -0,0 +1,79 @@
-+/*
-+ * linux/arch/arm/plat-omap/bootreason.c
-+ *
-+ * OMAP Bootreason passing
-+ *
-+ * Copyright (c) 2004 Nokia
-+ *
-+ * Written by David Weinehall <david.weinehall@nokia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
-+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
-+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
-+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/proc_fs.h>
-+#include <linux/errno.h>
-+#include <plat/board.h>
-+
-+static char boot_reason[16];
-+
-+static int omap_bootreason_read_proc(char *page, char **start, off_t off,
-+					 int count, int *eof, void *data)
-+{
-+	int len = 0;
-+
-+	len += sprintf(page + len, "%s\n", boot_reason);
-+
-+	*start = page + off;
-+
-+	if (len > off)
-+		len -= off;
-+	else
-+		len = 0;
-+
-+	return len < count ? len  : count;
-+}
-+
-+static int __init bootreason_init(void)
-+{
-+	const struct omap_boot_reason_config *cfg;
-+	int reason_valid = 0;
-+
-+	cfg = omap_get_config(OMAP_TAG_BOOT_REASON, struct omap_boot_reason_config);
-+	if (cfg != NULL) {
-+		strncpy(boot_reason, cfg->reason_str, sizeof(cfg->reason_str));
-+		boot_reason[sizeof(cfg->reason_str)] = 0;
-+		reason_valid = 1;
-+	} else {
-+		/* Read the boot reason from the OMAP registers */
-+	}
-+
-+	if (!reason_valid)
-+		return -ENOENT;
-+
-+	printk(KERN_INFO "Bootup reason: %s\n", boot_reason);
-+
-+	if (!create_proc_read_entry("bootreason", S_IRUGO, NULL,
-+					omap_bootreason_read_proc, NULL))
-+		return -ENOMEM;
-+
-+	return 0;
-+}
-+
-+late_initcall(bootreason_init);
---- a/arch/arm/plat-omap/common.c
-+++ b/arch/arm/plat-omap/common.c
-@@ -24,18 +24,90 @@
- 
- #include <plat/omap-secure.h>
- 
-+#include <asm/setup.h>
-+
- 
- #define NO_LENGTH_CHECK 0xffffffff
- 
- struct omap_board_config_kernel *omap_board_config __initdata;
- int omap_board_config_size;
- 
-+unsigned char omap_bootloader_tag[1024];
-+int omap_bootloader_tag_len;
-+
-+/* used by omap-smp.c and board-4430sdp.c */
-+void __iomem *gic_cpu_base_addr;
-+
-+#ifdef CONFIG_OMAP_BOOT_TAG
-+
-+static int __init parse_tag_omap(const struct tag *tag)
-+{
-+	u32 size = tag->hdr.size - (sizeof(tag->hdr) >> 2);
-+
-+        size <<= 2;
-+	if (size > sizeof(omap_bootloader_tag))
-+		return -1;
-+
-+	memcpy(omap_bootloader_tag, tag->u.omap.data, size);
-+	omap_bootloader_tag_len = size;
-+
-+        return 0;
-+}
-+
-+__tagtable(ATAG_BOARD, parse_tag_omap);
-+
-+#endif
-+
- static const void *__init get_config(u16 tag, size_t len,
- 		int skip, size_t *len_out)
- {
- 	struct omap_board_config_kernel *kinfo = NULL;
- 	int i;
- 
-+#ifdef CONFIG_OMAP_BOOT_TAG
-+	struct omap_board_config_entry *info = NULL;
-+
-+	if (omap_bootloader_tag_len > 4)
-+		info = (struct omap_board_config_entry *) omap_bootloader_tag;
-+	while (info != NULL) {
-+		u8 *next;
-+
-+		if (info->tag == tag) {
-+			if (skip == 0)
-+				break;
-+			skip--;
-+		}
-+
-+		if ((info->len & 0x03) != 0) {
-+			/* We bail out to avoid an alignment fault */
-+			printk(KERN_ERR "OMAP peripheral config: Length (%d) not word-aligned (tag %04x)\n",
-+			       info->len, info->tag);
-+			return NULL;
-+		}
-+		next = (u8 *) info + sizeof(*info) + info->len;
-+		if (next >= omap_bootloader_tag + omap_bootloader_tag_len)
-+			info = NULL;
-+		else
-+			info = (struct omap_board_config_entry *) next;
-+	}
-+	if (info != NULL) {
-+		/* Check the length as a lame attempt to check for
-+		 * binary inconsistency. */
-+		if (len != NO_LENGTH_CHECK) {
-+			/* Word-align len */
-+			if (len & 0x03)
-+				len = (len + 3) & ~0x03;
-+			if (info->len != len) {
-+				printk(KERN_ERR "OMAP peripheral config: Length mismatch with tag %x (want %d, got %d)\n",
-+				       tag, len, info->len);
-+				return NULL;
-+			}
-+		}
-+		if (len_out != NULL)
-+			*len_out = info->len;
-+		return info->data;
-+	}
-+#endif
- 	/* Try to find the config from the board-specific structures
- 	 * in the kernel. */
- 	for (i = 0; i < omap_board_config_size; i++) {
---- /dev/null
-+++ b/arch/arm/plat-omap/component-version.c
-@@ -0,0 +1,64 @@
-+/*
-+ *  linux/arch/arm/plat-omap/component-version.c
-+ *
-+ *  Copyright (C) 2005 Nokia Corporation
-+ *  Written by Juha Yrjölä <juha.yrjola@nokia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/err.h>
-+#include <linux/proc_fs.h>
-+#include <plat/board.h>
-+
-+static int component_version_read_proc(char *page, char **start, off_t off,
-+				       int count, int *eof, void *data)
-+{
-+	int len, i;
-+	const struct omap_version_config *ver;
-+	char *p;
-+
-+	i = 0;
-+	p = page;
-+	while ((ver = omap_get_nr_config(OMAP_TAG_VERSION_STR,
-+					 struct omap_version_config, i)) != NULL) {
-+		p += sprintf(p, "%-12s%s\n", ver->component, ver->version);
-+		i++;
-+	}
-+
-+	len = (p - page) - off;
-+	if (len < 0)
-+		len = 0;
-+
-+	*eof = (len <= count) ? 1 : 0;
-+	*start = page + off;
-+
-+	return len;
-+}
-+
-+static int __init component_version_init(void)
-+{
-+	if (omap_get_config(OMAP_TAG_VERSION_STR, struct omap_version_config) == NULL)
-+		return -ENODEV;
-+	if (!create_proc_read_entry("component_version", S_IRUGO, NULL,
-+				    component_version_read_proc, NULL))
-+		return -ENOMEM;
-+
-+	return 0;
-+}
-+
-+static void __exit component_version_exit(void)
-+{
-+	remove_proc_entry("component_version", NULL);
-+}
-+
-+late_initcall(component_version_init);
-+module_exit(component_version_exit);
-+
-+MODULE_AUTHOR("Juha Yrjölä <juha.yrjola@nokia.com>");
-+MODULE_DESCRIPTION("Component version driver");
-+MODULE_LICENSE("GPL");
---- a/arch/arm/plat-omap/Kconfig
-+++ b/arch/arm/plat-omap/Kconfig
-@@ -84,6 +84,38 @@ config OMAP_RESET_CLOCKS
- 	  probably do not want this option enabled until your
- 	  device drivers work properly.
- 
-+config OMAP_BOOT_TAG
-+	bool "OMAP bootloader information passing"
-+        depends on ARCH_OMAP
-+        default n
-+        help
-+          Say Y, if you have a bootloader which passes information
-+          about your board and its peripheral configuration.
-+
-+config OMAP_BOOT_REASON
-+	bool "Support for boot reason"
-+        depends on OMAP_BOOT_TAG
-+        default n
-+        help
-+          Say Y, if you want to have a procfs entry for reading the boot
-+          reason in user-space.
-+
-+config OMAP_COMPONENT_VERSION
-+	bool "Support for component version display"
-+	depends on OMAP_BOOT_TAG && PROC_FS
-+	default n
-+	help
-+	  Say Y, if you want to have a procfs entry for reading component
-+	  versions (supplied by the bootloader) in user-space.
-+
-+config OMAP_GPIO_SWITCH
-+	bool "GPIO switch support"
-+	help
-+	  Say Y, if you want to have support for reporting of GPIO
-+	  switches (e.g. cover switches) via sysfs. Your bootloader has
-+	  to provide information about the switches to the kernel via the
-+	  ATAG_BOARD mechanism if they're not defined by the board config.
-+
- config OMAP_MUX
- 	bool "OMAP multiplexing support"
- 	depends on ARCH_OMAP
---- a/arch/arm/plat-omap/Makefile
-+++ b/arch/arm/plat-omap/Makefile
-@@ -20,6 +20,9 @@ obj-$(CONFIG_ARCH_OMAP4) += omap_device.
- obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
- 
- obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
-+obj-$(CONFIG_OMAP_BOOT_REASON) += bootreason.o
-+obj-$(CONFIG_OMAP_COMPONENT_VERSION) += component-version.o
-+obj-$(CONFIG_OMAP_GPIO_SWITCH) += gpio-switch.o
- obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
- obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
- i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
---- a/arch/arm/include/asm/setup.h
-+++ b/arch/arm/include/asm/setup.h
-@@ -136,6 +136,13 @@ struct tag_acorn {
- 	__u8 adfsdrives;
- };
- 
-+/* TI OMAP specific information */
-+#define ATAG_BOARD       0x414f4d50
-+
-+struct tag_omap {
-+	u8 data[0];
-+};
-+
- /* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */
- #define ATAG_MEMCLK	0x41000402
- 
-@@ -162,6 +169,11 @@ struct tag {
- 		struct tag_acorn	acorn;
- 
- 		/*
-+		 * OMAP specific
-+                 */
-+                struct tag_omap         omap;
-+
-+		/*
- 		 * DC21285 specific
- 		 */
- 		struct tag_memclk	memclk;
---- /dev/null
-+++ b/arch/arm/plat-omap/gpio-switch.c
-@@ -0,0 +1,554 @@
-+/*
-+ *  linux/arch/arm/plat-omap/gpio-switch.c
-+ *
-+ *  Copyright (C) 2004-2006 Nokia Corporation
-+ *  Written by Juha Yrjölä <juha.yrjola@nokia.com>
-+ *         and Paul Mundt <paul.mundt@nokia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/sched.h>
-+#include <linux/init.h>
-+#include <linux/list.h>
-+#include <linux/irq.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/timer.h>
-+#include <linux/err.h>
-+#include <linux/slab.h>
-+#include <linux/gpio.h>
-+#include <plat/hardware.h>
-+#include <plat/irqs.h>
-+#include <plat/mux.h>
-+#include <plat/board.h>
-+#include <plat/gpio-switch.h>
-+
-+struct gpio_switch {
-+	char		name[14];
-+	u16		gpio;
-+	unsigned	flags:4;
-+	unsigned	type:4;
-+	unsigned	state:1;
-+	unsigned	both_edges:1;
-+
-+	u16		debounce_rising;
-+	u16		debounce_falling;
-+
-+	void (* notify)(void *data, int state);
-+	void *notify_data;
-+
-+	struct work_struct	work;
-+	struct timer_list	timer;
-+	struct platform_device	pdev;
-+
-+	struct list_head	node;
-+};
-+
-+static LIST_HEAD(gpio_switches);
-+static struct platform_device *gpio_sw_platform_dev;
-+static struct platform_driver gpio_sw_driver;
-+
-+static const struct omap_gpio_switch *board_gpio_sw_table;
-+static int board_gpio_sw_count;
-+
-+static const char *cover_str[2] = { "open", "closed" };
-+static const char *connection_str[2] = { "disconnected", "connected" };
-+static const char *activity_str[2] = { "inactive", "active" };
-+
-+/*
-+ * GPIO switch state default debounce delay in ms
-+ */
-+#define OMAP_GPIO_SW_DEFAULT_DEBOUNCE		10
-+
-+static const char **get_sw_str(struct gpio_switch *sw)
-+{
-+	switch (sw->type) {
-+	case OMAP_GPIO_SWITCH_TYPE_COVER:
-+		return cover_str;
-+	case OMAP_GPIO_SWITCH_TYPE_CONNECTION:
-+		return connection_str;
-+	case OMAP_GPIO_SWITCH_TYPE_ACTIVITY:
-+		return activity_str;
-+	default:
-+		BUG();
-+		return NULL;
-+	}
-+}
-+
-+static const char *get_sw_type(struct gpio_switch *sw)
-+{
-+	switch (sw->type) {
-+	case OMAP_GPIO_SWITCH_TYPE_COVER:
-+		return "cover";
-+	case OMAP_GPIO_SWITCH_TYPE_CONNECTION:
-+		return "connection";
-+	case OMAP_GPIO_SWITCH_TYPE_ACTIVITY:
-+		return "activity";
-+	default:
-+		BUG();
-+		return NULL;
-+	}
-+}
-+
-+static void print_sw_state(struct gpio_switch *sw, int state)
-+{
-+	const char **str;
-+
-+	str = get_sw_str(sw);
-+	if (str != NULL)
-+		printk(KERN_INFO "%s (GPIO %d) is now %s\n", sw->name, sw->gpio, str[state]);
-+}
-+
-+static int gpio_sw_get_state(struct gpio_switch *sw)
-+{
-+	int state;
-+
-+	state = gpio_get_value(sw->gpio);
-+	if (sw->flags & OMAP_GPIO_SWITCH_FLAG_INVERTED)
-+		state = !state;
-+
-+	return state;
-+}
-+
-+static ssize_t gpio_sw_state_store(struct device *dev,
-+				   struct device_attribute *attr,
-+				   const char *buf,
-+				   size_t count)
-+{
-+	struct gpio_switch *sw = dev_get_drvdata(dev);
-+	const char **str;
-+	char state[16];
-+	int enable;
-+
-+	if (!(sw->flags & OMAP_GPIO_SWITCH_FLAG_OUTPUT))
-+		return -EPERM;
-+
-+	if (sscanf(buf, "%15s", state) != 1)
-+		return -EINVAL;
-+
-+	str = get_sw_str(sw);
-+	if (strcmp(state, str[0]) == 0)
-+		sw->state = enable = 0;
-+	else if (strcmp(state, str[1]) == 0)
-+		sw->state = enable = 1;
-+	else
-+		return -EINVAL;
-+
-+	if (sw->flags & OMAP_GPIO_SWITCH_FLAG_INVERTED)
-+		enable = !enable;
-+	gpio_set_value(sw->gpio, enable);
-+
-+	return count;
-+}
-+
-+static ssize_t gpio_sw_state_show(struct device *dev,
-+				  struct device_attribute *attr,
-+				  char *buf)
-+{
-+	struct gpio_switch *sw = dev_get_drvdata(dev);
-+	const char **str;
-+
-+	str = get_sw_str(sw);
-+	return sprintf(buf, "%s\n", str[sw->state]);
-+}
-+
-+static DEVICE_ATTR(state, S_IRUGO | S_IWUSR, gpio_sw_state_show,
-+		   gpio_sw_state_store);
-+
-+static ssize_t gpio_sw_type_show(struct device *dev,
-+				 struct device_attribute *attr,
-+				 char *buf)
-+{
-+	struct gpio_switch *sw = dev_get_drvdata(dev);
-+
-+	return sprintf(buf, "%s\n", get_sw_type(sw));
-+}
-+
-+static DEVICE_ATTR(type, S_IRUGO, gpio_sw_type_show, NULL);
-+
-+static ssize_t gpio_sw_direction_show(struct device *dev,
-+				      struct device_attribute *attr,
-+				      char *buf)
-+{
-+	struct gpio_switch *sw = dev_get_drvdata(dev);
-+	int is_output;
-+
-+	is_output = sw->flags & OMAP_GPIO_SWITCH_FLAG_OUTPUT;
-+	return sprintf(buf, "%s\n", is_output ? "output" : "input");
-+}
-+
-+static DEVICE_ATTR(direction, S_IRUGO, gpio_sw_direction_show, NULL);
-+
-+
-+static irqreturn_t gpio_sw_irq_handler(int irq, void *arg)
-+{
-+	struct gpio_switch *sw = arg;
-+	unsigned long timeout;
-+	int state;
-+
-+	if (!sw->both_edges) {
-+		if (gpio_get_value(sw->gpio))
-+			irq_set_irq_type(OMAP_GPIO_IRQ(sw->gpio), IRQ_TYPE_EDGE_FALLING);
-+		else
-+			irq_set_irq_type(OMAP_GPIO_IRQ(sw->gpio), IRQ_TYPE_EDGE_RISING);
-+	}
-+
-+	state = gpio_sw_get_state(sw);
-+	if (sw->state == state)
-+		return IRQ_HANDLED;
-+
-+	if (state)
-+		timeout = sw->debounce_rising;
-+	else
-+		timeout = sw->debounce_falling;
-+	if (!timeout)
-+		schedule_work(&sw->work);
-+	else
-+		mod_timer(&sw->timer, jiffies + msecs_to_jiffies(timeout));
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static void gpio_sw_timer(unsigned long arg)
-+{
-+	struct gpio_switch *sw = (struct gpio_switch *) arg;
-+
-+	schedule_work(&sw->work);
-+}
-+
-+static void gpio_sw_handler(struct work_struct *work)
-+{
-+	struct gpio_switch *sw = container_of(work, struct gpio_switch, work);
-+	int state;
-+
-+	state = gpio_sw_get_state(sw);
-+	if (sw->state == state)
-+		return;
-+
-+	sw->state = state;
-+	if (sw->notify != NULL)
-+		sw->notify(sw->notify_data, state);
-+	sysfs_notify(&sw->pdev.dev.kobj, NULL, "state");
-+	print_sw_state(sw, state);
-+}
-+
-+static int __init can_do_both_edges(struct gpio_switch *sw)
-+{
-+	if (!cpu_class_is_omap1())
-+		return 1;
-+	if (OMAP_GPIO_IS_MPUIO(sw->gpio))
-+		return 0;
-+	else
-+		return 1;
-+}
-+
-+static void gpio_sw_release(struct device *dev)
-+{
-+}
-+
-+static int __init new_switch(struct gpio_switch *sw)
-+{
-+	int r, direction, trigger;
-+
-+	switch (sw->type) {
-+	case OMAP_GPIO_SWITCH_TYPE_COVER:
-+	case OMAP_GPIO_SWITCH_TYPE_CONNECTION:
-+	case OMAP_GPIO_SWITCH_TYPE_ACTIVITY:
-+		break;
-+	default:
-+		printk(KERN_ERR "invalid GPIO switch type: %d\n", sw->type);
-+		return -EINVAL;
-+	}
-+
-+	sw->pdev.name	= sw->name;
-+	sw->pdev.id	= -1;
-+
-+	sw->pdev.dev.parent = &gpio_sw_platform_dev->dev;
-+	sw->pdev.dev.driver = &gpio_sw_driver.driver;
-+	sw->pdev.dev.release = gpio_sw_release;
-+
-+	r = platform_device_register(&sw->pdev);
-+	if (r) {
-+		printk(KERN_ERR "gpio-switch: platform device registration "
-+		       "failed for %s", sw->name);
-+		return r;
-+	}
-+	dev_set_drvdata(&sw->pdev.dev, sw);
-+
-+	r = gpio_request(sw->gpio, "gpio-switch");
-+	if (r < 0) {
-+		platform_device_unregister(&sw->pdev);
-+		return r;
-+	}
-+
-+	/* input: 1, output: 0 */
-+	direction = !(sw->flags & OMAP_GPIO_SWITCH_FLAG_OUTPUT);
-+	if (direction)
-+		gpio_direction_input(sw->gpio);
-+	else
-+		gpio_direction_output(sw->gpio, 0);
-+
-+	sw->state = gpio_sw_get_state(sw);
-+
-+	r = 0;
-+	r |= device_create_file(&sw->pdev.dev, &dev_attr_state);
-+	r |= device_create_file(&sw->pdev.dev, &dev_attr_type);
-+	r |= device_create_file(&sw->pdev.dev, &dev_attr_direction);
-+	if (r)
-+		printk(KERN_ERR "gpio-switch: attribute file creation "
-+		       "failed for %s\n", sw->name);
-+
-+	if (!direction)
-+		return 0;
-+
-+	if (can_do_both_edges(sw)) {
-+		trigger = IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING;
-+		sw->both_edges = 1;
-+	} else {
-+		if (gpio_get_value(sw->gpio))
-+			trigger = IRQF_TRIGGER_FALLING;
-+		else
-+			trigger = IRQF_TRIGGER_RISING;
-+	}
-+	r = request_irq(OMAP_GPIO_IRQ(sw->gpio), gpio_sw_irq_handler,
-+			IRQF_SHARED | trigger, sw->name, sw);
-+	if (r < 0) {
-+		printk(KERN_ERR "gpio-switch: request_irq() failed "
-+		       "for GPIO %d\n", sw->gpio);
-+		platform_device_unregister(&sw->pdev);
-+		gpio_free(sw->gpio);
-+		return r;
-+	}
-+
-+	INIT_WORK(&sw->work, gpio_sw_handler);
-+	init_timer(&sw->timer);
-+
-+	sw->timer.function = gpio_sw_timer;
-+	sw->timer.data = (unsigned long)sw;
-+
-+	list_add(&sw->node, &gpio_switches);
-+
-+	return 0;
-+}
-+
-+static int __init add_atag_switches(void)
-+{
-+	const struct omap_gpio_switch_config *cfg;
-+	struct gpio_switch *sw;
-+	int i, r;
-+
-+	for (i = 0; ; i++) {
-+		cfg = omap_get_nr_config(OMAP_TAG_GPIO_SWITCH,
-+					 struct omap_gpio_switch_config, i);
-+		if (cfg == NULL)
-+			break;
-+		sw = kzalloc(sizeof(*sw), GFP_KERNEL);
-+		if (sw == NULL) {
-+			printk(KERN_ERR "gpio-switch: kmalloc failed\n");
-+			return -ENOMEM;
-+		}
-+		strncpy(sw->name, cfg->name, sizeof(cfg->name));
-+		sw->gpio = cfg->gpio;
-+		sw->flags = cfg->flags;
-+		sw->type = cfg->type;
-+		sw->debounce_rising = OMAP_GPIO_SW_DEFAULT_DEBOUNCE;
-+		sw->debounce_falling = OMAP_GPIO_SW_DEFAULT_DEBOUNCE;
-+		if ((r = new_switch(sw)) < 0) {
-+			kfree(sw);
-+			return r;
-+		}
-+	}
-+	return 0;
-+}
-+
-+static struct gpio_switch * __init find_switch(int gpio, const char *name)
-+{
-+	struct gpio_switch *sw;
-+
-+	list_for_each_entry(sw, &gpio_switches, node) {
-+		if ((gpio < 0 || sw->gpio != gpio) &&
-+		    (name == NULL || strcmp(sw->name, name) != 0))
-+			continue;
-+
-+		if (gpio < 0 || name == NULL)
-+			goto no_check;
-+
-+		if (strcmp(sw->name, name) != 0)
-+			printk("gpio-switch: name mismatch for %d (%s, %s)\n",
-+			       gpio, name, sw->name);
-+		else if (sw->gpio != gpio)
-+			printk("gpio-switch: GPIO mismatch for %s (%d, %d)\n",
-+			       name, gpio, sw->gpio);
-+no_check:
-+		return sw;
-+	}
-+	return NULL;
-+}
-+
-+static int __init add_board_switches(void)
-+{
-+	int i;
-+
-+	for (i = 0; i < board_gpio_sw_count; i++) {
-+		const struct omap_gpio_switch *cfg;
-+		struct gpio_switch *sw;
-+		int r;
-+
-+		cfg = board_gpio_sw_table + i;
-+		if (strlen(cfg->name) > sizeof(sw->name) - 1)
-+			return -EINVAL;
-+		/* Check whether we only update an existing switch
-+		 * or add a new switch. */
-+		sw = find_switch(cfg->gpio, cfg->name);
-+		if (sw != NULL) {
-+			sw->debounce_rising = cfg->debounce_rising;
-+			sw->debounce_falling = cfg->debounce_falling;
-+			sw->notify = cfg->notify;
-+			sw->notify_data = cfg->notify_data;
-+			continue;
-+		} else {
-+			if (cfg->gpio < 0 || cfg->name == NULL) {
-+				printk("gpio-switch: required switch not "
-+				       "found (%d, %s)\n", cfg->gpio,
-+				       cfg->name);
-+				continue;
-+			}
-+		}
-+		sw = kzalloc(sizeof(*sw), GFP_KERNEL);
-+		if (sw == NULL) {
-+			printk(KERN_ERR "gpio-switch: kmalloc failed\n");
-+			return -ENOMEM;
-+		}
-+		strlcpy(sw->name, cfg->name, sizeof(sw->name));
-+		sw->gpio = cfg->gpio;
-+		sw->flags = cfg->flags;
-+		sw->type = cfg->type;
-+		sw->debounce_rising = cfg->debounce_rising;
-+		sw->debounce_falling = cfg->debounce_falling;
-+		sw->notify = cfg->notify;
-+		sw->notify_data = cfg->notify_data;
-+		if ((r = new_switch(sw)) < 0) {
-+			kfree(sw);
-+			return r;
-+		}
-+	}
-+	return 0;
-+}
-+
-+static void gpio_sw_cleanup(void)
-+{
-+	struct gpio_switch *sw = NULL, *old = NULL;
-+
-+	list_for_each_entry(sw, &gpio_switches, node) {
-+		if (old != NULL)
-+			kfree(old);
-+		flush_scheduled_work();
-+		del_timer_sync(&sw->timer);
-+
-+		free_irq(OMAP_GPIO_IRQ(sw->gpio), sw);
-+
-+		device_remove_file(&sw->pdev.dev, &dev_attr_state);
-+		device_remove_file(&sw->pdev.dev, &dev_attr_type);
-+		device_remove_file(&sw->pdev.dev, &dev_attr_direction);
-+
-+		platform_device_unregister(&sw->pdev);
-+		gpio_free(sw->gpio);
-+		old = sw;
-+	}
-+	kfree(old);
-+}
-+
-+static void __init report_initial_state(void)
-+{
-+	struct gpio_switch *sw;
-+
-+	list_for_each_entry(sw, &gpio_switches, node) {
-+		int state;
-+
-+		state = gpio_get_value(sw->gpio);
-+		if (sw->flags & OMAP_GPIO_SWITCH_FLAG_INVERTED)
-+			state = !state;
-+		if (sw->notify != NULL)
-+			sw->notify(sw->notify_data, state);
-+		print_sw_state(sw, state);
-+	}
-+}
-+
-+static int gpio_sw_remove(struct platform_device *dev)
-+{
-+	return 0;
-+}
-+
-+static struct platform_driver gpio_sw_driver = {
-+	.remove		= gpio_sw_remove,
-+	.driver		= {
-+		.name	= "gpio-switch",
-+	},
-+};
-+
-+void __init omap_register_gpio_switches(const struct omap_gpio_switch *tbl,
-+					int count)
-+{
-+	BUG_ON(board_gpio_sw_table != NULL);
-+
-+	board_gpio_sw_table = tbl;
-+	board_gpio_sw_count = count;
-+}
-+
-+static int __init gpio_sw_init(void)
-+{
-+	int r;
-+
-+	printk(KERN_INFO "OMAP GPIO switch handler initializing\n");
-+
-+	r = platform_driver_register(&gpio_sw_driver);
-+	if (r)
-+		return r;
-+
-+	gpio_sw_platform_dev = platform_device_register_simple("gpio-switch",
-+							       -1, NULL, 0);
-+	if (IS_ERR(gpio_sw_platform_dev)) {
-+		r = PTR_ERR(gpio_sw_platform_dev);
-+		goto err1;
-+	}
-+
-+	r = add_atag_switches();
-+	if (r < 0)
-+		goto err2;
-+
-+	r = add_board_switches();
-+	if (r < 0)
-+		goto err2;
-+
-+	report_initial_state();
-+
-+	return 0;
-+err2:
-+	gpio_sw_cleanup();
-+	platform_device_unregister(gpio_sw_platform_dev);
-+err1:
-+	platform_driver_unregister(&gpio_sw_driver);
-+	return r;
-+}
-+
-+static void __exit gpio_sw_exit(void)
-+{
-+	gpio_sw_cleanup();
-+	platform_device_unregister(gpio_sw_platform_dev);
-+	platform_driver_unregister(&gpio_sw_driver);
-+}
-+
-+#ifndef MODULE
-+late_initcall(gpio_sw_init);
-+#else
-+module_init(gpio_sw_init);
-+#endif
-+module_exit(gpio_sw_exit);
-+
-+MODULE_AUTHOR("Juha Yrjölä <juha.yrjola@nokia.com>, Paul Mundt <paul.mundt@nokia.com");
-+MODULE_DESCRIPTION("GPIO switch driver");
-+MODULE_LICENSE("GPL");
---- a/arch/arm/plat-omap/include/plat/board.h
-+++ b/arch/arm/plat-omap/include/plat/board.h
-@@ -151,6 +151,14 @@ struct omap_board_config_kernel {
- 	const void *data;
- };
- 
-+struct omap_gpio_switch_config {
-+	char name[12];
-+	u16 gpio;
-+	int flags:4;
-+	int type:4;
-+	int key_code:24; /* Linux key code */
-+};
-+
- extern const void *__init __omap_get_config(u16 tag, size_t len, int nr);
- 
- #define omap_get_config(tag, type) \
diff --git a/target/linux/omap24xx/patches-3.3/250-cbus.patch b/target/linux/omap24xx/patches-3.3/250-cbus.patch
deleted file mode 100644
index b152a00b5b..0000000000
--- a/target/linux/omap24xx/patches-3.3/250-cbus.patch
+++ /dev/null
@@ -1,3463 +0,0 @@
---- /dev/null
-+++ b/drivers/cbus/cbus.c
-@@ -0,0 +1,335 @@
-+/*
-+ * drivers/cbus/cbus.c
-+ *
-+ * Support functions for CBUS serial protocol
-+ *
-+ * Copyright (C) 2004-2010 Nokia Corporation
-+ * Contact: Felipe Balbi <felipe.balbi@nokia.com>
-+ *
-+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>,
-+ *	      David Weinehall <david.weinehall@nokia.com>, and
-+ *	      Mikko Ylinen <mikko.k.ylinen@nokia.com>
-+ *
-+ * Several updates and cleanups by Felipe Balbi <felipe.balbi@nokia.com>
-+ *
-+ * This file is subject to the terms and conditions of the GNU General
-+ * Public License. See the file "COPYING" in the main directory of this
-+ * archive for more details.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/export.h>
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+#include <linux/gpio.h>
-+#include <linux/platform_device.h>
-+#include <linux/platform_data/cbus.h>
-+
-+#include "cbus.h"
-+
-+#define CBUS_XFER_READ		1
-+#define CBUS_XFER_WRITE		0
-+
-+struct cbus_host {
-+	/* host lock */
-+	spinlock_t	lock;
-+
-+	struct device	*dev;
-+
-+	int		clk_gpio;
-+	int		dat_gpio;
-+	int		sel_gpio;
-+};
-+
-+/**
-+ * cbus_send_bit - sends one bit over the bus
-+ * @host: the host we're using
-+ * @bit: one bit of information to send
-+ * @input: whether to set data pin as input after sending
-+ */
-+static int cbus_send_bit(struct cbus_host *host, unsigned bit,
-+		unsigned input)
-+{
-+	int ret = 0;
-+
-+	gpio_set_value(host->dat_gpio, bit ? 1 : 0);
-+	gpio_set_value(host->clk_gpio, 1);
-+
-+	/* The data bit is read on the rising edge of CLK */
-+	if (input)
-+		ret = gpio_direction_input(host->dat_gpio);
-+
-+	gpio_set_value(host->clk_gpio, 0);
-+
-+	return ret;
-+}
-+
-+/**
-+ * cbus_send_data - sends @len amount of data over the bus
-+ * @host: the host we're using
-+ * @data: the data to send
-+ * @len: size of the transfer
-+ * @input: whether to set data pin as input after sending
-+ */
-+static int cbus_send_data(struct cbus_host *host, unsigned data, unsigned len,
-+		unsigned input)
-+{
-+	int ret = 0;
-+	int i;
-+
-+	for (i = len; i > 0; i--) {
-+		ret = cbus_send_bit(host, data & (1 << (i - 1)),
-+				input && (i == 1));
-+		if (ret < 0)
-+			goto out;
-+	}
-+
-+out:
-+	return ret;
-+}
-+
-+/**
-+ * cbus_receive_bit - receives one bit from the bus
-+ * @host: the host we're using
-+ */
-+static int cbus_receive_bit(struct cbus_host *host)
-+{
-+	int ret;
-+
-+	gpio_set_value(host->clk_gpio, 1);
-+	ret = gpio_get_value(host->dat_gpio);
-+	if (ret < 0)
-+		goto out;
-+	gpio_set_value(host->clk_gpio, 0);
-+
-+out:
-+	return ret;
-+}
-+
-+/**
-+ * cbus_receive_data - receives @len data from the bus
-+ * @host: the host we're using
-+ * @len: the length of data to receive
-+ */
-+static int cbus_receive_data(struct cbus_host *host, unsigned len)
-+{
-+	int ret = 0;
-+	int i;
-+
-+	for (i = 16; i > 0; i--) {
-+		int bit = cbus_receive_bit(host);
-+
-+		if (bit < 0)
-+			goto out;
-+
-+		if (bit)
-+			ret |= 1 << (i - 1);
-+	}
-+
-+out:
-+	return ret;
-+}
-+
-+/**
-+ * cbus_transfer - transfers data over the bus
-+ * @host: the host we're using
-+ * @rw: read/write flag
-+ * @dev: device address
-+ * @reg: register address
-+ * @data: if @rw == 0 data to send otherwise 0
-+ */
-+static int cbus_transfer(struct cbus_host *host, unsigned rw, unsigned dev,
-+		unsigned reg, unsigned data)
-+{
-+	unsigned long flags;
-+	int input = 0;
-+	int ret = 0;
-+
-+	/* We don't want interrupts disturbing our transfer */
-+	spin_lock_irqsave(&host->lock, flags);
-+
-+	/* Reset state and start of transfer, SEL stays down during transfer */
-+	gpio_set_value(host->sel_gpio, 0);
-+
-+	/* Set the DAT pin to output */
-+	gpio_direction_output(host->dat_gpio, 1);
-+
-+	/* Send the device address */
-+	ret = cbus_send_data(host, dev, 3, 0);
-+	if (ret < 0) {
-+		dev_dbg(host->dev, "failed sending device addr\n");
-+		goto out;
-+	}
-+
-+	/* Send the rw flag */
-+	ret = cbus_send_bit(host, rw, 0);
-+	if (ret < 0) {
-+		dev_dbg(host->dev, "failed sending read/write flag\n");
-+		goto out;
-+	}
-+
-+	/* Send the register address */
-+	if (rw)
-+		input = true;
-+
-+	ret = cbus_send_data(host, reg, 5, input);
-+	if (ret < 0) {
-+		dev_dbg(host->dev, "failed sending register addr\n");
-+		goto out;
-+	}
-+
-+	if (!rw) {
-+		ret = cbus_send_data(host, data, 16, 0);
-+		if (ret < 0) {
-+			dev_dbg(host->dev, "failed sending data\n");
-+			goto out;
-+		}
-+	} else {
-+		gpio_set_value(host->clk_gpio, 1);
-+
-+		ret = cbus_receive_data(host, 16);
-+		if (ret < 0) {
-+			dev_dbg(host->dev, "failed receiving data\n");
-+			goto out;
-+		}
-+	}
-+
-+	/* Indicate end of transfer, SEL goes up until next transfer */
-+	gpio_set_value(host->sel_gpio, 1);
-+	gpio_set_value(host->clk_gpio, 1);
-+	gpio_set_value(host->clk_gpio, 0);
-+
-+out:
-+	spin_unlock_irqrestore(&host->lock, flags);
-+
-+	return ret;
-+}
-+
-+/**
-+ * cbus_read_reg - reads a given register from the device
-+ * @child: the child device
-+ * @dev: device address
-+ * @reg: register address
-+ */
-+int cbus_read_reg(struct device *child, unsigned dev, unsigned reg)
-+{
-+	struct cbus_host	*host = dev_get_drvdata(child->parent);
-+
-+	return cbus_transfer(host, CBUS_XFER_READ, dev, reg, 0);
-+}
-+EXPORT_SYMBOL(cbus_read_reg);
-+
-+/**
-+ * cbus_write_reg - writes to a given register of the device
-+ * @child: the child device
-+ * @dev: device address
-+ * @reg: register address
-+ * @val: data to be written to @reg
-+ */
-+int cbus_write_reg(struct device *child, unsigned dev, unsigned reg,
-+		unsigned val)
-+{
-+	struct cbus_host	*host = dev_get_drvdata(child->parent);
-+
-+	return cbus_transfer(host, CBUS_XFER_WRITE, dev, reg, val);
-+}
-+EXPORT_SYMBOL(cbus_write_reg);
-+
-+static int __init cbus_bus_probe(struct platform_device *pdev)
-+{
-+	struct cbus_host *chost;
-+	struct cbus_host_platform_data *pdata = pdev->dev.platform_data;
-+	int ret;
-+
-+	chost = kzalloc(sizeof(*chost), GFP_KERNEL);
-+	if (chost == NULL)
-+		return -ENOMEM;
-+
-+	spin_lock_init(&chost->lock);
-+
-+	chost->clk_gpio = pdata->clk_gpio;
-+	chost->dat_gpio = pdata->dat_gpio;
-+	chost->sel_gpio = pdata->sel_gpio;
-+	chost->dev = &pdev->dev;
-+
-+	ret = gpio_request(chost->clk_gpio, "CBUS clk");
-+	if (ret < 0)
-+		goto exit1;
-+
-+	ret = gpio_request(chost->dat_gpio, "CBUS data");
-+	if (ret < 0)
-+		goto exit2;
-+
-+	ret = gpio_request(chost->sel_gpio, "CBUS sel");
-+	if (ret < 0)
-+		goto exit3;
-+
-+	gpio_direction_output(chost->clk_gpio, 0);
-+	gpio_direction_input(chost->dat_gpio);
-+	gpio_direction_output(chost->sel_gpio, 1);
-+
-+	gpio_set_value(chost->clk_gpio, 1);
-+	gpio_set_value(chost->clk_gpio, 0);
-+
-+	platform_set_drvdata(pdev, chost);
-+
-+	return 0;
-+exit3:
-+	gpio_free(chost->dat_gpio);
-+exit2:
-+	gpio_free(chost->clk_gpio);
-+exit1:
-+	kfree(chost);
-+
-+	return ret;
-+}
-+
-+static void __exit cbus_bus_remove(struct platform_device *pdev)
-+{
-+	struct cbus_host	*chost = platform_get_drvdata(pdev);
-+
-+	gpio_free(chost->sel_gpio);
-+	gpio_free(chost->dat_gpio);
-+	gpio_free(chost->clk_gpio);
-+
-+	kfree(chost);
-+}
-+
-+static struct platform_driver cbus_driver = {
-+	.remove		= __exit_p(cbus_bus_remove),
-+	.driver		= {
-+		.name	= "cbus",
-+	},
-+};
-+
-+static int __init cbus_bus_init(void)
-+{
-+	return platform_driver_probe(&cbus_driver, cbus_bus_probe);
-+}
-+subsys_initcall(cbus_bus_init);
-+
-+static void __exit cbus_bus_exit(void)
-+{
-+	platform_driver_unregister(&cbus_driver);
-+}
-+module_exit(cbus_bus_exit);
-+
-+MODULE_DESCRIPTION("CBUS serial protocol");
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Juha Yrjölä");
-+MODULE_AUTHOR("David Weinehall");
-+MODULE_AUTHOR("Mikko Ylinen");
-+MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
-+
---- /dev/null
-+++ b/drivers/cbus/cbus.h
-@@ -0,0 +1,30 @@
-+/*
-+ * drivers/cbus/cbus.h
-+ *
-+ * Copyright (C) 2004, 2005 Nokia Corporation
-+ *
-+ * Written by Juha Yrjölä <juha.yrjola@nokia.com> and
-+ *	      David Weinehall <david.weinehall@nokia.com>
-+ *
-+ * This file is subject to the terms and conditions of the GNU General
-+ * Public License. See the file "COPYING" in the main directory of this
-+ * archive for more details.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#ifndef __DRIVERS_CBUS_CBUS_H
-+#define __DRIVERS_CBUS_CBUS_H
-+
-+extern int cbus_read_reg(struct device *, unsigned dev, unsigned reg);
-+extern int cbus_write_reg(struct device *, unsigned dev, unsigned reg,
-+		unsigned val);
-+
-+#endif /* __DRIVERS_CBUS_CBUS_H */
---- /dev/null
-+++ b/drivers/cbus/Kconfig
-@@ -0,0 +1,86 @@
-+#
-+# CBUS device configuration
-+#
-+
-+menu "CBUS support"
-+
-+config CBUS
-+	bool "CBUS support on OMAP"
-+	---help---
-+	  CBUS is a proprietary serial protocol by Nokia.  It is mainly
-+	  used for accessing Energy Management auxiliary chips.
-+
-+	  If you want CBUS support, you should say Y here.
-+
-+config CBUS_TAHVO
-+	depends on CBUS
-+	bool "Support for Tahvo"
-+	---help---
-+	  Tahvo is a mixed signal ASIC with some system features
-+
-+	  If you want Tahvo support, you should say Y here.
-+
-+if CBUS_TAHVO
-+
-+config CBUS_TAHVO_USB
-+	depends on USB
-+	depends on ARCH_OMAP
-+	select USB_OTG_UTILS
-+	tristate "Support for Tahvo USB transceiver"
-+	---help---
-+	  If you want Tahvo support for USB transceiver, say Y or M here.
-+
-+config CBUS_TAHVO_USB_HOST_BY_DEFAULT
-+	depends on CBUS_TAHVO_USB && USB_OTG
-+	boolean "Device in USB host mode by default"
-+	---help---
-+	  Say Y here, if you want the device to enter USB host mode
-+	  by default on bootup.
-+
-+endif # CBUS_TAHVO
-+
-+config CBUS_RETU
-+	depends on CBUS
-+	bool "Support for Retu"
-+	---help---
-+	  Retu is a mixed signal ASIC with some system features
-+
-+	  If you want Retu support, you should say Y here.
-+
-+if CBUS_RETU
-+
-+config CBUS_RETU_POWERBUTTON
-+	depends on INPUT
-+	bool "Support for Retu power button"
-+	---help---
-+	  The power button on Nokia 770 is connected to the Retu ASIC.
-+
-+	  If you want support for the Retu power button, you should say Y here.
-+
-+config CBUS_RETU_RTC
-+	depends on RTC_CLASS
-+	depends on ARCH_OMAP
-+	tristate "Support for Retu pseudo-RTC"
-+	---help---
-+	  Say Y here if you want support for the device that alleges to be an
-+	  RTC in Retu. This will expose a sysfs interface for it.
-+
-+config CBUS_RETU_WDT
-+	depends on SYSFS && WATCHDOG
-+	depends on ARCH_OMAP
-+	tristate "Support for Retu watchdog timer"
-+	---help---
-+	  Say Y here if you want support for the watchdog in Retu. This will
-+	  expose a sysfs interface to grok it.
-+
-+config CBUS_RETU_HEADSET
-+	depends on SYSFS
-+	tristate "Support for headset detection with Retu/Vilma"
-+	---help---
-+	  Say Y here if you want support detecting a headset that's connected
-+	  to Retu/Vilma. Detection state and events are exposed through
-+	  sysfs.
-+
-+endif # CBUS_RETU
-+
-+endmenu
---- /dev/null
-+++ b/drivers/cbus/Makefile
-@@ -0,0 +1,13 @@
-+#
-+# Makefile for CBUS.
-+#
-+
-+obj-$(CONFIG_CBUS)		+= cbus.o
-+obj-$(CONFIG_CBUS_TAHVO)	+= tahvo.o
-+obj-$(CONFIG_CBUS_RETU)		+= retu.o
-+obj-$(CONFIG_CBUS_TAHVO_USB)	+= tahvo-usb.o
-+
-+obj-$(CONFIG_CBUS_RETU_POWERBUTTON) += retu-pwrbutton.o
-+obj-$(CONFIG_CBUS_RETU_RTC)	+= retu-rtc.o
-+obj-$(CONFIG_CBUS_RETU_WDT)	+= retu-wdt.o
-+obj-$(CONFIG_CBUS_RETU_HEADSET)	+= retu-headset.o
---- /dev/null
-+++ b/drivers/cbus/retu.c
-@@ -0,0 +1,549 @@
-+/**
-+ * drivers/cbus/retu.c
-+ *
-+ * Support functions for Retu ASIC
-+ *
-+ * Copyright (C) 2004, 2005 Nokia Corporation
-+ *
-+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>,
-+ *	      David Weinehall <david.weinehall@nokia.com>, and
-+ *	      Mikko Ylinen <mikko.k.ylinen@nokia.com>
-+ *
-+ * This file is subject to the terms and conditions of the GNU General
-+ * Public License. See the file "COPYING" in the main directory of this
-+ * archive for more details.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+
-+#include <linux/slab.h>
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/device.h>
-+#include <linux/mutex.h>
-+#include <linux/irq.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/platform_data/cbus.h>
-+
-+#include <asm/bitops.h>
-+
-+#include "cbus.h"
-+#include "retu.h"
-+
-+struct retu {
-+	/* Device lock */
-+	struct mutex		mutex;
-+	struct device		*dev;
-+
-+	int			devid;
-+
-+	int			irq_base;
-+	int			irq_end;
-+
-+	int			irq;
-+
-+	int			ack;
-+	bool			ack_pending;
-+
-+	int			mask;
-+	bool			mask_pending;
-+
-+	bool			is_vilma;
-+};
-+
-+static struct retu *the_retu;
-+
-+/**
-+ * __retu_read_reg - Read a value from a register in Retu
-+ * @retu: pointer to retu structure
-+ * @reg: the register address to read from
-+ */
-+static int __retu_read_reg(struct retu *retu, unsigned reg)
-+{
-+	return cbus_read_reg(retu->dev, retu->devid, reg);
-+}
-+
-+/**
-+ * __retu_write_reg - Writes a value to a register in Retu
-+ * @retu: pointer to retu structure
-+ * @reg: the register address to write to
-+ * @val: the value to write to the register
-+ */
-+static void __retu_write_reg(struct retu *retu, unsigned reg, u16 val)
-+{
-+	cbus_write_reg(retu->dev, retu->devid, reg, val);
-+}
-+
-+/**
-+ * retu_read_reg - Read a value from a register in Retu
-+ * @child: device pointer for the calling child
-+ * @reg: the register to read from
-+ *
-+ * This function returns the contents of the specified register
-+ */
-+int retu_read_reg(struct device *child, unsigned reg)
-+{
-+	struct retu		*retu = dev_get_drvdata(child->parent);
-+
-+	return __retu_read_reg(retu, reg);
-+}
-+EXPORT_SYMBOL_GPL(retu_read_reg);
-+
-+/**
-+ * retu_write_reg - Write a value to a register in Retu
-+ * @child: the pointer to our calling child
-+ * @reg: the register to write to
-+ * @val: the value to write to the register
-+ *
-+ * This function writes a value to the specified register
-+ */
-+void retu_write_reg(struct device *child, unsigned reg, u16 val)
-+{
-+	struct retu		*retu = dev_get_drvdata(child->parent);
-+
-+	mutex_lock(&retu->mutex);
-+	__retu_write_reg(retu, reg, val);
-+	mutex_unlock(&retu->mutex);
-+}
-+EXPORT_SYMBOL_GPL(retu_write_reg);
-+
-+/**
-+ * retu_set_clear_reg_bits - helper function to read/set/clear bits
-+ * @child: device pointer to calling child
-+ * @reg: the register address
-+ * @set: mask for setting bits
-+ * @clear: mask for clearing bits
-+ */
-+void retu_set_clear_reg_bits(struct device *child, unsigned reg, u16 set,
-+		u16 clear)
-+{
-+	struct retu		*retu = dev_get_drvdata(child->parent);
-+	u16			w;
-+
-+	mutex_lock(&retu->mutex);
-+	w = __retu_read_reg(retu, reg);
-+	w &= ~clear;
-+	w |= set;
-+	__retu_write_reg(retu, reg, w);
-+	mutex_unlock(&retu->mutex);
-+}
-+EXPORT_SYMBOL_GPL(retu_set_clear_reg_bits);
-+
-+#define ADC_MAX_CHAN_NUMBER	13
-+
-+/**
-+ * retu_read_adc - Reads AD conversion result
-+ * @child: device pointer to calling child
-+ * @channel: the ADC channel to read from
-+ */
-+int retu_read_adc(struct device *child, int channel)
-+{
-+	struct retu		*retu = dev_get_drvdata(child->parent);
-+	int			res;
-+
-+	if (!retu)
-+		return -ENODEV;
-+
-+	if (channel < 0 || channel > ADC_MAX_CHAN_NUMBER)
-+		return -EINVAL;
-+
-+	mutex_lock(&retu->mutex);
-+
-+	if ((channel == 8) && retu->is_vilma) {
-+		int scr = __retu_read_reg(retu, RETU_REG_ADCSCR);
-+		int ch = (__retu_read_reg(retu, RETU_REG_ADCR) >> 10) & 0xf;
-+		if (((scr & 0xff) != 0) && (ch != 8))
-+			__retu_write_reg(retu, RETU_REG_ADCSCR, (scr & ~0xff));
-+	}
-+
-+	/* Select the channel and read result */
-+	__retu_write_reg(retu, RETU_REG_ADCR, channel << 10);
-+	res = __retu_read_reg(retu, RETU_REG_ADCR) & 0x3ff;
-+
-+	if (retu->is_vilma)
-+		__retu_write_reg(retu, RETU_REG_ADCR, (1 << 13));
-+
-+	/* Unlock retu */
-+	mutex_unlock(&retu->mutex);
-+
-+	return res;
-+}
-+EXPORT_SYMBOL_GPL(retu_read_adc);
-+
-+static irqreturn_t retu_irq_handler(int irq, void *_retu)
-+{
-+	struct retu		*retu = _retu;
-+
-+	u16			idr;
-+	u16			imr;
-+
-+	mutex_lock(&retu->mutex);
-+	idr = __retu_read_reg(retu, RETU_REG_IDR);
-+	imr = __retu_read_reg(retu, RETU_REG_IMR);
-+	mutex_unlock(&retu->mutex);
-+
-+	idr &= ~imr;
-+	if (!idr) {
-+		dev_vdbg(retu->dev, "No IRQ, spurious?\n");
-+		return IRQ_NONE;
-+	}
-+
-+	while (idr) {
-+		unsigned long	pending = __ffs(idr);
-+		unsigned int	irq;
-+
-+		idr &= ~BIT(pending);
-+		irq = pending + retu->irq_base;
-+		handle_nested_irq(irq);
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+
-+/* -------------------------------------------------------------------------- */
-+
-+static void retu_irq_mask(struct irq_data *data)
-+{
-+	struct retu		*retu = irq_data_get_irq_chip_data(data);
-+	int			irq = data->irq;
-+
-+	retu->mask |= (1 << (irq - retu->irq_base));
-+	retu->mask_pending = true;
-+}
-+
-+static void retu_irq_unmask(struct irq_data *data)
-+{
-+	struct retu		*retu = irq_data_get_irq_chip_data(data);
-+	int			irq = data->irq;
-+
-+	retu->mask &= ~(1 << (irq - retu->irq_base));
-+	retu->mask_pending = true;
-+
-+}
-+
-+static void retu_irq_ack(struct irq_data *data)
-+{
-+	struct retu		*retu = irq_data_get_irq_chip_data(data);
-+	int			irq = data->irq;
-+
-+	retu->ack |= (1 << (irq - retu->irq_base));
-+	retu->ack_pending = true;
-+}
-+
-+static void retu_bus_lock(struct irq_data *data)
-+{
-+	struct retu		*retu = irq_data_get_irq_chip_data(data);
-+
-+	mutex_lock(&retu->mutex);
-+}
-+
-+static void retu_bus_sync_unlock(struct irq_data *data)
-+{
-+	struct retu		*retu = irq_data_get_irq_chip_data(data);
-+
-+	if (retu->mask_pending) {
-+		__retu_write_reg(retu, RETU_REG_IMR, retu->mask);
-+		retu->mask_pending = false;
-+	}
-+
-+	if (retu->ack_pending) {
-+		__retu_write_reg(retu, RETU_REG_IDR, retu->ack);
-+		retu->ack_pending = false;
-+	}
-+
-+	mutex_unlock(&retu->mutex);
-+}
-+
-+static struct irq_chip retu_irq_chip = {
-+	.name			= "retu",
-+	.irq_bus_lock		= retu_bus_lock,
-+	.irq_bus_sync_unlock	= retu_bus_sync_unlock,
-+	.irq_mask		= retu_irq_mask,
-+	.irq_unmask		= retu_irq_unmask,
-+	.irq_ack		= retu_irq_ack,
-+};
-+
-+static inline void retu_irq_setup(int irq)
-+{
-+#ifdef CONFIG_ARM
-+	set_irq_flags(irq, IRQF_VALID);
-+#else
-+	irq_set_noprobe(irq);
-+#endif
-+}
-+
-+static void retu_irq_init(struct retu *retu)
-+{
-+	int			base = retu->irq_base;
-+	int			end = retu->irq_end;
-+	int			irq;
-+
-+	for (irq = base; irq < end; irq++) {
-+		irq_set_chip_data(irq, retu);
-+		irq_set_chip_and_handler(irq, &retu_irq_chip,
-+				handle_simple_irq);
-+		irq_set_nested_thread(irq, 1);
-+		retu_irq_setup(irq);
-+	}
-+}
-+
-+static void retu_irq_exit(struct retu *retu)
-+{
-+	int			base = retu->irq_base;
-+	int			end = retu->irq_end;
-+	int			irq;
-+
-+	for (irq = base; irq < end; irq++) {
-+#ifdef CONFIG_ARM
-+		set_irq_flags(irq, 0);
-+#endif
-+		irq_set_chip_and_handler(irq, NULL, NULL);
-+		irq_set_chip_data(irq, NULL);
-+	}
-+}
-+
-+/* -------------------------------------------------------------------------- */
-+
-+/**
-+ * retu_power_off - Shut down power to system
-+ *
-+ * This function puts the system in power off state
-+ */
-+static void retu_power_off(void)
-+{
-+	struct retu		*retu = the_retu;
-+	unsigned		reg;
-+
-+	reg = __retu_read_reg(retu, RETU_REG_CC1);
-+
-+	/* Ignore power button state */
-+	__retu_write_reg(retu, RETU_REG_CC1, reg | 2);
-+	/* Expire watchdog immediately */
-+	__retu_write_reg(retu, RETU_REG_WATCHDOG, 0);
-+	/* Wait for poweroff*/
-+	for (;;);
-+}
-+
-+static struct resource generic_resources[] = {
-+	{
-+		.start	= -EINVAL,	/* fixed later */
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+	{
-+		.start	= -EINVAL,	/* fixed later */
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+/**
-+ * retu_allocate_child - Allocates one Retu child
-+ * @name: name of new child
-+ * @parent: parent device for this child
-+ */
-+static struct device *retu_allocate_child(char *name, struct device *parent,
-+		int irq_base, int irq1, int irq2, int num)
-+{
-+	struct platform_device		*pdev;
-+	int				status;
-+
-+	pdev = platform_device_alloc(name, -1);
-+	if (!pdev) {
-+		dev_dbg(parent, "can't allocate %s\n", name);
-+		goto err;
-+	}
-+
-+	pdev->dev.parent = parent;
-+
-+	if (num) {
-+		generic_resources[0].start = irq_base + irq1;
-+		generic_resources[1].start = irq_base + irq2;
-+
-+		status = platform_device_add_resources(pdev,
-+				generic_resources, num);
-+		if (status < 0) {
-+			dev_dbg(parent, "can't add resources to %s\n", name);
-+			goto err;
-+		}
-+	}
-+
-+	status = platform_device_add(pdev);
-+	if (status < 0) {
-+		dev_dbg(parent, "can't add %s\n", name);
-+		goto err;
-+	}
-+
-+	return &pdev->dev;
-+
-+err:
-+	platform_device_put(pdev);
-+
-+	return NULL;
-+}
-+
-+/**
-+ * retu_allocate_children - Allocates Retu's children
-+ */
-+static int retu_allocate_children(struct device *parent, int irq_base)
-+{
-+	struct device	*child;
-+
-+	child = retu_allocate_child("retu-pwrbutton", parent, irq_base,
-+			RETU_INT_PWR, -1, 1);
-+	if (!child)
-+		return -ENOMEM;
-+
-+	child = retu_allocate_child("retu-headset", parent, irq_base,
-+			RETU_INT_HOOK, -1, 1);
-+	if (!child)
-+		return -ENOMEM;
-+
-+	child = retu_allocate_child("retu-rtc", parent, irq_base,
-+			RETU_INT_RTCS, RETU_INT_RTCA, 2);
-+	if (!child)
-+		return -ENOMEM;
-+
-+	child = retu_allocate_child("retu-wdt", parent, -1, -1, -1, 0);
-+	if (!child)
-+		return -ENOMEM;
-+
-+	return 0;
-+}
-+
-+/**
-+ * retu_probe - Probe for Retu ASIC
-+ * @dev: the Retu device
-+ *
-+ * Probe for the Retu ASIC and allocate memory
-+ * for its device-struct if found
-+ */
-+static int __devinit retu_probe(struct platform_device *pdev)
-+{
-+	struct retu	*retu;
-+	struct cbus_retu_platform_data *pdata = pdev->dev.platform_data;
-+
-+	int		ret = -ENOMEM;
-+	int		rev;
-+
-+	retu = kzalloc(sizeof(*retu), GFP_KERNEL);
-+	if (!retu) {
-+		dev_err(&pdev->dev, "not enough memory\n");
-+		goto err0;
-+	}
-+
-+	platform_set_drvdata(pdev, retu);
-+
-+	ret = irq_alloc_descs(-1, 0, MAX_RETU_IRQ_HANDLERS, 0);
-+	if (ret < 0) {
-+		dev_err(&pdev->dev, "failed to allocate IRQ descs\n");
-+		goto err1;
-+	}
-+
-+	retu->irq	= platform_get_irq(pdev, 0);
-+	retu->irq_base	= ret;
-+	retu->irq_end	= ret + MAX_RETU_IRQ_HANDLERS;
-+	retu->devid	= pdata->devid;
-+	retu->dev	= &pdev->dev;
-+	the_retu	= retu;
-+
-+	mutex_init(&retu->mutex);
-+
-+	retu_irq_init(retu);
-+
-+	rev = __retu_read_reg(retu, RETU_REG_ASICR) & 0xff;
-+	if (rev & (1 << 7))
-+		retu->is_vilma = true;
-+
-+	dev_info(&pdev->dev, "%s v%d.%d found\n",
-+			retu->is_vilma ? "Vilma" : "Retu",
-+			(rev >> 4) & 0x07, rev & 0x0f);
-+
-+	/* Mask all RETU interrupts */
-+	__retu_write_reg(retu, RETU_REG_IMR, 0xffff);
-+
-+	ret = request_threaded_irq(retu->irq, NULL, retu_irq_handler,
-+			IRQF_ONESHOT, "retu", retu);
-+	if (ret < 0) {
-+		dev_err(&pdev->dev, "Unable to register IRQ handler\n");
-+		goto err2;
-+	}
-+
-+	irq_set_irq_wake(retu->irq, 1);
-+
-+	/* Register power off function */
-+	pm_power_off = retu_power_off;
-+
-+	ret = retu_allocate_children(&pdev->dev, retu->irq_base);
-+	if (ret < 0) {
-+		dev_err(&pdev->dev, "Unable to allocate Retu children\n");
-+		goto err3;
-+	}
-+
-+	return 0;
-+
-+err3:
-+	pm_power_off = NULL;
-+	free_irq(retu->irq, retu);
-+
-+err2:
-+	retu_irq_exit(retu);
-+	irq_free_descs(retu->irq_base, MAX_RETU_IRQ_HANDLERS);
-+
-+err1:
-+	kfree(retu);
-+	the_retu = NULL;
-+
-+err0:
-+	return ret;
-+}
-+
-+static int __devexit retu_remove(struct platform_device *pdev)
-+{
-+	struct retu		*retu = platform_get_drvdata(pdev);
-+
-+	pm_power_off = NULL;
-+	the_retu = NULL;
-+
-+	free_irq(retu->irq, retu);
-+	retu_irq_exit(retu);
-+	irq_free_descs(retu->irq_base, MAX_RETU_IRQ_HANDLERS);
-+	kfree(retu);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver retu_driver = {
-+	.probe		= retu_probe,
-+	.remove		= __devexit_p(retu_remove),
-+	.driver		= {
-+		.name	= "retu",
-+	},
-+};
-+
-+static int __init retu_init(void)
-+{
-+	return platform_driver_register(&retu_driver);
-+}
-+subsys_initcall(retu_init);
-+
-+static void __exit retu_exit(void)
-+{
-+	platform_driver_unregister(&retu_driver);
-+}
-+module_exit(retu_exit);
-+
-+MODULE_DESCRIPTION("Retu ASIC control");
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Juha Yrjölä");
-+MODULE_AUTHOR("David Weinehall");
-+MODULE_AUTHOR("Mikko Ylinen");
---- /dev/null
-+++ b/drivers/cbus/retu.h
-@@ -0,0 +1,85 @@
-+/**
-+ * drivers/cbus/retu.h
-+ *
-+ * Copyright (C) 2004, 2005 Nokia Corporation
-+ *
-+ * Written by Juha Yrjölä <juha.yrjola@nokia.com> and
-+ *	      David Weinehall <david.weinehall@nokia.com>
-+ *
-+ * This file is subject to the terms and conditions of the GNU General
-+ * Public License. See the file "COPYING" in the main directory of this
-+ * archive for more details.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#ifndef __DRIVERS_CBUS_RETU_H
-+#define __DRIVERS_CBUS_RETU_H
-+
-+#include <linux/types.h>
-+
-+/* Registers */
-+#define RETU_REG_ASICR		0x00	/* ASIC ID & revision */
-+#define RETU_REG_IDR		0x01	/* Interrupt ID */
-+#define RETU_REG_IMR		0x02	/* Interrupt mask */
-+#define RETU_REG_RTCDSR		0x03	/* RTC seconds register */
-+#define RETU_REG_RTCHMR		0x04	/* RTC hours and minutes register */
-+#define RETU_REG_RTCHMAR	0x05	/* RTC hours and minutes alarm and time set register */
-+#define RETU_REG_RTCCALR	0x06	/* RTC calibration register */
-+#define RETU_REG_ADCR		0x08	/* ADC result */
-+#define RETU_REG_ADCSCR		0x09	/* ADC sample ctrl */
-+#define RETU_REG_CC1		0x0d	/* Common control register 1 */
-+#define RETU_REG_CC2		0x0e	/* Common control register 2 */
-+#define RETU_REG_CTRL_CLR	0x0f	/* Regulator clear register */
-+#define RETU_REG_CTRL_SET	0x10	/* Regulator set register */
-+#define RETU_REG_STATUS		0x16	/* Status register */
-+#define  RETU_REG_STATUS_BATAVAIL	0x0100 /* Battery available */
-+#define  RETU_REG_STATUS_CHGPLUG	0x1000 /* Charger is plugged in */
-+#define RETU_REG_WATCHDOG	0x17	/* Watchdog register */
-+#define RETU_REG_AUDTXR		0x18	/* Audio Codec Tx register */
-+#define RETU_REG_MAX		0x1f
-+
-+/* Interrupt sources */
-+#define RETU_INT_PWR		0
-+#define RETU_INT_CHAR		1
-+#define RETU_INT_RTCS		2
-+#define RETU_INT_RTCM		3
-+#define RETU_INT_RTCD		4
-+#define RETU_INT_RTCA		5
-+#define RETU_INT_HOOK		6
-+#define RETU_INT_HEAD		7
-+#define RETU_INT_ADCS		8
-+
-+#define	MAX_RETU_IRQ_HANDLERS	16
-+
-+/* ADC channels */
-+#define RETU_ADC_GND		0x00 /* Ground */
-+#define RETU_ADC_BSI		0x01 /* Battery Size Indicator */
-+#define RETU_ADC_BATTEMP	0x02 /* Battery temperature */
-+#define RETU_ADC_CHGVOLT	0x03 /* Charger voltage */
-+#define RETU_ADC_HEADSET	0x04 /* Headset detection */
-+#define RETU_ADC_HOOKDET	0x05 /* Hook detection */
-+#define RETU_ADC_RFGP		0x06 /* RF GP */
-+#define RETU_ADC_WBTX		0x07 /* Wideband Tx detection */
-+#define RETU_ADC_BATTVOLT	0x08 /* Battery voltage measurement */
-+#define RETU_ADC_GND2		0x09 /* Ground */
-+#define RETU_ADC_LIGHTSENS	0x0A /* Light sensor */
-+#define RETU_ADC_LIGHTTEMP	0x0B /* Light sensor temperature */
-+#define RETU_ADC_BKUPVOLT	0x0C /* Backup battery voltage */
-+#define RETU_ADC_TEMP		0x0D /* RETU temperature */
-+
-+
-+int retu_read_reg(struct device *child, unsigned reg);
-+void retu_write_reg(struct device *child, unsigned reg, u16 val);
-+void retu_set_clear_reg_bits(struct device *child, unsigned reg, u16 set,
-+		u16 clear);
-+int retu_read_adc(struct device *child, int channel);
-+
-+#endif /* __DRIVERS_CBUS_RETU_H */
---- /dev/null
-+++ b/drivers/cbus/retu-headset.c
-@@ -0,0 +1,359 @@
-+/**
-+ * Retu/Vilma headset detection
-+ *
-+ * Copyright (C) 2006 Nokia Corporation
-+ *
-+ * Written by Juha Yrjölä
-+ *
-+ * This file is subject to the terms and conditions of the GNU General
-+ * Public License. See the file "COPYING" in the main directory of this
-+ * archive for more details.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/irq.h>
-+#include <linux/interrupt.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+#include <linux/input.h>
-+#include <linux/platform_device.h>
-+
-+#include "retu.h"
-+
-+#define RETU_ADC_CHANNEL_HOOKDET	0x05
-+
-+#define RETU_HEADSET_KEY		KEY_PHONE
-+
-+struct retu_headset {
-+	spinlock_t			lock;
-+	struct mutex			mutex;
-+	struct device			*dev;
-+	struct input_dev		*idev;
-+	unsigned			bias_enabled;
-+	unsigned			detection_enabled;
-+	unsigned			pressed;
-+	struct timer_list		enable_timer;
-+	struct timer_list		detect_timer;
-+	int				irq;
-+};
-+
-+static void retu_headset_set_bias(struct retu_headset *hs, int enable)
-+{
-+	if (enable) {
-+		retu_set_clear_reg_bits(hs->dev, RETU_REG_AUDTXR,
-+					(1 << 0) | (1 << 1), 0);
-+		msleep(2);
-+		retu_set_clear_reg_bits(hs->dev, RETU_REG_AUDTXR,
-+				1 << 3, 0);
-+	} else {
-+		retu_set_clear_reg_bits(hs->dev, RETU_REG_AUDTXR, 0,
-+					(1 << 0) | (1 << 1) | (1 << 3));
-+	}
-+}
-+
-+static void retu_headset_enable(struct retu_headset *hs)
-+{
-+	mutex_lock(&hs->mutex);
-+	if (!hs->bias_enabled) {
-+		hs->bias_enabled = 1;
-+		retu_headset_set_bias(hs, 1);
-+	}
-+	mutex_unlock(&hs->mutex);
-+}
-+
-+static void retu_headset_disable(struct retu_headset *hs)
-+{
-+	mutex_lock(&hs->mutex);
-+	if (hs->bias_enabled) {
-+		hs->bias_enabled = 0;
-+		retu_headset_set_bias(hs, 0);
-+	}
-+	mutex_unlock(&hs->mutex);
-+}
-+
-+static void retu_headset_det_enable(struct retu_headset *hs)
-+{
-+	mutex_lock(&hs->mutex);
-+	if (!hs->detection_enabled) {
-+		hs->detection_enabled = 1;
-+		retu_set_clear_reg_bits(hs->dev, RETU_REG_CC1,
-+				(1 << 10) | (1 << 8), 0);
-+	}
-+	mutex_unlock(&hs->mutex);
-+}
-+
-+static void retu_headset_det_disable(struct retu_headset *hs)
-+{
-+	unsigned long flags;
-+
-+	mutex_lock(&hs->mutex);
-+	if (hs->detection_enabled) {
-+		hs->detection_enabled = 0;
-+		del_timer_sync(&hs->enable_timer);
-+		del_timer_sync(&hs->detect_timer);
-+		spin_lock_irqsave(&hs->lock, flags);
-+		if (hs->pressed)
-+			input_report_key(hs->idev, RETU_HEADSET_KEY, 0);
-+		spin_unlock_irqrestore(&hs->lock, flags);
-+		retu_set_clear_reg_bits(hs->dev, RETU_REG_CC1, 0,
-+				(1 << 10) | (1 << 8));
-+	}
-+	mutex_unlock(&hs->mutex);
-+}
-+
-+static ssize_t retu_headset_hookdet_show(struct device *dev,
-+					 struct device_attribute *attr,
-+					 char *buf)
-+{
-+	int val;
-+
-+	val = retu_read_adc(dev, RETU_ADC_CHANNEL_HOOKDET);
-+	return sprintf(buf, "%d\n", val);
-+}
-+
-+static DEVICE_ATTR(hookdet, S_IRUGO, retu_headset_hookdet_show, NULL);
-+
-+static ssize_t retu_headset_enable_show(struct device *dev,
-+					struct device_attribute *attr,
-+					char *buf)
-+{
-+	struct retu_headset *hs = dev_get_drvdata(dev);
-+
-+	return sprintf(buf, "%u\n", hs->bias_enabled);
-+}
-+
-+static ssize_t retu_headset_enable_store(struct device *dev,
-+					 struct device_attribute *attr,
-+					 const char *buf, size_t count)
-+{
-+	struct retu_headset *hs = dev_get_drvdata(dev);
-+	int enable;
-+
-+	if (sscanf(buf, "%u", &enable) != 1)
-+		return -EINVAL;
-+	if (enable)
-+		retu_headset_enable(hs);
-+	else
-+	        retu_headset_disable(hs);
-+	return count;
-+}
-+
-+static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR | S_IWGRP,
-+		   retu_headset_enable_show, retu_headset_enable_store);
-+
-+static ssize_t retu_headset_enable_det_show(struct device *dev,
-+					    struct device_attribute *attr,
-+					    char *buf)
-+{
-+	struct retu_headset *hs = dev_get_drvdata(dev);
-+
-+	return sprintf(buf, "%u\n", hs->detection_enabled);
-+}
-+
-+static ssize_t retu_headset_enable_det_store(struct device *dev,
-+					     struct device_attribute *attr,
-+					     const char *buf, size_t count)
-+{
-+	struct retu_headset *hs = dev_get_drvdata(dev);
-+	int enable;
-+
-+	if (sscanf(buf, "%u", &enable) != 1)
-+		return -EINVAL;
-+	if (enable)
-+		retu_headset_det_enable(hs);
-+	else
-+	        retu_headset_det_disable(hs);
-+	return count;
-+}
-+
-+static DEVICE_ATTR(enable_det, S_IRUGO | S_IWUSR | S_IWGRP,
-+		   retu_headset_enable_det_show,
-+		   retu_headset_enable_det_store);
-+
-+static irqreturn_t retu_headset_hook_interrupt(int irq, void *_hs)
-+{
-+	struct retu_headset	*hs = _hs;
-+	unsigned long		flags;
-+
-+	spin_lock_irqsave(&hs->lock, flags);
-+	if (!hs->pressed) {
-+		/* Headset button was just pressed down. */
-+		hs->pressed = 1;
-+		input_report_key(hs->idev, RETU_HEADSET_KEY, 1);
-+	}
-+	spin_unlock_irqrestore(&hs->lock, flags);
-+	retu_set_clear_reg_bits(hs->dev, RETU_REG_CC1, 0,
-+			(1 << 10) | (1 << 8));
-+	mod_timer(&hs->enable_timer, jiffies + msecs_to_jiffies(50));
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static void retu_headset_enable_timer(unsigned long arg)
-+{
-+	struct retu_headset *hs = (struct retu_headset *) arg;
-+
-+	retu_set_clear_reg_bits(hs->dev, RETU_REG_CC1,
-+			(1 << 10) | (1 << 8), 0);
-+	mod_timer(&hs->detect_timer, jiffies + msecs_to_jiffies(350));
-+}
-+
-+static void retu_headset_detect_timer(unsigned long arg)
-+{
-+	struct retu_headset *hs = (struct retu_headset *) arg;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&hs->lock, flags);
-+	if (hs->pressed) {
-+		hs->pressed = 0;
-+		input_report_key(hs->idev, RETU_HEADSET_KEY, 0);
-+	}
-+	spin_unlock_irqrestore(&hs->lock, flags);
-+}
-+
-+static int __init retu_headset_probe(struct platform_device *pdev)
-+{
-+	struct retu_headset *hs;
-+	int irq;
-+	int r;
-+
-+	hs = kzalloc(sizeof(*hs), GFP_KERNEL);
-+	if (hs == NULL)
-+		return -ENOMEM;
-+
-+	hs->dev = &pdev->dev;
-+
-+	hs->idev = input_allocate_device();
-+	if (hs->idev == NULL) {
-+		r = -ENOMEM;
-+		goto err1;
-+	}
-+	hs->idev->name = "retu-headset";
-+	hs->idev->dev.parent = &pdev->dev;
-+	set_bit(EV_KEY, hs->idev->evbit);
-+	set_bit(RETU_HEADSET_KEY, hs->idev->keybit);
-+	r = input_register_device(hs->idev);
-+	if (r < 0)
-+		goto err2;
-+
-+	r = device_create_file(&pdev->dev, &dev_attr_hookdet);
-+	if (r < 0)
-+		goto err3;
-+	r = device_create_file(&pdev->dev, &dev_attr_enable);
-+	if (r < 0)
-+		goto err4;
-+	r = device_create_file(&pdev->dev, &dev_attr_enable_det);
-+	if (r < 0)
-+		goto err5;
-+	platform_set_drvdata(pdev, hs);
-+
-+	spin_lock_init(&hs->lock);
-+	mutex_init(&hs->mutex);
-+	setup_timer(&hs->enable_timer, retu_headset_enable_timer,
-+		    (unsigned long) hs);
-+	setup_timer(&hs->detect_timer, retu_headset_detect_timer,
-+		    (unsigned long) hs);
-+
-+	irq = platform_get_irq(pdev, 0);
-+	hs->irq = irq;
-+
-+	r = request_threaded_irq(irq, NULL, retu_headset_hook_interrupt, 0,
-+			"hookdet", hs);
-+	if (r != 0) {
-+		dev_err(&pdev->dev, "hookdet IRQ not available\n");
-+		goto err6;
-+	}
-+
-+	return 0;
-+err6:
-+	device_remove_file(&pdev->dev, &dev_attr_enable_det);
-+err5:
-+	device_remove_file(&pdev->dev, &dev_attr_enable);
-+err4:
-+	device_remove_file(&pdev->dev, &dev_attr_hookdet);
-+err3:
-+	input_unregister_device(hs->idev);
-+err2:
-+	input_free_device(hs->idev);
-+err1:
-+	kfree(hs);
-+	return r;
-+}
-+
-+static int retu_headset_remove(struct platform_device *pdev)
-+{
-+	struct retu_headset *hs = platform_get_drvdata(pdev);
-+
-+	device_remove_file(&pdev->dev, &dev_attr_hookdet);
-+	device_remove_file(&pdev->dev, &dev_attr_enable);
-+	device_remove_file(&pdev->dev, &dev_attr_enable_det);
-+	retu_headset_disable(hs);
-+	retu_headset_det_disable(hs);
-+	free_irq(hs->irq, hs);
-+	input_unregister_device(hs->idev);
-+	input_free_device(hs->idev);
-+
-+	return 0;
-+}
-+
-+static int retu_headset_suspend(struct platform_device *pdev,
-+				pm_message_t mesg)
-+{
-+	struct retu_headset *hs = platform_get_drvdata(pdev);
-+
-+	mutex_lock(&hs->mutex);
-+	if (hs->bias_enabled)
-+		retu_headset_set_bias(hs, 0);
-+	mutex_unlock(&hs->mutex);
-+
-+	return 0;
-+}
-+
-+static int retu_headset_resume(struct platform_device *pdev)
-+{
-+	struct retu_headset *hs = platform_get_drvdata(pdev);
-+
-+	mutex_lock(&hs->mutex);
-+	if (hs->bias_enabled)
-+		retu_headset_set_bias(hs, 1);
-+	mutex_unlock(&hs->mutex);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver retu_headset_driver = {
-+	.remove		= retu_headset_remove,
-+	.suspend	= retu_headset_suspend,
-+	.resume		= retu_headset_resume,
-+	.driver		= {
-+		.name	= "retu-headset",
-+	},
-+};
-+
-+static int __init retu_headset_init(void)
-+{
-+	return platform_driver_probe(&retu_headset_driver, retu_headset_probe);
-+}
-+
-+static void __exit retu_headset_exit(void)
-+{
-+	platform_driver_unregister(&retu_headset_driver);
-+}
-+
-+module_init(retu_headset_init);
-+module_exit(retu_headset_exit);
-+
-+MODULE_DESCRIPTION("Retu/Vilma headset detection");
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Juha Yrjölä");
---- /dev/null
-+++ b/drivers/cbus/retu-pwrbutton.c
-@@ -0,0 +1,165 @@
-+/**
-+ * drivers/cbus/retu-pwrbutton.c
-+ *
-+ * Driver for sending retu power button event to input-layer
-+ *
-+ * Copyright (C) 2004-2010 Nokia Corporation
-+ *
-+ * Written by
-+ *	Ari Saastamoinen <ari.saastamoinen@elektrobit.com>
-+ *	Juha Yrjola <juha.yrjola@solidboot.com>
-+ *
-+ * Contact: Felipe Balbi <felipe.balbi@nokia.com>
-+ *
-+ * This file is subject to the terms and conditions of the GNU General
-+ * Public License. See the file "COPYING" in the main directory of this
-+ * archive for more details.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/input.h>
-+#include <linux/jiffies.h>
-+#include <linux/bitops.h>
-+#include <linux/irq.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+
-+#include "retu.h"
-+
-+#define RETU_STATUS_PWRONX	(1 << 5)
-+
-+#define PWRBTN_DELAY		20
-+#define PWRBTN_UP		0
-+#define PWRBTN_PRESSED		1
-+
-+struct retu_pwrbutton {
-+	struct input_dev	*idev;
-+	struct device		*dev;
-+
-+	int			state;
-+	int			irq;
-+};
-+
-+static irqreturn_t retubutton_irq(int irq, void *_pwr)
-+{
-+	struct retu_pwrbutton *pwr = _pwr;
-+	int state;
-+
-+	if (retu_read_reg(pwr->dev, RETU_REG_STATUS) & RETU_STATUS_PWRONX)
-+		state = PWRBTN_UP;
-+	else
-+		state = PWRBTN_PRESSED;
-+
-+	if (pwr->state != state) {
-+		input_report_key(pwr->idev, KEY_POWER, state);
-+		input_sync(pwr->idev);
-+		pwr->state = state;
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int __init retubutton_probe(struct platform_device *pdev)
-+{
-+	struct retu_pwrbutton		*pwr;
-+	int				ret = 0;
-+
-+	pwr = kzalloc(sizeof(*pwr), GFP_KERNEL);
-+	if (!pwr) {
-+		dev_err(&pdev->dev, "not enough memory\n");
-+		ret = -ENOMEM;
-+		goto err0;
-+	}
-+
-+	pwr->dev = &pdev->dev;
-+	pwr->irq = platform_get_irq(pdev, 0);
-+	platform_set_drvdata(pdev, pwr);
-+
-+	ret = request_threaded_irq(pwr->irq, NULL, retubutton_irq, 0,
-+			"retu-pwrbutton", pwr);
-+	if (ret < 0) {
-+		dev_err(&pdev->dev, "Cannot allocate irq\n");
-+		goto err1;
-+	}
-+
-+	pwr->idev = input_allocate_device();
-+	if (!pwr->idev) {
-+		dev_err(&pdev->dev, "can't allocate input device\n");
-+		ret = -ENOMEM;
-+		goto err2;
-+	}
-+
-+	pwr->idev->evbit[0] = BIT_MASK(EV_KEY);
-+	pwr->idev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
-+	pwr->idev->name = "retu-pwrbutton";
-+
-+	ret = input_register_device(pwr->idev);
-+	if (ret < 0) {
-+		dev_err(&pdev->dev, "failed to register input device\n");
-+		goto err3;
-+	}
-+
-+	return 0;
-+
-+err3:
-+	input_free_device(pwr->idev);
-+
-+err2:
-+	free_irq(pwr->irq, pwr);
-+
-+err1:
-+	kfree(pwr);
-+
-+err0:
-+	return ret;
-+}
-+
-+static int __exit retubutton_remove(struct platform_device *pdev)
-+{
-+	struct retu_pwrbutton		*pwr = platform_get_drvdata(pdev);
-+
-+	free_irq(pwr->irq, pwr);
-+	input_unregister_device(pwr->idev);
-+	input_free_device(pwr->idev);
-+	kfree(pwr);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver retu_pwrbutton_driver = {
-+	.remove		= __exit_p(retubutton_remove),
-+	.driver		= {
-+		.name	= "retu-pwrbutton",
-+	},
-+};
-+
-+static int __init retubutton_init(void)
-+{
-+	return platform_driver_probe(&retu_pwrbutton_driver, retubutton_probe);
-+}
-+module_init(retubutton_init);
-+
-+static void __exit retubutton_exit(void)
-+{
-+	platform_driver_unregister(&retu_pwrbutton_driver);
-+}
-+module_exit(retubutton_exit);
-+
-+MODULE_DESCRIPTION("Retu Power Button");
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Ari Saastamoinen");
-+MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
-+
---- /dev/null
-+++ b/drivers/cbus/retu-rtc.c
-@@ -0,0 +1,287 @@
-+/**
-+ * drivers/cbus/retu-rtc.c
-+ *
-+ * Support for Retu RTC
-+ *
-+ * Copyright (C) 2004, 2005 Nokia Corporation
-+ *
-+ * Written by Paul Mundt <paul.mundt@nokia.com> and
-+ *            Igor Stoppa <igor.stoppa@nokia.com>
-+ *
-+ * The Retu RTC is essentially a partial read-only RTC that gives us Retu's
-+ * idea of what time actually is. It's left as a userspace excercise to map
-+ * this back to time in the real world and ensure that calibration settings
-+ * are sane to compensate for any horrible drift (on account of not being able
-+ * to set the clock to anything).
-+ *
-+ * Days are semi-writeable. Namely, Retu will only track 255 days for us
-+ * consecutively, after which the counter is explicitly stuck at 255 until
-+ * someone comes along and clears it with a write. In the event that no one
-+ * comes along and clears it, we no longer have any idea what day it is.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General
-+ * Public License. See the file "COPYING" in the main directory of this
-+ * archive for more details.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/mutex.h>
-+#include <linux/rtc.h>
-+
-+#include "cbus.h"
-+#include "retu.h"
-+
-+struct retu_rtc {
-+	/* device lock */
-+	struct mutex		mutex;
-+	struct device		*dev;
-+	struct rtc_device	*rtc;
-+
-+	u16			alarm_expired;
-+	int			irq_rtcs;
-+	int			irq_rtca;
-+};
-+
-+static void retu_rtc_do_reset(struct retu_rtc *rtc)
-+{
-+	u16 ccr1;
-+
-+	ccr1 = retu_read_reg(rtc->dev, RETU_REG_CC1);
-+	/* RTC in reset */
-+	retu_write_reg(rtc->dev, RETU_REG_CC1, ccr1 | 0x0001);
-+	/* RTC in normal operating mode */
-+	retu_write_reg(rtc->dev, RETU_REG_CC1, ccr1 & ~0x0001);
-+
-+	/* Disable alarm and RTC WD */
-+	retu_write_reg(rtc->dev, RETU_REG_RTCHMAR, 0x7f3f);
-+	/* Set Calibration register to default value */
-+	retu_write_reg(rtc->dev, RETU_REG_RTCCALR, 0x00c0);
-+
-+	rtc->alarm_expired = 0;
-+}
-+
-+static irqreturn_t retu_rtc_interrupt(int irq, void *_rtc)
-+{
-+	struct retu_rtc		*rtc = _rtc;
-+
-+	mutex_lock(&rtc->mutex);
-+	rtc->alarm_expired = 1;
-+	retu_write_reg(rtc->dev, RETU_REG_RTCHMAR, (24 << 8) | 60);
-+	mutex_unlock(&rtc->mutex);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int retu_rtc_init_irq(struct retu_rtc *rtc)
-+{
-+	int irq;
-+	int ret;
-+
-+	irq = platform_get_irq(to_platform_device(rtc->dev), 0);
-+	rtc->irq_rtcs = irq;
-+
-+	irq = platform_get_irq(to_platform_device(rtc->dev), 1);
-+	rtc->irq_rtca = irq;
-+
-+	ret = request_threaded_irq(rtc->irq_rtcs, NULL, retu_rtc_interrupt,
-+			0, "RTCS", rtc);
-+	if (ret != 0)
-+		return ret;
-+
-+	ret = request_threaded_irq(rtc->irq_rtca, NULL, retu_rtc_interrupt,
-+			0, "RTCA", rtc);
-+	if (ret != 0) {
-+		free_irq(rtc->irq_rtcs, rtc);
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+static int retu_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
-+{
-+	struct retu_rtc		*rtc = dev_get_drvdata(dev);
-+	u16			chmar;
-+
-+	mutex_lock(&rtc->mutex);
-+
-+	chmar = ((alm->time.tm_hour & 0x1f) << 8) | (alm->time.tm_min & 0x3f);
-+	retu_write_reg(rtc->dev, RETU_REG_RTCHMAR, chmar);
-+
-+	mutex_unlock(&rtc->mutex);
-+
-+	return 0;
-+}
-+
-+static int retu_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
-+{
-+	struct retu_rtc		*rtc = dev_get_drvdata(dev);
-+	u16			chmar;
-+
-+	mutex_lock(&rtc->mutex);
-+
-+	chmar = retu_read_reg(rtc->dev, RETU_REG_RTCHMAR);
-+
-+	alm->time.tm_hour	= (chmar >> 8) & 0x1f;
-+	alm->time.tm_min	= chmar & 0x3f;
-+	alm->enabled		= !!rtc->alarm_expired;
-+
-+	mutex_unlock(&rtc->mutex);
-+
-+	return 0;
-+}
-+
-+static int retu_rtc_set_time(struct device *dev, struct rtc_time *tm)
-+{
-+	struct retu_rtc		*rtc = dev_get_drvdata(dev);
-+	u16			dsr;
-+	u16			hmr;
-+
-+	dsr = ((tm->tm_mday & 0xff) << 8) | (tm->tm_hour & 0xff);
-+	hmr = ((tm->tm_min & 0xff) << 8) | (tm->tm_sec & 0xff);
-+
-+	mutex_lock(&rtc->mutex);
-+
-+	retu_write_reg(rtc->dev, RETU_REG_RTCDSR, dsr);
-+	retu_write_reg(rtc->dev, RETU_REG_RTCHMR, hmr);
-+
-+	mutex_unlock(&rtc->mutex);
-+
-+	return 0;
-+}
-+
-+static int retu_rtc_read_time(struct device *dev, struct rtc_time *tm)
-+{
-+	struct retu_rtc		*rtc = dev_get_drvdata(dev);
-+	u16			dsr;
-+	u16			hmr;
-+
-+	/*
-+	 * DSR holds days and hours
-+	 * HMR hols minutes and seconds
-+	 *
-+	 * both are 16 bit registers with 8-bit for each field.
-+	 */
-+
-+	mutex_lock(&rtc->mutex);
-+
-+	dsr	= retu_read_reg(rtc->dev, RETU_REG_RTCDSR);
-+	hmr	= retu_read_reg(rtc->dev, RETU_REG_RTCHMR);
-+
-+	tm->tm_sec	= hmr & 0xff;
-+	tm->tm_min	= hmr >> 8;
-+	tm->tm_hour	= dsr & 0xff;
-+	tm->tm_mday	= dsr >> 8;
-+
-+	mutex_unlock(&rtc->mutex);
-+
-+	return 0;
-+}
-+
-+static struct rtc_class_ops retu_rtc_ops = {
-+	.read_time		= retu_rtc_read_time,
-+	.set_time		= retu_rtc_set_time,
-+	.read_alarm		= retu_rtc_read_alarm,
-+	.set_alarm		= retu_rtc_set_alarm,
-+};
-+
-+static int __init retu_rtc_probe(struct platform_device *pdev)
-+{
-+	struct retu_rtc		*rtc;
-+	int			r;
-+
-+	rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
-+	if (!rtc) {
-+		dev_err(&pdev->dev, "not enough memory\n");
-+		r = -ENOMEM;
-+		goto err0;
-+	}
-+
-+	rtc->dev = &pdev->dev;
-+	platform_set_drvdata(pdev, rtc);
-+	mutex_init(&rtc->mutex);
-+
-+	rtc->alarm_expired = retu_read_reg(rtc->dev, RETU_REG_IDR) &
-+		(0x1 << RETU_INT_RTCA);
-+
-+	r = retu_rtc_init_irq(rtc);
-+	if (r < 0) {
-+		dev_err(&pdev->dev, "failed to request retu irq\n");
-+		goto err1;
-+	}
-+
-+	/* If the calibration register is zero, we've probably lost power */
-+	if (!(retu_read_reg(rtc->dev, RETU_REG_RTCCALR) & 0x00ff))
-+		retu_rtc_do_reset(rtc);
-+
-+	rtc->rtc = rtc_device_register(pdev->name, &pdev->dev, &
-+			retu_rtc_ops, THIS_MODULE);
-+	if (IS_ERR(rtc->rtc)) {
-+		dev_err(&pdev->dev, "can't register RTC device\n");
-+		goto err2;
-+	}
-+
-+	return 0;
-+
-+err2:
-+	free_irq(rtc->irq_rtcs, rtc);
-+	free_irq(rtc->irq_rtca, rtc);
-+
-+err1:
-+	kfree(rtc);
-+
-+err0:
-+	return r;
-+}
-+
-+static int __devexit retu_rtc_remove(struct platform_device *pdev)
-+{
-+	struct retu_rtc		*rtc = platform_get_drvdata(pdev);
-+
-+	free_irq(rtc->irq_rtcs, rtc);
-+	free_irq(rtc->irq_rtca, rtc);
-+	rtc_device_unregister(rtc->rtc);
-+	kfree(rtc);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver retu_rtc_driver = {
-+	.remove		= __exit_p(retu_rtc_remove),
-+	.driver		= {
-+		.name	= "retu-rtc",
-+	},
-+};
-+
-+static int __init retu_rtc_init(void)
-+{
-+	return platform_driver_probe(&retu_rtc_driver, retu_rtc_probe);
-+}
-+module_init(retu_rtc_init);
-+
-+static void __exit retu_rtc_exit(void)
-+{
-+	platform_driver_unregister(&retu_rtc_driver);
-+}
-+module_exit(retu_rtc_exit);
-+
-+MODULE_DESCRIPTION("Retu RTC");
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Paul Mundt");
-+MODULE_AUTHOR("Igor Stoppa");
-+MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
-+
---- /dev/null
-+++ b/drivers/cbus/retu-wdt.c
-@@ -0,0 +1,272 @@
-+/**
-+ * drivers/cbus/retu-wdt.c
-+ *
-+ * Driver for Retu watchdog
-+ *
-+ * Copyright (C) 2004, 2005 Nokia Corporation
-+ *
-+ * Written by Amit Kucheria <amit.kucheria@nokia.com>
-+ *
-+ * Cleanups by Michael Buesch <mb@bu3sch.de> (C) 2011
-+ *
-+ * This file is subject to the terms and conditions of the GNU General
-+ * Public License. See the file "COPYING" in the main directory of this
-+ * archive for more details.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/init.h>
-+#include <linux/fs.h>
-+#include <linux/io.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/completion.h>
-+#include <linux/errno.h>
-+#include <linux/moduleparam.h>
-+#include <linux/miscdevice.h>
-+#include <linux/watchdog.h>
-+
-+#include <asm/uaccess.h>
-+
-+#include <plat/prcm.h>
-+
-+#include "cbus.h"
-+#include "retu.h"
-+
-+/* Watchdog timeout in seconds */
-+#define RETU_WDT_MIN_TIMER 0
-+#define RETU_WDT_DEFAULT_TIMER 32
-+#define RETU_WDT_MAX_TIMER 63
-+
-+struct retu_wdt_dev {
-+	struct device		*dev;
-+	unsigned int		period_val;	/* Current period of watchdog */
-+	unsigned long		users;
-+	struct miscdevice	miscdev;
-+	struct delayed_work	ping_work;
-+	struct mutex		mutex;
-+};
-+
-+
-+static inline void _retu_modify_counter(struct retu_wdt_dev *wdev,
-+					unsigned int new)
-+{
-+	retu_write_reg(wdev->dev, RETU_REG_WATCHDOG, (u16)new);
-+}
-+
-+static int retu_modify_counter(struct retu_wdt_dev *wdev, unsigned int new)
-+{
-+	if (new < RETU_WDT_MIN_TIMER || new > RETU_WDT_MAX_TIMER)
-+		return -EINVAL;
-+
-+	mutex_lock(&wdev->mutex);
-+	wdev->period_val = new;
-+	_retu_modify_counter(wdev, wdev->period_val);
-+	mutex_unlock(&wdev->mutex);
-+
-+	return 0;
-+}
-+
-+/*
-+ * Since retu watchdog cannot be disabled in hardware, we must kick it
-+ * with a timer until userspace watchdog software takes over. Do this
-+ * unless /dev/watchdog is open or CONFIG_WATCHDOG_NOWAYOUT is set.
-+ */
-+static void retu_wdt_ping_enable(struct retu_wdt_dev *wdev)
-+{
-+	_retu_modify_counter(wdev, RETU_WDT_MAX_TIMER);
-+	schedule_delayed_work(&wdev->ping_work,
-+			      round_jiffies_relative(RETU_WDT_DEFAULT_TIMER * HZ));
-+}
-+
-+static void retu_wdt_ping_disable(struct retu_wdt_dev *wdev)
-+{
-+	_retu_modify_counter(wdev, RETU_WDT_MAX_TIMER);
-+	cancel_delayed_work_sync(&wdev->ping_work);
-+}
-+
-+static void retu_wdt_ping_work(struct work_struct *work)
-+{
-+	struct retu_wdt_dev *wdev = container_of(to_delayed_work(work),
-+					struct retu_wdt_dev, ping_work);
-+	retu_wdt_ping_enable(wdev);
-+}
-+
-+static int retu_wdt_open(struct inode *inode, struct file *file)
-+{
-+	struct miscdevice *mdev = file->private_data;
-+	struct retu_wdt_dev *wdev = container_of(mdev, struct retu_wdt_dev, miscdev);
-+
-+	if (test_and_set_bit(0, &wdev->users))
-+		return -EBUSY;
-+
-+	retu_wdt_ping_disable(wdev);
-+
-+	return nonseekable_open(inode, file);
-+}
-+
-+static int retu_wdt_release(struct inode *inode, struct file *file)
-+{
-+	struct miscdevice *mdev = file->private_data;
-+	struct retu_wdt_dev *wdev = container_of(mdev, struct retu_wdt_dev, miscdev);
-+
-+#ifndef CONFIG_WATCHDOG_NOWAYOUT
-+	retu_wdt_ping_enable(wdev);
-+#endif
-+	clear_bit(0, &wdev->users);
-+
-+	return 0;
-+}
-+
-+static ssize_t retu_wdt_write(struct file *file, const char __user *data,
-+						size_t len, loff_t *ppos)
-+{
-+	struct miscdevice *mdev = file->private_data;
-+	struct retu_wdt_dev *wdev = container_of(mdev, struct retu_wdt_dev, miscdev);
-+
-+	if (len)
-+		retu_modify_counter(wdev, RETU_WDT_MAX_TIMER);
-+
-+	return len;
-+}
-+
-+static long retu_wdt_ioctl(struct file *file, unsigned int cmd,
-+			   unsigned long arg)
-+{
-+	struct miscdevice *mdev = file->private_data;
-+	struct retu_wdt_dev *wdev = container_of(mdev, struct retu_wdt_dev, miscdev);
-+	int new_margin;
-+
-+	static const struct watchdog_info ident = {
-+		.identity = "Retu Watchdog",
-+		.options = WDIOF_SETTIMEOUT,
-+		.firmware_version = 0,
-+	};
-+
-+	switch (cmd) {
-+	default:
-+		return -ENOTTY;
-+	case WDIOC_GETSUPPORT:
-+		return copy_to_user((struct watchdog_info __user *)arg, &ident,
-+							sizeof(ident));
-+	case WDIOC_GETSTATUS:
-+		return put_user(0, (int __user *)arg);
-+	case WDIOC_GETBOOTSTATUS:
-+		if (cpu_is_omap16xx())
-+			return put_user(omap_readw(ARM_SYSST),
-+					(int __user *)arg);
-+		if (cpu_is_omap24xx())
-+			return put_user(omap_prcm_get_reset_sources(),
-+					(int __user *)arg);
-+	case WDIOC_KEEPALIVE:
-+		retu_modify_counter(wdev, RETU_WDT_MAX_TIMER);
-+		break;
-+	case WDIOC_SETTIMEOUT:
-+		if (get_user(new_margin, (int __user *)arg))
-+			return -EFAULT;
-+		retu_modify_counter(wdev, new_margin);
-+		/* Fall through */
-+	case WDIOC_GETTIMEOUT:
-+		return put_user(wdev->period_val, (int __user *)arg);
-+	}
-+
-+	return 0;
-+}
-+
-+static const struct file_operations retu_wdt_fops = {
-+	.owner		= THIS_MODULE,
-+	.write		= retu_wdt_write,
-+	.unlocked_ioctl	= retu_wdt_ioctl,
-+	.open		= retu_wdt_open,
-+	.release	= retu_wdt_release,
-+};
-+
-+static int __init retu_wdt_probe(struct platform_device *pdev)
-+{
-+	struct retu_wdt_dev *wdev;
-+	int ret;
-+
-+	wdev = kzalloc(sizeof(struct retu_wdt_dev), GFP_KERNEL);
-+	if (!wdev)
-+		return -ENOMEM;
-+
-+	wdev->dev = &pdev->dev;
-+	wdev->period_val = RETU_WDT_DEFAULT_TIMER;
-+	mutex_init(&wdev->mutex);
-+
-+	platform_set_drvdata(pdev, wdev);
-+
-+	wdev->miscdev.parent = &pdev->dev;
-+	wdev->miscdev.minor = WATCHDOG_MINOR;
-+	wdev->miscdev.name = "watchdog";
-+	wdev->miscdev.fops = &retu_wdt_fops;
-+
-+	ret = misc_register(&wdev->miscdev);
-+	if (ret)
-+		goto err_free_wdev;
-+
-+	INIT_DELAYED_WORK(&wdev->ping_work, retu_wdt_ping_work);
-+
-+	/* Kick the watchdog for kernel booting to finish.
-+	 * If nowayout is not set, we start the ping work. */
-+#ifdef CONFIG_WATCHDOG_NOWAYOUT
-+	retu_modify_counter(wdev, RETU_WDT_MAX_TIMER);
-+#else
-+	retu_wdt_ping_enable(wdev);
-+#endif
-+
-+	return 0;
-+
-+err_free_wdev:
-+	kfree(wdev);
-+
-+	return ret;
-+}
-+
-+static int __devexit retu_wdt_remove(struct platform_device *pdev)
-+{
-+	struct retu_wdt_dev *wdev;
-+
-+	wdev = platform_get_drvdata(pdev);
-+	misc_deregister(&wdev->miscdev);
-+	cancel_delayed_work_sync(&wdev->ping_work);
-+	kfree(wdev);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver retu_wdt_driver = {
-+	.remove		= __exit_p(retu_wdt_remove),
-+	.driver		= {
-+		.name	= "retu-wdt",
-+	},
-+};
-+
-+static int __init retu_wdt_init(void)
-+{
-+	return platform_driver_probe(&retu_wdt_driver, retu_wdt_probe);
-+}
-+
-+static void __exit retu_wdt_exit(void)
-+{
-+	platform_driver_unregister(&retu_wdt_driver);
-+}
-+
-+module_init(retu_wdt_init);
-+module_exit(retu_wdt_exit);
-+
-+MODULE_DESCRIPTION("Retu WatchDog");
-+MODULE_AUTHOR("Amit Kucheria");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/cbus/tahvo.c
-@@ -0,0 +1,423 @@
-+/**
-+ * drivers/cbus/tahvo.c
-+ *
-+ * Support functions for Tahvo ASIC
-+ *
-+ * Copyright (C) 2004, 2005 Nokia Corporation
-+ *
-+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>,
-+ *	      David Weinehall <david.weinehall@nokia.com>, and
-+ *	      Mikko Ylinen <mikko.k.ylinen@nokia.com>
-+ *
-+ * This file is subject to the terms and conditions of the GNU General
-+ * Public License. See the file "COPYING" in the main directory of this
-+ * archive for more details.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+
-+#include <linux/slab.h>
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/device.h>
-+#include <linux/irq.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/platform_data/cbus.h>
-+#include <linux/mutex.h>
-+
-+#include "cbus.h"
-+#include "tahvo.h"
-+
-+struct tahvo {
-+	/* device lock */
-+	struct mutex	mutex;
-+	struct device	*dev;
-+
-+	int		irq_base;
-+	int		irq_end;
-+	int		irq;
-+
-+	int		ack;
-+	int		mask;
-+
-+	unsigned int	mask_pending:1;
-+	unsigned int	ack_pending:1;
-+	unsigned int	is_betty:1;
-+};
-+
-+/**
-+ * __tahvo_read_reg - Reads a value from a register in Tahvo
-+ * @tahvo: pointer to tahvo structure
-+ * @reg: the register address to read from
-+ */
-+static int __tahvo_read_reg(struct tahvo *tahvo, unsigned reg)
-+{
-+	return cbus_read_reg(tahvo->dev, CBUS_TAHVO_DEVICE_ID, reg);
-+}
-+
-+/**
-+ * __tahvo_write_reg - Writes a value to a register in Tahvo
-+ * @tahvo: pointer to tahvo structure
-+ * @reg: register address to write to
-+ * @val: the value to be written to @reg
-+ */
-+static void __tahvo_write_reg(struct tahvo *tahvo, unsigned reg, u16 val)
-+{
-+	cbus_write_reg(tahvo->dev, CBUS_TAHVO_DEVICE_ID, reg, val);
-+}
-+
-+/**
-+ * tahvo_read_reg - Read a value from a register in Tahvo
-+ * @child: device pointer from the calling child
-+ * @reg: the register to read from
-+ *
-+ * This function returns the contents of the specified register
-+ */
-+int tahvo_read_reg(struct device *child, unsigned reg)
-+{
-+	struct tahvo		*tahvo = dev_get_drvdata(child->parent);
-+
-+	return __tahvo_read_reg(tahvo, reg);
-+}
-+EXPORT_SYMBOL(tahvo_read_reg);
-+
-+/**
-+ * tahvo_write_reg - Write a value to a register in Tahvo
-+ * @child: device pointer from the calling child
-+ * @reg: the register to write to
-+ * @val : the value to write to the register
-+ *
-+ * This function writes a value to the specified register
-+ */
-+void tahvo_write_reg(struct device *child, unsigned reg, u16 val)
-+{
-+	struct tahvo		*tahvo = dev_get_drvdata(child->parent);
-+
-+	__tahvo_write_reg(tahvo, reg, val);
-+}
-+EXPORT_SYMBOL(tahvo_write_reg);
-+
-+/**
-+ * tahvo_set_clear_reg_bits - set and clear register bits atomically
-+ * @child: device pointer from the calling child
-+ * @reg: the register to write to
-+ * @bits: the bits to set
-+ *
-+ * This function sets and clears the specified Tahvo register bits atomically
-+ */
-+void tahvo_set_clear_reg_bits(struct device *child, unsigned reg, u16 set,
-+		u16 clear)
-+{
-+	struct tahvo		*tahvo = dev_get_drvdata(child->parent);
-+	u16			w;
-+
-+	mutex_lock(&tahvo->mutex);
-+	w = __tahvo_read_reg(tahvo, reg);
-+	w &= ~clear;
-+	w |= set;
-+	__tahvo_write_reg(tahvo, reg, w);
-+	mutex_unlock(&tahvo->mutex);
-+}
-+
-+static irqreturn_t tahvo_irq_handler(int irq, void *_tahvo)
-+{
-+	struct tahvo		*tahvo = _tahvo;
-+	u16			id;
-+	u16			im;
-+
-+	id = __tahvo_read_reg(tahvo, TAHVO_REG_IDR);
-+	im = __tahvo_read_reg(tahvo, TAHVO_REG_IMR);
-+	id &= ~im;
-+
-+	if (!id) {
-+		dev_vdbg(tahvo->dev, "No IRQ, spurious ?\n");
-+		return IRQ_NONE;
-+	}
-+
-+	while (id) {
-+		unsigned long	pending = __ffs(id);
-+		unsigned int	irq;
-+
-+		id &= ~BIT(pending);
-+		irq = pending + tahvo->irq_base;
-+		handle_nested_irq(irq);
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+
-+/* -------------------------------------------------------------------------- */
-+
-+static void tahvo_irq_bus_lock(struct irq_data *data)
-+{
-+	struct tahvo		*tahvo = irq_data_get_irq_chip_data(data);
-+
-+	mutex_lock(&tahvo->mutex);
-+}
-+
-+static void tahvo_irq_bus_sync_unlock(struct irq_data *data)
-+{
-+	struct tahvo		*tahvo = irq_data_get_irq_chip_data(data);
-+
-+	if (tahvo->mask_pending) {
-+		__tahvo_write_reg(tahvo, TAHVO_REG_IMR, tahvo->mask);
-+		tahvo->mask_pending = false;
-+	}
-+
-+	if (tahvo->ack_pending) {
-+		__tahvo_write_reg(tahvo, TAHVO_REG_IDR, tahvo->ack);
-+		tahvo->ack_pending = false;
-+	}
-+
-+	mutex_unlock(&tahvo->mutex);
-+}
-+
-+static void tahvo_irq_mask(struct irq_data *data)
-+{
-+	struct tahvo		*tahvo = irq_data_get_irq_chip_data(data);
-+	int			irq = data->irq;
-+
-+	tahvo->mask |= (1 << (irq - tahvo->irq_base));
-+	tahvo->mask_pending = true;
-+}
-+
-+static void tahvo_irq_unmask(struct irq_data *data)
-+{
-+	struct tahvo		*tahvo = irq_data_get_irq_chip_data(data);
-+	int			irq = data->irq;
-+
-+	tahvo->mask &= ~(1 << (irq - tahvo->irq_base));
-+	tahvo->mask_pending = true;
-+}
-+
-+static void tahvo_irq_ack(struct irq_data *data)
-+{
-+	struct tahvo		*tahvo = irq_data_get_irq_chip_data(data);
-+	int			irq = data->irq;
-+
-+	tahvo->ack |= (1 << (irq - tahvo->irq_base));
-+	tahvo->ack_pending = true;
-+}
-+
-+static struct irq_chip tahvo_irq_chip = {
-+	.name			= "tahvo",
-+	.irq_bus_lock		= tahvo_irq_bus_lock,
-+	.irq_bus_sync_unlock	= tahvo_irq_bus_sync_unlock,
-+	.irq_mask		= tahvo_irq_mask,
-+	.irq_unmask		= tahvo_irq_unmask,
-+	.irq_ack		= tahvo_irq_ack,
-+};
-+
-+static inline void tahvo_irq_setup(int irq)
-+{
-+#ifdef CONFIG_ARM
-+	set_irq_flags(irq, IRQF_VALID);
-+#else
-+	irq_set_noprobe(irq);
-+#endif
-+}
-+
-+static void tahvo_irq_init(struct tahvo *tahvo)
-+{
-+	int			base = tahvo->irq_base;
-+	int			end = tahvo->irq_end;
-+	int			irq;
-+
-+	for (irq = base; irq < end; irq++) {
-+		irq_set_chip_data(irq, tahvo);
-+		irq_set_chip_and_handler(irq, &tahvo_irq_chip,
-+				handle_simple_irq);
-+		irq_set_nested_thread(irq, 1);
-+		tahvo_irq_setup(irq);
-+	}
-+}
-+
-+/* -------------------------------------------------------------------------- */
-+
-+static struct resource generic_resources[] = {
-+	{
-+		.start		= -EINVAL,	/* fixed later */
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct device *tahvo_allocate_child(const char *name,
-+		struct device *parent, int irq)
-+{
-+	struct platform_device	*pdev;
-+	int			ret;
-+
-+	pdev = platform_device_alloc(name, -1);
-+	if (!pdev) {
-+		dev_dbg(parent, "can't allocate %s\n", name);
-+		goto err0;
-+	}
-+
-+	pdev->dev.parent = parent;
-+
-+	if (irq > 0) {
-+		generic_resources[0].start = irq;
-+
-+		ret = platform_device_add_resources(pdev, generic_resources,
-+				ARRAY_SIZE(generic_resources));
-+		if (ret < 0) {
-+			dev_dbg(parent, "can't add resources to %s\n", name);
-+			goto err1;
-+		}
-+	}
-+
-+	ret = platform_device_add(pdev);
-+	if (ret < 0) {
-+		dev_dbg(parent, "can't add %s\n", name);
-+		goto err1;
-+	}
-+
-+	return &pdev->dev;
-+
-+err1:
-+	platform_device_put(pdev);
-+
-+err0:
-+	return NULL;
-+}
-+
-+static int tahvo_allocate_children(struct device *parent, int irq_base)
-+{
-+	struct device		*child;
-+
-+	child = tahvo_allocate_child("tahvo-usb", parent,
-+			irq_base + TAHVO_INT_VBUSON);
-+	if (!child)
-+		return -ENOMEM;
-+
-+	child = tahvo_allocate_child("tahvo-pwm", parent, -1);
-+	if (!child)
-+		return -ENOMEM;
-+
-+	return 0;
-+}
-+
-+static int __devinit tahvo_probe(struct platform_device *pdev)
-+{
-+	struct tahvo		*tahvo;
-+	int			rev;
-+	int			ret;
-+	int			irq;
-+	int			id;
-+
-+	tahvo = kzalloc(sizeof(*tahvo), GFP_KERNEL);
-+	if (!tahvo) {
-+		dev_err(&pdev->dev, "not enough memory\n");
-+		ret = -ENOMEM;
-+		goto err0;
-+	}
-+
-+	irq = platform_get_irq(pdev, 0);
-+	platform_set_drvdata(pdev, tahvo);
-+
-+	mutex_init(&tahvo->mutex);
-+
-+	ret = irq_alloc_descs(-1, 0, MAX_TAHVO_IRQ_HANDLERS, 0);
-+	if (ret < 0) {
-+		dev_err(&pdev->dev, "failed to allocate IRQ descs\n");
-+		goto err1;
-+	}
-+
-+	tahvo->irq_base	= ret;
-+	tahvo->irq_end	= ret + MAX_TAHVO_IRQ_HANDLERS;
-+	tahvo->dev	= &pdev->dev;
-+	tahvo->irq	= irq;
-+
-+	tahvo_irq_init(tahvo);
-+
-+	rev = __tahvo_read_reg(tahvo, TAHVO_REG_ASICR);
-+
-+	id = (rev >> 8) & 0xff;
-+
-+	if (id == 0x0b)
-+		tahvo->is_betty = true;
-+
-+	ret = tahvo_allocate_children(&pdev->dev, tahvo->irq_base);
-+	if (ret < 0) {
-+		dev_err(&pdev->dev, "failed to allocate children\n");
-+		goto err2;
-+	}
-+
-+	dev_err(&pdev->dev, "%s v%d.%d found\n",
-+			tahvo->is_betty ? "Betty" : "Tahvo",
-+			(rev >> 4) & 0x0f, rev & 0x0f);
-+
-+	/* Mask all TAHVO interrupts */
-+	__tahvo_write_reg(tahvo, TAHVO_REG_IMR, 0xffff);
-+
-+	ret = request_threaded_irq(irq, NULL, tahvo_irq_handler,
-+			IRQF_TRIGGER_RISING | IRQF_ONESHOT,
-+			"tahvo", tahvo);
-+	if (ret < 0) {
-+		dev_err(&pdev->dev, "Unable to register IRQ handler\n");
-+		goto err2;
-+	}
-+
-+	return 0;
-+
-+err2:
-+	irq_free_descs(tahvo->irq_base, MAX_TAHVO_IRQ_HANDLERS);
-+
-+err1:
-+	kfree(tahvo);
-+
-+err0:
-+	return ret;
-+}
-+
-+static int __devexit tahvo_remove(struct platform_device *pdev)
-+{
-+	struct tahvo		*tahvo = platform_get_drvdata(pdev);
-+	int			irq;
-+
-+	irq = platform_get_irq(pdev, 0);
-+
-+	free_irq(irq, 0);
-+	irq_free_descs(tahvo->irq_base, MAX_TAHVO_IRQ_HANDLERS);
-+	kfree(tahvo);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver tahvo_driver = {
-+	.probe		= tahvo_probe,
-+	.remove		= __devexit_p(tahvo_remove),
-+	.driver		= {
-+		.name	= "tahvo",
-+	},
-+};
-+
-+static int __init tahvo_init(void)
-+{
-+	return platform_driver_register(&tahvo_driver);
-+}
-+subsys_initcall(tahvo_init);
-+
-+static void __exit tahvo_exit(void)
-+{
-+	platform_driver_unregister(&tahvo_driver);
-+}
-+module_exit(tahvo_exit);
-+
-+MODULE_DESCRIPTION("Tahvo ASIC control");
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Juha Yrjölä");
-+MODULE_AUTHOR("David Weinehall");
-+MODULE_AUTHOR("Mikko Ylinen");
-+
---- /dev/null
-+++ b/drivers/cbus/tahvo.h
-@@ -0,0 +1,58 @@
-+/*
-+ * drivers/cbus/tahvo.h
-+ *
-+ * Copyright (C) 2004, 2005 Nokia Corporation
-+ *
-+ * Written by Juha Yrjölä <juha.yrjola@nokia.com> and
-+ *	      David Weinehall <david.weinehall@nokia.com>
-+ *
-+ * This file is subject to the terms and conditions of the GNU General
-+ * Public License. See the file "COPYING" in the main directory of this
-+ * archive for more details.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#ifndef __DRIVERS_CBUS_TAHVO_H
-+#define __DRIVERS_CBUS_TAHVO_H
-+
-+#include <linux/types.h>
-+
-+/* Registers */
-+#define TAHVO_REG_ASICR		0x00	/* ASIC ID & revision */
-+#define TAHVO_REG_IDR		0x01	/* Interrupt ID */
-+#define TAHVO_REG_IDSR		0x02	/* Interrupt status */
-+#define TAHVO_REG_IMR		0x03	/* Interrupt mask */
-+#define TAHVO_REG_CHGCURR	0x04	/* Charge current control PWM (8-bit) */
-+#define TAHVO_REG_LEDPWMR	0x05	/* LED PWM */
-+#define TAHVO_REG_USBR		0x06	/* USB control */
-+#define TAHVO_REG_CHGCTL	0x08	/* Charge control register */
-+#define  TAHVO_REG_CHGCTL_EN		0x0001	/* Global charge enable */
-+#define  TAHVO_REG_CHGCTL_PWMOVR	0x0004	/* PWM override. Force charge PWM to 0%/100% duty cycle. */
-+#define  TAHVO_REG_CHGCTL_PWMOVRZERO	0x0008	/* If set, PWM override is 0% (If unset -> 100%) */
-+#define  TAHVO_REG_CHGCTL_CURMEAS	0x0040	/* Enable battery current measurement. */
-+#define  TAHVO_REG_CHGCTL_CURTIMRST	0x0080	/* Current measure timer reset. */
-+#define TAHVO_REG_BATCURRTIMER	0x0c	/* Battery current measure timer (8-bit) */
-+#define TAHVO_REG_BATCURR	0x0d	/* Battery (dis)charge current (signed 16-bit) */
-+
-+#define TAHVO_REG_MAX		0x0d
-+
-+/* Interrupt sources */
-+#define TAHVO_INT_VBUSON	0
-+#define TAHVO_INT_BATCURR	7 /* Battery current measure timer */
-+
-+#define MAX_TAHVO_IRQ_HANDLERS	8
-+
-+int tahvo_read_reg(struct device *child, unsigned reg);
-+void tahvo_write_reg(struct device *child, unsigned reg, u16 val);
-+void tahvo_set_clear_reg_bits(struct device *child, unsigned reg, u16 set,
-+		u16 clear);
-+
-+#endif /* __DRIVERS_CBUS_TAHVO_H */
---- /dev/null
-+++ b/drivers/cbus/tahvo-usb.c
-@@ -0,0 +1,740 @@
-+/**
-+ * drivers/cbus/tahvo-usb.c
-+ *
-+ * Tahvo USB transeiver
-+ *
-+ * Copyright (C) 2005-2006 Nokia Corporation
-+ *
-+ * Parts copied from drivers/i2c/chips/isp1301_omap.c
-+ * Copyright (C) 2004 Texas Instruments
-+ * Copyright (C) 2004 David Brownell
-+ *
-+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>,
-+ *	      Tony Lindgren <tony@atomide.com>, and
-+ *	      Timo Teräs <timo.teras@nokia.com>
-+ *
-+ * This file is subject to the terms and conditions of the GNU General
-+ * Public License. See the file "COPYING" in the main directory of this
-+ * archive for more details.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/io.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/usb/ch9.h>
-+#include <linux/usb/gadget.h>
-+#include <linux/usb.h>
-+#include <linux/usb/otg.h>
-+#include <linux/i2c.h>
-+#include <linux/workqueue.h>
-+#include <linux/kobject.h>
-+#include <linux/clk.h>
-+#include <linux/mutex.h>
-+
-+#include <asm/irq.h>
-+#include <plat/usb.h>
-+
-+#include "cbus.h"
-+#include "tahvo.h"
-+
-+#define DRIVER_NAME     "tahvo-usb"
-+
-+#define USBR_SLAVE_CONTROL	(1 << 8)
-+#define USBR_VPPVIO_SW		(1 << 7)
-+#define USBR_SPEED		(1 << 6)
-+#define USBR_REGOUT		(1 << 5)
-+#define USBR_MASTER_SW2		(1 << 4)
-+#define USBR_MASTER_SW1		(1 << 3)
-+#define USBR_SLAVE_SW		(1 << 2)
-+#define USBR_NSUSPEND		(1 << 1)
-+#define USBR_SEMODE		(1 << 0)
-+
-+/* bits in OTG_CTRL */
-+
-+/* Bits that are controlled by OMAP OTG and are read-only */
-+#define OTG_CTRL_OMAP_MASK	(OTG_PULLDOWN|OTG_PULLUP|OTG_DRV_VBUS|\
-+				OTG_PD_VBUS|OTG_PU_VBUS|OTG_PU_ID)
-+/* Bits that are controlled by transceiver */
-+#define OTG_CTRL_XCVR_MASK	(OTG_ASESSVLD|OTG_BSESSEND|\
-+				OTG_BSESSVLD|OTG_VBUSVLD|OTG_ID)
-+/* Bits that are controlled by system */
-+#define OTG_CTRL_SYS_MASK	(OTG_A_BUSREQ|OTG_A_SETB_HNPEN|OTG_B_BUSREQ|\
-+				OTG_B_HNPEN|OTG_BUSDROP)
-+
-+#if defined(CONFIG_USB_OHCI_HCD) && !defined(CONFIG_USB_OTG)
-+#error tahvo-otg.c does not work with OCHI yet!
-+#endif
-+
-+#define TAHVO_MODE_HOST		0
-+#define TAHVO_MODE_PERIPHERAL	1
-+
-+#ifdef CONFIG_USB_OTG
-+#define TAHVO_MODE(tu)		(tu)->tahvo_mode
-+#elif defined(CONFIG_USB_GADGET_OMAP)
-+#define TAHVO_MODE(tu)		TAHVO_MODE_PERIPHERAL
-+#else
-+#define TAHVO_MODE(tu)		TAHVO_MODE_HOST
-+#endif
-+
-+struct tahvo_usb {
-+	struct device		*dev;
-+	struct platform_device *pt_dev;
-+	struct otg_transceiver otg;
-+	int vbus_state;
-+	struct mutex serialize;
-+#ifdef CONFIG_USB_OTG
-+	int tahvo_mode;
-+#endif
-+	struct clk *ick;
-+
-+	int		irq;
-+};
-+static struct tahvo_usb *tahvo_usb_device;
-+
-+/*
-+ * ---------------------------------------------------------------------------
-+ * OTG related functions
-+ *
-+ * These shoud be separated into omap-otg.c driver module, as they are used
-+ * by various transceivers. These functions are needed in the UDC-only case
-+ * as well. These functions are copied from GPL isp1301_omap.c
-+ * ---------------------------------------------------------------------------
-+ */
-+static struct platform_device *tahvo_otg_dev;
-+
-+static irqreturn_t omap_otg_irq(int irq, void *arg)
-+{
-+	u16 otg_irq;
-+
-+	otg_irq = omap_readw(OTG_IRQ_SRC);
-+	if (otg_irq & OPRT_CHG) {
-+		omap_writew(OPRT_CHG, OTG_IRQ_SRC);
-+	} else if (otg_irq & B_SRP_TMROUT) {
-+		omap_writew(B_SRP_TMROUT, OTG_IRQ_SRC);
-+	} else if (otg_irq & B_HNP_FAIL) {
-+		omap_writew(B_HNP_FAIL, OTG_IRQ_SRC);
-+	} else if (otg_irq & A_SRP_DETECT) {
-+		omap_writew(A_SRP_DETECT, OTG_IRQ_SRC);
-+	} else if (otg_irq & A_REQ_TMROUT) {
-+		omap_writew(A_REQ_TMROUT, OTG_IRQ_SRC);
-+	} else if (otg_irq & A_VBUS_ERR) {
-+		omap_writew(A_VBUS_ERR, OTG_IRQ_SRC);
-+	} else if (otg_irq & DRIVER_SWITCH) {
-+#ifdef CONFIG_USB_OTG
-+		if ((!(omap_readl(OTG_CTRL) & OTG_DRIVER_SEL)) &&
-+		   tu->otg.host && tu->otg.state == OTG_STATE_A_HOST) {
-+			/* role is host */
-+			usb_bus_start_enum(tu->otg.host,
-+					   tu->otg.host->otg_port);
-+		}
-+#endif
-+		omap_writew(DRIVER_SWITCH, OTG_IRQ_SRC);
-+	} else
-+		return IRQ_NONE;
-+
-+	return IRQ_HANDLED;
-+
-+}
-+
-+static int tahvo_otg_init(void)
-+{
-+	u32 l;
-+
-+#ifdef CONFIG_USB_OTG
-+	if (!tahvo_otg_dev) {
-+		printk("tahvo-usb: no tahvo_otg_dev\n");
-+		return -ENODEV;
-+	}
-+#endif
-+
-+	l = omap_readl(OTG_SYSCON_1);
-+	l &= ~OTG_IDLE_EN;
-+	omap_writel(l, OTG_SYSCON_1);
-+	udelay(100);
-+
-+	/* some of these values are board-specific... */
-+	l = omap_readl(OTG_SYSCON_2);
-+	l |= OTG_EN
-+		/* for B-device: */
-+		| SRP_GPDATA		/* 9msec Bdev D+ pulse */
-+		| SRP_GPDVBUS		/* discharge after VBUS pulse */
-+		// | (3 << 24)		/* 2msec VBUS pulse */
-+		/* for A-device: */
-+		| (0 << 20)		/* 200ms nominal A_WAIT_VRISE timer */
-+		| SRP_DPW		/* detect 167+ns SRP pulses */
-+		| SRP_DATA | SRP_VBUS;	/* accept both kinds of SRP pulse */
-+	omap_writel(l, OTG_SYSCON_2);
-+
-+	omap_writew(DRIVER_SWITCH | OPRT_CHG
-+			| B_SRP_TMROUT | B_HNP_FAIL
-+				  | A_VBUS_ERR | A_SRP_DETECT | A_REQ_TMROUT,
-+					OTG_IRQ_EN);
-+	l = omap_readl(OTG_SYSCON_2);
-+	l |= OTG_EN;
-+	omap_writel(l, OTG_SYSCON_2);
-+
-+	return 0;
-+}
-+
-+static int __init omap_otg_probe(struct platform_device *pdev)
-+{
-+	int ret;
-+
-+	tahvo_otg_dev = pdev;
-+	ret = tahvo_otg_init();
-+	if (ret != 0) {
-+		printk(KERN_ERR "tahvo-usb: tahvo_otg_init failed\n");
-+		return ret;
-+	}
-+
-+	return request_irq(tahvo_otg_dev->resource[1].start,
-+			   omap_otg_irq, IRQF_DISABLED, DRIVER_NAME,
-+			   tahvo_usb_device);
-+}
-+
-+static int __exit omap_otg_remove(struct platform_device *pdev)
-+{
-+	free_irq(tahvo_otg_dev->resource[1].start, tahvo_usb_device);
-+	tahvo_otg_dev = NULL;
-+
-+	return 0;
-+}
-+
-+struct platform_driver omap_otg_driver = {
-+	.driver		= {
-+		.name	= "omap_otg",
-+	},
-+	.remove		= __exit_p(omap_otg_remove),
-+};
-+
-+/*
-+ * ---------------------------------------------------------------------------
-+ * Tahvo related functions
-+ * These are Nokia proprietary code, except for the OTG register settings,
-+ * which are copied from isp1301.c
-+ * ---------------------------------------------------------------------------
-+ */
-+static ssize_t vbus_state_show(struct device *device,
-+			       struct device_attribute *attr, char *buf)
-+{
-+	struct tahvo_usb *tu = dev_get_drvdata(device);
-+	return sprintf(buf, "%d\n", tu->vbus_state);
-+}
-+static DEVICE_ATTR(vbus_state, 0444, vbus_state_show, NULL);
-+
-+int vbus_active = 0;
-+
-+static void check_vbus_state(struct tahvo_usb *tu)
-+{
-+	int reg, prev_state;
-+
-+	reg = tahvo_read_reg(tu->dev, TAHVO_REG_IDSR);
-+	if (reg & 0x01) {
-+		u32 l;
-+
-+		vbus_active = 1;
-+		switch (tu->otg.state) {
-+		case OTG_STATE_B_IDLE:
-+			/* Enable the gadget driver */
-+			if (tu->otg.gadget)
-+				usb_gadget_vbus_connect(tu->otg.gadget);
-+			/* Set B-session valid and not B-sessio ended to indicate
-+			 * Vbus to be ok. */
-+			l = omap_readl(OTG_CTRL);
-+			l &= ~OTG_BSESSEND;
-+			l |= OTG_BSESSVLD;
-+			omap_writel(l, OTG_CTRL);
-+
-+			tu->otg.state = OTG_STATE_B_PERIPHERAL;
-+			break;
-+		case OTG_STATE_A_IDLE:
-+			/* Session is now valid assuming the USB hub is driving Vbus */
-+			tu->otg.state = OTG_STATE_A_HOST;
-+			break;
-+		default:
-+			break;
-+		}
-+		printk("USB cable connected\n");
-+	} else {
-+		switch (tu->otg.state) {
-+		case OTG_STATE_B_PERIPHERAL:
-+			if (tu->otg.gadget)
-+				usb_gadget_vbus_disconnect(tu->otg.gadget);
-+			tu->otg.state = OTG_STATE_B_IDLE;
-+			break;
-+		case OTG_STATE_A_HOST:
-+			tu->otg.state = OTG_STATE_A_IDLE;
-+			break;
-+		default:
-+			break;
-+		}
-+		printk("USB cable disconnected\n");
-+		vbus_active = 0;
-+	}
-+
-+	prev_state = tu->vbus_state;
-+	tu->vbus_state = reg & 0x01;
-+	if (prev_state != tu->vbus_state)
-+		sysfs_notify(&tu->pt_dev->dev.kobj, NULL, "vbus_state");
-+}
-+
-+static void tahvo_usb_become_host(struct tahvo_usb *tu)
-+{
-+	u32 l;
-+
-+	/* Clear system and transceiver controlled bits
-+	 * also mark the A-session is always valid */
-+	tahvo_otg_init();
-+
-+	l = omap_readl(OTG_CTRL);
-+	l &= ~(OTG_CTRL_XCVR_MASK | OTG_CTRL_SYS_MASK);
-+	l |= OTG_ASESSVLD;
-+	omap_writel(l, OTG_CTRL);
-+
-+	/* Power up the transceiver in USB host mode */
-+	tahvo_write_reg(tu->dev, TAHVO_REG_USBR, USBR_REGOUT | USBR_NSUSPEND |
-+			USBR_MASTER_SW2 | USBR_MASTER_SW1);
-+	tu->otg.state = OTG_STATE_A_IDLE;
-+
-+	check_vbus_state(tu);
-+}
-+
-+static void tahvo_usb_stop_host(struct tahvo_usb *tu)
-+{
-+	tu->otg.state = OTG_STATE_A_IDLE;
-+}
-+
-+static void tahvo_usb_become_peripheral(struct tahvo_usb *tu)
-+{
-+	u32 l;
-+
-+	/* Clear system and transceiver controlled bits
-+	 * and enable ID to mark peripheral mode and
-+	 * BSESSEND to mark no Vbus */
-+	tahvo_otg_init();
-+	l = omap_readl(OTG_CTRL);
-+	l &= ~(OTG_CTRL_XCVR_MASK | OTG_CTRL_SYS_MASK | OTG_BSESSVLD);
-+	l |= OTG_ID | OTG_BSESSEND;
-+	omap_writel(l, OTG_CTRL);
-+
-+	/* Power up transceiver and set it in USB perhiperal mode */
-+	tahvo_write_reg(tu->dev, TAHVO_REG_USBR, USBR_SLAVE_CONTROL | USBR_REGOUT | USBR_NSUSPEND | USBR_SLAVE_SW);
-+	tu->otg.state = OTG_STATE_B_IDLE;
-+
-+	check_vbus_state(tu);
-+}
-+
-+static void tahvo_usb_stop_peripheral(struct tahvo_usb *tu)
-+{
-+	u32 l;
-+
-+	l = omap_readl(OTG_CTRL);
-+	l &= ~OTG_BSESSVLD;
-+	l |= OTG_BSESSEND;
-+	omap_writel(l, OTG_CTRL);
-+
-+	if (tu->otg.gadget)
-+		usb_gadget_vbus_disconnect(tu->otg.gadget);
-+	tu->otg.state = OTG_STATE_B_IDLE;
-+
-+}
-+
-+static void tahvo_usb_power_off(struct tahvo_usb *tu)
-+{
-+	u32 l;
-+	int id;
-+
-+	/* Disable gadget controller if any */
-+	if (tu->otg.gadget)
-+		usb_gadget_vbus_disconnect(tu->otg.gadget);
-+
-+	/* Disable OTG and interrupts */
-+	if (TAHVO_MODE(tu) == TAHVO_MODE_PERIPHERAL)
-+		id = OTG_ID;
-+	else
-+		id = 0;
-+	l = omap_readl(OTG_CTRL);
-+	l &= ~(OTG_CTRL_XCVR_MASK | OTG_CTRL_SYS_MASK | OTG_BSESSVLD);
-+	l |= id | OTG_BSESSEND;
-+	omap_writel(l, OTG_CTRL);
-+	omap_writew(0, OTG_IRQ_EN);
-+
-+	l = omap_readl(OTG_SYSCON_2);
-+	l &= ~OTG_EN;
-+	omap_writel(l, OTG_SYSCON_2);
-+
-+	l = omap_readl(OTG_SYSCON_1);
-+	l |= OTG_IDLE_EN;
-+	omap_writel(l, OTG_SYSCON_1);
-+
-+	/* Power off transceiver */
-+	tahvo_write_reg(tu->dev, TAHVO_REG_USBR, 0);
-+	tu->otg.state = OTG_STATE_UNDEFINED;
-+}
-+
-+
-+static int tahvo_usb_set_power(struct otg_transceiver *dev, unsigned mA)
-+{
-+	struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, otg);
-+
-+	dev_dbg(&tu->pt_dev->dev, "set_power %d mA\n", mA);
-+
-+	if (dev->state == OTG_STATE_B_PERIPHERAL) {
-+		/* REVISIT: Can Tahvo charge battery from VBUS? */
-+	}
-+	return 0;
-+}
-+
-+static int tahvo_usb_set_suspend(struct otg_transceiver *dev, int suspend)
-+{
-+	struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, otg);
-+	u16 w;
-+
-+	dev_dbg(&tu->pt_dev->dev, "set_suspend\n");
-+
-+	w = tahvo_read_reg(tu->dev, TAHVO_REG_USBR);
-+	if (suspend)
-+		w &= ~USBR_NSUSPEND;
-+	else
-+		w |= USBR_NSUSPEND;
-+	tahvo_write_reg(tu->dev, TAHVO_REG_USBR, w);
-+
-+	return 0;
-+}
-+
-+static int tahvo_usb_start_srp(struct otg_transceiver *dev)
-+{
-+	struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, otg);
-+	u32 otg_ctrl;
-+
-+	dev_dbg(&tu->pt_dev->dev, "start_srp\n");
-+
-+	if (!dev || tu->otg.state != OTG_STATE_B_IDLE)
-+		return -ENODEV;
-+
-+	otg_ctrl = omap_readl(OTG_CTRL);
-+	if (!(otg_ctrl & OTG_BSESSEND))
-+		return -EINVAL;
-+
-+	otg_ctrl |= OTG_B_BUSREQ;
-+	otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_SYS_MASK;
-+	omap_writel(otg_ctrl, OTG_CTRL);
-+	tu->otg.state = OTG_STATE_B_SRP_INIT;
-+
-+	return 0;
-+}
-+
-+static int tahvo_usb_start_hnp(struct otg_transceiver *otg)
-+{
-+	struct tahvo_usb *tu = container_of(otg, struct tahvo_usb, otg);
-+
-+	dev_dbg(&tu->pt_dev->dev, "start_hnp\n");
-+#ifdef CONFIG_USB_OTG
-+	/* REVISIT: Add this for OTG */
-+#endif
-+	return -EINVAL;
-+}
-+
-+static int tahvo_usb_set_host(struct otg_transceiver *otg, struct usb_bus *host)
-+{
-+	struct tahvo_usb *tu = container_of(otg, struct tahvo_usb, otg);
-+	u32 l;
-+
-+	dev_dbg(&tu->pt_dev->dev, "set_host %p\n", host);
-+
-+	if (otg == NULL)
-+		return -ENODEV;
-+
-+#if defined(CONFIG_USB_OTG) || !defined(CONFIG_USB_GADGET_OMAP)
-+
-+	mutex_lock(&tu->serialize);
-+
-+	if (host == NULL) {
-+		if (TAHVO_MODE(tu) == TAHVO_MODE_HOST)
-+			tahvo_usb_power_off(tu);
-+		tu->otg.host = NULL;
-+		mutex_unlock(&tu->serialize);
-+		return 0;
-+	}
-+
-+	l = omap_readl(OTG_SYSCON_1);
-+	l &= ~(OTG_IDLE_EN | HST_IDLE_EN | DEV_IDLE_EN);
-+	omap_writel(l, OTG_SYSCON_1);
-+
-+	if (TAHVO_MODE(tu) == TAHVO_MODE_HOST) {
-+		tu->otg.host = NULL;
-+		tahvo_usb_become_host(tu);
-+	}
-+
-+	tu->otg.host = host;
-+
-+	mutex_unlock(&tu->serialize);
-+#else
-+	/* No host mode configured, so do not allow host controlled to be set */
-+	return -EINVAL;
-+#endif
-+
-+	return 0;
-+}
-+
-+static int tahvo_usb_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
-+{
-+	struct tahvo_usb *tu = container_of(otg, struct tahvo_usb, otg);
-+
-+	dev_dbg(&tu->pt_dev->dev, "set_peripheral %p\n", gadget);
-+
-+	if (!otg)
-+		return -ENODEV;
-+
-+#if defined(CONFIG_USB_OTG) || defined(CONFIG_USB_GADGET_OMAP)
-+
-+	mutex_lock(&tu->serialize);
-+
-+	if (!gadget) {
-+		if (TAHVO_MODE(tu) == TAHVO_MODE_PERIPHERAL)
-+			tahvo_usb_power_off(tu);
-+		tu->otg.gadget = NULL;
-+		mutex_unlock(&tu->serialize);
-+		return 0;
-+	}
-+
-+	tu->otg.gadget = gadget;
-+	if (TAHVO_MODE(tu) == TAHVO_MODE_PERIPHERAL)
-+		tahvo_usb_become_peripheral(tu);
-+
-+	mutex_unlock(&tu->serialize);
-+#else
-+	/* No gadget mode configured, so do not allow host controlled to be set */
-+	return -EINVAL;
-+#endif
-+
-+	return 0;
-+}
-+
-+static irqreturn_t tahvo_usb_vbus_interrupt(int irq, void *_tu)
-+{
-+	struct tahvo_usb *tu = _tu;
-+
-+	check_vbus_state(tu);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+#ifdef CONFIG_USB_OTG
-+static ssize_t otg_mode_show(struct device *device,
-+			     struct device_attribute *attr, char *buf)
-+{
-+	struct tahvo_usb *tu = dev_get_drvdata(device);
-+	switch (tu->tahvo_mode) {
-+	case TAHVO_MODE_HOST:
-+		return sprintf(buf, "host\n");
-+	case TAHVO_MODE_PERIPHERAL:
-+		return sprintf(buf, "peripheral\n");
-+	}
-+	return sprintf(buf, "unknown\n");
-+}
-+
-+static ssize_t otg_mode_store(struct device *device,
-+			      struct device_attribute *attr,
-+			      const char *buf, size_t count)
-+{
-+	struct tahvo_usb *tu = dev_get_drvdata(device);
-+	int r;
-+
-+	r = strlen(buf);
-+	mutex_lock(&tu->serialize);
-+	if (strncmp(buf, "host", 4) == 0) {
-+		if (tu->tahvo_mode == TAHVO_MODE_PERIPHERAL)
-+			tahvo_usb_stop_peripheral(tu);
-+		tu->tahvo_mode = TAHVO_MODE_HOST;
-+		if (tu->otg.host) {
-+			printk(KERN_INFO "Selected HOST mode: host controller present.\n");
-+			tahvo_usb_become_host(tu);
-+		} else {
-+			printk(KERN_INFO "Selected HOST mode: no host controller, powering off.\n");
-+			tahvo_usb_power_off(tu);
-+		}
-+	} else if (strncmp(buf, "peripheral", 10) == 0) {
-+		if (tu->tahvo_mode == TAHVO_MODE_HOST)
-+			tahvo_usb_stop_host(tu);
-+		tu->tahvo_mode = TAHVO_MODE_PERIPHERAL;
-+		if (tu->otg.gadget) {
-+			printk(KERN_INFO "Selected PERIPHERAL mode: gadget driver present.\n");
-+			tahvo_usb_become_peripheral(tu);
-+		} else {
-+			printk(KERN_INFO "Selected PERIPHERAL mode: no gadget driver, powering off.\n");
-+			tahvo_usb_power_off(tu);
-+		}
-+	} else
-+		r = -EINVAL;
-+
-+	mutex_unlock(&tu->serialize);
-+	return r;
-+}
-+
-+static DEVICE_ATTR(otg_mode, 0644, otg_mode_show, otg_mode_store);
-+#endif
-+
-+static int __init tahvo_usb_probe(struct platform_device *pdev)
-+{
-+	struct tahvo_usb *tu;
-+	struct device *dev = &pdev->dev;
-+	int ret;
-+	int irq;
-+
-+	dev_dbg(dev, "probe\n");
-+
-+	/* Create driver data */
-+	tu = kzalloc(sizeof(*tu), GFP_KERNEL);
-+	if (!tu)
-+		return -ENOMEM;
-+	tahvo_usb_device = tu;
-+
-+	tu->dev = dev;
-+	tu->pt_dev = pdev;
-+#ifdef CONFIG_USB_OTG
-+	/* Default mode */
-+#ifdef CONFIG_CBUS_TAHVO_USB_HOST_BY_DEFAULT
-+	tu->tahvo_mode = TAHVO_MODE_HOST;
-+#else
-+	tu->tahvo_mode = TAHVO_MODE_PERIPHERAL;
-+#endif
-+#endif
-+
-+	mutex_init(&tu->serialize);
-+
-+	tu->ick = clk_get(NULL, "usb_l4_ick");
-+	if (IS_ERR(tu->ick)) {
-+		dev_err(dev, "Failed to get usb_l4_ick\n");
-+		ret = PTR_ERR(tu->ick);
-+		goto err_free_tu;
-+	}
-+	clk_enable(tu->ick);
-+
-+	/* Set initial state, so that we generate kevents only on
-+	 * state changes */
-+	tu->vbus_state = tahvo_read_reg(tu->dev, TAHVO_REG_IDSR) & 0x01;
-+
-+	irq = platform_get_irq(pdev, 0);
-+	tu->irq = irq;
-+
-+	/* We cannot enable interrupt until omap_udc is initialized */
-+	ret = request_threaded_irq(irq, NULL, tahvo_usb_vbus_interrupt,
-+			IRQF_ONESHOT, "tahvo-vbus", tu);
-+	if (ret != 0) {
-+		printk(KERN_ERR "Could not register Tahvo interrupt for VBUS\n");
-+		goto err_release_clk;
-+	}
-+
-+	/* Attributes */
-+	ret = device_create_file(dev, &dev_attr_vbus_state);
-+#ifdef CONFIG_USB_OTG
-+	ret |= device_create_file(dev, &dev_attr_otg_mode);
-+#endif
-+	if (ret)
-+		printk(KERN_ERR "attribute creation failed: %d\n", ret);
-+
-+	/* Create OTG interface */
-+	tahvo_usb_power_off(tu);
-+	tu->otg.state = OTG_STATE_UNDEFINED;
-+	tu->otg.label = DRIVER_NAME;
-+	tu->otg.set_host = tahvo_usb_set_host;
-+	tu->otg.set_peripheral = tahvo_usb_set_peripheral;
-+	tu->otg.set_power = tahvo_usb_set_power;
-+	tu->otg.set_suspend = tahvo_usb_set_suspend;
-+	tu->otg.start_srp = tahvo_usb_start_srp;
-+	tu->otg.start_hnp = tahvo_usb_start_hnp;
-+
-+	ret = otg_set_transceiver(&tu->otg);
-+	if (ret < 0) {
-+		printk(KERN_ERR "Cannot register USB transceiver\n");
-+		goto err_free_irq;
-+	}
-+
-+	dev_set_drvdata(dev, tu);
-+
-+	return 0;
-+
-+err_free_irq:
-+	free_irq(tu->irq, tu);
-+err_release_clk:
-+	clk_disable(tu->ick);
-+	clk_put(tu->ick);
-+err_free_tu:
-+	kfree(tu);
-+	tahvo_usb_device = NULL;
-+
-+	return ret;
-+}
-+
-+static int __exit tahvo_usb_remove(struct platform_device *pdev)
-+{
-+	struct tahvo_usb *tu = platform_get_drvdata(pdev);
-+
-+	dev_dbg(&pdev->dev, "remove\n");
-+
-+	free_irq(tu->irq, tu);
-+	flush_scheduled_work();
-+	otg_set_transceiver(0);
-+	device_remove_file(&pdev->dev, &dev_attr_vbus_state);
-+#ifdef CONFIG_USB_OTG
-+	device_remove_file(&pdev->dev, &dev_attr_otg_mode);
-+#endif
-+	clk_disable(tu->ick);
-+	clk_put(tu->ick);
-+
-+	kfree(tu);
-+	tahvo_usb_device = NULL;
-+
-+	return 0;
-+}
-+
-+static struct platform_driver tahvo_usb_driver = {
-+	.driver		= {
-+		.name	= "tahvo-usb",
-+	},
-+	.remove		= __exit_p(tahvo_usb_remove),
-+};
-+
-+static int __init tahvo_usb_init(void)
-+{
-+	int ret = 0;
-+
-+	ret = platform_driver_probe(&tahvo_usb_driver, tahvo_usb_probe);
-+	if (ret)
-+		return ret;
-+
-+	ret = platform_driver_probe(&omap_otg_driver, omap_otg_probe);
-+	if (ret) {
-+		platform_driver_unregister(&tahvo_usb_driver);
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+subsys_initcall(tahvo_usb_init);
-+
-+static void __exit tahvo_usb_exit(void)
-+{
-+	platform_driver_unregister(&omap_otg_driver);
-+	platform_driver_unregister(&tahvo_usb_driver);
-+}
-+module_exit(tahvo_usb_exit);
-+
-+MODULE_DESCRIPTION("Tahvo USB OTG Transceiver Driver");
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Juha Yrjölä, Tony Lindgren, and Timo Teräs");
---- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -78,7 +78,7 @@ obj-$(CONFIG_GAMEPORT)		+= input/gamepor
- obj-$(CONFIG_INPUT)		+= input/
- obj-$(CONFIG_I2O)		+= message/
- obj-$(CONFIG_RTC_LIB)		+= rtc/
--obj-y				+= i2c/ media/
-+obj-y				+= i2c/ media/ cbus/
- obj-$(CONFIG_PPS)		+= pps/
- obj-$(CONFIG_PTP_1588_CLOCK)	+= ptp/
- obj-$(CONFIG_W1)		+= w1/
---- a/drivers/Kconfig
-+++ b/drivers/Kconfig
-@@ -2,6 +2,8 @@ menu "Device Drivers"
- 
- source "drivers/base/Kconfig"
- 
-+source "drivers/cbus/Kconfig"
-+
- source "drivers/connector/Kconfig"
- 
- source "drivers/mtd/Kconfig"
diff --git a/target/linux/omap24xx/patches-3.3/251-cbus-tahvo-lock-fix.patch b/target/linux/omap24xx/patches-3.3/251-cbus-tahvo-lock-fix.patch
deleted file mode 100644
index be406716ae..0000000000
--- a/target/linux/omap24xx/patches-3.3/251-cbus-tahvo-lock-fix.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/drivers/cbus/tahvo.c
-+++ b/drivers/cbus/tahvo.c
-@@ -104,7 +104,9 @@ void tahvo_write_reg(struct device *chil
- {
- 	struct tahvo		*tahvo = dev_get_drvdata(child->parent);
- 
-+	mutex_lock(&tahvo->mutex);
- 	__tahvo_write_reg(tahvo, reg, val);
-+	mutex_unlock(&tahvo->mutex);
- }
- EXPORT_SYMBOL(tahvo_write_reg);
- 
diff --git a/target/linux/omap24xx/patches-3.3/252-cbus-retu-tahvo-ack-fix.patch b/target/linux/omap24xx/patches-3.3/252-cbus-retu-tahvo-ack-fix.patch
deleted file mode 100644
index 86f2f770e9..0000000000
--- a/target/linux/omap24xx/patches-3.3/252-cbus-retu-tahvo-ack-fix.patch
+++ /dev/null
@@ -1,142 +0,0 @@
---- a/drivers/cbus/retu.c
-+++ b/drivers/cbus/retu.c
-@@ -53,9 +53,6 @@ struct retu {
- 
- 	int			irq;
- 
--	int			ack;
--	bool			ack_pending;
--
- 	int			mask;
- 	bool			mask_pending;
- 
-@@ -191,9 +188,10 @@ static irqreturn_t retu_irq_handler(int
- 	mutex_lock(&retu->mutex);
- 	idr = __retu_read_reg(retu, RETU_REG_IDR);
- 	imr = __retu_read_reg(retu, RETU_REG_IMR);
-+	idr &= ~imr;
-+	__retu_write_reg(retu, RETU_REG_IDR, idr);
- 	mutex_unlock(&retu->mutex);
- 
--	idr &= ~imr;
- 	if (!idr) {
- 		dev_vdbg(retu->dev, "No IRQ, spurious?\n");
- 		return IRQ_NONE;
-@@ -232,15 +230,6 @@ static void retu_irq_unmask(struct irq_d
- 
- }
- 
--static void retu_irq_ack(struct irq_data *data)
--{
--	struct retu		*retu = irq_data_get_irq_chip_data(data);
--	int			irq = data->irq;
--
--	retu->ack |= (1 << (irq - retu->irq_base));
--	retu->ack_pending = true;
--}
--
- static void retu_bus_lock(struct irq_data *data)
- {
- 	struct retu		*retu = irq_data_get_irq_chip_data(data);
-@@ -257,11 +246,6 @@ static void retu_bus_sync_unlock(struct
- 		retu->mask_pending = false;
- 	}
- 
--	if (retu->ack_pending) {
--		__retu_write_reg(retu, RETU_REG_IDR, retu->ack);
--		retu->ack_pending = false;
--	}
--
- 	mutex_unlock(&retu->mutex);
- }
- 
-@@ -271,7 +255,6 @@ static struct irq_chip retu_irq_chip = {
- 	.irq_bus_sync_unlock	= retu_bus_sync_unlock,
- 	.irq_mask		= retu_irq_mask,
- 	.irq_unmask		= retu_irq_unmask,
--	.irq_ack		= retu_irq_ack,
- };
- 
- static inline void retu_irq_setup(int irq)
-@@ -291,8 +274,7 @@ static void retu_irq_init(struct retu *r
- 
- 	for (irq = base; irq < end; irq++) {
- 		irq_set_chip_data(irq, retu);
--		irq_set_chip_and_handler(irq, &retu_irq_chip,
--				handle_simple_irq);
-+		irq_set_chip(irq, &retu_irq_chip);
- 		irq_set_nested_thread(irq, 1);
- 		retu_irq_setup(irq);
- 	}
---- a/drivers/cbus/tahvo.c
-+++ b/drivers/cbus/tahvo.c
-@@ -48,11 +48,9 @@ struct tahvo {
- 	int		irq_end;
- 	int		irq;
- 
--	int		ack;
- 	int		mask;
- 
- 	unsigned int	mask_pending:1;
--	unsigned int	ack_pending:1;
- 	unsigned int	is_betty:1;
- };
- 
-@@ -138,9 +136,12 @@ static irqreturn_t tahvo_irq_handler(int
- 	u16			id;
- 	u16			im;
- 
-+	mutex_lock(&tahvo->mutex);
- 	id = __tahvo_read_reg(tahvo, TAHVO_REG_IDR);
- 	im = __tahvo_read_reg(tahvo, TAHVO_REG_IMR);
- 	id &= ~im;
-+	__tahvo_write_reg(tahvo, TAHVO_REG_IDR, id);
-+	mutex_unlock(&tahvo->mutex);
- 
- 	if (!id) {
- 		dev_vdbg(tahvo->dev, "No IRQ, spurious ?\n");
-@@ -177,11 +178,6 @@ static void tahvo_irq_bus_sync_unlock(st
- 		tahvo->mask_pending = false;
- 	}
- 
--	if (tahvo->ack_pending) {
--		__tahvo_write_reg(tahvo, TAHVO_REG_IDR, tahvo->ack);
--		tahvo->ack_pending = false;
--	}
--
- 	mutex_unlock(&tahvo->mutex);
- }
- 
-@@ -203,22 +199,12 @@ static void tahvo_irq_unmask(struct irq_
- 	tahvo->mask_pending = true;
- }
- 
--static void tahvo_irq_ack(struct irq_data *data)
--{
--	struct tahvo		*tahvo = irq_data_get_irq_chip_data(data);
--	int			irq = data->irq;
--
--	tahvo->ack |= (1 << (irq - tahvo->irq_base));
--	tahvo->ack_pending = true;
--}
--
- static struct irq_chip tahvo_irq_chip = {
- 	.name			= "tahvo",
- 	.irq_bus_lock		= tahvo_irq_bus_lock,
- 	.irq_bus_sync_unlock	= tahvo_irq_bus_sync_unlock,
- 	.irq_mask		= tahvo_irq_mask,
- 	.irq_unmask		= tahvo_irq_unmask,
--	.irq_ack		= tahvo_irq_ack,
- };
- 
- static inline void tahvo_irq_setup(int irq)
-@@ -238,8 +224,7 @@ static void tahvo_irq_init(struct tahvo
- 
- 	for (irq = base; irq < end; irq++) {
- 		irq_set_chip_data(irq, tahvo);
--		irq_set_chip_and_handler(irq, &tahvo_irq_chip,
--				handle_simple_irq);
-+		irq_set_chip(irq, &tahvo_irq_chip);
- 		irq_set_nested_thread(irq, 1);
- 		tahvo_irq_setup(irq);
- 	}
diff --git a/target/linux/omap24xx/patches-3.3/254-cbus-retu-tahvo-irq-mask-init-fix.patch b/target/linux/omap24xx/patches-3.3/254-cbus-retu-tahvo-irq-mask-init-fix.patch
deleted file mode 100644
index a1be6b793e..0000000000
--- a/target/linux/omap24xx/patches-3.3/254-cbus-retu-tahvo-irq-mask-init-fix.patch
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/drivers/cbus/retu.c
-+++ b/drivers/cbus/retu.c
-@@ -451,7 +451,8 @@ static int __devinit retu_probe(struct p
- 			(rev >> 4) & 0x07, rev & 0x0f);
- 
- 	/* Mask all RETU interrupts */
--	__retu_write_reg(retu, RETU_REG_IMR, 0xffff);
-+	retu->mask = 0xFFFF;
-+	__retu_write_reg(retu, RETU_REG_IMR, retu->mask);
- 
- 	ret = request_threaded_irq(retu->irq, NULL, retu_irq_handler,
- 			IRQF_ONESHOT, "retu", retu);
---- a/drivers/cbus/tahvo.c
-+++ b/drivers/cbus/tahvo.c
-@@ -346,7 +346,8 @@ static int __devinit tahvo_probe(struct
- 			(rev >> 4) & 0x0f, rev & 0x0f);
- 
- 	/* Mask all TAHVO interrupts */
--	__tahvo_write_reg(tahvo, TAHVO_REG_IMR, 0xffff);
-+	tahvo->mask = 0xFFFF;
-+	__tahvo_write_reg(tahvo, TAHVO_REG_IMR, tahvo->mask);
- 
- 	ret = request_threaded_irq(irq, NULL, tahvo_irq_handler,
- 			IRQF_TRIGGER_RISING | IRQF_ONESHOT,
diff --git a/target/linux/omap24xx/patches-3.3/300-cbus-platform.patch b/target/linux/omap24xx/patches-3.3/300-cbus-platform.patch
deleted file mode 100644
index 7f0c7b4bfc..0000000000
--- a/target/linux/omap24xx/patches-3.3/300-cbus-platform.patch
+++ /dev/null
@@ -1,175 +0,0 @@
---- a/arch/arm/mach-omap2/board-n8x0.c
-+++ b/arch/arm/mach-omap2/board-n8x0.c
-@@ -15,8 +15,11 @@
- #include <linux/delay.h>
- #include <linux/gpio.h>
- #include <linux/init.h>
-+#include <linux/irq.h>
- #include <linux/io.h>
- #include <linux/stddef.h>
-+#include <linux/platform_device.h>
-+#include <linux/platform_data/cbus.h>
- #include <linux/i2c.h>
- #include <linux/spi/spi.h>
- #include <linux/usb/musb.h>
-@@ -193,6 +196,110 @@ static struct omap_onenand_platform_data
- };
- #endif
- 
-+#if defined(CONFIG_CBUS) || defined(CONFIG_CBUS_MODULE)
-+
-+static struct cbus_host_platform_data n8x0_cbus_data = {
-+	.clk_gpio	= 66,
-+	.dat_gpio	= 65,
-+	.sel_gpio	= 64,
-+};
-+
-+static struct platform_device n8x0_cbus_device = {
-+	.name		= "cbus",
-+	.id		= -1,
-+	.dev		= {
-+		.platform_data = &n8x0_cbus_data,
-+	},
-+};
-+
-+static struct resource retu_resource[] = {
-+	{
-+		.start	= -EINVAL, /* set later */
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct cbus_retu_platform_data n8x0_retu_data = {
-+	.devid		= CBUS_RETU_DEVICE_ID,
-+};
-+
-+static struct platform_device retu_device = {
-+	.name		= "retu",
-+	.id		= -1,
-+	.resource	= retu_resource,
-+	.num_resources	= ARRAY_SIZE(retu_resource),
-+	.dev		= {
-+		.platform_data = &n8x0_retu_data,
-+		.parent = &n8x0_cbus_device.dev,
-+	},
-+};
-+
-+static struct resource tahvo_resource[] = {
-+	{
-+		.start	= -EINVAL, /* set later */
-+		.flags	= IORESOURCE_IRQ,
-+	}
-+};
-+
-+static struct platform_device tahvo_device = {
-+	.name		= "tahvo",
-+	.id		= -1,
-+	.resource	= tahvo_resource,
-+	.num_resources	= ARRAY_SIZE(tahvo_resource),
-+	.dev		= {
-+		.parent = &n8x0_cbus_device.dev,
-+	},
-+};
-+
-+static void __init n8x0_cbus_init(void)
-+{
-+	int		ret;
-+
-+	platform_device_register(&n8x0_cbus_device);
-+
-+	ret = gpio_request(108, "RETU irq");
-+	if (ret < 0) {
-+		pr_err("retu: Unable to reserve IRQ GPIO\n");
-+		return;
-+	}
-+
-+	ret = gpio_direction_input(108);
-+	if (ret < 0) {
-+		pr_err("retu: Unable to change gpio direction\n");
-+		gpio_free(108);
-+		return;
-+	}
-+
-+	irq_set_irq_type(gpio_to_irq(108), IRQ_TYPE_EDGE_RISING);
-+	retu_resource[0].start = gpio_to_irq(108);
-+	platform_device_register(&retu_device);
-+
-+	ret = gpio_request(111, "TAHVO irq");
-+	if (ret) {
-+		pr_err("tahvo: Unable to reserve IRQ GPIO\n");
-+		gpio_free(108);
-+		return;
-+	}
-+
-+	/* Set the pin as input */
-+	ret = gpio_direction_input(111);
-+	if (ret) {
-+		pr_err("tahvo: Unable to change direction\n");
-+		gpio_free(108);
-+		gpio_free(111);
-+		return;
-+	}
-+
-+	tahvo_resource[0].start = gpio_to_irq(111);
-+	platform_device_register(&tahvo_device);
-+}
-+
-+#else
-+static inline void __init n8x0_cbus_init(void)
-+{
-+}
-+#endif
-+
- #if defined(CONFIG_MENELAUS) &&						\
- 	(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE))
- 
-@@ -671,6 +778,8 @@ static inline void board_serial_init(voi
- static void __init n8x0_init_machine(void)
- {
- 	omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
-+	n8x0_cbus_init();
-+
- 	/* FIXME: add n810 spi devices */
- 	spi_register_board_info(n800_spi_board_info,
- 				ARRAY_SIZE(n800_spi_board_info));
---- /dev/null
-+++ b/include/linux/platform_data/cbus.h
-@@ -0,0 +1,38 @@
-+/*
-+ * cbus.h - CBUS platform_data definition
-+ *
-+ * Copyright (C) 2004 - 2009 Nokia Corporation
-+ *
-+ * Written by Felipe Balbi <felipe.balbi@nokia.com>
-+ *
-+ * This file is subject to the terms and conditions of the GNU General
-+ * Public License. See the file "COPYING" in the main directory of this
-+ * archive for more details.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#ifndef __INCLUDE_LINUX_CBUS_H
-+#define __INCLUDE_LINUX_CBUS_H
-+
-+#define CBUS_RETU_DEVICE_ID	0x01
-+#define CBUS_TAHVO_DEVICE_ID	0x02
-+
-+struct cbus_host_platform_data {
-+	int	dat_gpio;
-+	int	clk_gpio;
-+	int	sel_gpio;
-+};
-+
-+struct cbus_retu_platform_data {
-+	int	devid;
-+};
-+
-+#endif /* __INCLUDE_LINUX_CBUS_H */
diff --git a/target/linux/omap24xx/patches-3.3/309-omapfb-circular-mutex-workaround.patch b/target/linux/omap24xx/patches-3.3/309-omapfb-circular-mutex-workaround.patch
deleted file mode 100644
index e5e083e241..0000000000
--- a/target/linux/omap24xx/patches-3.3/309-omapfb-circular-mutex-workaround.patch
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/drivers/video/omap/omapfb_main.c
-+++ b/drivers/video/omap/omapfb_main.c
-@@ -420,10 +420,10 @@ static void set_fb_fix(struct fb_info *f
- 	fbi->screen_base	= rg->vaddr;
- 
- 	if (!from_init) {
--		mutex_lock(&fbi->mm_lock);
-+		preempt_disable();
- 		fix->smem_start		= rg->paddr;
- 		fix->smem_len		= rg->size;
--		mutex_unlock(&fbi->mm_lock);
-+		preempt_enable();
- 	} else {
- 		fix->smem_start		= rg->paddr;
- 		fix->smem_len		= rg->size;
-@@ -933,10 +933,10 @@ static int omapfb_setup_mem(struct fb_in
- 				 * plane memory is dealloce'd, the other
- 				 * screen parameters in var / fix are invalid.
- 				 */
--				mutex_lock(&fbi->mm_lock);
-+				preempt_disable();
- 				fbi->fix.smem_start = 0;
- 				fbi->fix.smem_len = 0;
--				mutex_unlock(&fbi->mm_lock);
-+				preempt_enable();
- 			}
- 		}
- 	}
---- a/drivers/video/fbmem.c
-+++ b/drivers/video/fbmem.c
-@@ -1383,8 +1383,10 @@ fb_mmap(struct file *file, struct vm_are
- 	}
- 
- 	/* frame buffer memory */
-+	preempt_disable();
- 	start = info->fix.smem_start;
- 	len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.smem_len);
-+	preempt_enable();
- 	if (off >= len) {
- 		/* memory mapped io */
- 		off -= len;
diff --git a/target/linux/omap24xx/patches-3.3/310-n810-lcd.patch b/target/linux/omap24xx/patches-3.3/310-n810-lcd.patch
deleted file mode 100644
index 2ee79f2de5..0000000000
--- a/target/linux/omap24xx/patches-3.3/310-n810-lcd.patch
+++ /dev/null
@@ -1,368 +0,0 @@
---- a/arch/arm/mach-omap2/board-n8x0.c
-+++ b/arch/arm/mach-omap2/board-n8x0.c
-@@ -24,6 +24,7 @@
- #include <linux/spi/spi.h>
- #include <linux/usb/musb.h>
- #include <sound/tlv320aic3x.h>
-+#include <linux/spi/tsc2005.h>
- 
- #include <asm/mach/arch.h>
- #include <asm/mach-types.h>
-@@ -43,6 +44,66 @@ static int slot1_cover_open;
- static int slot2_cover_open;
- static struct device *mmc_device;
- 
-+#define	RX51_TSC2005_RESET_GPIO	94
-+#define	RX51_TSC2005_IRQ_GPIO	106
-+
-+#ifdef CONFIG_TOUCHSCREEN_TSC2005
-+static struct tsc2005_platform_data tsc2005_config;
-+static void rx51_tsc2005_set_reset(bool enable)
-+{
-+	gpio_set_value(RX51_TSC2005_RESET_GPIO, enable);
-+}
-+
-+static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
-+	.turbo_mode	= 0,
-+	.single_channel = 1,
-+};
-+#endif
-+
-+static void __init tsc2005_set_config(void)
-+{
-+	const struct omap_lcd_config *conf;
-+
-+	conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
-+	if (conf != NULL) {
-+#ifdef CONFIG_TOUCHSCREEN_TSC2005
-+		if (strcmp(conf->panel_name, "lph8923") == 0) {
-+			tsc2005_config.ts_x_plate_ohm = 180;
-+			tsc2005_config.ts_pressure_max = 2048;
-+			tsc2005_config.ts_pressure_fudge = 2;
-+			tsc2005_config.ts_x_max = 4096;
-+			tsc2005_config.ts_x_fudge = 4;
-+			tsc2005_config.ts_y_max = 4096;
-+			tsc2005_config.ts_y_fudge = 7;
-+			tsc2005_config.set_reset = rx51_tsc2005_set_reset;
-+		} else if (strcmp(conf->panel_name, "ls041y3") == 0) {
-+			tsc2005_config.ts_x_plate_ohm = 280;
-+			tsc2005_config.ts_pressure_max = 2048;
-+			tsc2005_config.ts_pressure_fudge = 2;
-+			tsc2005_config.ts_x_max = 4096;
-+			tsc2005_config.ts_x_fudge = 4;
-+			tsc2005_config.ts_y_max = 4096;
-+			tsc2005_config.ts_y_fudge = 7;
-+			tsc2005_config.set_reset = rx51_tsc2005_set_reset;
-+		} else {
-+			printk(KERN_ERR "Unknown panel type, set default "
-+			       "touchscreen configuration\n");
-+			tsc2005_config.ts_x_plate_ohm = 200;
-+		}
-+#endif
-+	}
-+}
-+
-+static struct omap2_mcspi_device_config mipid_mcspi_config = {
-+	.turbo_mode	= 0,
-+	.single_channel	= 1,
-+};
-+
-+extern struct mipid_platform_data n8x0_mipid_platform_data;
-+
-+extern void n8x0_mipid_init(void);
-+extern void n8x0_blizzard_init(void);
-+
- #define TUSB6010_ASYNC_CS	1
- #define TUSB6010_SYNC_CS	4
- #define TUSB6010_GPIO_INT	58
-@@ -145,12 +206,29 @@ static struct omap2_mcspi_device_config
- 
- static struct spi_board_info n800_spi_board_info[] __initdata = {
- 	{
-+		.modalias	= "lcd_mipid",
-+		.bus_num	= 1,
-+		.chip_select	= 1,
-+		.max_speed_hz	= 4000000,
-+		.controller_data= &mipid_mcspi_config,
-+		.platform_data	= &n8x0_mipid_platform_data,
-+	},
-+	{
- 		.modalias	= "p54spi",
- 		.bus_num	= 2,
- 		.chip_select	= 0,
- 		.max_speed_hz   = 48000000,
- 		.controller_data = &p54spi_mcspi_config,
- 	},
-+	{
-+		.modalias	 = "tsc2005",
-+		.bus_num	 = 1,
-+		.chip_select	 = 0,
-+		.irq		 = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),
-+		.max_speed_hz    = 6000000,
-+		.controller_data = &tsc2005_mcspi_config,
-+		.platform_data   = &tsc2005_config,
-+	},
- };
- 
- #if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-@@ -781,6 +859,7 @@ static void __init n8x0_init_machine(voi
- 	n8x0_cbus_init();
- 
- 	/* FIXME: add n810 spi devices */
-+	tsc2005_set_config();
- 	spi_register_board_info(n800_spi_board_info,
- 				ARRAY_SIZE(n800_spi_board_info));
- 	omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1,
-@@ -790,6 +869,8 @@ static void __init n8x0_init_machine(voi
- 		i2c_register_board_info(2, n810_i2c_board_info_2,
- 					ARRAY_SIZE(n810_i2c_board_info_2));
- 	board_serial_init();
-+	n8x0_mipid_init();
-+	n8x0_blizzard_init();
- 	omap_sdrc_init(NULL, NULL);
- 	gpmc_onenand_init(board_onenand_data);
- 	n8x0_mmc_init();
---- /dev/null
-+++ b/arch/arm/mach-omap2/board-n8x0-lcd.c
-@@ -0,0 +1,231 @@
-+/*
-+ * linux/arch/arm/mach-omap2/board-n8x0.c
-+ *
-+ * Copyright (C) 2005-2009 Nokia Corporation
-+ * Author: Juha Yrjola <juha.yrjola@nokia.com>
-+ *
-+ * Modified from mach-omap2/board-generic.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/gpio.h>
-+#include <linux/omapfb.h>
-+
-+#include <plat/lcd_mipid.h>
-+#include <plat/blizzard.h>
-+
-+#include "../../../drivers/cbus/tahvo.h"
-+
-+
-+struct tahvo_pwm_device {
-+	struct device *dev;
-+	int tahvo_7bit_backlight;
-+};
-+
-+static struct tahvo_pwm_device *tahvo_pwm;
-+
-+static unsigned int tahvo_pwm_get_backlight_level(struct tahvo_pwm_device *pd)
-+{
-+	unsigned int mask;
-+
-+	if (pd->tahvo_7bit_backlight)
-+		mask = 0x7f;
-+	else
-+		mask = 0x0f;
-+	return tahvo_read_reg(pd->dev, TAHVO_REG_LEDPWMR) & mask;
-+}
-+
-+static unsigned int tahvo_pwm_get_max_backlight_level(struct tahvo_pwm_device *pd)
-+{
-+	if (pd->tahvo_7bit_backlight)
-+		return 0x7f;
-+	return 0x0f;
-+}
-+
-+static void tahvo_pwm_set_backlight_level(struct tahvo_pwm_device *pd, unsigned int level)
-+{
-+	unsigned int max_level;
-+
-+	max_level = tahvo_pwm_get_max_backlight_level(pd);
-+	if (level > max_level)
-+		level = max_level;
-+	tahvo_write_reg(pd->dev, TAHVO_REG_LEDPWMR, level);
-+}
-+
-+static int __init n8x0_tahvo_pwm_probe(struct platform_device *pdev)
-+{
-+	struct tahvo_pwm_device *pd;
-+	unsigned int rev, id;
-+
-+	pd = kzalloc(sizeof(*pd), GFP_KERNEL);
-+	if (WARN_ON(!pd))
-+		return -ENOMEM;
-+	pd->dev = &pdev->dev;
-+
-+	rev = tahvo_read_reg(pd->dev, TAHVO_REG_ASICR);
-+	id = (rev >> 8) & 0xff;
-+	if (id == 0x03) {
-+		if ((rev & 0xff) >= 0x50)
-+			pd->tahvo_7bit_backlight = 1;
-+	} else if (id == 0x0b)
-+		pd->tahvo_7bit_backlight = 1;
-+
-+	dev_set_drvdata(pd->dev, pd);
-+	tahvo_pwm = pd;
-+
-+	return 0;
-+}
-+
-+static struct platform_driver n8x0_tahvo_pwm_driver = {
-+	.driver		= {
-+		.name	= "tahvo-pwm",
-+	},
-+};
-+
-+static int __init n8x0_tahvo_pwm_init(void)
-+{
-+	return platform_driver_probe(&n8x0_tahvo_pwm_driver, n8x0_tahvo_pwm_probe);
-+}
-+fs_initcall(n8x0_tahvo_pwm_init);
-+
-+static int n8x0_get_backlight_level(struct mipid_platform_data *pdata)
-+{
-+	return tahvo_pwm_get_backlight_level(tahvo_pwm);
-+}
-+
-+static int n8x0_get_max_backlight_level(struct mipid_platform_data *pdata)
-+{
-+	return tahvo_pwm_get_max_backlight_level(tahvo_pwm);
-+}
-+
-+static void n8x0_set_backlight_level(struct mipid_platform_data *pdata, int level)
-+{
-+	tahvo_pwm_set_backlight_level(tahvo_pwm, level);
-+}
-+
-+#define N8X0_BLIZZARD_POWERDOWN_GPIO	15
-+
-+// MIPID LCD Panel
-+
-+static void mipid_shutdown(struct mipid_platform_data *pdata)
-+{
-+	if (pdata->nreset_gpio != -1) {
-+		pr_info("shutdown LCD\n");
-+		gpio_set_value(pdata->nreset_gpio, 0);
-+		msleep(120);
-+	}
-+}
-+
-+struct mipid_platform_data n8x0_mipid_platform_data = {
-+	.shutdown = mipid_shutdown,
-+	.get_bklight_level = n8x0_get_backlight_level,
-+	.set_bklight_level = n8x0_set_backlight_level,
-+	.get_bklight_max = n8x0_get_max_backlight_level,
-+};
-+
-+void __init n8x0_mipid_init(void)
-+{
-+	const struct omap_lcd_config *conf;
-+	int err;
-+
-+	conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
-+	if (conf != NULL) {
-+		n8x0_mipid_platform_data.nreset_gpio = conf->nreset_gpio;
-+		n8x0_mipid_platform_data.data_lines = conf->data_lines;
-+		if (conf->nreset_gpio != -1) {
-+			err = gpio_request(conf->nreset_gpio, "MIPID nreset");
-+			if (err) {
-+				printk(KERN_ERR "N8x0 MIPID failed to request nreset GPIO %d\n",
-+				       conf->nreset_gpio);
-+			} else {
-+				err = gpio_direction_output(conf->nreset_gpio, 1);
-+				if (err) {
-+					printk(KERN_ERR "N8x0 MIPID failed to set nreset GPIO %d\n",
-+					       conf->nreset_gpio);
-+				}
-+			}
-+		}
-+		printk(KERN_INFO "N8x0 MIPID config loaded");
-+	}
-+	else
-+		printk(KERN_INFO "N8x0 MIPID config not provided");
-+}
-+
-+
-+// Epson Blizzard LCD Controller
-+
-+static struct {
-+	struct clk *sys_ck;
-+} blizzard;
-+
-+static int blizzard_get_clocks(void)
-+{
-+	blizzard.sys_ck = clk_get(0, "osc_ck");
-+	if (IS_ERR(blizzard.sys_ck)) {
-+		printk(KERN_ERR "can't get Blizzard clock\n");
-+		return PTR_ERR(blizzard.sys_ck);
-+	}
-+	return 0;
-+}
-+
-+static unsigned long blizzard_get_clock_rate(struct device *dev)
-+{
-+	return clk_get_rate(blizzard.sys_ck);
-+}
-+
-+static void blizzard_enable_clocks(int enable)
-+{
-+	if (enable)
-+		clk_enable(blizzard.sys_ck);
-+	else
-+		clk_disable(blizzard.sys_ck);
-+}
-+
-+static void blizzard_power_up(struct device *dev)
-+{
-+	/* Vcore to 1.475V */
-+	tahvo_set_clear_reg_bits(tahvo_pwm->dev, 0x07, 0, 0xf);
-+	msleep(10);
-+
-+	blizzard_enable_clocks(1);
-+	gpio_set_value(N8X0_BLIZZARD_POWERDOWN_GPIO, 1);
-+}
-+
-+static void blizzard_power_down(struct device *dev)
-+{
-+	gpio_set_value(N8X0_BLIZZARD_POWERDOWN_GPIO, 0);
-+	blizzard_enable_clocks(0);
-+
-+	/* Vcore to 1.005V */
-+	tahvo_set_clear_reg_bits(tahvo_pwm->dev, 0x07, 0xf, 0);
-+}
-+
-+static struct blizzard_platform_data n8x0_blizzard_data = {
-+	.power_up	= blizzard_power_up,
-+	.power_down	= blizzard_power_down,
-+	.get_clock_rate	= blizzard_get_clock_rate,
-+	.te_connected	= 1,
-+};
-+
-+void __init n8x0_blizzard_init(void)
-+{
-+	int r;
-+
-+	r = gpio_request(N8X0_BLIZZARD_POWERDOWN_GPIO, "Blizzard pd");
-+	if (r < 0)
-+	{
-+		printk(KERN_ERR "Can't get N8x0 Blizzard powerdown GPIO %d\n", N8X0_BLIZZARD_POWERDOWN_GPIO);
-+		return;
-+	}
-+	gpio_direction_output(N8X0_BLIZZARD_POWERDOWN_GPIO, 1);
-+
-+	blizzard_get_clocks();
-+	omapfb_set_ctrl_platform_data(&n8x0_blizzard_data);
-+
-+	printk(KERN_INFO "N8x0 Blizzard initialized");
-+}
---- a/arch/arm/mach-omap2/Makefile
-+++ b/arch/arm/mach-omap2/Makefile
-@@ -205,6 +205,7 @@ obj-$(CONFIG_MACH_OMAP3EVM)		+= board-om
- obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o
- obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o
- obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
-+obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0-lcd.o
- obj-$(CONFIG_MACH_NOKIA_RM680)		+= board-rm680.o \
- 					   sdram-nokia.o
- obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
diff --git a/target/linux/omap24xx/patches-3.3/311-omapfb-clock-fixes.patch b/target/linux/omap24xx/patches-3.3/311-omapfb-clock-fixes.patch
deleted file mode 100644
index 6df6958204..0000000000
--- a/target/linux/omap24xx/patches-3.3/311-omapfb-clock-fixes.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/drivers/video/omap/dispc.c
-+++ b/drivers/video/omap/dispc.c
-@@ -923,14 +923,14 @@ static int get_dss_clocks(void)
- 		return PTR_ERR(dispc.dss_ick);
- 	}
- 
--	dispc.dss1_fck = clk_get(&dispc.fbdev->dssdev->dev, "fck");
-+	dispc.dss1_fck = clk_get(&dispc.fbdev->dssdev->dev, "dss1_fck");
- 	if (IS_ERR(dispc.dss1_fck)) {
- 		dev_err(dispc.fbdev->dev, "can't get dss1_fck\n");
- 		clk_put(dispc.dss_ick);
- 		return PTR_ERR(dispc.dss1_fck);
- 	}
- 
--	dispc.dss_54m_fck = clk_get(&dispc.fbdev->dssdev->dev, "tv_clk");
-+	dispc.dss_54m_fck = clk_get(&dispc.fbdev->dssdev->dev, "dss_54m_fck");
- 	if (IS_ERR(dispc.dss_54m_fck)) {
- 		dev_err(dispc.fbdev->dev, "can't get tv_fck\n");
- 		clk_put(dispc.dss_ick);
---- a/drivers/video/omap/rfbi.c
-+++ b/drivers/video/omap/rfbi.c
-@@ -90,7 +90,7 @@ static int rfbi_get_clocks(void)
- 		return PTR_ERR(rfbi.dss_ick);
- 	}
- 
--	rfbi.dss1_fck = clk_get(&rfbi.fbdev->dssdev->dev, "fck");
-+	rfbi.dss1_fck = clk_get(&rfbi.fbdev->dssdev->dev, "dss1_fck");
- 	if (IS_ERR(rfbi.dss1_fck)) {
- 		dev_err(rfbi.fbdev->dev, "can't get dss1_fck\n");
- 		clk_put(rfbi.dss_ick);
diff --git a/target/linux/omap24xx/patches-3.3/312-no-hwmod-reset.patch b/target/linux/omap24xx/patches-3.3/312-no-hwmod-reset.patch
deleted file mode 100644
index 65c14ab3a7..0000000000
--- a/target/linux/omap24xx/patches-3.3/312-no-hwmod-reset.patch
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/arch/arm/mach-omap2/omap_hwmod.c
-+++ b/arch/arm/mach-omap2/omap_hwmod.c
-@@ -146,6 +146,8 @@
- #include <plat/omap_hwmod.h>
- #include <plat/prcm.h>
- 
-+#include <asm/mach-types.h>
-+
- #include "cm2xxx_3xxx.h"
- #include "cminst44xx.h"
- #include "prm2xxx_3xxx.h"
-@@ -1769,6 +1771,16 @@ static int _setup(struct omap_hwmod *oh,
- 
- 	oh->_state = _HWMOD_STATE_INITIALIZED;
- 
-+	if (machine_is_nokia770() ||
-+	    machine_is_nokia_n800() ||
-+	    machine_is_nokia_n810() ||
-+	    machine_is_nokia_n810_wimax()) {
-+		/* Nokia N-series workaround: Don't reset any hwmod. Some drivers expect
-+		 * the NOLO bootloader initializations to be effective. */
-+		oh->flags |= HWMOD_INIT_NO_RESET;
-+		printk_once(KERN_INFO "Nokia N-series HWMOD_INIT_NO_RESET workaround enabled\n");
-+	}
-+
- 	/*
- 	 * In the case of hwmod with hardreset that should not be
- 	 * de-assert at boot time, we have to keep the module
diff --git a/target/linux/omap24xx/patches-3.3/315-n800-touchscreen-and-keypad-drivers.patch b/target/linux/omap24xx/patches-3.3/315-n800-touchscreen-and-keypad-drivers.patch
deleted file mode 100644
index 106a5d80c8..0000000000
--- a/target/linux/omap24xx/patches-3.3/315-n800-touchscreen-and-keypad-drivers.patch
+++ /dev/null
@@ -1,2791 +0,0 @@
-From 63e56392b9024aceb610d7b4e1979e2d2cebd217 Mon Sep 17 00:00:00 2001
-From: Marat Radchenko <marat@slonopotamus.org>
-Date: Tue, 18 Oct 2011 21:48:23 +0400
-Subject: [PATCH 1/2] TSC2301 driver (touchscreen and keypad)
-
-This patch adds support for TSC2301 touchscreen/keypad/audio chip found on Nokia N800.
-Touchscreen and keypad are fully functional, audio part only provides power management.
----
- drivers/input/keyboard/Kconfig         |    6 +
- drivers/input/keyboard/Makefile        |    1 +
- drivers/input/keyboard/tsc2301_kp.c    |  475 +++++++++++++++
- drivers/input/touchscreen/Kconfig      |    6 +
- drivers/input/touchscreen/Makefile     |    1 +
- drivers/input/touchscreen/tsc2301_ts.c |  676 +++++++++++++++++++++
- drivers/spi/Kconfig                    |   22 +
- drivers/spi/Makefile                   |    3 +
- drivers/spi/tsc2301-core.c             |  297 ++++++++++
- drivers/spi/tsc2301-mixer.c            | 1003 ++++++++++++++++++++++++++++++++
- include/linux/spi/tsc2301.h            |  208 +++++++
- 11 files changed, 2698 insertions(+), 0 deletions(-)
- create mode 100644 drivers/input/keyboard/tsc2301_kp.c
- create mode 100644 drivers/input/touchscreen/tsc2301_ts.c
- create mode 100644 drivers/spi/tsc2301-core.c
- create mode 100644 drivers/spi/tsc2301-mixer.c
- create mode 100644 include/linux/spi/tsc2301.h
-
---- a/drivers/input/keyboard/Kconfig
-+++ b/drivers/input/keyboard/Kconfig
-@@ -547,6 +547,12 @@ config KEYBOARD_TNETV107X
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called tnetv107x-keypad.
- 
-+config KEYBOARD_TSC2301
-+	tristate "TSC2301 keypad support"
-+	depends on SPI_TSC2301
-+	help
-+	  Say Y here for if you are using the keypad features of TSC2301.
-+
- config KEYBOARD_TWL4030
- 	tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
- 	depends on TWL4030_CORE
---- a/drivers/input/keyboard/Makefile
-+++ b/drivers/input/keyboard/Makefile
-@@ -49,6 +49,7 @@ obj-$(CONFIG_KEYBOARD_SUNKBD)		+= sunkbd
- obj-$(CONFIG_KEYBOARD_TC3589X)		+= tc3589x-keypad.o
- obj-$(CONFIG_KEYBOARD_TEGRA)		+= tegra-kbc.o
- obj-$(CONFIG_KEYBOARD_TNETV107X)	+= tnetv107x-keypad.o
-+obj-$(CONFIG_KEYBOARD_TSC2301)		+= tsc2301_kp.o
- obj-$(CONFIG_KEYBOARD_TWL4030)		+= twl4030_keypad.o
- obj-$(CONFIG_KEYBOARD_XTKBD)		+= xtkbd.o
- obj-$(CONFIG_KEYBOARD_W90P910)		+= w90p910_keypad.o
---- /dev/null
-+++ b/drivers/input/keyboard/tsc2301_kp.c
-@@ -0,0 +1,475 @@
-+/*
-+ * TSC2301 keypad driver
-+ *
-+ * Copyright (C) 2005-2006 Nokia Corporation
-+ *
-+ * Written by Jarkko Oikarinen
-+ * Rewritten by Juha Yrjola <juha.yrjola@nokia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/input.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/delay.h>
-+#include <linux/spi/spi.h>
-+
-+#include <linux/spi/tsc2301.h>
-+
-+#define TSC2301_KEYBOARD_PRODUCT_ID      0x0051
-+#define TSC2301_KEYBOARD_PRODUCT_VERSION 0x0001
-+#define TSC2301_DEBOUNCE_TIME_2MS        0x0000
-+#define TSC2301_DEBOUNCE_TIME_10MS       0x0800
-+#define TSC2301_DEBOUNCE_TIME_20MS       0x1000
-+#define TSC2301_DEBOUNCE_TIME_50MS       0x1800
-+#define TSC2301_DEBOUNCE_TIME_60MS       0x2000
-+#define TSC2301_DEBOUNCE_TIME_80MS       0x2800
-+#define TSC2301_DEBOUNCE_TIME_100MS      0x3000
-+#define TSC2301_DEBOUNCE_TIME_120MS      0x3800
-+
-+#define TSC2301_DEBOUNCE_TIME		TSC2301_DEBOUNCE_TIME_20MS
-+
-+#define TSC2301_RELEASE_TIMEOUT		50
-+
-+struct tsc2301_kp {
-+	struct input_dev	*idev;
-+	char			phys[32];
-+	spinlock_t		lock;
-+	struct mutex		mutex;
-+	struct timer_list	timer;
-+	u16			keys_pressed;
-+	unsigned		pending:1;
-+	unsigned		user_disabled:1;
-+	unsigned		disable_depth;
-+
-+	struct spi_transfer	read_xfer[4];
-+	struct spi_message	read_msg;
-+
-+	u16			data;
-+	u16			mask;
-+
-+	int			irq;
-+	s16			keymap[16];
-+};
-+
-+static inline int tsc2301_kp_disabled(struct tsc2301 *tsc)
-+{
-+	return tsc->kp->disable_depth != 0;
-+}
-+
-+static void tsc2301_kp_send_key_events(struct tsc2301 *tsc,
-+				       u16 prev_state,
-+				       u16 new_state)
-+{
-+	struct tsc2301_kp *kp = tsc->kp;
-+	u16 common, released, pressed;
-+	int i;
-+
-+	common = prev_state & new_state;
-+	released = common ^ prev_state;
-+	pressed = common ^ new_state;
-+	if (!released && !pressed)
-+		return;
-+	for (i = 0; i < 16 && (released || pressed); i++) {
-+		if (released & 1) {
-+			dev_dbg(&tsc->spi->dev, "key %d released\n", i);
-+			input_report_key(kp->idev, kp->keymap[i], 0);
-+		}
-+		released >>= 1;
-+		if (pressed & 1) {
-+			dev_dbg(&tsc->spi->dev, "key %d pressed\n", i);
-+			input_report_key(kp->idev, kp->keymap[i], 1);
-+		}
-+		pressed >>= 1;
-+	}
-+	input_sync(kp->idev);
-+}
-+
-+static inline void _filter_out(struct tsc2301 *tsc, u16 prev_state,
-+			       u16 *new_state, int row1, int row2, u8 rect_pat)
-+{
-+	u16 mask;
-+
-+	mask = (rect_pat << (row1 * 4)) | (rect_pat << (row2 * 4));
-+	mask &= ~prev_state;
-+	*new_state &= ~mask;
-+	dev_dbg(&tsc->spi->dev, "filtering ghost keys %02x\n", mask);
-+}
-+
-+static void tsc2301_filter_ghost_keys(struct tsc2301 *tsc, u16 prev_state,
-+				      u16 *new_state)
-+{
-+	int row1, row2;
-+	u16 key_map;
-+	u16 row1_map;
-+	static const u8 rect_pat[] = {
-+		0x3, 0x5, 0x9, 0x6, 0xa, 0xc, 0,
-+	};
-+
-+	key_map = *new_state;
-+	for (row1 = 0; row1 < 4; row1++) {
-+		row1_map = (key_map >> (row1 * 4)) & 0xf;
-+		if (!row1_map)
-+			continue;
-+		for (row2 = row1 + 1; row2 < 4; row2++) {
-+			u16 rect_map = (key_map >> (row2 * 4)) & 0xf;
-+			const u8 *rp;
-+
-+			rect_map &= row1_map;
-+			if (!rect_map)
-+				continue;
-+			for (rp = rect_pat; *rp; rp++)
-+				if ((rect_map & *rp) == *rp)
-+					_filter_out(tsc, prev_state, new_state,
-+						    row1, row2, *rp);
-+		}
-+	}
-+}
-+
-+static void tsc2301_kp_timer(unsigned long arg)
-+{
-+	struct tsc2301 *tsc = (void *) arg;
-+	struct tsc2301_kp *kp = tsc->kp;
-+	unsigned long flags;
-+
-+	tsc2301_kp_send_key_events(tsc, kp->keys_pressed, 0);
-+	spin_lock_irqsave(&kp->lock, flags);
-+	kp->keys_pressed = 0;
-+	spin_unlock_irqrestore(&kp->lock, flags);
-+}
-+
-+static void tsc2301_kp_rx(void *arg)
-+{
-+	struct tsc2301 *tsc = arg;
-+	struct tsc2301_kp *kp = tsc->kp;
-+	unsigned long flags;
-+	u16 kp_data;
-+
-+	kp_data = kp->data;
-+	dev_dbg(&tsc->spi->dev, "KP data %04x\n", kp_data);
-+
-+	tsc2301_filter_ghost_keys(tsc, kp->keys_pressed, &kp_data);
-+	tsc2301_kp_send_key_events(tsc, kp->keys_pressed, kp_data);
-+	spin_lock_irqsave(&kp->lock, flags);
-+	kp->keys_pressed = kp_data;
-+	kp->pending = 0;
-+	spin_unlock_irqrestore(&kp->lock, flags);
-+}
-+
-+static irqreturn_t tsc2301_kp_irq_handler(int irq, void *dev_id)
-+{
-+	struct tsc2301 *tsc = dev_id;
-+	struct tsc2301_kp *kp = tsc->kp;
-+	unsigned long flags;
-+	int r;
-+
-+	spin_lock_irqsave(&kp->lock, flags);
-+	if (tsc2301_kp_disabled(tsc)) {
-+		spin_unlock_irqrestore(&kp->lock, flags);
-+		return IRQ_HANDLED;
-+	}
-+	kp->pending = 1;
-+	spin_unlock_irqrestore(&kp->lock, flags);
-+	mod_timer(&kp->timer,
-+		 jiffies + msecs_to_jiffies(TSC2301_RELEASE_TIMEOUT));
-+	r = spi_async(tsc->spi, &tsc->kp->read_msg);
-+	if (r)
-+		dev_err(&tsc->spi->dev, "kp: spi_async() failed");
-+	return IRQ_HANDLED;
-+}
-+
-+static void tsc2301_kp_start_scan(struct tsc2301 *tsc)
-+{
-+	tsc2301_write_reg(tsc, TSC2301_REG_KPMASK, tsc->kp->mask);
-+	tsc2301_write_reg(tsc, TSC2301_REG_KEY, TSC2301_DEBOUNCE_TIME);
-+}
-+
-+static void tsc2301_kp_stop_scan(struct tsc2301 *tsc)
-+{
-+	tsc2301_write_reg(tsc, TSC2301_REG_KEY, 1 << 14);
-+}
-+
-+/* Must be called with the mutex held */
-+static void tsc2301_kp_enable(struct tsc2301 *tsc)
-+{
-+	struct tsc2301_kp *kp = tsc->kp;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&kp->lock, flags);
-+	BUG_ON(!tsc2301_kp_disabled(tsc));
-+	if (--kp->disable_depth != 0) {
-+		spin_unlock_irqrestore(&kp->lock, flags);
-+		return;
-+	}
-+	spin_unlock_irqrestore(&kp->lock, flags);
-+
-+	irq_set_irq_type(kp->irq, IRQ_TYPE_EDGE_FALLING);
-+	tsc2301_kp_start_scan(tsc);
-+	enable_irq(kp->irq);
-+}
-+
-+/* Must be called with the mutex held */
-+static int tsc2301_kp_disable(struct tsc2301 *tsc, int release_keys)
-+{
-+	struct tsc2301_kp *kp = tsc->kp;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&kp->lock, flags);
-+	if (kp->disable_depth++ != 0) {
-+		spin_unlock_irqrestore(&kp->lock, flags);
-+		goto out;
-+	}
-+	disable_irq_nosync(kp->irq);
-+	irq_set_irq_type(kp->irq, IRQ_TYPE_NONE);
-+	spin_unlock_irqrestore(&kp->lock, flags);
-+
-+	while (kp->pending) {
-+		msleep(1);
-+	}
-+
-+	tsc2301_kp_stop_scan(tsc);
-+out:
-+	if (!release_keys)
-+		del_timer(&kp->timer); /* let timeout release keys */
-+
-+	return 0;
-+}
-+
-+/* The following workaround is needed for a HW bug triggered by the
-+ * following:
-+ * 1. keep any key pressed
-+ * 2. disable keypad
-+ * 3. release all keys
-+ * 4. reenable keypad
-+ * 5. disable touch screen controller
-+ *
-+ * After this the keypad scanner will get stuck in busy state and won't
-+ * report any interrupts for further keypresses. One way to recover is to
-+ * restart the keypad scanner whenever we enable / disable the
-+ * touchscreen controller.
-+ */
-+void tsc2301_kp_restart(struct tsc2301 *tsc)
-+{
-+	if (!tsc2301_kp_disabled(tsc)) {
-+		tsc2301_kp_start_scan(tsc);
-+	}
-+}
-+
-+static ssize_t tsc2301_kp_disable_show(struct device *dev,
-+				       struct device_attribute *attr, char *buf)
-+{
-+	struct tsc2301		*tsc = dev_get_drvdata(dev);
-+
-+	return sprintf(buf, "%u\n", tsc2301_kp_disabled(tsc) ? 1 : 0);
-+}
-+
-+static ssize_t tsc2301_kp_disable_store(struct device *dev,
-+					struct device_attribute *attr,
-+					const char *buf, size_t count)
-+{
-+	struct tsc2301		*tsc = dev_get_drvdata(dev);
-+	struct tsc2301_kp	*kp = tsc->kp;
-+	char *endp;
-+	int i;
-+
-+	i = simple_strtoul(buf, &endp, 10);
-+	i = i ? 1 : 0;
-+
-+	mutex_lock(&kp->mutex);
-+	if (i == kp->user_disabled) {
-+		mutex_unlock(&kp->mutex);
-+		return count;
-+	}
-+	kp->user_disabled = i;
-+
-+	if (i)
-+		tsc2301_kp_disable(tsc, 1);
-+	else
-+		tsc2301_kp_enable(tsc);
-+	mutex_unlock(&kp->mutex);
-+
-+	return count;
-+}
-+
-+static DEVICE_ATTR(disable_kp, 0664, tsc2301_kp_disable_show,
-+		   tsc2301_kp_disable_store);
-+
-+static const u16 tsc2301_kp_read_data = 0x8000 | TSC2301_REG_KPDATA;
-+
-+static void tsc2301_kp_setup_spi_xfer(struct tsc2301 *tsc)
-+{
-+	struct tsc2301_kp *kp = tsc->kp;
-+	struct spi_message *m = &kp->read_msg;
-+	struct spi_transfer *x = &kp->read_xfer[0];
-+
-+	spi_message_init(&kp->read_msg);
-+
-+	x->tx_buf = &tsc2301_kp_read_data;
-+	x->len = 2;
-+	spi_message_add_tail(x, m);
-+	x++;
-+
-+	x->rx_buf = &kp->data;
-+	x->len = 2;
-+	spi_message_add_tail(x, m);
-+
-+	m->complete = tsc2301_kp_rx;
-+	m->context = tsc;
-+}
-+
-+#ifdef CONFIG_PM
-+int tsc2301_kp_suspend(struct tsc2301 *tsc)
-+{
-+	struct tsc2301_kp *kp = tsc->kp;
-+
-+	mutex_lock(&kp->mutex);
-+	tsc2301_kp_disable(tsc, 1);
-+	mutex_unlock(&kp->mutex);
-+	return 0;
-+}
-+
-+void tsc2301_kp_resume(struct tsc2301 *tsc)
-+{
-+	struct tsc2301_kp *kp = tsc->kp;
-+
-+	mutex_lock(&kp->mutex);
-+	tsc2301_kp_enable(tsc);
-+	mutex_unlock(&kp->mutex);
-+}
-+#endif
-+
-+int __devinit tsc2301_kp_init(struct tsc2301 *tsc,
-+			      struct tsc2301_platform_data *pdata)
-+{
-+	struct input_dev *idev;
-+	struct tsc2301_kp *kp;
-+	int r, i;
-+	u16 mask;
-+
-+	if (pdata->keyb_int < 0) {
-+		dev_err(&tsc->spi->dev, "need kbirq");
-+		return -EINVAL;
-+	}
-+
-+	kp = kzalloc(sizeof(*kp), GFP_KERNEL);
-+	if (kp == NULL)
-+		return -ENOMEM;
-+	tsc->kp = kp;
-+
-+	kp->irq = pdata->keyb_int;
-+	spin_lock_init(&kp->lock);
-+	mutex_init(&kp->mutex);
-+
-+	init_timer(&kp->timer);
-+	kp->timer.data = (unsigned long) tsc;
-+	kp->timer.function = tsc2301_kp_timer;
-+
-+	idev = input_allocate_device();
-+	if (idev == NULL) {
-+		r = -ENOMEM;
-+		goto err1;
-+	}
-+	if (pdata->keyb_name)
-+		idev->name = pdata->keyb_name;
-+	else
-+		idev->name = "TSC2301 keypad";
-+	snprintf(kp->phys, sizeof(kp->phys), "%s/input-kp", dev_name(&tsc->spi->dev));
-+	idev->phys = kp->phys;
-+
-+	mask = 0;
-+	idev->evbit[0] = BIT(EV_KEY);
-+	for (i = 0; i < 16; i++) {
-+		if (pdata->keymap[i] > 0) {
-+			set_bit(pdata->keymap[i], idev->keybit);
-+			kp->keymap[i] = pdata->keymap[i];
-+		} else {
-+			kp->keymap[i] = -1;
-+			mask |= 1 << i;
-+		}
-+	}
-+
-+	if (pdata->kp_rep)
-+		set_bit(EV_REP, idev->evbit);
-+
-+	kp->idev = idev;
-+
-+	tsc2301_kp_setup_spi_xfer(tsc);
-+
-+	r = device_create_file(&tsc->spi->dev, &dev_attr_disable_kp);
-+	if (r < 0)
-+		goto err2;
-+
-+	tsc2301_kp_start_scan(tsc);
-+
-+	/* IRQ mode 0 is faulty, it can cause the KBIRQ to get stuck.
-+	 * Mode 2 deasserts the IRQ at:
-+	 * - HW or SW reset
-+	 * - Setting SCS flag in REG_KEY register
-+	 * - Releasing all keys
-+	 * - Reading the REG_KPDATA
-+	 */
-+	tsc2301_write_kbc(tsc, 2);
-+
-+	tsc2301_write_reg(tsc, TSC2301_REG_KPMASK, mask);
-+	kp->mask = mask;
-+
-+	irq_set_irq_type(kp->irq, IRQ_TYPE_EDGE_FALLING);
-+
-+	r = request_irq(kp->irq, tsc2301_kp_irq_handler, 0,
-+			"tsc2301-kp", tsc);
-+	if (r < 0) {
-+		dev_err(&tsc->spi->dev, "unable to get kbirq IRQ");
-+		goto err3;
-+	}
-+	irq_set_irq_wake(kp->irq, 1);
-+
-+	/* We need to read the register once..? */
-+	tsc2301_read_reg(tsc, TSC2301_REG_KPDATA);
-+
-+	r = input_register_device(idev);
-+	if (r < 0) {
-+		dev_err(&tsc->spi->dev, "can't register keypad device\n");
-+		goto err4;
-+	}
-+
-+	return 0;
-+
-+err4:
-+	free_irq(kp->irq, tsc);
-+err3:
-+	tsc2301_kp_stop_scan(tsc);
-+	device_remove_file(&tsc->spi->dev, &dev_attr_disable_kp);
-+err2:
-+	input_free_device(kp->idev);
-+err1:
-+	kfree(kp);
-+	return r;
-+}
-+
-+void __devexit tsc2301_kp_exit(struct tsc2301 *tsc)
-+{
-+	struct tsc2301_kp *kp = tsc->kp;
-+
-+	tsc2301_kp_disable(tsc, 1);
-+	input_unregister_device(kp->idev);
-+	free_irq(kp->irq, tsc);
-+	device_remove_file(&tsc->spi->dev, &dev_attr_disable_kp);
-+
-+	kfree(kp);
-+}
---- a/drivers/input/touchscreen/Kconfig
-+++ b/drivers/input/touchscreen/Kconfig
-@@ -726,6 +726,12 @@ config TOUCHSCREEN_TSC2007
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called tsc2007.
- 
-+config TOUCHSCREEN_TSC2301
-+	tristate "TSC2301 touchscreen support"
-+	depends on SPI_TSC2301
-+	help
-+	  Say Y here for if you are using the touchscreen features of TSC2301.
-+
- config TOUCHSCREEN_W90X900
- 	tristate "W90P910 touchscreen driver"
- 	depends on HAVE_CLK
---- a/drivers/input/touchscreen/Makefile
-+++ b/drivers/input/touchscreen/Makefile
-@@ -52,6 +52,7 @@ obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN)	+= to
- obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO)	+= tsc40.o
- obj-$(CONFIG_TOUCHSCREEN_TSC2005)	+= tsc2005.o
- obj-$(CONFIG_TOUCHSCREEN_TSC2007)	+= tsc2007.o
-+obj-$(CONFIG_TOUCHSCREEN_TSC2301)	+= tsc2301_ts.o
- obj-$(CONFIG_TOUCHSCREEN_UCB1400)	+= ucb1400_ts.o
- obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001)	+= wacom_w8001.o
- obj-$(CONFIG_TOUCHSCREEN_WM831X)	+= wm831x-ts.o
---- /dev/null
-+++ b/drivers/input/touchscreen/tsc2301_ts.c
-@@ -0,0 +1,676 @@
-+/*
-+ * TSC2301 touchscreen driver
-+ *
-+ * Copyright (C) 2005-2008 Nokia Corporation
-+ *
-+ * Written by Jarkko Oikarinen, Imre Deak and Juha Yrjola
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/input.h>
-+#include <linux/interrupt.h>
-+#include <linux/delay.h>
-+#include <linux/spi/spi.h>
-+
-+#include <linux/spi/tsc2301.h>
-+
-+/**
-+ * The touchscreen interface operates as follows:
-+ *
-+ * Initialize:
-+ *    Request access to GPIO103 (DAV)
-+ *    tsc2301_ts_irq_handler will trigger when DAV line goes down
-+ *
-+ *  1) Pen is pressed against touchscreeen
-+ *  2) TSC2301 performs AD conversion
-+ *  3) After the conversion is done TSC2301 drives DAV line down
-+ *  4) GPIO IRQ is received and tsc2301_ts_irq_handler is called
-+ *  5) tsc2301_ts_irq_handler queues up an spi transfer to fetch
-+ *     the x, y, z1, z2 values
-+ *  6) SPI framework calls tsc2301_ts_rx after the coordinates are read
-+ *  7) When the penup_timer expires, there have not been DAV interrupts
-+ *     during the last 20ms which means the pen has been lifted.
-+ */
-+
-+
-+#define TSC2301_TOUCHSCREEN_PRODUCT_ID      		0x0052
-+#define TSC2301_TOUCHSCREEN_PRODUCT_VERSION 		0x0001
-+
-+#define TSC2301_TS_PENUP_TIME		     		20
-+
-+#define TSC2301_ADCREG_CONVERSION_CTRL_BY_TSC2301	0x8000
-+#define TSC2301_ADCREG_CONVERSION_CTRL_BY_HOST		0x0000
-+
-+#define TSC2301_ADCREG_FUNCTION_NONE			0x0000
-+#define TSC2301_ADCREG_FUNCTION_XY			0x0400
-+#define TSC2301_ADCREG_FUNCTION_XYZ			0x0800
-+#define TSC2301_ADCREG_FUNCTION_X			0x0C00
-+#define TSC2301_ADCREG_FUNCTION_Y			0x1000
-+#define TSC2301_ADCREG_FUNCTION_Z			0x1400
-+#define TSC2301_ADCREG_FUNCTION_DAT1			0x1800
-+#define TSC2301_ADCREG_FUNCTION_DAT2			0x1C00
-+#define TSC2301_ADCREG_FUNCTION_AUX1			0x2000
-+#define TSC2301_ADCREG_FUNCTION_AUX2			0x2400
-+#define TSC2301_ADCREG_FUNCTION_TEMP			0x2800
-+
-+#define TSC2301_ADCREG_RESOLUTION_8BIT			0x0100
-+#define TSC2301_ADCREG_RESOLUTION_10BIT			0x0200
-+#define TSC2301_ADCREG_RESOLUTION_12BIT			0x0300
-+
-+#define TSC2301_ADCREG_AVERAGING_NONE			0x0000
-+#define TSC2301_ADCREG_AVERAGING_4AVG			0x0040
-+#define TSC2301_ADCREG_AVERAGING_8AVG			0x0080
-+#define TSC2301_ADCREG_AVERAGING_16AVG			0x00C0
-+
-+#define TSC2301_ADCREG_CLOCK_8MHZ			0x0000
-+#define TSC2301_ADCREG_CLOCK_4MHZ			0x0010
-+#define TSC2301_ADCREG_CLOCK_2MHZ			0x0020
-+#define TSC2301_ADCREG_CLOCK_1MHZ			0x0030
-+
-+#define TSC2301_ADCREG_VOLTAGE_STAB_0US			0x0000
-+#define TSC2301_ADCREG_VOLTAGE_STAB_100US		0x0002
-+#define TSC2301_ADCREG_VOLTAGE_STAB_500US		0x0004
-+#define TSC2301_ADCREG_VOLTAGE_STAB_1MS			0x0006
-+#define TSC2301_ADCREG_VOLTAGE_STAB_5MS			0x0008
-+#define TSC2301_ADCREG_VOLTAGE_STAB_10MS		0x000A
-+#define TSC2301_ADCREG_VOLTAGE_STAB_50MS		0x000C
-+#define TSC2301_ADCREG_VOLTAGE_STAB_100MS		0x000E
-+
-+#define TSC2301_ADCREG_STOP_CONVERSION			0x4000
-+
-+#define MAX_12BIT					((1 << 12) - 1)
-+
-+#define TS_RECT_SIZE					8
-+#define TSF_MIN_Z1					100
-+#define TSF_MAX_Z2					4000
-+
-+#define TSF_SAMPLES					4
-+
-+struct ts_filter {
-+	int			sample_cnt;
-+
-+	int 			avg_x;
-+	int 			avg_y;
-+	int 			avg_z1;
-+	int 			avg_z2;
-+};
-+
-+struct ts_coords {
-+	u16 			x;
-+	u16 			y;
-+	u16 			z1;
-+	u16 			z2;
-+};
-+
-+struct tsc2301_ts {
-+	struct input_dev	*idev;
-+	char			phys[32];
-+	struct timer_list	penup_timer;
-+	struct mutex		mutex;
-+
-+	struct spi_transfer	read_xfer[2];
-+	struct spi_message	read_msg;
-+	struct ts_coords	*coords;
-+
-+	struct ts_filter	filter;
-+
-+	int			hw_avg_max;
-+	u16			x;
-+	u16			y;
-+	u16			p;
-+
-+	u16			x_plate_ohm;
-+	int			stab_time;
-+	int			max_pressure;
-+	int			touch_pressure;
-+
-+	u8			event_sent;
-+	u8			pen_down;
-+	u8			disabled;
-+	u8			disable_depth;
-+
-+	int			hw_flags;
-+	int			irq;
-+};
-+
-+
-+static const u16 tsc2301_ts_read_data = 0x8000 | TSC2301_REG_X;
-+
-+static int tsc2301_ts_check_config(struct tsc2301_ts *ts, int *hw_flags)
-+{
-+	int flags;
-+
-+	flags = 0;
-+	switch (ts->hw_avg_max) {
-+	case 0:
-+		flags |= TSC2301_ADCREG_AVERAGING_NONE;
-+		break;
-+	case 4:
-+		flags |= TSC2301_ADCREG_AVERAGING_4AVG;
-+		break;
-+	case 8:
-+		flags |= TSC2301_ADCREG_AVERAGING_8AVG;
-+		break;
-+	case 16:
-+		flags |= TSC2301_ADCREG_AVERAGING_16AVG;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	switch (ts->stab_time) {
-+	case 0:
-+		flags |= TSC2301_ADCREG_VOLTAGE_STAB_0US;
-+		break;
-+	case 100:
-+		flags |= TSC2301_ADCREG_VOLTAGE_STAB_100US;
-+		break;
-+	case 500:
-+		flags |= TSC2301_ADCREG_VOLTAGE_STAB_500US;
-+		break;
-+	case 1000:
-+		flags |= TSC2301_ADCREG_VOLTAGE_STAB_1MS;
-+		break;
-+	case 5000:
-+		flags |= TSC2301_ADCREG_VOLTAGE_STAB_5MS;
-+		break;
-+	case 10000:
-+		flags |= TSC2301_ADCREG_VOLTAGE_STAB_10MS;
-+		break;
-+	case 50000:
-+		flags |= TSC2301_ADCREG_VOLTAGE_STAB_50MS;
-+		break;
-+	case 100000:
-+		flags |= TSC2301_ADCREG_VOLTAGE_STAB_100MS;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	*hw_flags = flags;
-+	return 0;
-+}
-+
-+/*
-+ * This odd three-time initialization is to work around a bug in TSC2301.
-+ * See TSC2301 errata for details.
-+ */
-+static int tsc2301_ts_configure(struct tsc2301 *tsc, int flags)
-+{
-+	struct spi_transfer xfer[5];
-+	struct spi_transfer *x;
-+	struct spi_message m;
-+	int i;
-+	u16 val1, val2, val3;
-+	u16 data[10];
-+
-+	val1 = TSC2301_ADCREG_CONVERSION_CTRL_BY_HOST |
-+		TSC2301_ADCREG_STOP_CONVERSION |
-+		TSC2301_ADCREG_FUNCTION_NONE |
-+		TSC2301_ADCREG_RESOLUTION_12BIT |
-+		TSC2301_ADCREG_AVERAGING_NONE |
-+		TSC2301_ADCREG_CLOCK_2MHZ |
-+		TSC2301_ADCREG_VOLTAGE_STAB_100MS;
-+
-+	val2 = TSC2301_ADCREG_CONVERSION_CTRL_BY_HOST |
-+		TSC2301_ADCREG_FUNCTION_XYZ |
-+		TSC2301_ADCREG_RESOLUTION_12BIT |
-+		TSC2301_ADCREG_AVERAGING_16AVG |
-+		TSC2301_ADCREG_CLOCK_1MHZ |
-+		TSC2301_ADCREG_VOLTAGE_STAB_100MS;
-+
-+	/* Averaging and voltage stabilization settings in flags */
-+	val3 = TSC2301_ADCREG_CONVERSION_CTRL_BY_TSC2301 |
-+		TSC2301_ADCREG_FUNCTION_XYZ |
-+		TSC2301_ADCREG_RESOLUTION_12BIT |
-+		TSC2301_ADCREG_CLOCK_2MHZ |
-+		flags;
-+
-+	/* Now we prepare the command for transferring */
-+	data[0] = TSC2301_REG_ADC;
-+	data[1] = val1;
-+	data[2] = TSC2301_REG_ADC;
-+	data[3] = val2;
-+	data[4] = TSC2301_REG_ADC;
-+	data[5] = val3;
-+	data[6] = TSC2301_REG_REF;
-+	data[7] = 1 << 4 | 1 << 2 | 1; /* intref, 100uS settl, 2.5V ref */
-+	data[8] = TSC2301_REG_CONFIG;
-+	data[9] = 3 << 3 | 2 << 0; /* 340uS pre-chrg, 544us delay */
-+
-+	spi_message_init(&m);
-+	m.spi = tsc->spi;
-+
-+	memset(xfer, 0, sizeof(xfer));
-+	x = &xfer[0];
-+
-+	for (i = 0; i < 10; i += 2) {
-+		x->tx_buf = &data[i];
-+		x->len = 4;
-+		if (i != 8)
-+			x->cs_change = 1;
-+		spi_message_add_tail(x, &m);
-+		x++;
-+	}
-+	spi_sync(m.spi, &m);
-+
-+	return 0;
-+}
-+
-+static void tsc2301_ts_start_scan(struct tsc2301 *tsc)
-+{
-+	tsc2301_ts_configure(tsc, tsc->ts->hw_flags);
-+	tsc2301_kp_restart(tsc);
-+}
-+
-+static void tsc2301_ts_stop_scan(struct tsc2301 *tsc)
-+{
-+	tsc2301_write_reg(tsc, TSC2301_REG_ADC, TSC2301_ADCREG_STOP_CONVERSION);
-+	tsc2301_kp_restart(tsc);
-+}
-+
-+static void update_pen_state(struct tsc2301_ts *ts, int x, int y, int pressure)
-+{
-+	if (pressure) {
-+		input_report_abs(ts->idev, ABS_X, x);
-+		input_report_abs(ts->idev, ABS_Y, y);
-+		input_report_abs(ts->idev, ABS_PRESSURE, pressure);
-+		if (!ts->pen_down)
-+			input_report_key(ts->idev, BTN_TOUCH, 1);
-+		ts->pen_down = 1;
-+	} else {
-+		input_report_abs(ts->idev, ABS_PRESSURE, 0);
-+		if (ts->pen_down)
-+			input_report_key(ts->idev, BTN_TOUCH, 0);
-+		ts->pen_down = 0;
-+	}
-+
-+	input_sync(ts->idev);
-+
-+#ifdef VERBOSE
-+	dev_dbg(&tsc->spi->dev, "x %4d y %4d p %4d\n", x, y, pressure);
-+#endif
-+}
-+
-+static int filter(struct tsc2301_ts *ts, int x, int y, int z1, int z2)
-+{
-+	int inside_rect, pressure_limit, Rt;
-+	struct ts_filter *tsf = &ts->filter;
-+
-+	/* validate pressure and position */
-+	if (x > MAX_12BIT || y > MAX_12BIT)
-+		return 0;
-+
-+	/* skip coords if the pressure-components are out of range */
-+	if (z1 < TSF_MIN_Z1 || z2 > TSF_MAX_Z2)
-+		return 0;
-+
-+	/* Use the x,y,z1,z2 directly on the first "pen down" event */
-+	if (ts->event_sent) {
-+		tsf->avg_x  += x;
-+		tsf->avg_y  += y;
-+		tsf->avg_z1 += z1;
-+		tsf->avg_z2 += z2;
-+
-+		if (++tsf->sample_cnt < TSF_SAMPLES)
-+			return 0;
-+		x = tsf->avg_x / TSF_SAMPLES;
-+		y = tsf->avg_y / TSF_SAMPLES;
-+		z1 = tsf->avg_z1 / TSF_SAMPLES;
-+		z2 = tsf->avg_z2 / TSF_SAMPLES;
-+	}
-+	tsf->sample_cnt = 0;
-+	tsf->avg_x  = 0;
-+	tsf->avg_y  = 0;
-+	tsf->avg_z1 = 0;
-+	tsf->avg_z2 = 0;
-+
-+	pressure_limit = ts->event_sent? ts->max_pressure: ts->touch_pressure;
-+
-+	/* z1 is always at least 100: */
-+	Rt = x * (z2 - z1) / z1;
-+	Rt = Rt * ts->x_plate_ohm / 4096;
-+	if (Rt > pressure_limit)
-+		return 0;
-+
-+	/* discard the event if it still is within the previous rect - unless
-+	 * if the pressure is harder, but then use previous x,y position */
-+	inside_rect = (
-+	    x > (int)ts->x - TS_RECT_SIZE && x < (int)ts->x + TS_RECT_SIZE &&
-+	    y > (int)ts->y - TS_RECT_SIZE && y < (int)ts->y + TS_RECT_SIZE);
-+
-+	if (!ts->event_sent || !inside_rect) {
-+		ts->x = x;
-+		ts->y = y;
-+		ts->p = Rt;
-+		return 1;
-+	} else if (Rt < ts->p) {
-+		ts->p = Rt;
-+		return 1;
-+	}
-+	return 0;
-+}
-+
-+/*
-+ * This procedure is called by the SPI framework after the coordinates
-+ * have been read from TSC2301
-+ */
-+static void tsc2301_ts_rx(void *arg)
-+{
-+	struct tsc2301 *tsc = arg;
-+	struct tsc2301_ts *ts = tsc->ts;
-+	int send_event;
-+	int x, y, z1, z2;
-+
-+	x  = ts->coords->x;
-+	y  = ts->coords->y;
-+	z1 = ts->coords->z1;
-+	z2 = ts->coords->z2;
-+
-+	send_event = filter(ts, x, y, z1, z2);
-+	if (send_event) {
-+		update_pen_state(ts, ts->x, ts->y, ts->p);
-+		ts->event_sent = 1;
-+	}
-+
-+	mod_timer(&ts->penup_timer,
-+		  jiffies + msecs_to_jiffies(TSC2301_TS_PENUP_TIME));
-+}
-+
-+/*
-+ * Timer is called TSC2301_TS_PENUP_TIME after pen is up
-+ */
-+static void tsc2301_ts_timer_handler(unsigned long data)
-+{
-+	struct tsc2301 *tsc = (struct tsc2301 *)data;
-+	struct tsc2301_ts *ts = tsc->ts;
-+
-+	if (ts->event_sent) {
-+		ts->event_sent = 0;
-+		update_pen_state(ts, 0, 0, 0);
-+	}
-+}
-+
-+/*
-+ * This interrupt is called when pen is down and coordinates are
-+ * available. That is indicated by a falling edge on DEV line.
-+ */
-+static irqreturn_t tsc2301_ts_irq_handler(int irq, void *dev_id)
-+{
-+	struct tsc2301 *tsc = dev_id;
-+	struct tsc2301_ts *ts = tsc->ts;
-+	int r;
-+
-+	r = spi_async(tsc->spi, &ts->read_msg);
-+	if (r)
-+		dev_err(&tsc->spi->dev, "ts: spi_async() failed");
-+
-+	mod_timer(&ts->penup_timer,
-+		  jiffies + msecs_to_jiffies(TSC2301_TS_PENUP_TIME));
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static void tsc2301_ts_disable(struct tsc2301 *tsc)
-+{
-+	struct tsc2301_ts *ts = tsc->ts;
-+
-+	if (ts->disable_depth++ != 0)
-+		return;
-+
-+	disable_irq(ts->irq);
-+
-+	/* wait until penup timer expire normally */
-+	do {
-+		msleep(1);
-+	} while (ts->event_sent);
-+
-+	tsc2301_ts_stop_scan(tsc);
-+}
-+
-+static void tsc2301_ts_enable(struct tsc2301 *tsc)
-+{
-+	struct tsc2301_ts *ts = tsc->ts;
-+
-+	if (--ts->disable_depth != 0)
-+		return;
-+
-+	enable_irq(ts->irq);
-+
-+	tsc2301_ts_start_scan(tsc);
-+}
-+
-+#ifdef CONFIG_PM
-+int tsc2301_ts_suspend(struct tsc2301 *tsc)
-+{
-+	struct tsc2301_ts *ts = tsc->ts;
-+
-+	mutex_lock(&ts->mutex);
-+	tsc2301_ts_disable(tsc);
-+	mutex_unlock(&ts->mutex);
-+
-+	return 0;
-+}
-+
-+void tsc2301_ts_resume(struct tsc2301 *tsc)
-+{
-+	struct tsc2301_ts *ts = tsc->ts;
-+
-+	mutex_lock(&ts->mutex);
-+	tsc2301_ts_enable(tsc);
-+	mutex_unlock(&ts->mutex);
-+}
-+#endif
-+
-+static void tsc2301_ts_setup_spi_xfer(struct tsc2301 *tsc)
-+{
-+	struct tsc2301_ts *ts = tsc->ts;
-+	struct spi_message *m = &ts->read_msg;
-+	struct spi_transfer *x = &ts->read_xfer[0];
-+
-+	spi_message_init(m);
-+
-+	x->tx_buf = &tsc2301_ts_read_data;
-+	x->len = 2;
-+	spi_message_add_tail(x, m);
-+
-+	x++;
-+	x->rx_buf = ts->coords;
-+	x->len = 8;
-+	spi_message_add_tail(x, m);
-+
-+	m->complete = tsc2301_ts_rx;
-+	m->context = tsc;
-+}
-+
-+static ssize_t tsc2301_ts_pen_down_show(struct device *dev,
-+					struct device_attribute *attr,
-+					char *buf)
-+{
-+	struct tsc2301 *tsc = dev_get_drvdata(dev);
-+
-+	return sprintf(buf, "%u\n", tsc->ts->pen_down);
-+}
-+
-+static DEVICE_ATTR(pen_down, S_IRUGO, tsc2301_ts_pen_down_show, NULL);
-+
-+static ssize_t tsc2301_ts_disable_show(struct device *dev,
-+				       struct device_attribute *attr, char *buf)
-+{
-+	struct tsc2301		*tsc = dev_get_drvdata(dev);
-+	struct tsc2301_ts	*ts = tsc->ts;
-+
-+	return sprintf(buf, "%u\n", ts->disabled);
-+}
-+
-+static ssize_t tsc2301_ts_disable_store(struct device *dev,
-+					struct device_attribute *attr,
-+					const char *buf, size_t count)
-+{
-+	struct tsc2301		*tsc = dev_get_drvdata(dev);
-+	struct tsc2301_ts	*ts = tsc->ts;
-+	char *endp;
-+	int i;
-+
-+	i = simple_strtoul(buf, &endp, 10);
-+	i = i ? 1 : 0;
-+	mutex_lock(&ts->mutex);
-+	if (i == ts->disabled) goto out;
-+	ts->disabled = i;
-+
-+	if (i)
-+		tsc2301_ts_disable(tsc);
-+	else
-+		tsc2301_ts_enable(tsc);
-+out:
-+	mutex_unlock(&ts->mutex);
-+	return count;
-+}
-+
-+static DEVICE_ATTR(disable_ts, 0664, tsc2301_ts_disable_show,
-+		   tsc2301_ts_disable_store);
-+
-+int __devinit tsc2301_ts_init(struct tsc2301 *tsc,
-+			      struct tsc2301_platform_data *pdata)
-+{
-+	struct tsc2301_ts *ts;
-+	struct input_dev *idev;
-+	int r;
-+	int x_max, y_max;
-+	int x_fudge, y_fudge, p_fudge;
-+
-+	if (pdata->dav_int <= 0) {
-+		dev_err(&tsc->spi->dev, "need DAV IRQ");
-+		return -EINVAL;
-+	}
-+
-+	ts = kzalloc(sizeof(*ts), GFP_KERNEL);
-+	if (ts == NULL)
-+		return -ENOMEM;
-+	tsc->ts = ts;
-+
-+	ts->coords = kzalloc(sizeof(*ts->coords), GFP_KERNEL);
-+	if (ts->coords == NULL) {
-+		kfree(ts);
-+		return -ENOMEM;
-+	}
-+
-+	ts->irq = pdata->dav_int;
-+
-+	init_timer(&ts->penup_timer);
-+	setup_timer(&ts->penup_timer, tsc2301_ts_timer_handler,
-+			(unsigned long)tsc);
-+
-+	mutex_init(&ts->mutex);
-+
-+	ts->x_plate_ohm	= pdata->ts_x_plate_ohm ? : 280;
-+	ts->hw_avg_max	= pdata->ts_hw_avg;
-+	ts->max_pressure = pdata->ts_max_pressure ? : MAX_12BIT;
-+	ts->touch_pressure = pdata->ts_touch_pressure ? : ts->max_pressure;
-+	ts->stab_time	= pdata->ts_stab_time;
-+
-+	x_max		= pdata->ts_x_max ? : 4096;
-+	y_max		= pdata->ts_y_max ? : 4096;
-+	x_fudge		= pdata->ts_x_fudge ? : 4;
-+	y_fudge		= pdata->ts_y_fudge ? : 8;
-+	p_fudge		= pdata->ts_pressure_fudge ? : 2;
-+
-+	if ((r = tsc2301_ts_check_config(ts, &ts->hw_flags))) {
-+		dev_err(&tsc->spi->dev, "invalid configuration\n");
-+		goto err2;
-+	}
-+
-+	idev = input_allocate_device();
-+	if (idev == NULL) {
-+		r = -ENOMEM;
-+		goto err2;
-+	}
-+	idev->name = "TSC2301 touchscreen";
-+	snprintf(ts->phys, sizeof(ts->phys),
-+		 "%s/input-ts", dev_name(&tsc->spi->dev));
-+	idev->phys = ts->phys;
-+	idev->dev.parent = &tsc->spi->dev;
-+
-+	idev->evbit[0] = BIT(EV_ABS) | BIT(EV_KEY);
-+	idev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
-+	ts->idev = idev;
-+
-+	tsc2301_ts_setup_spi_xfer(tsc);
-+
-+	/* These parameters should perhaps be configurable? */
-+	input_set_abs_params(idev, ABS_X, 0, x_max, x_fudge, 0);
-+	input_set_abs_params(idev, ABS_Y, 0, y_max, y_fudge, 0);
-+	input_set_abs_params(idev, ABS_PRESSURE, 0, ts->max_pressure,
-+			     p_fudge, 0);
-+
-+	tsc2301_ts_start_scan(tsc);
-+
-+	r = request_irq(ts->irq, tsc2301_ts_irq_handler,
-+			IRQF_TRIGGER_FALLING,
-+			"tsc2301-ts", tsc);
-+	if (r < 0) {
-+		dev_err(&tsc->spi->dev, "unable to get DAV IRQ");
-+		goto err3;
-+	}
-+	irq_set_irq_wake(ts->irq, 1);
-+
-+	if (device_create_file(&tsc->spi->dev, &dev_attr_pen_down) < 0)
-+		goto err4;
-+	if (device_create_file(&tsc->spi->dev, &dev_attr_disable_ts) < 0)
-+		goto err5;
-+
-+	r = input_register_device(idev);
-+	if (r < 0) {
-+		dev_err(&tsc->spi->dev, "can't register touchscreen device\n");
-+		goto err6;
-+	}
-+
-+	return 0;
-+err6:
-+	device_remove_file(&tsc->spi->dev, &dev_attr_disable_ts);
-+err5:
-+	device_remove_file(&tsc->spi->dev, &dev_attr_pen_down);
-+err4:
-+	free_irq(ts->irq, tsc);
-+err3:
-+	tsc2301_ts_stop_scan(tsc);
-+	input_free_device(idev);
-+err2:
-+	kfree(ts->coords);
-+	kfree(ts);
-+	return r;
-+}
-+
-+void __devexit tsc2301_ts_exit(struct tsc2301 *tsc)
-+{
-+	struct tsc2301_ts *ts = tsc->ts;
-+
-+	tsc2301_ts_disable(tsc);
-+
-+	device_remove_file(&tsc->spi->dev, &dev_attr_disable_ts);
-+	device_remove_file(&tsc->spi->dev, &dev_attr_pen_down);
-+
-+	free_irq(ts->irq, tsc);
-+	input_unregister_device(ts->idev);
-+
-+	kfree(ts->coords);
-+	kfree(ts);
-+}
-+MODULE_AUTHOR("Jarkko Oikarinen <jarkko.oikarinen@nokia.com>");
-+MODULE_LICENSE("GPL");
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -433,6 +433,28 @@ config SPI_TLE62X0
- 	  sysfs interface, with each line presented as a kind of GPIO
- 	  exposing both switch control and diagnostic feedback.
- 
-+config SPI_TSC2301
-+	tristate "TSC2301 driver"
-+	depends on SPI_MASTER
-+	help
-+	  Say Y here if you have a TSC2301 chip connected to an SPI
-+	  bus on your board.
-+
-+	  The TSC2301 is a highly integrated PDA analog interface circuit.
-+	  It contains a complete 12-bit A/D resistive touch screen
-+	  converter (ADC) including drivers, touch pressure measurement
-+	  capability, keypad controller, and 8-bit D/A converter (DAC) output
-+	  for LCD contrast control.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called tsc2301.
-+
-+config SPI_TSC2301_AUDIO
-+	boolean "TSC2301 audio support"
-+	depends on SPI_TSC2301 && SND
-+	help
-+	  Say Y here for if you are using the audio features of TSC2301.
-+
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -59,4 +59,6 @@ obj-$(CONFIG_SPI_TLE62X0)		+= spi-tle62x
- obj-$(CONFIG_SPI_TOPCLIFF_PCH)		+= spi-topcliff-pch.o
- obj-$(CONFIG_SPI_TXX9)			+= spi-txx9.o
- obj-$(CONFIG_SPI_XILINX)		+= spi-xilinx.o
--
-+obj-$(CONFIG_SPI_TSC2301)		+= tsc2301.o
-+tsc2301-objs				:= tsc2301-core.o
-+tsc2301-$(CONFIG_SPI_TSC2301_AUDIO)	+= tsc2301-mixer.o
---- /dev/null
-+++ b/drivers/spi/tsc2301-core.c
-@@ -0,0 +1,297 @@
-+/*
-+ * TSC2301 driver
-+ *
-+ * Copyright (C) 2005, 2006 Nokia Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/delay.h>
-+#include <linux/gpio.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/tsc2301.h>
-+
-+u16 tsc2301_read_reg(struct tsc2301 *tsc, int reg)
-+{
-+	struct spi_transfer t[2];
-+	struct spi_message m;
-+	u16 data = 0, cmd;
-+
-+	cmd = reg;
-+	cmd |= 0x8000;
-+
-+	memset(t, 0, sizeof(t));
-+	spi_message_init(&m);
-+	m.spi = tsc->spi;
-+
-+	t[0].tx_buf = &cmd;
-+	t[0].rx_buf = NULL;
-+	t[0].len = 2;
-+	spi_message_add_tail(&t[0], &m);
-+
-+	t[1].tx_buf = NULL;
-+	t[1].rx_buf = &data;
-+	t[1].len = 2;
-+	spi_message_add_tail(&t[1], &m);
-+
-+	spi_sync(m.spi, &m);
-+
-+	return data;
-+}
-+
-+void tsc2301_write_reg(struct tsc2301 *tsc, int reg, u16 val)
-+{
-+	struct spi_transfer t;
-+	struct spi_message m;
-+	u16 data[2];
-+
-+	/* Now we prepare the command for transferring */
-+	data[0] = reg;
-+	data[1] = val;
-+
-+	spi_message_init(&m);
-+	m.spi = tsc->spi;
-+
-+	memset(&t, 0, sizeof(t));
-+	t.tx_buf = data;
-+	t.rx_buf = NULL;
-+	t.len = 4;
-+	spi_message_add_tail(&t, &m);
-+
-+	spi_sync(m.spi, &m);
-+}
-+
-+void tsc2301_write_kbc(struct tsc2301 *tsc, int val)
-+{
-+	u16 w;
-+
-+	w = tsc->config2_shadow;
-+	w &= ~(0x03 << 14);
-+	w |= (val & 0x03) << 14;
-+	tsc2301_write_reg(tsc, TSC2301_REG_CONFIG2, w);
-+	tsc->config2_shadow = w;
-+}
-+
-+void tsc2301_write_pll(struct tsc2301 *tsc,
-+		       int pll_n, int pll_a, int pll_pdc, int pct_e, int pll_o)
-+{
-+	u16 w;
-+
-+	w = tsc->config2_shadow;
-+	w &= ~0x3fff;
-+	w |= (pll_n & 0x0f) | ((pll_a & 0x0f) << 4) | ((pll_pdc & 0x0f) << 8);
-+	w |= pct_e ? (1 << 12) : 0;
-+	w |= pll_o ? (1 << 13) : 0;
-+	tsc2301_write_reg(tsc, TSC2301_REG_CONFIG2, w);
-+	tsc->config2_shadow = w;
-+}
-+
-+void tsc2301_read_buf(struct tsc2301 *tsc, int reg, u16 *rx_buf, int len)
-+{
-+	struct spi_transfer t[2];
-+	struct spi_message m;
-+	u16 cmd, i;
-+
-+	cmd = reg;
-+	cmd |= 0x8000;
-+
-+	spi_message_init(&m);
-+	m.spi = tsc->spi;
-+
-+	memset(t, 0, sizeof(t));
-+	t[0].tx_buf = &cmd;
-+	t[0].rx_buf = NULL;
-+	t[0].len = 2;
-+	spi_message_add_tail(&t[0], &m);
-+
-+	t[1].tx_buf = NULL;
-+	t[1].rx_buf = rx_buf;
-+	t[1].len = 2 * len;
-+	spi_message_add_tail(&t[1], &m);
-+
-+	spi_sync(m.spi, &m);
-+
-+	for (i = 0; i < len; i++)
-+		printk(KERN_DEBUG "rx_buf[%d]: %04x\n", i, rx_buf[i]);
-+}
-+
-+static int __devinit tsc2301_probe(struct spi_device *spi)
-+{
-+	struct tsc2301			*tsc;
-+	struct tsc2301_platform_data	*pdata = spi->dev.platform_data;
-+	int r;
-+	u16 w;
-+
-+	if (!pdata) {
-+		dev_dbg(&spi->dev, "no platform data?\n");
-+		return -ENODEV;
-+	}
-+
-+	tsc = kzalloc(sizeof(*tsc), GFP_KERNEL);
-+	if (tsc == NULL)
-+		return -ENOMEM;
-+
-+	dev_set_drvdata(&spi->dev, tsc);
-+	tsc->spi = spi;
-+
-+	tsc->enable_clock = pdata->enable_clock;
-+	tsc->disable_clock = pdata->disable_clock;
-+
-+	if (pdata->reset_gpio >= 0) {
-+		tsc->reset_gpio = pdata->reset_gpio;
-+		r = gpio_request(tsc->reset_gpio, "TSC2301 reset");
-+		if (r < 0)
-+			goto err1;
-+		gpio_direction_output(tsc->reset_gpio, 1);
-+		mdelay(1);
-+		gpio_set_value(tsc->reset_gpio, 0);
-+	} else
-+		tsc->reset_gpio = -1;
-+
-+	spi->mode = SPI_MODE_1;
-+	spi->bits_per_word = 16;
-+	/* The max speed might've been defined by the board-specific
-+	 * struct */
-+	if (!spi->max_speed_hz)
-+		spi->max_speed_hz = TSC2301_HZ;
-+	spi_setup(spi);
-+
-+	/* Soft reset */
-+	tsc2301_write_reg(tsc, TSC2301_REG_RESET, 0xbb00);
-+	msleep(1);
-+
-+	w = tsc2301_read_reg(tsc, TSC2301_REG_ADC);
-+	if (!(w & (1 << 14))) {
-+		dev_err(&spi->dev, "invalid ADC reg value: %04x\n", w);
-+		r = -ENODEV;
-+		goto err1;
-+	}
-+
-+	w = tsc2301_read_reg(tsc, TSC2301_REG_DAC);
-+	if (!(w & (1 << 15))) {
-+		dev_err(&spi->dev, "invalid DAC reg value: %04x\n", w);
-+		r = -ENODEV;
-+		goto err1;
-+	}
-+
-+	/* Stop keypad scanning */
-+	tsc2301_write_reg(tsc, TSC2301_REG_KEY, 0x4000);
-+
-+	/* We have to cache this for read-modify-write, since we can't
-+	 * read back BIT15 */
-+	w = tsc2301_read_reg(tsc, TSC2301_REG_CONFIG2);
-+	/* By default BIT15 is set */
-+	w |= 1 << 15;
-+	tsc->config2_shadow = w;
-+
-+	r = tsc2301_kp_init(tsc, pdata);
-+	if (r)
-+		goto err1;
-+	r = tsc2301_ts_init(tsc, pdata);
-+	if (r)
-+		goto err2;
-+	r = tsc2301_mixer_init(tsc, pdata);
-+	if (r)
-+		goto err3;
-+	return 0;
-+
-+err3:
-+	tsc2301_ts_exit(tsc);
-+err2:
-+	tsc2301_kp_exit(tsc);
-+err1:
-+	kfree(tsc);
-+	return r;
-+}
-+
-+static int __devexit tsc2301_remove(struct spi_device *spi)
-+{
-+	struct tsc2301 *tsc = dev_get_drvdata(&spi->dev);
-+
-+	tsc2301_mixer_exit(tsc);
-+	tsc2301_ts_exit(tsc);
-+	tsc2301_kp_exit(tsc);
-+	if (tsc->reset_gpio >= 0)
-+		gpio_free(tsc->reset_gpio);
-+	kfree(tsc);
-+
-+	return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int tsc2301_suspend(struct spi_device *spi, pm_message_t mesg)
-+{
-+	struct tsc2301 *tsc = dev_get_drvdata(&spi->dev);
-+	int r;
-+
-+	if ((r = tsc2301_mixer_suspend(tsc)) < 0)
-+		return r;
-+	if ((r = tsc2301_kp_suspend(tsc)) < 0)
-+		goto err1;
-+	if ((r = tsc2301_ts_suspend(tsc)) < 0)
-+		goto err2;
-+
-+	return 0;
-+err2:
-+	tsc2301_kp_resume(tsc);
-+err1:
-+	tsc2301_mixer_resume(tsc);
-+	return r;
-+}
-+
-+static int tsc2301_resume(struct spi_device *spi)
-+{
-+	struct tsc2301 *tsc = dev_get_drvdata(&spi->dev);
-+
-+	tsc2301_ts_resume(tsc);
-+	tsc2301_kp_resume(tsc);
-+	tsc2301_mixer_resume(tsc);
-+	return 0;
-+}
-+#endif
-+
-+static struct spi_driver tsc2301_driver = {
-+	.driver = {
-+		   .name = "tsc2301",
-+		   .bus = &spi_bus_type,
-+		   .owner = THIS_MODULE,
-+	},
-+#ifdef CONFIG_PM
-+	.suspend = tsc2301_suspend,
-+	.resume = tsc2301_resume,
-+#endif
-+	.probe = tsc2301_probe,
-+	.remove = __devexit_p(tsc2301_remove),
-+};
-+
-+static int __init tsc2301_init(void)
-+{
-+	printk("TSC2301 driver initializing\n");
-+
-+	return spi_register_driver(&tsc2301_driver);
-+}
-+module_init(tsc2301_init);
-+
-+static void __exit tsc2301_exit(void)
-+{
-+	spi_unregister_driver(&tsc2301_driver);
-+}
-+module_exit(tsc2301_exit);
-+
-+MODULE_AUTHOR("Juha Yrjölä <juha.yrjola@nokia.com>");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/spi/tsc2301-mixer.c
-@@ -0,0 +1,1003 @@
-+/*
-+ * ALSA Mixer implementation for TSC2301
-+ *
-+ * Copyright (C) 2006 Nokia Corporation.
-+ *
-+ * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
-+ *          Juha Yrjola
-+ *
-+ * Some notes about TSC2301:
-+ * - PLL will stop when DAC and ADC's are powered down.
-+ * - Touchscreen will stop working when audio part is powered up and if audio
-+ *   MCLK is stopped. Problem is avoided if audio is powered down before
-+ *   stopping MCLK.
-+ * - Audio DAC or audio outputs will activate only after 100 msec from the
-+ *   chip power-up. Reason seems to be VCM since there is no this delay if the
-+ *   chip and VCM (bit AVPD on PD/MISC) were not powered down. The chip will
-+ *   consume about 1 mA if all other audio blocks are powered down except the
-+ *   chip itself and VCM. Full power down consumes only about few uA.
-+ * - Power-down transition could happen earliest about 100 msec after the chip
-+ *   power-up. Otherwise power-down will fail if there is no that 100 msec
-+ *   on time before it. It's not obvious why is that since chip reports
-+ *   power-up to be completed and also PLL output on GPIO_0 is active in few
-+ *   milliseconds.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-+ * 02110-1301 USA
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/errno.h>
-+#include <linux/delay.h>
-+#include <linux/slab.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/tsc2301.h>
-+
-+#include <sound/core.h>
-+#include <sound/control.h>
-+
-+/* shadow register indexes */
-+enum {
-+	/* audio control and volume registers */
-+	AUDCNTL_INDEX,
-+	ADCVOL_INDEX,
-+	DACVOL_INDEX,
-+	BPVOL_INDEX,
-+	/* keyclick control register (not needed here) */
-+	/* audio power control register */
-+	PD_MISC_INDEX,
-+	/* TSC2301 GPIO control register */
-+	GPIO_INDEX,
-+
-+	SHADOW_REG_COUNT,
-+};
-+
-+/* structure for driver private data */
-+struct tsc2301_mixer {
-+	struct tsc2301 *tsc;
-+	struct mutex mutex;
-+
-+	/* shadow registers holding TSC2301 audio registers. Used to hold
-+	 * their states during the sleep and also to reduce communication with
-+	 * the chip since get callback functions could get register values
-+	 * directly from these shadow registers without needing to read them
-+	 * from the chip */
-+	u16 shadow_regs[SHADOW_REG_COUNT];
-+
-+	/* audio controller driver usage of the ADC and DAC */
-+	unsigned adc_enabled:1, dac_enabled:1;
-+	unsigned pll_output:1;
-+	unsigned mclk_enabled;
-+
-+	/* latest audio power-up timestamp */
-+	unsigned long pu_jiffies;
-+
-+	/* these are used when upper layer(s) are going to power-down TSC2301
-+	 * before 100 msec is passed from power-up */
-+	struct delayed_work delayed_power_down;
-+	unsigned delayed_pd_active:1;
-+
-+	int (* platform_init)(struct device *);
-+	void (* platform_cleanup)(struct device *);
-+
-+	struct tsc2301_mixer_gpio *mixer_gpios;
-+	int n_mixer_gpios;
-+};
-+
-+#define TSC2301_DAC_DELAY		msecs_to_jiffies(100)
-+#define TSC2301_MIN_PU_PERIOD		msecs_to_jiffies(100)
-+
-+#define TSC2301_REG_TO_PVAL(reg)	\
-+	(TSC2301_REG_TO_PAGE(reg) << 6 | TSC2301_REG_TO_ADDR(reg))
-+#define  TSC2301_PVAL_TO_REG(v)		\
-+	(TSC2301_REG((((v) >> 6) & 3),((v) & 0x1f)))
-+
-+#define TSC2301_VOLUME_MASK		0x7f
-+#define TSC2301_MIN_ADCVOL		6
-+#define TSC2301_MIN_DACVOL		0
-+#define TSC2301_MIN_BPVOL		31
-+#define TSC2301_MUTE_LEFT_SHIFT		15
-+#define TSC2301_VOL_LEFT_SHIFT		8
-+#define TSC2301_MUTE_RIGHT_SHIFT	7
-+#define TSC2301_VOL_RIGHT_SHIFT		0
-+
-+#define TSC2301_INM_MASK		3
-+#define TSC2301_INML_SHIFT		12
-+#define TSC2301_INMR_SHIFT		10
-+
-+#define TSC2301_MICG_MASK		3
-+#define TSC2301_MICG_MIN		1 /* values 0 & 1 both mean 0 dB */
-+#define TSC2301_MICG_SHIFT		8
-+
-+#define TSC2301_REG_AUDCNTL_MCLK(v)	(((v) & 3) << 6)
-+#define TSC2301_REG_AUDCNTL_I2SFS(v)	(((v) & 0xf) << 2)
-+#define TSC2301_REG_AUDCNTL_I2SFM(v)	(((v) & 3) << 0)
-+
-+#define TSC2301_SINGLE(xname, xindex, reg, shadow_index, shift, mask, min) \
-+{\
-+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
-+	.name = xname, \
-+	.index = xindex, \
-+	.info = snd_tsc2301_info_single, \
-+	.get = snd_tsc2301_get_single, \
-+	.put = snd_tsc2301_put_single, \
-+	.private_value = TSC2301_REG_TO_PVAL(reg) | \
-+		(shadow_index << 8) | (shift << 16) | (mask << 24) | \
-+		(min << 28) \
-+}
-+#define TSC2301_SINGLE_MINVAL(v)	(((v) >> 28) & 15)
-+#define TSC2301_SINGLE_SHIFT(v)		(((v) >> 16) & 15)
-+#define TSC2301_SINGLE_MASK(v)		(((v) >> 24) & 15)
-+
-+#define TSC2301_DOUBLE(xname, xindex, reg, shadow_index, ls, rs, mask, min) \
-+{\
-+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
-+	.name = xname, \
-+	.index = xindex, \
-+	.info = snd_tsc2301_info_double, \
-+	.get = snd_tsc2301_get_double, \
-+	.put = snd_tsc2301_put_double, \
-+	.private_value = TSC2301_REG_TO_PVAL(reg) | \
-+		(shadow_index << 8) | (min << 11) | \
-+		(ls << 16) | (rs << 20) | (mask << 24) \
-+}
-+#define TSC2301_DOUBLE_MINVAL(v)	(((v) >> 11) & 0x1f)
-+#define TSC2301_DOUBLE_LEFT_SHIFT(v)	(((v) >> 16) & 15)
-+#define TSC2301_DOUBLE_RIGHT_SHIFT(v)	(((v) >> 20) & 15)
-+#define TSC2301_DOUBLE_MASK(v)		(((v) >> 24) & TSC2301_VOLUME_MASK)
-+
-+#define TSC2301_MUX(xname, xindex, reg, shadow_index, ls, rs, mask) \
-+{\
-+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
-+	.name = xname, \
-+	.index = xindex, \
-+	.info = snd_tsc2301_info_mux, \
-+	.get = snd_tsc2301_get_mux, \
-+	.put = snd_tsc2301_put_mux, \
-+	.private_value = TSC2301_REG_TO_PVAL(reg) | \
-+		(shadow_index << 8) | (ls << 16) | (rs << 20) | (mask << 24) \
-+}
-+#define TSC2301_MUX_LEFT_SHIFT(v)	(((v) >> 16) & 15)
-+#define TSC2301_MUX_RIGHT_SHIFT(v)	(((v) >> 20) & 15)
-+#define TSC2301_MUX_MASK(v)		(((v) >> 24) & TSC2301_VOLUME_MASK)
-+
-+#define TSC2301_BOOL(xname, xindex, reg, shadow_index, shift, invert, state) \
-+{ \
-+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
-+	.name = xname, \
-+	.index = xindex, \
-+	.info = snd_tsc2301_info_bool, \
-+	.get = snd_tsc2301_get_bool, \
-+	.put = snd_tsc2301_put_bool, \
-+	.private_value = TSC2301_REG_TO_PVAL(reg) | \
-+		(shadow_index << 8) | (shift << 16) | \
-+		(invert << 24) | (state << 25) \
-+}
-+#define TSC2301_BOOL_SHIFT(v)		(((v) >> 16) & 7)
-+#define TSC2301_BOOL_INVERT(v)		(((v) >> 24) & 1)
-+#define TSC2301_BOOL_STATE(v)		(((v) >> 25) & 1)
-+
-+#define TSC2301_SHADOW_INDEX(v)		(((v) >> 8) & 7)
-+
-+/*
-+ * Power-down handler for additional GPIO mixer controls. GPIO state of GPIO
-+ * controls whose power-down flag is enabled are set to their false/deactivate
-+ * state
-+ *
-+ * Must be called tsc->mixer->mutex locked
-+ */
-+static void tsc2301_gpio_power_down(struct tsc2301 *tsc)
-+{
-+	struct tsc2301_mixer *mix = tsc->mixer;
-+	u16 temp;
-+	int i;
-+
-+	temp = mix->shadow_regs[GPIO_INDEX];
-+	for (i = 0; i < mix->n_mixer_gpios; i++) {
-+		const struct tsc2301_mixer_gpio *mg;
-+
-+		mg = mix->mixer_gpios + i;
-+		if (mg->deactivate_on_pd) {
-+			int gpio = mg->gpio;
-+
-+			temp &= ~(1 << gpio);
-+			temp |= mg->inverted << gpio;
-+		}
-+	}
-+	tsc2301_write_reg(tsc, TSC2301_REG_GPIO, temp);
-+}
-+
-+/*
-+ * Powers down/up audio blocks which are muted or become unused.
-+ * shadow_index >= 0, changes power state of single audio block
-+ * shadow_index < 0, changes power state of all blocks
-+ *
-+ * Must be called tsc->mixer->mutex locked
-+ */
-+#define TSC2301_MUTE_MASK \
-+	((1 << TSC2301_MUTE_LEFT_SHIFT) | (1 << TSC2301_MUTE_RIGHT_SHIFT))
-+static void tsc2301_power_ctrl(struct tsc2301 *tsc, int shadow_index,
-+			       int poll_pdsts)
-+{
-+	struct tsc2301_mixer *mix = tsc->mixer;
-+	u16 pd_ctrl, pd_ctrl_old, w;
-+	unsigned long timeout;
-+	int power_up = 0;
-+
-+	if (mix->delayed_pd_active) {
-+		mix->delayed_pd_active = 0;
-+		mix->mclk_enabled--;
-+		cancel_delayed_work(&mix->delayed_power_down);
-+	}
-+
-+	pd_ctrl = pd_ctrl_old = mix->shadow_regs[PD_MISC_INDEX];
-+	/* power control helper based on used space mixer selections. See
-+	 * actual power control decisions below */
-+	if (shadow_index < 0 || shadow_index == ADCVOL_INDEX) {
-+		/* ADC left and right power down control */
-+		if (mix->shadow_regs[ADCVOL_INDEX] &
-+		    (1 << TSC2301_MUTE_LEFT_SHIFT))
-+			/* left ADC muted. Power down the left ADC */
-+			pd_ctrl |= TSC2301_REG_PD_MISC_ADPDL;
-+		else
-+			pd_ctrl &= ~TSC2301_REG_PD_MISC_ADPDL;
-+		if (mix->shadow_regs[ADCVOL_INDEX] &
-+		    (1 << TSC2301_MUTE_LEFT_SHIFT))
-+			/* right ADC muted. Power down the right ADC */
-+			pd_ctrl |= TSC2301_REG_PD_MISC_ADPDR;
-+		else
-+			pd_ctrl &= ~TSC2301_REG_PD_MISC_ADPDR;
-+	}
-+	if (shadow_index < 0 || shadow_index == DACVOL_INDEX) {
-+		/* DAC power down control */
-+		if ((mix->shadow_regs[DACVOL_INDEX] &
-+		     TSC2301_MUTE_MASK) == TSC2301_MUTE_MASK)
-+			/* both DACs muted. Power down the DAC */
-+			pd_ctrl |= TSC2301_REG_PD_MISC_DAPD;
-+		else
-+			pd_ctrl &= ~TSC2301_REG_PD_MISC_DAPD;
-+	}
-+	if (shadow_index < 0 || shadow_index == BPVOL_INDEX) {
-+		/* line bypass power down control */
-+		if ((mix->shadow_regs[BPVOL_INDEX] &
-+		     TSC2301_MUTE_MASK) == TSC2301_MUTE_MASK)
-+			/* both line bypasses muted. Power down the bypass
-+			 * path */
-+			pd_ctrl |= TSC2301_REG_PD_MISC_ABPD;
-+		else
-+			pd_ctrl &= ~TSC2301_REG_PD_MISC_ABPD;
-+	}
-+	if (shadow_index < 0 || shadow_index == AUDCNTL_INDEX) {
-+		/* mic bias power down control */
-+		if ((mix->shadow_regs[AUDCNTL_INDEX] &
-+		     (3 << TSC2301_INML_SHIFT)) &&
-+		    (mix->shadow_regs[AUDCNTL_INDEX] &
-+		     (3 << TSC2301_INMR_SHIFT)))
-+			/* both ADC channels use other than mic input. Power
-+			 * down the mic bias output */
-+			pd_ctrl |= TSC2301_REG_PD_MISC_MIBPD;
-+		else
-+			pd_ctrl &= ~TSC2301_REG_PD_MISC_MIBPD;
-+	}
-+
-+	/* power control decisions based on codec usage and user space mixer
-+	 * selections detected above */
-+	pd_ctrl &= ~TSC2301_REG_PD_MISC_APD; /* audio not powered down */
-+	if (mix->mclk_enabled) {
-+		if (!mix->adc_enabled) {
-+			/* ADC not used, power down both ADC's and mic bias
-+			 * output independently of user space mixer
-+			 * selections */
-+			pd_ctrl |= TSC2301_REG_PD_MISC_ADPDL;
-+			pd_ctrl |= TSC2301_REG_PD_MISC_ADPDR;
-+			pd_ctrl |= TSC2301_REG_PD_MISC_MIBPD;
-+		}
-+		if (!mix->dac_enabled) {
-+			/* DAC not used, power down DAC independently of user
-+			 * space mixer selections */
-+			pd_ctrl |= TSC2301_REG_PD_MISC_DAPD;
-+		}
-+
-+		if (mix->pll_output) {
-+			/* GPIO_0 is configured as PLL output so audio
-+			 * controller is expecting clock from TSC2301. Either
-+			 * ADC or DAC must be active in order to keep PLL on */
-+			if ((pd_ctrl & TSC2301_REG_PD_MISC_ADPDL) &&
-+			    (pd_ctrl & TSC2301_REG_PD_MISC_ADPDR) &&
-+			    (pd_ctrl & TSC2301_REG_PD_MISC_DAPD)) {
-+				/* neither ADC or DAC used. Force ADC on in
-+				 * order to keep PLL active */
-+				pd_ctrl &= ~(TSC2301_REG_PD_MISC_ADPDL |
-+					     TSC2301_REG_PD_MISC_ADPDR);
-+			}
-+		}
-+	} else {
-+		/* audio input clock is not enabled so power down DAC and ADC
-+		 * in order to shutdown PLL and to keep touchscreen and keypad
-+		 * parts working. Touchscreen and keypad use audio clock when
-+		 * PLL is on and internal clock otherwise */
-+		pd_ctrl |= TSC2301_REG_PD_MISC_DAPD |
-+			   TSC2301_REG_PD_MISC_ADPDL |
-+			   TSC2301_REG_PD_MISC_ADPDR;
-+	}
-+
-+	if ((pd_ctrl & TSC2301_REG_PD_MISC_ADPDL) &&
-+	    (pd_ctrl & TSC2301_REG_PD_MISC_ADPDR) &&
-+	    (pd_ctrl & TSC2301_REG_PD_MISC_DAPD) &&
-+	    (pd_ctrl & TSC2301_REG_PD_MISC_ABPD)) {
-+		/* all ADC, DAC and line bypass path unused. Power down the
-+		 * whole audio part of the TSC2301 */
-+		pd_ctrl |= TSC2301_REG_PD_MISC_APD;
-+	}
-+
-+	if (pd_ctrl == pd_ctrl_old)
-+		return;
-+
-+	/* power down control changed. Update into TSC2301 */
-+	if ((pd_ctrl ^ pd_ctrl_old) & TSC2301_REG_PD_MISC_APD) {
-+		/* whole audio power state changed. Update GPIO states */
-+		if (pd_ctrl & TSC2301_REG_PD_MISC_APD) {
-+			/* power down GPIO controls before powering down
-+			 * the codec */
-+			tsc2301_gpio_power_down(tsc);
-+			/* we must really ensure that codec has been on no less
-+			 * than 100 msec before doing power-down */
-+			timeout = mix->pu_jiffies + TSC2301_MIN_PU_PERIOD -
-+				  jiffies;
-+			if (timeout <= TSC2301_MIN_PU_PERIOD) {
-+				mix->delayed_pd_active = 1;
-+				mix->mclk_enabled++;
-+				schedule_delayed_work(&mix->delayed_power_down,
-+						      timeout + 1);
-+				return;
-+			}
-+		} else
-+			/* restore GPIOs after codec is powered up */
-+			power_up = 1;
-+	}
-+	mix->shadow_regs[PD_MISC_INDEX] = pd_ctrl;
-+	tsc2301_write_reg(tsc, TSC2301_REG_PD_MISC, pd_ctrl);
-+	if (power_up)
-+		mix->pu_jiffies = jiffies;
-+	if (!poll_pdsts) {
-+		if (power_up)
-+			tsc2301_write_reg(tsc, TSC2301_REG_GPIO,
-+					  mix->shadow_regs[GPIO_INDEX]);
-+		return;
-+	}
-+
-+	/* wait until power-up/-down is completed */
-+	timeout = jiffies + msecs_to_jiffies(100);
-+	w = 0;
-+	do {
-+		if (time_after(jiffies, timeout)) {
-+			/* Print a warning only if the I2S clock is not
-+			 * present / out of sync. This can happen during
-+			 * init time, when that clock will be turned on
-+			 * by another driver like in the OMAP EAC with
-+			 * external clock case.
-+			 */
-+			if (w & TSC2301_REG_PD_MISC_OTSYN) {
-+				dev_warn(&tsc->spi->dev,
-+				   "I2S clock not in sync or off.\n");
-+			} else {
-+				dev_err(&tsc->spi->dev,
-+				   "power-up/-down timed out "
-+				   "(0x%04x, 0x%04x -> 0x%04x)\n",
-+				   w, pd_ctrl_old, pd_ctrl);
-+			}
-+			goto out;
-+		}
-+		w = tsc2301_read_reg(tsc, TSC2301_REG_PD_MISC);
-+	} while (!(w & TSC2301_REG_PD_MISC_PDSTS));
-+
-+out:
-+	if (((pd_ctrl ^ pd_ctrl_old) & TSC2301_REG_PD_MISC_DAPD) &&
-+	    !(pd_ctrl & TSC2301_REG_PD_MISC_DAPD)) {
-+		/* DAC powered up now. Ensure that DAC and audio outputs are
-+		 * activated. They are up 100 msec after the chip power-up
-+		 * command */
-+		timeout = mix->pu_jiffies + TSC2301_DAC_DELAY - jiffies;
-+		if (timeout <= TSC2301_DAC_DELAY)
-+			schedule_timeout_interruptible(timeout);
-+		/* FIXME: This is lazy. We restore GPIOs only after activating
-+		 * the DAC. It would be better to do some kind of delayed GPIO
-+		 * restore. That ensures that we restore them also if only ADC
-+		 * path is activated. But this is required only if there is
-+		 * some input amplifier, bias control, etc. and their power
-+		 * state is under TSC GPIO control */
-+		tsc2301_write_reg(tsc, TSC2301_REG_GPIO,
-+				  mix->shadow_regs[GPIO_INDEX]);
-+	}
-+}
-+
-+static int snd_tsc2301_info_single(struct snd_kcontrol *kcontrol,
-+				   struct snd_ctl_elem_info *uinfo)
-+{
-+	int mask = TSC2301_SINGLE_MASK(kcontrol->private_value);
-+	int minval = TSC2301_SINGLE_MINVAL(kcontrol->private_value);
-+
-+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+	uinfo->count = 1;
-+	uinfo->value.integer.min = minval;
-+	uinfo->value.integer.max = mask;
-+
-+	return 0;
-+}
-+
-+static int snd_tsc2301_get_single(struct snd_kcontrol *kcontrol,
-+				  struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct tsc2301 *tsc = kcontrol->private_data;
-+	unsigned long priv = kcontrol->private_value;
-+	int mask = TSC2301_SINGLE_MASK(priv);
-+	int shift = TSC2301_SINGLE_SHIFT(priv);
-+	int shadow_index = TSC2301_SHADOW_INDEX(priv);
-+	u16 shadow_reg;
-+
-+	shadow_reg = tsc->mixer->shadow_regs[shadow_index];
-+
-+	ucontrol->value.integer.value[0] = (shadow_reg >> shift) & mask;
-+
-+	return 0;
-+}
-+
-+static int snd_tsc2301_put_single(struct snd_kcontrol *kcontrol,
-+				  struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct tsc2301 *tsc = kcontrol->private_data;
-+	unsigned long priv = kcontrol->private_value;
-+	int mask = TSC2301_SINGLE_MASK(priv);
-+	int shadow_index = TSC2301_SHADOW_INDEX(priv);
-+	u16 shadow_reg, shadow_reg_old;
-+	int shift = TSC2301_SINGLE_SHIFT(priv);
-+	int reg = TSC2301_PVAL_TO_REG(priv);
-+	int changed;
-+
-+	mutex_lock(&tsc->mixer->mutex);
-+	shadow_reg = shadow_reg_old = tsc->mixer->shadow_regs[shadow_index];
-+
-+	/* zero bits to be modified */
-+	shadow_reg &= ~(mask << shift);
-+	/* modify with new value */
-+	shadow_reg |= ((ucontrol->value.integer.value[0] & mask) << shift);
-+
-+	changed = (shadow_reg != shadow_reg_old);
-+	tsc->mixer->shadow_regs[shadow_index] = shadow_reg;
-+
-+	/* update into TSC2301 if necessary */
-+	if (changed)
-+		tsc2301_write_reg(tsc, reg, shadow_reg);
-+	mutex_unlock(&tsc->mixer->mutex);
-+
-+	return changed;
-+}
-+
-+static int snd_tsc2301_info_double(struct snd_kcontrol *kcontrol,
-+				   struct snd_ctl_elem_info *uinfo)
-+{
-+	/* mask == 1 : Switch
-+	 * mask > 1 : Max volume */
-+	int mask = TSC2301_DOUBLE_MASK(kcontrol->private_value);
-+	int minval = TSC2301_DOUBLE_MINVAL(kcontrol->private_value);
-+
-+	uinfo->type = mask == 1 ? SNDRV_CTL_ELEM_TYPE_BOOLEAN :
-+		SNDRV_CTL_ELEM_TYPE_INTEGER;
-+	uinfo->count = 2;
-+	uinfo->value.integer.min = minval;
-+	uinfo->value.integer.max = mask;
-+
-+	return 0;
-+}
-+
-+static int snd_tsc2301_get_double(struct snd_kcontrol *kcontrol,
-+				  struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct tsc2301 *tsc = kcontrol->private_data;
-+	unsigned long priv = kcontrol->private_value;
-+	/* mask == 1 : Switch
-+	 * mask > 1 : Volume */
-+	int mask = TSC2301_DOUBLE_MASK(priv);
-+	int ls = TSC2301_DOUBLE_LEFT_SHIFT(priv);
-+	int rs = TSC2301_DOUBLE_RIGHT_SHIFT(priv);
-+	int shadow_index = TSC2301_SHADOW_INDEX(priv);
-+	u16 shadow_reg;
-+
-+	shadow_reg = tsc->mixer->shadow_regs[shadow_index];
-+
-+	/* invert mute bits for the switches */
-+	if (mask == 1)
-+		shadow_reg = ~shadow_reg;
-+
-+	ucontrol->value.integer.value[0] = (shadow_reg >> ls) & mask;
-+	ucontrol->value.integer.value[1] = (shadow_reg >> rs) & mask;
-+
-+	return 0;
-+}
-+
-+static int snd_tsc2301_put_double(struct snd_kcontrol *kcontrol,
-+				  struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct tsc2301 *tsc = kcontrol->private_data;
-+	unsigned long priv = kcontrol->private_value;
-+	/* mask == 1 : Switch
-+	 * mask > 1 : Volume */
-+	int mask = TSC2301_DOUBLE_MASK(priv);
-+	int shadow_index = TSC2301_SHADOW_INDEX(priv);
-+	u16 shadow_reg, shadow_reg_old;
-+	int ls = TSC2301_DOUBLE_LEFT_SHIFT(priv);
-+	int rs = TSC2301_DOUBLE_RIGHT_SHIFT(priv);
-+	int reg = TSC2301_PVAL_TO_REG(priv);
-+	int changed;
-+
-+	mutex_lock(&tsc->mixer->mutex);
-+	shadow_reg = shadow_reg_old = tsc->mixer->shadow_regs[shadow_index];
-+
-+	/* zero bits to be modified */
-+	shadow_reg &= ~((mask << ls) | (mask << rs));
-+	/* modify with new value */
-+	if (mask == 1) {
-+		/* switch. Invert switch values for the mute bits */
-+		shadow_reg |=
-+			((~ucontrol->value.integer.value[0] & mask) << ls) |
-+			((~ucontrol->value.integer.value[1] & mask) << rs);
-+	} else {
-+		/* volume */
-+		shadow_reg |=
-+			(ucontrol->value.integer.value[0] << ls) |
-+			(ucontrol->value.integer.value[1] << rs);
-+	}
-+
-+	changed = (shadow_reg != shadow_reg_old);
-+	tsc->mixer->shadow_regs[shadow_index] = shadow_reg;
-+
-+	/* update into TSC2301 if necessary */
-+	if (changed)
-+		tsc2301_write_reg(tsc, reg, shadow_reg);
-+
-+	if (mask == 1)
-+		/* check is need to power down/up audio blocks in case of
-+		 * muted state change */
-+		tsc2301_power_ctrl(tsc, shadow_index, 0);
-+	mutex_unlock(&tsc->mixer->mutex);
-+
-+	return changed;
-+}
-+
-+static int snd_tsc2301_info_mux(struct snd_kcontrol *kcontrol,
-+				struct snd_ctl_elem_info *uinfo)
-+{
-+	static char *texts[4] = {"Mic", "Line", "Line swapped", "Line mono"};
-+
-+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
-+	uinfo->count = 2;
-+	uinfo->value.enumerated.items = 4;
-+	if (uinfo->value.enumerated.item > 3)
-+		uinfo->value.enumerated.item = 3;
-+	strcpy(uinfo->value.enumerated.name,
-+	       texts[uinfo->value.enumerated.item]);
-+
-+	return 0;
-+}
-+
-+static int snd_tsc2301_get_mux(struct snd_kcontrol *kcontrol,
-+			       struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct tsc2301 *tsc = kcontrol->private_data;
-+	unsigned long priv = kcontrol->private_value;
-+	int mask = TSC2301_MUX_MASK(priv);
-+	int ls = TSC2301_MUX_LEFT_SHIFT(priv);
-+	int rs = TSC2301_MUX_RIGHT_SHIFT(priv);
-+	int shadow_index = TSC2301_SHADOW_INDEX(priv);
-+	u16 shadow_reg;
-+
-+	shadow_reg = tsc->mixer->shadow_regs[shadow_index];
-+	ucontrol->value.enumerated.item[0] = (shadow_reg >> ls) & mask;
-+	ucontrol->value.enumerated.item[1] = (shadow_reg >> rs) & mask;
-+
-+	return 0;
-+}
-+
-+static int snd_tsc2301_put_mux(struct snd_kcontrol *kcontrol,
-+			       struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct tsc2301 *tsc = kcontrol->private_data;
-+	unsigned long priv = kcontrol->private_value;
-+	int mask = TSC2301_MUX_MASK(priv);
-+	int shadow_index = TSC2301_SHADOW_INDEX(priv);
-+	u16 shadow_reg, shadow_reg_old;
-+	int ls = TSC2301_MUX_LEFT_SHIFT(priv);
-+	int rs = TSC2301_MUX_RIGHT_SHIFT(priv);
-+	int reg = TSC2301_PVAL_TO_REG(priv);
-+	int changed;
-+
-+	mutex_lock(&tsc->mixer->mutex);
-+	shadow_reg = shadow_reg_old = tsc->mixer->shadow_regs[shadow_index];
-+
-+	/* zero bits to be modified */
-+	shadow_reg &= ~((mask << ls) | (mask << rs));
-+	/* modify with new value */
-+	shadow_reg |= (ucontrol->value.enumerated.item[0] << ls);
-+	shadow_reg |= (ucontrol->value.enumerated.item[1] << rs);
-+
-+	changed = (shadow_reg != shadow_reg_old);
-+
-+	/* update into TSC2301 if necessary */
-+	if (changed) {
-+		tsc->mixer->shadow_regs[shadow_index] = shadow_reg;
-+		tsc2301_write_reg(tsc, reg, shadow_reg);
-+	}
-+
-+	/* check is need to power up/down audio blocks in case of ADC input
-+	 * change */
-+	tsc2301_power_ctrl(tsc, shadow_index, 0);
-+	mutex_unlock(&tsc->mixer->mutex);
-+
-+	return changed;
-+}
-+
-+static int snd_tsc2301_info_bool(struct snd_kcontrol *kcontrol,
-+				 struct snd_ctl_elem_info *uinfo)
-+{
-+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
-+	uinfo->count = 1;
-+	uinfo->value.integer.min = 0;
-+	uinfo->value.integer.max = 1;
-+
-+	return 0;
-+}
-+
-+static int snd_tsc2301_get_bool(struct snd_kcontrol *kcontrol,
-+				struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct tsc2301 *tsc = kcontrol->private_data;
-+	unsigned long priv = kcontrol->private_value;
-+	int shadow_index = TSC2301_SHADOW_INDEX(priv);
-+	int shift = TSC2301_BOOL_SHIFT(priv);
-+	int invert = TSC2301_BOOL_INVERT(priv);
-+	u16 shadow_reg;
-+
-+	shadow_reg = tsc->mixer->shadow_regs[shadow_index];
-+	ucontrol->value.integer.value[0] =
-+		invert ^ ((shadow_reg >> shift) & 1);
-+
-+	return 0;
-+}
-+
-+static int snd_tsc2301_put_bool(struct snd_kcontrol *kcontrol,
-+				struct snd_ctl_elem_value *ucontrol)
-+{
-+	struct tsc2301 *tsc = kcontrol->private_data;
-+	unsigned long priv = kcontrol->private_value;
-+	int shadow_index = TSC2301_SHADOW_INDEX(priv);
-+	int shift = TSC2301_BOOL_SHIFT(priv);
-+	int invert = TSC2301_BOOL_INVERT(priv);
-+	int reg = TSC2301_PVAL_TO_REG(priv);
-+	u16 shadow_reg, shadow_reg_old;
-+	int changed;
-+
-+	mutex_lock(&tsc->mixer->mutex);
-+	shadow_reg = shadow_reg_old = tsc->mixer->shadow_regs[shadow_index];
-+
-+	/* zero bit to be modified */
-+	shadow_reg &= ~(1 << shift);
-+	/* modify with new value */
-+	shadow_reg |=
-+		(invert ^ (ucontrol->value.integer.value[0] & 1)) << shift;
-+
-+	changed = (shadow_reg != shadow_reg_old);
-+
-+	/* update into TSC2301 if necessary */
-+	if (changed) {
-+		tsc->mixer->shadow_regs[shadow_index] = shadow_reg;
-+		if ((shadow_index == GPIO_INDEX) &&
-+		    (tsc->mixer->shadow_regs[PD_MISC_INDEX] &
-+		     TSC2301_REG_PD_MISC_APD)) {
-+			/* changing GPIO control and audio is powered down.
-+			 * Update GPIO states according to their power-down
-+			 * flag */
-+			tsc2301_gpio_power_down(tsc);
-+		} else
-+			tsc2301_write_reg(tsc, reg, shadow_reg);
-+	}
-+	mutex_unlock(&tsc->mixer->mutex);
-+
-+	return changed;
-+}
-+
-+/* TSC2301 internal mixer controls */
-+static struct snd_kcontrol_new snd_tsc2301_controls[] = {
-+	/* stereo ADC input switches and volumes */
-+	TSC2301_DOUBLE("Capture Switch", 0,
-+		TSC2301_REG_ADCVOL, ADCVOL_INDEX,
-+		TSC2301_MUTE_LEFT_SHIFT, TSC2301_MUTE_RIGHT_SHIFT,
-+		1, 0),
-+	TSC2301_DOUBLE("Capture Volume", 0,
-+		TSC2301_REG_ADCVOL, ADCVOL_INDEX,
-+		TSC2301_VOL_LEFT_SHIFT, TSC2301_VOL_RIGHT_SHIFT,
-+		TSC2301_VOLUME_MASK, TSC2301_MIN_ADCVOL),
-+
-+	/* stereo DAC output switches and volumes */
-+	TSC2301_DOUBLE("PCM Playback Switch", 0,
-+		TSC2301_REG_DACVOL, DACVOL_INDEX,
-+		TSC2301_MUTE_LEFT_SHIFT, TSC2301_MUTE_RIGHT_SHIFT,
-+		1, 0),
-+	TSC2301_DOUBLE("PCM Playback Volume", 0,
-+		TSC2301_REG_DACVOL, DACVOL_INDEX,
-+		TSC2301_VOL_LEFT_SHIFT, TSC2301_VOL_RIGHT_SHIFT,
-+		TSC2301_VOLUME_MASK, TSC2301_MIN_DACVOL),
-+
-+	/* stereo line input bypass switches and volumes */
-+	TSC2301_DOUBLE("Line Playback Switch", 0,
-+		TSC2301_REG_BPVOL, BPVOL_INDEX,
-+		TSC2301_MUTE_LEFT_SHIFT, TSC2301_MUTE_RIGHT_SHIFT,
-+		1, 0),
-+	TSC2301_DOUBLE("Line Playback Volume", 0,
-+		TSC2301_REG_BPVOL, BPVOL_INDEX,
-+		TSC2301_VOL_LEFT_SHIFT, TSC2301_VOL_RIGHT_SHIFT,
-+		TSC2301_VOLUME_MASK, TSC2301_MIN_BPVOL),
-+
-+	/* mono microphone input gain */
-+	TSC2301_SINGLE("Mic Boost", 0,
-+		TSC2301_REG_AUDCNTL, AUDCNTL_INDEX,
-+		TSC2301_MICG_SHIFT,
-+		TSC2301_MICG_MASK, TSC2301_MICG_MIN),
-+
-+	/* ADC input sources. Both channels could be selected separately */
-+	TSC2301_MUX("Capture Source", 0,
-+		TSC2301_REG_AUDCNTL, AUDCNTL_INDEX,
-+		TSC2301_INML_SHIFT, TSC2301_INMR_SHIFT,
-+		TSC2301_INM_MASK),
-+};
-+
-+/* must be called tsc->mixer->mutex locked */
-+static void tsc2301_flush_shadow_regs(struct tsc2301 *tsc)
-+{
-+	int i, page, addr;
-+	u16 temp;
-+
-+	page = TSC2301_REG_TO_PAGE(TSC2301_REG_AUDCNTL);
-+	addr = TSC2301_REG_TO_ADDR(TSC2301_REG_AUDCNTL);
-+
-+	for (i = 0; i < 4; i++) {
-+		temp = tsc->mixer->shadow_regs[i];
-+		tsc2301_write_reg(tsc, TSC2301_REG(page, addr + i), temp);
-+	}
-+	temp = tsc->mixer->shadow_regs[GPIO_INDEX];
-+	tsc2301_write_reg(tsc, TSC2301_REG_GPIO, temp);
-+
-+	/* Update power state of all audio blocks depending are they
-+	 * muted or unused. */
-+	tsc2301_power_ctrl(tsc, -1, 0);
-+}
-+
-+#ifdef CONFIG_PM
-+int tsc2301_mixer_suspend(struct tsc2301 *tsc)
-+{
-+	/* power down entire audio section inside TSC2301 in case the
-+	 * chip is still powered during the system sleep. However this driver
-+	 * doesn't require that chip is powered because registers are restored
-+	 * in function tsc2301_mixer_resume */
-+	mutex_lock(&tsc->mixer->mutex);
-+	tsc2301_gpio_power_down(tsc);
-+	tsc->mixer->shadow_regs[PD_MISC_INDEX] |= TSC2301_REG_PD_MISC_APD;
-+	tsc2301_write_reg(tsc, TSC2301_REG_PD_MISC,
-+			  tsc->mixer->shadow_regs[PD_MISC_INDEX]);
-+	mutex_unlock(&tsc->mixer->mutex);
-+	return 0;
-+}
-+
-+void tsc2301_mixer_resume(struct tsc2301 *tsc)
-+{
-+	/* power up the TSC2301 audio section and restore registers */
-+	mutex_lock(&tsc->mixer->mutex);
-+	tsc->mixer->shadow_regs[PD_MISC_INDEX] &= ~TSC2301_REG_PD_MISC_APD;
-+	tsc2301_flush_shadow_regs(tsc);
-+	mutex_unlock(&tsc->mixer->mutex);
-+}
-+#endif
-+
-+void tsc2301_mixer_enable_mclk(struct device *dev)
-+{
-+	struct tsc2301 *tsc = dev_get_drvdata(dev);
-+	struct tsc2301_mixer *mix = tsc->mixer;
-+
-+	mutex_lock(&mix->mutex);
-+	if (!mix->mclk_enabled++ && tsc->enable_clock != NULL) {
-+		tsc->enable_clock(dev);
-+	}
-+	tsc2301_power_ctrl(tsc, -1, 1);
-+	mutex_unlock(&mix->mutex);
-+}
-+
-+void tsc2301_mixer_disable_mclk(struct device *dev)
-+{
-+	struct tsc2301 *tsc = dev_get_drvdata(dev);
-+	struct tsc2301_mixer *mix = tsc->mixer;
-+
-+	mutex_lock(&mix->mutex);
-+	mix->mclk_enabled--;
-+	tsc2301_power_ctrl(tsc, -1, 1);
-+	if (!mix->mclk_enabled && tsc->disable_clock != NULL) {
-+		tsc->disable_clock(dev);
-+	}
-+	mutex_unlock(&mix->mutex);
-+}
-+
-+static void tsc2301_mixer_delayed_power_down(struct work_struct *work)
-+{
-+	struct tsc2301_mixer *mix = container_of(work, struct tsc2301_mixer,
-+						 delayed_power_down.work);
-+	struct tsc2301 *tsc = mix->tsc;
-+
-+	mutex_lock(&mix->mutex);
-+	if (!mix->delayed_pd_active) {
-+		mutex_unlock(&mix->mutex);
-+		return;
-+	}
-+	mix->delayed_pd_active = 0;
-+	mutex_unlock(&mix->mutex);
-+	tsc2301_mixer_disable_mclk(&tsc->spi->dev);
-+}
-+
-+/*
-+ * Allows audio controller driver to notify its usage of ADC and DAC
-+ */
-+void tsc2301_mixer_set_power(struct device *dev, int dac, int adc)
-+{
-+	struct tsc2301 *tsc = dev_get_drvdata(dev);
-+
-+	mutex_lock(&tsc->mixer->mutex);
-+	tsc->mixer->adc_enabled = adc;
-+	tsc->mixer->dac_enabled = dac;
-+
-+	/* update power state of all audio blocks */
-+	tsc2301_power_ctrl(tsc, -1, 1);
-+	mutex_unlock(&tsc->mixer->mutex);
-+}
-+
-+/*
-+ * Registers TSC2301 ALSA Mixer controls for the given sound card
-+ */
-+int tsc2301_mixer_register_controls(struct device *dev, struct snd_card *card)
-+{
-+	struct tsc2301 *tsc = dev_get_drvdata(dev);
-+	struct tsc2301_mixer *mix = tsc->mixer;
-+	int i, err;
-+
-+	/* Register ALSA mixer controls */
-+	for (i = 0; i < ARRAY_SIZE(snd_tsc2301_controls); i++) {
-+		err = snd_ctl_add(card,
-+				  snd_ctl_new1(&snd_tsc2301_controls[i], tsc));
-+		if (err < 0)
-+			return err;
-+	}
-+
-+	if (!mix->n_mixer_gpios)
-+		return 0;
-+
-+	/* Register additional GPIO controls if defined */
-+	for (i = 0; i < mix->n_mixer_gpios; i++) {
-+		const struct tsc2301_mixer_gpio *mg = mix->mixer_gpios + i;
-+		struct snd_kcontrol *ctrlp;
-+		struct snd_kcontrol_new ctrl =
-+			TSC2301_BOOL((char *)mg->name, 0,
-+				     TSC2301_REG_GPIO, GPIO_INDEX,
-+				     mg->gpio, mg->inverted, mg->def_enable);
-+
-+		ctrlp = snd_ctl_new1(&ctrl, tsc);
-+		err = snd_ctl_add(card, ctrlp);
-+		if (err < 0)
-+			return err;
-+	}
-+
-+	return 0;
-+}
-+
-+int tsc2301_mixer_init(struct tsc2301 *tsc,
-+		       struct tsc2301_platform_data *pdata)
-+{
-+	struct tsc2301_mixer *mix;
-+	int err = 0;
-+	u16 w;
-+
-+	mix = kzalloc(sizeof(*mix), GFP_KERNEL);
-+	if (mix == NULL)
-+		return -ENOMEM;
-+	tsc->mixer = mix;
-+
-+	mix->tsc = tsc;
-+	mutex_init(&mix->mutex);
-+	mix->platform_init = pdata->codec_init;
-+	mix->platform_cleanup = pdata->codec_cleanup;
-+	mix->pll_output = pdata->pll_output;
-+
-+	INIT_DELAYED_WORK(&mix->delayed_power_down,
-+			  tsc2301_mixer_delayed_power_down);
-+
-+	/* initialize shadow register default values */
-+	w = 0xc000;
-+	w |= (pdata->mclk_ratio << 6) | (pdata->i2s_sample_rate << 2);
-+	w |= pdata->i2s_format;
-+	mix->shadow_regs[AUDCNTL_INDEX] = w;
-+	mix->shadow_regs[ADCVOL_INDEX] = 0xd7d7;
-+	mix->shadow_regs[DACVOL_INDEX] = 0xffff;
-+	mix->shadow_regs[BPVOL_INDEX] = 0xe7e7;
-+	mix->shadow_regs[PD_MISC_INDEX] = pdata->power_down_blocks;
-+
-+	/* if extra mixer controls configured, then configure associated
-+	 * GPIOs as output and drive their default state */
-+	if (pdata->n_mixer_gpios) {
-+		int i;
-+
-+		w = 0;
-+		for (i = 0; i < pdata->n_mixer_gpios; i++) {
-+			const struct tsc2301_mixer_gpio *mg;
-+			int gpio;
-+
-+			mg = pdata->mixer_gpios + i;
-+			gpio = mg->gpio;
-+			w |= (1 << gpio) << 8;
-+			w |= (mg->inverted ^ mg->def_enable) << gpio;
-+		}
-+		mix->shadow_regs[GPIO_INDEX] = w;
-+
-+		mix->mixer_gpios = kmalloc(sizeof(*pdata->mixer_gpios) *
-+					   pdata->n_mixer_gpios,
-+					   GFP_KERNEL);
-+		if (mix->mixer_gpios == NULL) {
-+			err = -ENOMEM;
-+			goto err1;
-+		}
-+		memcpy(mix->mixer_gpios, pdata->mixer_gpios,
-+		       sizeof(*pdata->mixer_gpios) * pdata->n_mixer_gpios);
-+		mix->n_mixer_gpios = pdata->n_mixer_gpios;
-+	}
-+
-+	/* PLL control */
-+	tsc2301_write_pll(tsc, pdata->pll_n, pdata->pll_a, pdata->pll_pdc,
-+			  0, mix->pll_output ? 0 : 1);
-+
-+	tsc2301_flush_shadow_regs(tsc);
-+
-+	if (mix->platform_init != NULL) {
-+		err = mix->platform_init(&tsc->spi->dev);
-+		if (err < 0)
-+			goto err2;
-+	}
-+
-+	return 0;
-+err2:
-+	if (mix->mixer_gpios != NULL)
-+		kfree(mix->mixer_gpios);
-+err1:
-+	kfree(mix);
-+	return err;
-+}
-+
-+void tsc2301_mixer_exit(struct tsc2301 *tsc)
-+{
-+	struct tsc2301_mixer *mixer = tsc->mixer;
-+
-+	if (mixer->platform_cleanup != NULL)
-+		mixer->platform_cleanup(&tsc->spi->dev);
-+
-+	if (mixer->mixer_gpios != NULL)
-+		kfree(mixer->mixer_gpios);
-+}
-+
-+MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@nokia.com>");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/include/linux/spi/tsc2301.h
-@@ -0,0 +1,208 @@
-+#ifndef _LINUX_SPI_TSC2301_H
-+#define _LINUX_SPI_TSC2301_H
-+
-+#include <linux/types.h>
-+#include <linux/timer.h>
-+
-+struct tsc2301_platform_data {
-+	/*
-+	 * Keypad
-+	 */
-+	s16	reset_gpio;
-+	s16	keyb_int;
-+	s16	keymap[16];	/* Set a key to a negative value if not used */
-+	unsigned kp_rep:1;	/* Enable keypad repeating */
-+	char    *keyb_name;     /* Keyboard device name */
-+
-+	/*
-+	 * Touchscreen
-+	 */
-+	s16	dav_int;
-+	u16	ts_x_plate_ohm;
-+	u32	ts_stab_time;	/* voltage settling time */
-+	u8	ts_hw_avg;	/* HW assiseted averaging. Can be
-+				   0, 4, 8, 16 samples per reading */
-+	u32	ts_max_pressure;/* Samples with bigger pressure value will
-+				   be ignored, since the corresponding X, Y
-+				   values are unreliable */
-+	u32	ts_touch_pressure;	/* Pressure limit until we report a
-+					   touch event. After that we switch
-+					   to ts_max_pressure. */
-+	u32	ts_pressure_fudge;
-+	u32	ts_x_max;
-+	u32	ts_x_fudge;
-+	u32	ts_y_max;
-+	u32	ts_y_fudge;
-+
-+	/*
-+	 * Audio
-+	 */
-+	unsigned	pll_pdc:4;
-+	unsigned	pll_a:4;
-+	unsigned	pll_n:4;
-+	unsigned	pll_output:1; /* Output PLL on GPIO_0 */
-+
-+	unsigned	mclk_ratio:2;
-+	unsigned	i2s_sample_rate:4;
-+	unsigned	i2s_format:2;
-+	/* Mask for audio blocks to be powered down */
-+	u16		power_down_blocks;
-+
-+	/* Called after codec has been initialized, can be NULL */
-+	int (* codec_init)(struct device *tsc2301_dev);
-+	/* Called when codec is being removed, can be NULL */
-+	void (* codec_cleanup)(struct device *tsc2301_dev);
-+	int	(*enable_clock)(struct device *dev);
-+	void	(*disable_clock)(struct device *dev);
-+
-+	const struct tsc2301_mixer_gpio {
-+		const char	*name;
-+		unsigned	gpio:4;
-+		unsigned	inverted:1;
-+		unsigned	def_enable:1; /* enable by default */
-+		unsigned	deactivate_on_pd:1; /* power-down flag */
-+	} *mixer_gpios;
-+	int	n_mixer_gpios;
-+};
-+
-+struct tsc2301_kp;
-+struct tsc2301_ts;
-+struct tsc2301_mixer;
-+
-+struct tsc2301 {
-+	struct spi_device	*spi;
-+
-+	s16			reset_gpio;
-+	u16			config2_shadow;
-+
-+        struct tsc2301_kp	*kp;
-+	struct tsc2301_ts	*ts;
-+	struct tsc2301_mixer	*mixer;
-+
-+	int			(*enable_clock)(struct device *dev);
-+	void			(*disable_clock)(struct device *dev);
-+};
-+
-+
-+#define TSC2301_HZ	33000000
-+
-+#define TSC2301_REG(page, addr)  (((page) << 11) | ((addr) << 5))
-+#define TSC2301_REG_TO_PAGE(reg) (((reg) >> 11) & 0x03)
-+#define TSC2301_REG_TO_ADDR(reg) (((reg) >> 5)  & 0x1f)
-+
-+#define TSC2301_REG_X		TSC2301_REG(0, 0)
-+#define TSC2301_REG_Y		TSC2301_REG(0, 1)
-+#define TSC2301_REG_Z1		TSC2301_REG(0, 2)
-+#define TSC2301_REG_Z2		TSC2301_REG(0, 3)
-+#define TSC2301_REG_KPDATA	TSC2301_REG(0, 4)
-+#define TSC2301_REG_ADC		TSC2301_REG(1, 0)
-+#define TSC2301_REG_KEY		TSC2301_REG(1, 1)
-+#define TSC2301_REG_DAC		TSC2301_REG(1, 2)
-+#define TSC2301_REG_REF		TSC2301_REG(1, 3)
-+#define TSC2301_REG_RESET	TSC2301_REG(1, 4)
-+#define TSC2301_REG_CONFIG	TSC2301_REG(1, 5)
-+#define TSC2301_REG_CONFIG2	TSC2301_REG(1, 6)
-+#define TSC2301_REG_KPMASK	TSC2301_REG(1, 16)
-+#define TSC2301_REG_AUDCNTL	TSC2301_REG(2, 0)
-+#define TSC2301_REG_ADCVOL	TSC2301_REG(2, 1)
-+#define TSC2301_REG_DACVOL	TSC2301_REG(2, 2)
-+#define TSC2301_REG_BPVOL	TSC2301_REG(2, 3)
-+#define TSC2301_REG_KEYCTL	TSC2301_REG(2, 4)
-+#define TSC2301_REG_PD_MISC	TSC2301_REG(2, 5)
-+#define TSC2301_REG_GPIO	TSC2301_REG(2, 6)
-+#define TSC2301_REG_ADCLKCFG	TSC2301_REG(2, 27)
-+
-+#define TSC2301_REG_PD_MISC_APD		(1 << 15)
-+#define TSC2301_REG_PD_MISC_AVPD	(1 << 14)
-+#define TSC2301_REG_PD_MISC_ABPD	(1 << 13)
-+#define TSC2301_REG_PD_MISC_HAPD	(1 << 12)
-+#define TSC2301_REG_PD_MISC_MOPD	(1 << 11)
-+#define TSC2301_REG_PD_MISC_DAPD	(1 << 10)
-+#define TSC2301_REG_PD_MISC_ADPDL	(1 << 9)
-+#define TSC2301_REG_PD_MISC_ADPDR	(1 << 8)
-+#define TSC2301_REG_PD_MISC_PDSTS	(1 << 7)
-+#define TSC2301_REG_PD_MISC_MIBPD	(1 << 6)
-+#define TSC2301_REG_PD_MISC_OTSYN	(1 << 2)
-+
-+/* I2S sample rate */
-+#define TSC2301_I2S_SR_48000	0x00
-+#define TSC2301_I2S_SR_44100	0x01
-+#define TSC2301_I2S_SR_32000	0x02
-+#define TSC2301_I2S_SR_24000	0x03
-+#define TSC2301_I2S_SR_22050	0x04
-+#define TSC2301_I2S_SR_16000	0x05
-+#define TSC2301_I2S_SR_12000	0x06
-+#define TSC2301_I2S_SR_11050	0x07
-+#define TSC2301_I2S_SR_8000	0x08
-+
-+/* 16-bit, MSB-first. DAC Right-Justified, ADC Left-Justified */
-+#define TSC2301_I2S_FORMAT0	0x00
-+/* 20-bit, MSB-first. DAC Right-Justified, ADC Left-Justified */
-+#define TSC2301_I2S_FORMAT1	0x01
-+/* 20-bit, MSB-first. DAC Left-Justified, ADC Left-Justified */
-+#define TSC2301_I2S_FORMAT2	0x02
-+/* 20-bit, MSB-first */
-+#define TSC2301_I2S_FORMAT3	0x03
-+
-+/* Master Clock Ratio */
-+#define TSC2301_MCLK_256xFS	0x00 /* default */
-+#define TSC2301_MCLK_384xFS	0x01
-+#define TSC2301_MCLK_512xFS	0x02
-+
-+
-+extern u16 tsc2301_read_reg(struct tsc2301 *tsc, int reg);
-+extern void tsc2301_write_reg(struct tsc2301 *tsc, int reg, u16 val);
-+extern void tsc2301_write_kbc(struct tsc2301 *tsc, int val);
-+extern void tsc2301_write_pll(struct tsc2301 *tsc, int pll_n, int pll_a,
-+			      int pll_pdc, int pct_e, int pll_o);
-+extern void tsc2301_read_buf(struct tsc2301 *tsc, int reg, u16 *buf, int len);
-+
-+#define TSC2301_DECL_MOD(module)					\
-+extern int  tsc2301_##module##_init(struct tsc2301 *tsc,		\
-+			   struct tsc2301_platform_data *pdata);	\
-+extern void tsc2301_##module##_exit(struct tsc2301 *tsc);		\
-+extern int  tsc2301_##module##_suspend(struct tsc2301 *tsc);		\
-+extern void tsc2301_##module##_resume(struct tsc2301 *tsc);
-+
-+#define TSC2301_DECL_EMPTY_MOD(module)					\
-+static inline int tsc2301_##module##_init(struct tsc2301 *tsc,		\
-+			   struct tsc2301_platform_data *pdata)		\
-+{									\
-+	return 0;							\
-+}									\
-+static inline void tsc2301_##module##_exit(struct tsc2301 *tsc) {}	\
-+static inline int  tsc2301_##module##_suspend(struct tsc2301 *tsc)	\
-+{									\
-+	return 0;							\
-+}									\
-+static inline void tsc2301_##module##_resume(struct tsc2301 *tsc) {}
-+
-+#ifdef CONFIG_KEYBOARD_TSC2301
-+TSC2301_DECL_MOD(kp)
-+void tsc2301_kp_restart(struct tsc2301 *tsc);
-+#else
-+TSC2301_DECL_EMPTY_MOD(kp)
-+static inline void tsc2301_kp_restart(struct tsc2301 *tsc) {}
-+#endif
-+
-+#ifdef CONFIG_TOUCHSCREEN_TSC2301
-+TSC2301_DECL_MOD(ts)
-+#else
-+TSC2301_DECL_EMPTY_MOD(ts)
-+#endif
-+
-+#ifdef CONFIG_SPI_TSC2301_AUDIO
-+TSC2301_DECL_MOD(mixer)
-+extern void tsc2301_mixer_set_power(struct device *tsc_dev, int dac, int adc);
-+
-+struct snd_card;
-+extern int tsc2301_mixer_register_controls(struct device *tsc_dev,
-+					   struct snd_card *card);
-+#else
-+TSC2301_DECL_EMPTY_MOD(mixer)
-+#endif
-+
-+extern void tsc2301_mixer_enable_mclk(struct device *tsc_dev);
-+extern void tsc2301_mixer_disable_mclk(struct device *tsc_dev);
-+
-+#endif
diff --git a/target/linux/omap24xx/patches-3.3/320-nokia-various.patch b/target/linux/omap24xx/patches-3.3/320-nokia-various.patch
deleted file mode 100644
index 5d89b8f12b..0000000000
--- a/target/linux/omap24xx/patches-3.3/320-nokia-various.patch
+++ /dev/null
@@ -1,194 +0,0 @@
---- a/arch/arm/mach-omap2/board-n8x0.c
-+++ b/arch/arm/mach-omap2/board-n8x0.c
-@@ -25,6 +25,8 @@
- #include <linux/usb/musb.h>
- #include <sound/tlv320aic3x.h>
- #include <linux/spi/tsc2005.h>
-+#include <linux/input.h>
-+#include <linux/i2c/lm8323.h>
- 
- #include <asm/mach/arch.h>
- #include <asm/mach-types.h>
-@@ -37,6 +39,7 @@
- #include <plat/onenand.h>
- #include <plat/mmc.h>
- #include <plat/serial.h>
-+#include <plat/gpio-switch.h>
- 
- #include "mux.h"
- 
-@@ -104,6 +107,152 @@ extern struct mipid_platform_data n8x0_m
- extern void n8x0_mipid_init(void);
- extern void n8x0_blizzard_init(void);
- 
-+/* We map the FN key as LALT to workaround an X keycode problem.
-+ * The XKB map needs to be adjusted to support this. */
-+#define MAP_FN_AS_LEFTALT
-+
-+static s16 rx44_keymap[LM8323_KEYMAP_SIZE] = {
-+	[0x01] = KEY_Q,
-+	[0x02] = KEY_K,
-+	[0x03] = KEY_O,
-+	[0x04] = KEY_P,
-+	[0x05] = KEY_BACKSPACE,
-+	[0x06] = KEY_A,
-+	[0x07] = KEY_S,
-+	[0x08] = KEY_D,
-+	[0x09] = KEY_F,
-+	[0x0a] = KEY_G,
-+	[0x0b] = KEY_H,
-+	[0x0c] = KEY_J,
-+
-+	[0x11] = KEY_W,
-+	[0x12] = KEY_F4,
-+	[0x13] = KEY_L,
-+	[0x14] = KEY_APOSTROPHE,
-+	[0x16] = KEY_Z,
-+	[0x17] = KEY_X,
-+	[0x18] = KEY_C,
-+	[0x19] = KEY_V,
-+	[0x1a] = KEY_B,
-+	[0x1b] = KEY_N,
-+	[0x1c] = KEY_LEFTSHIFT, /* Actually, this is both shift keys */
-+	[0x1f] = KEY_F7,
-+
-+	[0x21] = KEY_E,
-+	[0x22] = KEY_SEMICOLON,
-+	[0x23] = KEY_MINUS,
-+	[0x24] = KEY_EQUAL,
-+#ifdef MAP_FN_AS_LEFTALT
-+	[0x2b] = KEY_LEFTALT,
-+#else
-+	[0x2b] = KEY_FN,
-+#endif
-+	[0x2c] = KEY_M,
-+	[0x2f] = KEY_F8,
-+
-+	[0x31] = KEY_R,
-+	[0x32] = KEY_RIGHTCTRL,
-+	[0x34] = KEY_SPACE,
-+	[0x35] = KEY_COMMA,
-+	[0x37] = KEY_UP,
-+	[0x3c] = KEY_COMPOSE,
-+	[0x3f] = KEY_F6,
-+
-+	[0x41] = KEY_T,
-+	[0x44] = KEY_DOT,
-+	[0x46] = KEY_RIGHT,
-+	[0x4f] = KEY_F5,
-+	[0x51] = KEY_Y,
-+	[0x53] = KEY_DOWN,
-+	[0x55] = KEY_ENTER,
-+	[0x5f] = KEY_ESC,
-+
-+	[0x61] = KEY_U,
-+	[0x64] = KEY_LEFT,
-+
-+	[0x71] = KEY_I,
-+	[0x75] = KEY_KPENTER,
-+};
-+
-+static struct lm8323_platform_data lm8323_pdata = {
-+	.repeat		= 0, /* Repeat is handled in userspace for now. */
-+	.keymap		= rx44_keymap,
-+	.size_x		= 8,
-+	.size_y		= 12,
-+	.debounce_time	= 12,
-+	.active_time	= 500,
-+
-+	.name		= "Internal keyboard",
-+	.pwm_names[0] 	= "n810::keyboard",
-+	.pwm_names[1] 	= "n810::cover",
-+};
-+
-+#define OMAP_TAG_NOKIA_BT	0x4e01
-+
-+struct omap_bluetooth_config {
-+	u8    chip_type;
-+	u8    bt_wakeup_gpio;
-+	u8    host_wakeup_gpio;
-+	u8    reset_gpio;
-+	u8    bt_uart;
-+	u8    bd_addr[6];
-+	u8    bt_sysclk;
-+};
-+
-+static struct platform_device n8x0_bt_device = {
-+	.name           = "hci_h4p",
-+	.id             = -1,
-+	.num_resources  = 0,
-+};
-+
-+void __init n8x0_bt_init(void)
-+{
-+	const struct omap_bluetooth_config *bt_config;
-+
-+	bt_config = (void *) omap_get_config(OMAP_TAG_NOKIA_BT,
-+					     struct omap_bluetooth_config);
-+	n8x0_bt_device.dev.platform_data = (void *) bt_config;
-+	if (platform_device_register(&n8x0_bt_device) < 0)
-+		BUG();
-+}
-+
-+static struct omap_gpio_switch n8x0_gpio_switches[] __initdata = {
-+	{
-+		.name			= "headphone",
-+		.gpio			= -1,
-+		.debounce_rising	= 200,
-+		.debounce_falling	= 200,
-+	}, {
-+		.name			= "cam_act",
-+		.gpio			= -1,
-+		.debounce_rising	= 200,
-+		.debounce_falling	= 200,
-+	}, {
-+		.name			= "cam_turn",
-+		.gpio			= -1,
-+		.debounce_rising	= 100,
-+		.debounce_falling	= 100,
-+	}, {
-+		.name			= "slide",
-+		.gpio			= -1,
-+		.debounce_rising	= 200,
-+		.debounce_falling	= 200,
-+	}, {
-+		.name			= "kb_lock",
-+		.gpio			= -1,
-+		.debounce_rising	= 200,
-+		.debounce_falling	= 200,
-+	},
-+};
-+
-+static void __init n8x0_gpio_switches_init(void)
-+{
-+	/* The switches are actually registered through ATAG mechanism.
-+	 * This just updates the parameters (thus .gpio is -1) */
-+	omap_register_gpio_switches(n8x0_gpio_switches,
-+				    ARRAY_SIZE(n8x0_gpio_switches));
-+}
-+
- #define TUSB6010_ASYNC_CS	1
- #define TUSB6010_SYNC_CS	4
- #define TUSB6010_GPIO_INT	58
-@@ -799,6 +948,11 @@ static struct aic3x_pdata n810_aic33_dat
- };
- 
- static struct i2c_board_info n810_i2c_board_info_2[] __initdata = {
-+ 	{
-+		I2C_BOARD_INFO("lm8323", 0x45),
-+		.irq		= OMAP_GPIO_IRQ(109),
-+		.platform_data	= &lm8323_pdata,
-+	},
- 	{
- 		I2C_BOARD_INFO("tlv320aic3x", 0x18),
- 		.platform_data = &n810_aic33_data,
-@@ -856,7 +1010,9 @@ static inline void board_serial_init(voi
- static void __init n8x0_init_machine(void)
- {
- 	omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
-+	n8x0_gpio_switches_init();
- 	n8x0_cbus_init();
-+	n8x0_bt_init();
- 
- 	/* FIXME: add n810 spi devices */
- 	tsc2005_set_config();
diff --git a/target/linux/omap24xx/patches-3.3/330-n800-tsc2301-platform.patch b/target/linux/omap24xx/patches-3.3/330-n800-tsc2301-platform.patch
deleted file mode 100644
index 4ceada952e..0000000000
--- a/target/linux/omap24xx/patches-3.3/330-n800-tsc2301-platform.patch
+++ /dev/null
@@ -1,212 +0,0 @@
-From f0bb9e67f0f13021e5033fed3dfe8ef78fe6a538 Mon Sep 17 00:00:00 2001
-From: Marat Radchenko <marat@slonopotamus.org>
-Date: Tue, 18 Oct 2011 21:52:56 +0400
-Subject: [PATCH 2/2] N800: add TSC2301 board info
-
-This patch adds TSC2301 init logic to N800 board file
----
- arch/arm/mach-omap2/board-n8x0.c |  141 ++++++++++++++++++++++++++++++++++++--
- 1 files changed, 135 insertions(+), 6 deletions(-)
-
---- a/arch/arm/mach-omap2/board-n8x0.c
-+++ b/arch/arm/mach-omap2/board-n8x0.c
-@@ -27,6 +27,7 @@
- #include <linux/spi/tsc2005.h>
- #include <linux/input.h>
- #include <linux/i2c/lm8323.h>
-+#include <linux/spi/tsc2301.h>
- 
- #include <asm/mach/arch.h>
- #include <asm/mach-types.h>
-@@ -63,7 +64,75 @@ static struct omap2_mcspi_device_config
- };
- #endif
- 
--static void __init tsc2005_set_config(void)
-+#ifdef CONFIG_TOUCHSCREEN_TSC2301
-+
-+#define N800_KEYB_IRQ_GPIO		109
-+
-+static struct tsc2301_platform_data tsc2301_config = {
-+	.reset_gpio	= 118,
-+	.keymap = {
-+		-1,		/* Event for bit 0 */
-+		KEY_UP,		/* Event for bit 1 (up) */
-+		KEY_F5,		/* Event for bit 2 (home) */
-+		-1,		/* Event for bit 3 */
-+		KEY_LEFT,	/* Event for bit 4 (left) */
-+		KEY_ENTER,	/* Event for bit 5 (enter) */
-+		KEY_RIGHT,	/* Event for bit 6 (right) */
-+		-1,		/* Event for bit 7 */
-+		KEY_ESC,	/* Event for bit 8 (cycle) */
-+		KEY_DOWN,	/* Event for bit 9 (down) */
-+		KEY_F4,		/* Event for bit 10 (menu) */
-+		-1,		/* Event for bit 11 */
-+		KEY_F8,		/* Event for bit 12 (Zoom-) */
-+		KEY_F6,		/* Event for bit 13 (FS) */
-+		KEY_F7,		/* Event for bit 14 (Zoom+) */
-+		-1,		/* Event for bit 15 */
-+	},
-+	.kp_rep 	= 0,
-+	.keyb_name	= "Internal keypad",
-+};
-+
-+static struct omap2_mcspi_device_config tsc2301_mcspi_config = {
-+	.turbo_mode	= 0,
-+	.single_channel = 1,
-+};
-+
-+/*
-+  TODO(Marat Radchenko): better pass GPIO to tsc2301 driver and let it
-+  allocate irq itself (as it is already done for touchscreen)
-+ */
-+static void tsc2301_dev_init(void)
-+{
-+	int r;
-+	int gpio = N800_KEYB_IRQ_GPIO;
-+
-+	r = gpio_request(gpio, "tsc2301 KBD IRQ");
-+	if (r >= 0) {
-+		gpio_direction_input(gpio);
-+		tsc2301_config.keyb_int = gpio_to_irq(gpio);
-+	} else {
-+		printk(KERN_ERR "unable to get KBD GPIO");
-+	}
-+
-+	gpio = 103;
-+	r = gpio_request(gpio, "tsc2301 DAV IRQ");
-+	if (r >= 0) {
-+		gpio_direction_input(gpio);
-+		tsc2301_config.dav_int = gpio_to_irq(gpio);
-+	} else {
-+		printk(KERN_ERR "unable to get DAV GPIO");
-+	}
-+}
-+
-+#else
-+
-+static void __init tsc2301_dev_init(void)
-+{
-+}
-+
-+#endif
-+
-+static void __init n8x0_ts_set_config(void)
- {
- 	const struct omap_lcd_config *conf;
- 
-@@ -94,6 +163,37 @@ static void __init tsc2005_set_config(vo
- 			tsc2005_config.ts_x_plate_ohm = 200;
- 		}
- #endif
-+
-+#ifdef CONFIG_TOUCHSCREEN_TSC2301
-+		if (strcmp(conf->panel_name, "lph8923") == 0) {
-+			tsc2301_config.ts_x_plate_ohm	= 180;
-+			tsc2301_config.ts_hw_avg	= 8;
-+			tsc2301_config.ts_max_pressure	= 2048;
-+			tsc2301_config.ts_touch_pressure = 400;
-+			tsc2301_config.ts_stab_time	= 100;
-+			tsc2301_config.ts_pressure_fudge = 2;
-+			tsc2301_config.ts_x_max		= 4096;
-+			tsc2301_config.ts_x_fudge	= 4;
-+			tsc2301_config.ts_y_max		= 4096;
-+			tsc2301_config.ts_y_fudge	= 7;
-+		} else if (strcmp(conf->panel_name, "ls041y3") == 0) {
-+			tsc2301_config.ts_x_plate_ohm	= 280;
-+			tsc2301_config.ts_hw_avg	= 8;
-+			tsc2301_config.ts_touch_pressure = 400;
-+			tsc2301_config.ts_max_pressure	= 2048;
-+			tsc2301_config.ts_stab_time	= 1000;
-+			tsc2301_config.ts_pressure_fudge = 2;
-+			tsc2301_config.ts_x_max		= 4096;
-+			tsc2301_config.ts_x_fudge	= 4;
-+			tsc2301_config.ts_y_max		= 4096;
-+			tsc2301_config.ts_y_fudge	= 7;
-+		} else {
-+			printk(KERN_ERR "Unknown panel type, set default "
-+			       "touchscreen configuration\n");
-+			tsc2301_config.ts_x_plate_ohm	= 200;
-+			tsc2301_config.ts_stab_time	= 100;
-+		}
-+#endif
- 	}
- }
- 
-@@ -347,13 +447,12 @@ static void __init n8x0_usb_init(void) {
- 
- #endif /*CONFIG_USB_MUSB_TUSB6010 */
- 
--
- static struct omap2_mcspi_device_config p54spi_mcspi_config = {
- 	.turbo_mode	= 0,
- 	.single_channel = 1,
- };
- 
--static struct spi_board_info n800_spi_board_info[] __initdata = {
-+static struct spi_board_info n8x0_common_spi_board_info[] __initdata = {
- 	{
- 		.modalias	= "lcd_mipid",
- 		.bus_num	= 1,
-@@ -369,6 +468,10 @@ static struct spi_board_info n800_spi_bo
- 		.max_speed_hz   = 48000000,
- 		.controller_data = &p54spi_mcspi_config,
- 	},
-+};
-+
-+static struct spi_board_info n810_spi_board_info[] __initdata = {
-+#ifdef CONFIG_TOUCHSCREEN_TSC2005
- 	{
- 		.modalias	 = "tsc2005",
- 		.bus_num	 = 1,
-@@ -378,6 +481,20 @@ static struct spi_board_info n800_spi_bo
- 		.controller_data = &tsc2005_mcspi_config,
- 		.platform_data   = &tsc2005_config,
- 	},
-+#endif
-+};
-+
-+static struct spi_board_info n800_spi_board_info[] __initdata = {
-+#if defined(CONFIG_TOUCHSCREEN_TSC2301)
-+	{
-+		.modalias	 = "tsc2301",
-+		.bus_num	 = 1,
-+		.chip_select	 = 0,
-+		.max_speed_hz    = 6000000,
-+		.controller_data = &tsc2301_mcspi_config,
-+		.platform_data   = &tsc2301_config,
-+	},
-+#endif
- };
- 
- #if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-@@ -1015,9 +1132,17 @@ static void __init n8x0_init_machine(voi
- 	n8x0_bt_init();
- 
- 	/* FIXME: add n810 spi devices */
--	tsc2005_set_config();
--	spi_register_board_info(n800_spi_board_info,
--				ARRAY_SIZE(n800_spi_board_info));
-+	n8x0_ts_set_config();
-+
-+	spi_register_board_info(n8x0_common_spi_board_info,
-+				ARRAY_SIZE(n8x0_common_spi_board_info));
-+	if (machine_is_nokia_n800())
-+		spi_register_board_info(n800_spi_board_info,
-+					ARRAY_SIZE(n800_spi_board_info));
-+	else
-+		spi_register_board_info(n810_spi_board_info,
-+					ARRAY_SIZE(n810_spi_board_info));
-+
- 	omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1,
- 			      ARRAY_SIZE(n8x0_i2c_board_info_1));
- 	omap_register_i2c_bus(2, 400, NULL, 0);
-@@ -1027,6 +1152,8 @@ static void __init n8x0_init_machine(voi
- 	board_serial_init();
- 	n8x0_mipid_init();
- 	n8x0_blizzard_init();
-+	if (machine_is_nokia_n800())
-+		tsc2301_dev_init();
- 	omap_sdrc_init(NULL, NULL);
- 	gpmc_onenand_init(board_onenand_data);
- 	n8x0_mmc_init();
diff --git a/target/linux/omap24xx/patches-3.3/350-n8x0-gpioswitch-input.patch b/target/linux/omap24xx/patches-3.3/350-n8x0-gpioswitch-input.patch
deleted file mode 100644
index 1a6c2812e4..0000000000
--- a/target/linux/omap24xx/patches-3.3/350-n8x0-gpioswitch-input.patch
+++ /dev/null
@@ -1,98 +0,0 @@
----
- arch/arm/mach-omap2/board-n8x0.c |   73 +++++++++++++++++++++++++++++++++++++++
- 1 file changed, 73 insertions(+)
-
---- a/arch/arm/mach-omap2/board-n8x0.c
-+++ b/arch/arm/mach-omap2/board-n8x0.c
-@@ -316,6 +316,77 @@ void __init n8x0_bt_init(void)
- 		BUG();
- }
- 
-+struct gpio_switch_input_dev {
-+	struct input_dev *idev;
-+	unsigned int swcode;
-+};
-+
-+static struct gpio_switch_input_dev *slide_input;
-+static struct gpio_switch_input_dev *kblock_input;
-+
-+static void n8x0_gpio_switch_input_notify(struct gpio_switch_input_dev *gdev,
-+					  int state)
-+{
-+	if (gdev) {
-+		input_report_switch(gdev->idev, gdev->swcode, state);
-+		input_sync(gdev->idev);
-+	}
-+}
-+
-+static void n8x0_slide_notify(void *data, int state)
-+{
-+	n8x0_gpio_switch_input_notify(slide_input, state);
-+}
-+
-+static void n8x0_kb_lock_notify(void *data, int state)
-+{
-+	n8x0_gpio_switch_input_notify(kblock_input, state);
-+}
-+
-+static struct gpio_switch_input_dev * __init gpioswitch_input_init(
-+			const char *name,
-+			unsigned int swcode)
-+{
-+	struct gpio_switch_input_dev *gdev;
-+	int err;
-+
-+	gdev = kzalloc(sizeof(*gdev), GFP_KERNEL);
-+	if (!gdev)
-+		goto error;
-+	gdev->swcode = swcode;
-+
-+	gdev->idev = input_allocate_device();
-+	if (!gdev->idev)
-+		goto err_free;
-+
-+	gdev->idev->evbit[0] = BIT_MASK(EV_SW);
-+	gdev->idev->swbit[BIT_WORD(swcode)] = BIT_MASK(swcode);
-+	gdev->idev->name = name;
-+
-+	err = input_register_device(gdev->idev);
-+	if (err)
-+		goto err_free_idev;
-+
-+	return gdev;
-+
-+err_free_idev:
-+	input_free_device(gdev->idev);
-+err_free:
-+	kfree(gdev);
-+error:
-+	return NULL;
-+}
-+
-+static int __init n8x0_gpio_switches_input_init(void)
-+{
-+	slide_input = gpioswitch_input_init("slide", SW_KEYPAD_SLIDE);
-+	kblock_input = gpioswitch_input_init("kb_lock", SW_LID);
-+	if (WARN_ON(!slide_input || !kblock_input))
-+		return -ENODEV;
-+	return 0;
-+}
-+late_initcall(n8x0_gpio_switches_input_init);
-+
- static struct omap_gpio_switch n8x0_gpio_switches[] __initdata = {
- 	{
- 		.name			= "headphone",
-@@ -337,11 +408,13 @@ static struct omap_gpio_switch n8x0_gpio
- 		.gpio			= -1,
- 		.debounce_rising	= 200,
- 		.debounce_falling	= 200,
-+		.notify			= n8x0_slide_notify,
- 	}, {
- 		.name			= "kb_lock",
- 		.gpio			= -1,
- 		.debounce_rising	= 200,
- 		.debounce_falling	= 200,
-+		.notify			= n8x0_kb_lock_notify,
- 	},
- };
- 
diff --git a/target/linux/omap24xx/patches-3.3/400-bluetooth-hci_h4p.patch b/target/linux/omap24xx/patches-3.3/400-bluetooth-hci_h4p.patch
deleted file mode 100644
index 408da4a3a0..0000000000
--- a/target/linux/omap24xx/patches-3.3/400-bluetooth-hci_h4p.patch
+++ /dev/null
@@ -1,1946 +0,0 @@
----
- drivers/bluetooth/Kconfig           |   10 
- drivers/bluetooth/Makefile          |    1 
- drivers/bluetooth/hci_h4p/Makefile  |    7 
- drivers/bluetooth/hci_h4p/core.c    | 1043 ++++++++++++++++++++++++++++++++++++
- drivers/bluetooth/hci_h4p/fw-csr.c  |  149 +++++
- drivers/bluetooth/hci_h4p/fw-ti.c   |   90 +++
- drivers/bluetooth/hci_h4p/fw.c      |  155 +++++
- drivers/bluetooth/hci_h4p/hci_h4p.h |  183 ++++++
- drivers/bluetooth/hci_h4p/sysfs.c   |   84 ++
- drivers/bluetooth/hci_h4p/uart.c    |  169 +++++
- 10 files changed, 1891 insertions(+)
-
---- /dev/null
-+++ b/drivers/bluetooth/hci_h4p/core.c
-@@ -0,0 +1,1043 @@
-+/*
-+ * This file is part of hci_h4p bluetooth driver
-+ *
-+ * Copyright (C) 2005, 2006 Nokia Corporation.
-+ *
-+ * Contact: Ville Tervo <ville.tervo@nokia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-+ * 02110-1301 USA
-+ *
-+ */
-+
-+#include <linux/module.h>
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/errno.h>
-+#include <linux/delay.h>
-+#include <linux/spinlock.h>
-+#include <linux/serial_reg.h>
-+#include <linux/skbuff.h>
-+#include <linux/timer.h>
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/clk.h>
-+#include <linux/gpio.h>
-+
-+#include <mach/hardware.h>
-+#include <mach/board.h>
-+#include <mach/irqs.h>
-+#include <plat/serial.h>
-+
-+#include <net/bluetooth/bluetooth.h>
-+#include <net/bluetooth/hci_core.h>
-+#include <net/bluetooth/hci.h>
-+
-+#include "hci_h4p.h"
-+
-+#define PM_TIMEOUT 200
-+
-+struct omap_bluetooth_config {
-+	u8    chip_type;
-+	u8    bt_wakeup_gpio;
-+	u8    host_wakeup_gpio;
-+	u8    reset_gpio;
-+	u8    bt_uart;
-+	u8    bd_addr[6];
-+	u8    bt_sysclk;
-+};
-+
-+/* This should be used in function that cannot release clocks */
-+static void hci_h4p_set_clk(struct hci_h4p_info *info, int *clock, int enable)
-+{
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&info->clocks_lock, flags);
-+	if (enable && !*clock) {
-+		NBT_DBG_POWER("Enabling %p\n", clock);
-+		clk_enable(info->uart_fclk);
-+#ifdef CONFIG_ARCH_OMAP2
-+		if (cpu_is_omap24xx()) {
-+			clk_enable(info->uart_iclk);
-+			//omap2_block_sleep();
-+		}
-+#endif
-+	}
-+	if (!enable && *clock) {
-+		NBT_DBG_POWER("Disabling %p\n", clock);
-+		clk_disable(info->uart_fclk);
-+#ifdef CONFIG_ARCH_OMAP2
-+		if (cpu_is_omap24xx()) {
-+			clk_disable(info->uart_iclk);
-+			//omap2_allow_sleep();
-+		}
-+#endif
-+	}
-+
-+	*clock = enable;
-+	spin_unlock_irqrestore(&info->clocks_lock, flags);
-+}
-+
-+/* Power management functions */
-+static void hci_h4p_disable_tx(struct hci_h4p_info *info)
-+{
-+	NBT_DBG_POWER("\n");
-+
-+	if (!info->pm_enabled)
-+		return;
-+
-+	mod_timer(&info->tx_pm_timer, jiffies + msecs_to_jiffies(PM_TIMEOUT));
-+}
-+
-+static void hci_h4p_enable_tx(struct hci_h4p_info *info)
-+{
-+	NBT_DBG_POWER("\n");
-+
-+	if (!info->pm_enabled)
-+		return;
-+
-+	del_timer_sync(&info->tx_pm_timer);
-+	if (info->tx_pm_enabled) {
-+		info->tx_pm_enabled = 0;
-+		hci_h4p_set_clk(info, &info->tx_clocks_en, 1);
-+		gpio_set_value(info->bt_wakeup_gpio, 1);
-+	}
-+}
-+
-+static void hci_h4p_tx_pm_timer(unsigned long data)
-+{
-+	struct hci_h4p_info *info;
-+
-+	NBT_DBG_POWER("\n");
-+
-+	info = (struct hci_h4p_info *)data;
-+
-+	if (hci_h4p_inb(info, UART_LSR) & UART_LSR_TEMT) {
-+		gpio_set_value(info->bt_wakeup_gpio, 0);
-+		hci_h4p_set_clk(info, &info->tx_clocks_en, 0);
-+		info->tx_pm_enabled = 1;
-+	}
-+	else {
-+		mod_timer(&info->tx_pm_timer, jiffies + msecs_to_jiffies(PM_TIMEOUT));
-+	}
-+}
-+
-+static void hci_h4p_disable_rx(struct hci_h4p_info *info)
-+{
-+	if (!info->pm_enabled)
-+		return;
-+
-+	mod_timer(&info->rx_pm_timer, jiffies + msecs_to_jiffies(PM_TIMEOUT));
-+}
-+
-+static void hci_h4p_enable_rx(struct hci_h4p_info *info)
-+{
-+	unsigned long flags;
-+
-+	if (!info->pm_enabled)
-+		return;
-+
-+	del_timer_sync(&info->rx_pm_timer);
-+	spin_lock_irqsave(&info->lock, flags);
-+	if (info->rx_pm_enabled) {
-+		hci_h4p_set_clk(info, &info->rx_clocks_en, 1);
-+		hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) | UART_IER_RDI);
-+		__hci_h4p_set_auto_ctsrts(info, 1, UART_EFR_RTS);
-+		info->rx_pm_enabled = 0;
-+	}
-+	spin_unlock_irqrestore(&info->lock, flags);
-+}
-+
-+static void hci_h4p_rx_pm_timer(unsigned long data)
-+{
-+	unsigned long flags;
-+	struct hci_h4p_info *info = (struct hci_h4p_info *)data;
-+
-+	spin_lock_irqsave(&info->lock, flags);
-+	if (!(hci_h4p_inb(info, UART_LSR) & UART_LSR_DR)) {
-+		__hci_h4p_set_auto_ctsrts(info, 0, UART_EFR_RTS);
-+		hci_h4p_set_rts(info, 0);
-+		hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) & ~UART_IER_RDI);
-+		hci_h4p_set_clk(info, &info->rx_clocks_en, 0);
-+		info->rx_pm_enabled = 1;
-+	}
-+	else {
-+		mod_timer(&info->rx_pm_timer, jiffies + msecs_to_jiffies(PM_TIMEOUT));
-+	}
-+	spin_unlock_irqrestore(&info->lock, flags);
-+}
-+
-+/* Negotiation functions */
-+int hci_h4p_send_alive_packet(struct hci_h4p_info *info)
-+{
-+	NBT_DBG("Sending alive packet\n");
-+
-+	if (!info->alive_cmd_skb)
-+		return -EINVAL;
-+
-+	/* Keep reference to buffer so we can reuse it */
-+	info->alive_cmd_skb = skb_get(info->alive_cmd_skb);
-+
-+	skb_queue_tail(&info->txq, info->alive_cmd_skb);
-+	tasklet_schedule(&info->tx_task);
-+
-+	NBT_DBG("Alive packet sent\n");
-+
-+	return 0;
-+}
-+
-+static void hci_h4p_alive_packet(struct hci_h4p_info *info, struct sk_buff *skb)
-+{
-+	NBT_DBG("Received alive packet\n");
-+	if (skb->data[1] == 0xCC) {
-+		complete(&info->init_completion);
-+	}
-+
-+	kfree_skb(skb);
-+}
-+
-+static int hci_h4p_send_negotiation(struct hci_h4p_info *info, struct sk_buff *skb)
-+{
-+	NBT_DBG("Sending negotiation..\n");
-+
-+	hci_h4p_change_speed(info, INIT_SPEED);
-+
-+	info->init_error = 0;
-+	init_completion(&info->init_completion);
-+	skb_queue_tail(&info->txq, skb);
-+	tasklet_schedule(&info->tx_task);
-+
-+	if (!wait_for_completion_interruptible_timeout(&info->init_completion,
-+				msecs_to_jiffies(1000)))
-+		return -ETIMEDOUT;
-+
-+	NBT_DBG("Negotiation sent\n");
-+	return info->init_error;
-+}
-+
-+static void hci_h4p_negotiation_packet(struct hci_h4p_info *info,
-+				       struct sk_buff *skb)
-+{
-+	int err = 0;
-+
-+	if (skb->data[1] == 0x20) {
-+		/* Change to operational settings */
-+		hci_h4p_set_rts(info, 0);
-+
-+		err = hci_h4p_wait_for_cts(info, 0, 100);
-+		if (err < 0)
-+			goto neg_ret;
-+
-+		hci_h4p_change_speed(info, MAX_BAUD_RATE);
-+
-+		err = hci_h4p_wait_for_cts(info, 1, 100);
-+		if (err < 0)
-+			goto neg_ret;
-+
-+		hci_h4p_set_auto_ctsrts(info, 1, UART_EFR_CTS | UART_EFR_RTS);
-+
-+		err = hci_h4p_send_alive_packet(info);
-+		if (err < 0)
-+			goto neg_ret;
-+	} else {
-+		dev_err(info->dev, "Could not negotiate hci_h4p settings\n");
-+		err = -EINVAL;
-+		goto neg_ret;
-+	}
-+
-+	kfree_skb(skb);
-+	return;
-+
-+neg_ret:
-+	info->init_error = err;
-+	complete(&info->init_completion);
-+	kfree_skb(skb);
-+}
-+
-+/* H4 packet handling functions */
-+static int hci_h4p_get_hdr_len(struct hci_h4p_info *info, u8 pkt_type)
-+{
-+	long retval;
-+
-+	switch (pkt_type) {
-+	case H4_EVT_PKT:
-+		retval = HCI_EVENT_HDR_SIZE;
-+		break;
-+	case H4_ACL_PKT:
-+		retval = HCI_ACL_HDR_SIZE;
-+		break;
-+	case H4_SCO_PKT:
-+		retval = HCI_SCO_HDR_SIZE;
-+		break;
-+	case H4_NEG_PKT:
-+		retval = 11;
-+		break;
-+	case H4_ALIVE_PKT:
-+		retval = 3;
-+		break;
-+	default:
-+		dev_err(info->dev, "Unknown H4 packet type 0x%.2x\n", pkt_type);
-+		retval = -1;
-+		break;
-+	}
-+
-+	return retval;
-+}
-+
-+static unsigned int hci_h4p_get_data_len(struct hci_h4p_info *info,
-+					 struct sk_buff *skb)
-+{
-+	long retval = -1;
-+	struct hci_event_hdr *evt_hdr;
-+	struct hci_acl_hdr *acl_hdr;
-+	struct hci_sco_hdr *sco_hdr;
-+
-+	switch (bt_cb(skb)->pkt_type) {
-+	case H4_EVT_PKT:
-+		evt_hdr = (struct hci_event_hdr *)skb->data;
-+		retval = evt_hdr->plen;
-+		break;
-+	case H4_ACL_PKT:
-+		acl_hdr = (struct hci_acl_hdr *)skb->data;
-+		retval = le16_to_cpu(acl_hdr->dlen);
-+		break;
-+	case H4_SCO_PKT:
-+		sco_hdr = (struct hci_sco_hdr *)skb->data;
-+		retval = sco_hdr->dlen;
-+		break;
-+	case H4_NEG_PKT:
-+		retval = 0;
-+		break;
-+	case H4_ALIVE_PKT:
-+		retval = 0;
-+		break;
-+	}
-+
-+	return retval;
-+}
-+
-+static inline void hci_h4p_recv_frame(struct hci_h4p_info *info,
-+				      struct sk_buff *skb)
-+{
-+
-+	if (unlikely(!test_bit(HCI_RUNNING, &info->hdev->flags))) {
-+		NBT_DBG("fw_event\n");
-+		hci_h4p_parse_fw_event(info, skb);
-+	} else {
-+		hci_recv_frame(skb);
-+		NBT_DBG("Frame sent to upper layer\n");
-+	}
-+}
-+
-+static void hci_h4p_rx_tasklet(unsigned long data)
-+{
-+	u8 byte;
-+	unsigned long flags;
-+	struct hci_h4p_info *info = (struct hci_h4p_info *)data;
-+
-+	NBT_DBG("tasklet woke up\n");
-+	NBT_DBG_TRANSFER("rx_tasklet woke up\ndata ");
-+
-+	while (hci_h4p_inb(info, UART_LSR) & UART_LSR_DR) {
-+		byte = hci_h4p_inb(info, UART_RX);
-+		if (info->garbage_bytes) {
-+			info->garbage_bytes--;
-+			continue;
-+		}
-+		if (info->rx_skb == NULL) {
-+			info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC | GFP_DMA);
-+			if (!info->rx_skb) {
-+				dev_err(info->dev, "Can't allocate memory for new packet\n");
-+				goto finish_task;
-+			}
-+			info->rx_state = WAIT_FOR_PKT_TYPE;
-+			info->rx_skb->dev = (void *)info->hdev;
-+		}
-+		info->hdev->stat.byte_rx++;
-+		NBT_DBG_TRANSFER_NF("0x%.2x  ", byte);
-+		switch (info->rx_state) {
-+		case WAIT_FOR_PKT_TYPE:
-+			bt_cb(info->rx_skb)->pkt_type = byte;
-+			info->rx_count = hci_h4p_get_hdr_len(info, byte);
-+			if (info->rx_count < 0) {
-+				info->hdev->stat.err_rx++;
-+				kfree_skb(info->rx_skb);
-+				info->rx_skb = NULL;
-+			} else {
-+				info->rx_state = WAIT_FOR_HEADER;
-+			}
-+			break;
-+		case WAIT_FOR_HEADER:
-+			info->rx_count--;
-+			*skb_put(info->rx_skb, 1) = byte;
-+			if (info->rx_count == 0) {
-+				info->rx_count = hci_h4p_get_data_len(info, info->rx_skb);
-+				if (info->rx_count > skb_tailroom(info->rx_skb)) {
-+					dev_err(info->dev, "Frame is %ld bytes too long.\n",
-+					       info->rx_count - skb_tailroom(info->rx_skb));
-+					kfree_skb(info->rx_skb);
-+					info->rx_skb = NULL;
-+					info->garbage_bytes = info->rx_count - skb_tailroom(info->rx_skb);
-+					break;
-+				}
-+				info->rx_state = WAIT_FOR_DATA;
-+
-+				if (bt_cb(info->rx_skb)->pkt_type == H4_NEG_PKT) {
-+					hci_h4p_negotiation_packet(info, info->rx_skb);
-+					info->rx_skb = NULL;
-+					info->rx_state = WAIT_FOR_PKT_TYPE;
-+					goto finish_task;
-+				}
-+				if (bt_cb(info->rx_skb)->pkt_type == H4_ALIVE_PKT) {
-+					hci_h4p_alive_packet(info, info->rx_skb);
-+					info->rx_skb = NULL;
-+					info->rx_state = WAIT_FOR_PKT_TYPE;
-+					goto finish_task;
-+				}
-+			}
-+			break;
-+		case WAIT_FOR_DATA:
-+			info->rx_count--;
-+			*skb_put(info->rx_skb, 1) = byte;
-+			if (info->rx_count == 0) {
-+				/* H4+ devices should allways send word aligned packets */
-+				if (!(info->rx_skb->len % 2)) {
-+					info->garbage_bytes++;
-+				}
-+				hci_h4p_recv_frame(info, info->rx_skb);
-+				info->rx_skb = NULL;
-+			}
-+			break;
-+		default:
-+			WARN_ON(1);
-+			break;
-+		}
-+	}
-+
-+finish_task:
-+	spin_lock_irqsave(&info->lock, flags);
-+	hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) | UART_IER_RDI);
-+	spin_unlock_irqrestore(&info->lock, flags);
-+
-+	NBT_DBG_TRANSFER_NF("\n");
-+	NBT_DBG("rx_ended\n");
-+}
-+
-+static void hci_h4p_tx_tasklet(unsigned long data)
-+{
-+	unsigned int sent = 0;
-+	unsigned long flags;
-+	struct sk_buff *skb;
-+	struct hci_h4p_info *info = (struct hci_h4p_info *)data;
-+
-+	NBT_DBG("tasklet woke up\n");
-+	NBT_DBG_TRANSFER("tx_tasklet woke up\n data ");
-+
-+	skb = skb_dequeue(&info->txq);
-+	if (!skb) {
-+		/* No data in buffer */
-+		NBT_DBG("skb ready\n");
-+		hci_h4p_disable_tx(info);
-+		return;
-+	}
-+
-+	/* Copy data to tx fifo */
-+	while (!(hci_h4p_inb(info, UART_OMAP_SSR) & UART_OMAP_SSR_TXFULL) &&
-+	       (sent < skb->len)) {
-+		NBT_DBG_TRANSFER_NF("0x%.2x ", skb->data[sent]);
-+		hci_h4p_outb(info, UART_TX, skb->data[sent]);
-+		sent++;
-+	}
-+
-+	info->hdev->stat.byte_tx += sent;
-+	NBT_DBG_TRANSFER_NF("\n");
-+	if (skb->len == sent) {
-+		kfree_skb(skb);
-+	} else {
-+		skb_pull(skb, sent);
-+		skb_queue_head(&info->txq, skb);
-+	}
-+
-+	spin_lock_irqsave(&info->lock, flags);
-+	hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) | UART_IER_THRI);
-+	spin_unlock_irqrestore(&info->lock, flags);
-+}
-+
-+static irqreturn_t hci_h4p_interrupt(int irq, void *data)
-+{
-+	struct hci_h4p_info *info = (struct hci_h4p_info *)data;
-+	u8 iir, msr;
-+	int ret;
-+	unsigned long flags;
-+
-+	ret = IRQ_NONE;
-+
-+	iir = hci_h4p_inb(info, UART_IIR);
-+	if (iir & UART_IIR_NO_INT) {
-+		dev_err(info->dev, "Interrupt but no reason irq 0x%.2x\n", iir);
-+		return IRQ_HANDLED;
-+	}
-+
-+	NBT_DBG("In interrupt handler iir 0x%.2x\n", iir);
-+
-+	iir &= UART_IIR_ID;
-+
-+	if (iir == UART_IIR_MSI) {
-+		msr = hci_h4p_inb(info, UART_MSR);
-+		ret = IRQ_HANDLED;
-+	}
-+	if (iir == UART_IIR_RLSI) {
-+		hci_h4p_inb(info, UART_RX);
-+		hci_h4p_inb(info, UART_LSR);
-+		ret = IRQ_HANDLED;
-+	}
-+
-+	if (iir == UART_IIR_RDI) {
-+		spin_lock_irqsave(&info->lock, flags);
-+		hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) & ~UART_IER_RDI);
-+		spin_unlock_irqrestore(&info->lock, flags);
-+		tasklet_schedule(&info->rx_task);
-+		ret = IRQ_HANDLED;
-+	}
-+
-+	if (iir == UART_IIR_THRI) {
-+		spin_lock_irqsave(&info->lock, flags);
-+		hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) & ~UART_IER_THRI);
-+		spin_unlock_irqrestore(&info->lock, flags);
-+		tasklet_schedule(&info->tx_task);
-+		ret = IRQ_HANDLED;
-+	}
-+
-+	return ret;
-+}
-+
-+static irqreturn_t hci_h4p_wakeup_interrupt(int irq, void *dev_inst)
-+{
-+	struct hci_h4p_info *info = dev_inst;
-+	int should_wakeup;
-+	struct hci_dev *hdev;
-+
-+	if (!info->hdev)
-+		return IRQ_HANDLED;
-+
-+	hdev = info->hdev;
-+
-+	if (!test_bit(HCI_RUNNING, &hdev->flags))
-+		return IRQ_HANDLED;
-+
-+	should_wakeup = gpio_get_value(info->host_wakeup_gpio);
-+	NBT_DBG_POWER("gpio interrupt %d\n", should_wakeup);
-+	if (should_wakeup) {
-+		hci_h4p_enable_rx(info);
-+	} else {
-+		hci_h4p_disable_rx(info);
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int hci_h4p_reset(struct hci_h4p_info *info)
-+{
-+	int err;
-+
-+	hci_h4p_init_uart(info);
-+	hci_h4p_set_rts(info, 0);
-+
-+	gpio_set_value(info->reset_gpio, 0);
-+	msleep(100);
-+	gpio_set_value(info->bt_wakeup_gpio, 1);
-+	gpio_set_value(info->reset_gpio, 1);
-+	msleep(100);
-+
-+	err = hci_h4p_wait_for_cts(info, 1, 10);
-+	if (err < 0) {
-+		dev_err(info->dev, "No cts from bt chip\n");
-+		return err;
-+	}
-+
-+	hci_h4p_set_rts(info, 1);
-+
-+	return 0;
-+}
-+
-+/* hci callback functions */
-+static int hci_h4p_hci_flush(struct hci_dev *hdev)
-+{
-+	struct hci_h4p_info *info;
-+	info = hdev->driver_data;
-+
-+	skb_queue_purge(&info->txq);
-+
-+	return 0;
-+}
-+
-+static int hci_h4p_hci_open(struct hci_dev *hdev)
-+{
-+	struct hci_h4p_info *info;
-+	int err;
-+	struct sk_buff *neg_cmd_skb;
-+	struct sk_buff_head fw_queue;
-+
-+	info = hdev->driver_data;
-+
-+	if (test_bit(HCI_RUNNING, &hdev->flags))
-+		return 0;
-+
-+	skb_queue_head_init(&fw_queue);
-+	err = hci_h4p_read_fw(info, &fw_queue);
-+	if (err < 0) {
-+		dev_err(info->dev, "Cannot read firmware\n");
-+		return err;
-+	}
-+	neg_cmd_skb = skb_dequeue(&fw_queue);
-+	if (!neg_cmd_skb) {
-+		err = -EPROTO;
-+		goto err_clean;
-+	}
-+	info->alive_cmd_skb = skb_dequeue(&fw_queue);
-+	if (!info->alive_cmd_skb) {
-+		err = -EPROTO;
-+		goto err_clean;
-+	}
-+
-+	hci_h4p_set_clk(info, &info->tx_clocks_en, 1);
-+	hci_h4p_set_clk(info, &info->rx_clocks_en, 1);
-+
-+	tasklet_enable(&info->tx_task);
-+	tasklet_enable(&info->rx_task);
-+	info->rx_state = WAIT_FOR_PKT_TYPE;
-+	info->rx_count = 0;
-+	info->garbage_bytes = 0;
-+	info->rx_skb = NULL;
-+	info->pm_enabled = 0;
-+	init_completion(&info->fw_completion);
-+
-+	err = hci_h4p_reset(info);
-+	if (err < 0)
-+		goto err_clean;
-+
-+	err = hci_h4p_send_negotiation(info, neg_cmd_skb);
-+	neg_cmd_skb = NULL;
-+	if (err < 0)
-+		goto err_clean;
-+
-+	err = hci_h4p_send_fw(info, &fw_queue);
-+	if (err < 0) {
-+		dev_err(info->dev, "Sending firmware failed.\n");
-+		goto err_clean;
-+	}
-+
-+	kfree_skb(info->alive_cmd_skb);
-+	info->alive_cmd_skb = NULL;
-+	info->pm_enabled = 1;
-+	info->tx_pm_enabled = 1;
-+	info->rx_pm_enabled = 0;
-+	set_bit(HCI_RUNNING, &hdev->flags);
-+
-+	NBT_DBG("hci up and running\n");
-+	return 0;
-+
-+err_clean:
-+	hci_h4p_hci_flush(hdev);
-+	tasklet_disable(&info->tx_task);
-+	tasklet_disable(&info->rx_task);
-+	hci_h4p_reset_uart(info);
-+	hci_h4p_set_clk(info, &info->tx_clocks_en, 0);
-+	hci_h4p_set_clk(info, &info->rx_clocks_en, 0);
-+	gpio_set_value(info->reset_gpio, 0);
-+	gpio_set_value(info->bt_wakeup_gpio, 0);
-+	skb_queue_purge(&fw_queue);
-+	kfree_skb(neg_cmd_skb);
-+	neg_cmd_skb = NULL;
-+	kfree_skb(info->alive_cmd_skb);
-+	info->alive_cmd_skb = NULL;
-+	kfree_skb(info->rx_skb);
-+
-+	return err;
-+}
-+
-+static int hci_h4p_hci_close(struct hci_dev *hdev)
-+{
-+	struct hci_h4p_info *info = hdev->driver_data;
-+
-+	if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
-+		return 0;
-+
-+	hci_h4p_hci_flush(hdev);
-+	del_timer_sync(&info->tx_pm_timer);
-+	del_timer_sync(&info->rx_pm_timer);
-+	tasklet_disable(&info->tx_task);
-+	tasklet_disable(&info->rx_task);
-+	hci_h4p_set_clk(info, &info->tx_clocks_en, 1);
-+	hci_h4p_set_clk(info, &info->rx_clocks_en, 1);
-+	hci_h4p_reset_uart(info);
-+	hci_h4p_set_clk(info, &info->tx_clocks_en, 0);
-+	hci_h4p_set_clk(info, &info->rx_clocks_en, 0);
-+	gpio_set_value(info->reset_gpio, 0);
-+	gpio_set_value(info->bt_wakeup_gpio, 0);
-+	kfree_skb(info->rx_skb);
-+
-+	return 0;
-+}
-+
-+static void hci_h4p_hci_destruct(struct hci_dev *hdev)
-+{
-+}
-+
-+static int hci_h4p_hci_send_frame(struct sk_buff *skb)
-+{
-+	struct hci_h4p_info *info;
-+	struct hci_dev *hdev = (struct hci_dev *)skb->dev;
-+	int err = 0;
-+
-+	if (!hdev) {
-+		printk(KERN_WARNING "hci_h4p: Frame for unknown device\n");
-+		return -ENODEV;
-+	}
-+
-+	NBT_DBG("dev %p, skb %p\n", hdev, skb);
-+
-+	info = hdev->driver_data;
-+
-+	if (!test_bit(HCI_RUNNING, &hdev->flags)) {
-+		dev_warn(info->dev, "Frame for non-running device\n");
-+		return -EIO;
-+	}
-+
-+	switch (bt_cb(skb)->pkt_type) {
-+	case HCI_COMMAND_PKT:
-+		hdev->stat.cmd_tx++;
-+		break;
-+	case HCI_ACLDATA_PKT:
-+		hdev->stat.acl_tx++;
-+		break;
-+	case HCI_SCODATA_PKT:
-+		hdev->stat.sco_tx++;
-+		break;
-+	}
-+
-+	/* Push frame type to skb */
-+	*skb_push(skb, 1) = (bt_cb(skb)->pkt_type);
-+	/* We should allways send word aligned data to h4+ devices */
-+	if (skb->len % 2) {
-+		err = skb_pad(skb, 1);
-+	}
-+	if (err)
-+		return err;
-+
-+	hci_h4p_enable_tx(info);
-+	skb_queue_tail(&info->txq, skb);
-+	tasklet_schedule(&info->tx_task);
-+
-+	return 0;
-+}
-+
-+static int hci_h4p_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long arg)
-+{
-+	return -ENOIOCTLCMD;
-+}
-+
-+static int hci_h4p_register_hdev(struct hci_h4p_info *info)
-+{
-+	struct hci_dev *hdev;
-+
-+	/* Initialize and register HCI device */
-+
-+	hdev = hci_alloc_dev();
-+	if (!hdev) {
-+		dev_err(info->dev, "Can't allocate memory for device\n");
-+		return -ENOMEM;
-+	}
-+	info->hdev = hdev;
-+
-+	hdev->dev_type = HCI_UART;
-+	hdev->driver_data = info;
-+
-+	hdev->open = hci_h4p_hci_open;
-+	hdev->close = hci_h4p_hci_close;
-+	hdev->flush = hci_h4p_hci_flush;
-+	hdev->send = hci_h4p_hci_send_frame;
-+	hdev->destruct = hci_h4p_hci_destruct;
-+	hdev->ioctl = hci_h4p_hci_ioctl;
-+
-+	hdev->owner = THIS_MODULE;
-+
-+	if (hci_register_dev(hdev) < 0) {
-+		dev_err(info->dev, "hci_h4p: Can't register HCI device %s.\n", hdev->name);
-+		return -ENODEV;
-+	}
-+
-+	return 0;
-+}
-+
-+static int hci_h4p_probe(struct platform_device *pdev)
-+{
-+	struct omap_bluetooth_config *bt_config;
-+	struct hci_h4p_info *info;
-+	int irq, err;
-+
-+	dev_info(&pdev->dev, "Registering HCI H4P device\n");
-+	info = kzalloc(sizeof(struct hci_h4p_info), GFP_KERNEL);
-+	if (!info)
-+		return -ENOMEM;
-+
-+	info->dev = &pdev->dev;
-+	info->pm_enabled = 0;
-+	info->tx_pm_enabled = 0;
-+	info->rx_pm_enabled = 0;
-+	info->garbage_bytes = 0;
-+	info->tx_clocks_en = 0;
-+	info->rx_clocks_en = 0;
-+	tasklet_init(&info->tx_task, hci_h4p_tx_tasklet, (unsigned long)info);
-+	tasklet_init(&info->rx_task, hci_h4p_rx_tasklet, (unsigned long)info);
-+	/* hci_h4p_hci_open assumes that tasklet is disabled in startup */
-+	tasklet_disable(&info->tx_task);
-+	tasklet_disable(&info->rx_task);
-+	spin_lock_init(&info->lock);
-+	spin_lock_init(&info->clocks_lock);
-+	skb_queue_head_init(&info->txq);
-+	init_timer(&info->tx_pm_timer);
-+	info->tx_pm_timer.function = hci_h4p_tx_pm_timer;
-+	info->tx_pm_timer.data = (unsigned long)info;
-+	init_timer(&info->rx_pm_timer);
-+	info->rx_pm_timer.function = hci_h4p_rx_pm_timer;
-+	info->rx_pm_timer.data = (unsigned long)info;
-+
-+	if (pdev->dev.platform_data == NULL) {
-+		dev_err(&pdev->dev, "Could not get Bluetooth config data\n");
-+		return -ENODATA;
-+	}
-+
-+	bt_config = pdev->dev.platform_data;
-+	info->chip_type = bt_config->chip_type;
-+	info->bt_wakeup_gpio = bt_config->bt_wakeup_gpio;
-+	info->host_wakeup_gpio = bt_config->host_wakeup_gpio;
-+	info->reset_gpio = bt_config->reset_gpio;
-+	info->bt_sysclk = bt_config->bt_sysclk;
-+
-+	NBT_DBG("RESET gpio: %d\n", info->reset_gpio);
-+	NBT_DBG("BTWU gpio: %d\n", info->bt_wakeup_gpio);
-+	NBT_DBG("HOSTWU gpio: %d\n", info->host_wakeup_gpio);
-+	NBT_DBG("Uart: %d\n", bt_config->bt_uart);
-+	NBT_DBG("sysclk: %d\n", info->bt_sysclk);
-+
-+	err = gpio_request(info->reset_gpio, "BT reset");
-+	if (err < 0) {
-+		dev_err(&pdev->dev, "Cannot get GPIO line %d\n",
-+			info->reset_gpio);
-+		kfree(info);
-+		goto cleanup;
-+	}
-+
-+	err = gpio_request(info->bt_wakeup_gpio, "BT wakeup");
-+	if (err < 0)
-+	{
-+		dev_err(info->dev, "Cannot get GPIO line 0x%d",
-+			info->bt_wakeup_gpio);
-+		gpio_free(info->reset_gpio);
-+		kfree(info);
-+		goto cleanup;
-+	}
-+
-+	err = gpio_request(info->host_wakeup_gpio, "BT host wakeup");
-+	if (err < 0)
-+	{
-+		dev_err(info->dev, "Cannot get GPIO line %d",
-+		       info->host_wakeup_gpio);
-+		gpio_free(info->reset_gpio);
-+		gpio_free(info->bt_wakeup_gpio);
-+		kfree(info);
-+		goto cleanup;
-+	}
-+
-+	gpio_direction_output(info->reset_gpio, 0);
-+	gpio_direction_output(info->bt_wakeup_gpio, 0);
-+	gpio_direction_input(info->host_wakeup_gpio);
-+
-+//FIXME
-+#if defined(CONFIG_ARCH_OMAP1)
-+# define OMAP_UART1_BASE	OMAP1_UART1_BASE
-+# define OMAP_UART2_BASE	OMAP1_UART2_BASE
-+# define OMAP_UART3_BASE	OMAP1_UART3_BASE
-+#elif defined(CONFIG_ARCH_OMAP2)
-+# define OMAP_UART1_BASE	OMAP2_UART1_BASE
-+# define OMAP_UART2_BASE	OMAP2_UART2_BASE
-+# define OMAP_UART3_BASE	OMAP2_UART3_BASE
-+#elif defined(CONFIG_ARCH_OMAP3)
-+# define OMAP_UART1_BASE	OMAP3_UART1_BASE
-+# define OMAP_UART2_BASE	OMAP3_UART2_BASE
-+# define OMAP_UART3_BASE	OMAP3_UART3_BASE
-+#elif defined(CONFIG_ARCH_OMAP4)
-+# define OMAP_UART1_BASE	OMAP4_UART1_BASE
-+# define OMAP_UART2_BASE	OMAP4_UART2_BASE
-+# define OMAP_UART3_BASE	OMAP4_UART3_BASE
-+#else
-+# error
-+#endif
-+	switch (bt_config->bt_uart) {
-+	case 1:
-+		if (cpu_is_omap16xx()) {
-+			irq = INT_UART1;
-+			info->uart_fclk = clk_get(NULL, "uart1_ck");
-+		} else if (cpu_is_omap24xx()) {
-+			irq = INT_24XX_UART1_IRQ;
-+			info->uart_iclk = clk_get(NULL, "uart1_ick");
-+			info->uart_fclk = clk_get(NULL, "uart1_fck");
-+		}
-+		/* FIXME: Use platform_get_resource for the port */
-+		info->uart_base = ioremap(OMAP_UART1_BASE, 0x16);
-+		if (!info->uart_base)
-+			goto cleanup;
-+		break;
-+	case 2:
-+		if (cpu_is_omap16xx()) {
-+			irq = INT_UART2;
-+			info->uart_fclk = clk_get(NULL, "uart2_ck");
-+		} else {
-+			irq = INT_24XX_UART2_IRQ;
-+			info->uart_iclk = clk_get(NULL, "uart2_ick");
-+			info->uart_fclk = clk_get(NULL, "uart2_fck");
-+		}
-+		/* FIXME: Use platform_get_resource for the port */
-+		info->uart_base = ioremap(OMAP_UART2_BASE, 0x16);
-+		if (!info->uart_base)
-+			goto cleanup;
-+		break;
-+	case 3:
-+		if (cpu_is_omap16xx()) {
-+			irq = INT_UART3;
-+			info->uart_fclk = clk_get(NULL, "uart3_ck");
-+		} else {
-+			irq = INT_24XX_UART3_IRQ;
-+			info->uart_iclk = clk_get(NULL, "uart3_ick");
-+			info->uart_fclk = clk_get(NULL, "uart3_fck");
-+		}
-+		/* FIXME: Use platform_get_resource for the port */
-+		info->uart_base = ioremap(OMAP_UART3_BASE, 0x16);
-+		if (!info->uart_base)
-+			goto cleanup;
-+		break;
-+	default:
-+		dev_err(info->dev, "No uart defined\n");
-+		goto cleanup;
-+	}
-+
-+	info->irq = irq;
-+	err = request_irq(irq, hci_h4p_interrupt, 0, "hci_h4p", (void *)info);
-+	if (err < 0) {
-+		dev_err(info->dev, "hci_h4p: unable to get IRQ %d\n", irq);
-+		goto cleanup;
-+	}
-+
-+	err = request_irq(gpio_to_irq(info->host_wakeup_gpio),
-+			  hci_h4p_wakeup_interrupt,
-+				IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-+			  "hci_h4p_wkup", (void *)info);
-+	if (err < 0) {
-+		dev_err(info->dev, "hci_h4p: unable to get wakeup IRQ %d\n",
-+			  gpio_to_irq(info->host_wakeup_gpio));
-+		free_irq(irq, (void *)info);
-+		goto cleanup;
-+	}
-+
-+	hci_h4p_set_clk(info, &info->tx_clocks_en, 1);
-+	hci_h4p_set_auto_ctsrts(info, 0, UART_EFR_CTS | UART_EFR_RTS);
-+	err = hci_h4p_init_uart(info);
-+	if (err < 0)
-+		goto cleanup_irq;
-+	err = hci_h4p_reset(info);
-+	if (err < 0)
-+		goto cleanup_irq;
-+	err = hci_h4p_wait_for_cts(info, 1, 10);
-+	if (err < 0)
-+		goto cleanup_irq;
-+	hci_h4p_set_clk(info, &info->tx_clocks_en, 0);
-+
-+	platform_set_drvdata(pdev, info);
-+	err = hci_h4p_sysfs_create_files(info->dev);
-+	if (err < 0)
-+		goto cleanup_irq;
-+
-+	if (hci_h4p_register_hdev(info) < 0) {
-+		dev_err(info->dev, "failed to register hci_h4p hci device\n");
-+		goto cleanup_irq;
-+	}
-+	gpio_set_value(info->reset_gpio, 0);
-+
-+	return 0;
-+
-+cleanup_irq:
-+	free_irq(irq, (void *)info);
-+	free_irq(gpio_to_irq(info->host_wakeup_gpio), (void *)info);
-+cleanup:
-+	gpio_set_value(info->reset_gpio, 0);
-+	gpio_free(info->reset_gpio);
-+	gpio_free(info->bt_wakeup_gpio);
-+	gpio_free(info->host_wakeup_gpio);
-+	kfree(info);
-+
-+	return err;
-+
-+}
-+
-+static int hci_h4p_remove(struct platform_device *dev)
-+{
-+	struct hci_h4p_info *info;
-+
-+	info = platform_get_drvdata(dev);
-+
-+	hci_h4p_hci_close(info->hdev);
-+	free_irq(gpio_to_irq(info->host_wakeup_gpio), (void *) info);
-+	hci_free_dev(info->hdev);
-+	gpio_free(info->reset_gpio);
-+	gpio_free(info->bt_wakeup_gpio);
-+	gpio_free(info->host_wakeup_gpio);
-+	free_irq(info->irq, (void *) info);
-+	kfree(info);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver hci_h4p_driver = {
-+	.probe		= hci_h4p_probe,
-+	.remove		= hci_h4p_remove,
-+	.driver		= {
-+		.name	= "hci_h4p",
-+	},
-+};
-+
-+static int __init hci_h4p_init(void)
-+{
-+	int err = 0;
-+
-+	/* Register the driver with LDM */
-+	err = platform_driver_register(&hci_h4p_driver);
-+	if (err < 0)
-+		printk(KERN_WARNING "failed to register hci_h4p driver\n");
-+
-+	return err;
-+}
-+
-+static void __exit hci_h4p_exit(void)
-+{
-+	platform_driver_unregister(&hci_h4p_driver);
-+}
-+
-+module_init(hci_h4p_init);
-+module_exit(hci_h4p_exit);
-+
-+MODULE_DESCRIPTION("h4 driver with nokia extensions");
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Ville Tervo");
---- /dev/null
-+++ b/drivers/bluetooth/hci_h4p/fw.c
-@@ -0,0 +1,155 @@
-+/*
-+ * This file is part of hci_h4p bluetooth driver
-+ *
-+ * Copyright (C) 2005, 2006 Nokia Corporation.
-+ *
-+ * Contact: Ville Tervo <ville.tervo@nokia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-+ * 02110-1301 USA
-+ *
-+ */
-+
-+#include <linux/skbuff.h>
-+#include <linux/firmware.h>
-+#include <linux/clk.h>
-+
-+#include <net/bluetooth/bluetooth.h>
-+
-+#include "hci_h4p.h"
-+
-+#define BT_CHIP_TI	2
-+#define BT_CHIP_CSR	1
-+
-+static int fw_pos;
-+
-+/* Firmware handling */
-+static int hci_h4p_open_firmware(struct hci_h4p_info *info,
-+				 const struct firmware **fw_entry)
-+{
-+	int err;
-+
-+	fw_pos = 0;
-+	NBT_DBG_FW("Opening %d firmware\n", info->chip_type);
-+	switch (info->chip_type) {
-+	case BT_CHIP_TI:
-+		err = request_firmware(fw_entry, "brf6150fw.bin", info->dev);
-+		break;
-+	case BT_CHIP_CSR:
-+		err = request_firmware(fw_entry, "bc4fw.bin", info->dev);
-+		break;
-+	default:
-+		dev_err(info->dev, "Invalid chip type\n");
-+		*fw_entry = NULL;
-+		err = -EINVAL;
-+	}
-+
-+	return err;
-+}
-+
-+static void hci_h4p_close_firmware(const struct firmware *fw_entry)
-+{
-+	release_firmware(fw_entry);
-+}
-+
-+/* Read fw. Return length of the command. If no more commands in
-+ * fw 0 is returned. In error case return value is negative.
-+ */
-+static int hci_h4p_read_fw_cmd(struct hci_h4p_info *info, struct sk_buff **skb,
-+			       const struct firmware *fw_entry, int how)
-+{
-+	unsigned int cmd_len;
-+
-+	if (fw_pos >= fw_entry->size) {
-+		return 0;
-+	}
-+
-+	cmd_len = fw_entry->data[fw_pos++];
-+	if (!cmd_len)
-+		return 0;
-+
-+	if (fw_pos + cmd_len > fw_entry->size) {
-+		dev_err(info->dev, "Corrupted firmware image\n");
-+		return -EMSGSIZE;
-+	}
-+
-+	*skb = bt_skb_alloc(cmd_len, how);
-+	if (!*skb) {
-+		dev_err(info->dev, "Cannot reserve memory for buffer\n");
-+		return -ENOMEM;
-+	}
-+	memcpy(skb_put(*skb, cmd_len), &fw_entry->data[fw_pos], cmd_len);
-+
-+	fw_pos += cmd_len;
-+
-+	return (*skb)->len;
-+}
-+
-+int hci_h4p_read_fw(struct hci_h4p_info *info, struct sk_buff_head *fw_queue)
-+{
-+	const struct firmware *fw_entry = NULL;
-+	struct sk_buff *skb = NULL;
-+	int err;
-+
-+	err = hci_h4p_open_firmware(info, &fw_entry);
-+	if (err < 0 || !fw_entry)
-+		goto err_clean;
-+
-+	while ((err = hci_h4p_read_fw_cmd(info, &skb, fw_entry, GFP_KERNEL))) {
-+		if (err < 0 || !skb)
-+			goto err_clean;
-+
-+		skb_queue_tail(fw_queue, skb);
-+	}
-+
-+err_clean:
-+	hci_h4p_close_firmware(fw_entry);
-+	return err;
-+}
-+
-+int hci_h4p_send_fw(struct hci_h4p_info *info, struct sk_buff_head *fw_queue)
-+{
-+	int err;
-+
-+	switch(info->chip_type) {
-+	case BT_CHIP_CSR:
-+		err = hci_h4p_bc4_send_fw(info, fw_queue);
-+		break;
-+	case BT_CHIP_TI:
-+		err = hci_h4p_brf6150_send_fw(info, fw_queue);
-+		break;
-+	default:
-+		dev_err(info->dev, "Don't know how to send firmware\n");
-+		err = -EINVAL;
-+	}
-+
-+	return err;
-+}
-+
-+void hci_h4p_parse_fw_event(struct hci_h4p_info *info, struct sk_buff *skb)
-+{
-+	switch (info->chip_type) {
-+	case BT_CHIP_CSR:
-+		hci_h4p_bc4_parse_fw_event(info, skb);
-+		break;
-+	case BT_CHIP_TI:
-+		hci_h4p_brf6150_parse_fw_event(info, skb);
-+		break;
-+	default:
-+		dev_err(info->dev, "Don't know how to parse fw event\n");
-+		info->fw_error = -EINVAL;
-+	}
-+
-+	return;
-+}
---- /dev/null
-+++ b/drivers/bluetooth/hci_h4p/fw-csr.c
-@@ -0,0 +1,149 @@
-+/*
-+ * This file is part of hci_h4p bluetooth driver
-+ *
-+ * Copyright (C) 2005, 2006 Nokia Corporation.
-+ *
-+ * Contact: Ville Tervo <ville.tervo@nokia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-+ * 02110-1301 USA
-+ *
-+ */
-+
-+#include <linux/skbuff.h>
-+#include <linux/delay.h>
-+#include <linux/serial_reg.h>
-+
-+#include "hci_h4p.h"
-+
-+void hci_h4p_bc4_parse_fw_event(struct hci_h4p_info *info, struct sk_buff *skb)
-+{
-+	/* Check if this is fw packet */
-+	if (skb->data[0] != 0xff) {
-+		hci_recv_frame(skb);
-+		return;
-+	}
-+
-+	if (skb->data[11] || skb->data[12]) {
-+		dev_err(info->dev, "Firmware sending command failed\n");
-+		info->fw_error = -EPROTO;
-+	}
-+
-+	kfree_skb(skb);
-+	complete(&info->fw_completion);
-+}
-+
-+int hci_h4p_bc4_send_fw(struct hci_h4p_info *info,
-+			struct sk_buff_head *fw_queue)
-+{
-+	struct sk_buff *skb;
-+	unsigned int offset;
-+	int retries, count, i;
-+
-+	info->fw_error = 0;
-+
-+	NBT_DBG_FW("Sending firmware\n");
-+	skb = skb_dequeue(fw_queue);
-+
-+	if (!skb)
-+		return -ENOMSG;
-+
-+	info->bdaddr[0] = 0x00;
-+	info->bdaddr[1] = 0x1D;
-+	info->bdaddr[2] = 0x6E;
-+	info->bdaddr[3] = 0xD4;
-+	info->bdaddr[4] = 0xF0;
-+	info->bdaddr[5] = 0x37;
-+
-+	/* Check if this is bd_address packet */
-+	if (skb->data[15] == 0x01 && skb->data[16] == 0x00) {
-+		dev_info(info->dev, "bd_address packet found\n");
-+		offset = 21;
-+		skb->data[offset + 1] = 0x00;
-+		skb->data[offset + 5] = 0x00;
-+		skb->data[offset + 7] = info->bdaddr[0];
-+		skb->data[offset + 6] = info->bdaddr[1];
-+		skb->data[offset + 4] = info->bdaddr[2];
-+		skb->data[offset + 0] = info->bdaddr[3];
-+		skb->data[offset + 3] = info->bdaddr[4];
-+		skb->data[offset + 2] = info->bdaddr[5];
-+	}
-+
-+	for (i = 0; i < 6; i++) {
-+		if (info->bdaddr[i] != 0x00)
-+			break;
-+	}
-+
-+	/* if (i > 5) {
-+		dev_info(info->dev, "Valid bluetooth address not found.\n");
-+		kfree_skb(skb);
-+		return -ENODEV;
-+	} */
-+
-+	for (count = 1; ; count++) {
-+		NBT_DBG_FW("Sending firmware command %d\n", count);
-+		init_completion(&info->fw_completion);
-+		skb_queue_tail(&info->txq, skb);
-+		tasklet_schedule(&info->tx_task);
-+
-+		skb = skb_dequeue(fw_queue);
-+		if (!skb)
-+			break;
-+
-+		if (!wait_for_completion_timeout(&info->fw_completion,
-+						 msecs_to_jiffies(1000))) {
-+			dev_err(info->dev, "No reply to fw command\n");
-+			return -ETIMEDOUT;
-+		}
-+
-+		if (info->fw_error) {
-+			dev_err(info->dev, "FW error\n");
-+			return -EPROTO;
-+		}
-+	};
-+
-+	/* Wait for chip warm reset */
-+	retries = 100;
-+	while ((!skb_queue_empty(&info->txq) ||
-+	       !(hci_h4p_inb(info, UART_LSR) & UART_LSR_TEMT)) &&
-+	       retries--) {
-+		msleep(10);
-+	}
-+	if (!retries) {
-+		dev_err(info->dev, "Transmitter not empty\n");
-+		return -ETIMEDOUT;
-+	}
-+
-+	hci_h4p_change_speed(info, BC4_MAX_BAUD_RATE);
-+
-+	if (hci_h4p_wait_for_cts(info, 1, 100)) {
-+		dev_err(info->dev, "cts didn't go down after final speed change\n");
-+		return -ETIMEDOUT;
-+	}
-+
-+	retries = 100;
-+	do {
-+		init_completion(&info->init_completion);
-+		hci_h4p_send_alive_packet(info);
-+		retries--;
-+	} while (!wait_for_completion_timeout(&info->init_completion, 100) &&
-+		 retries > 0);
-+
-+	if (!retries) {
-+		dev_err(info->dev, "No alive reply after speed change\n");
-+		return -ETIMEDOUT;
-+	}
-+
-+	return 0;
-+}
---- /dev/null
-+++ b/drivers/bluetooth/hci_h4p/fw-ti.c
-@@ -0,0 +1,90 @@
-+/*
-+ * This file is part of hci_h4p bluetooth driver
-+ *
-+ * Copyright (C) 2005, 2006 Nokia Corporation.
-+ *
-+ * Contact: Ville Tervo <ville.tervo@nokia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-+ * 02110-1301 USA
-+ *
-+ */
-+
-+#include <linux/skbuff.h>
-+
-+#include "hci_h4p.h"
-+
-+void hci_h4p_brf6150_parse_fw_event(struct hci_h4p_info *info,
-+				    struct sk_buff *skb)
-+{
-+	struct hci_fw_event *ev;
-+	int err = 0;
-+
-+	if (bt_cb(skb)->pkt_type != H4_EVT_PKT) {
-+		dev_err(info->dev, "Got non event fw packet.\n");
-+		err = -EPROTO;
-+		goto ret;
-+	}
-+
-+	ev = (struct hci_fw_event *)skb->data;
-+	if (ev->hev.evt != HCI_EV_CMD_COMPLETE) {
-+		dev_err(info->dev, "Got non cmd complete fw event\n");
-+		err = -EPROTO;
-+		goto ret;
-+	}
-+
-+	if (ev->status != 0) {
-+		dev_err(info->dev, "Got error status from fw command\n");
-+		err = -EPROTO;
-+		goto ret;
-+	}
-+
-+ret:
-+	info->fw_error = err;
-+	complete(&info->fw_completion);
-+}
-+
-+int hci_h4p_brf6150_send_fw(struct hci_h4p_info *info, struct sk_buff_head *fw_queue)
-+{
-+	struct sk_buff *skb;
-+	int err = 0;
-+
-+	info->fw_error = 0;
-+
-+	while ((skb = skb_dequeue(fw_queue)) != NULL) {
-+		/* We should allways send word aligned data to h4+ devices */
-+		if (skb->len % 2) {
-+			err = skb_pad(skb, 1);
-+		}
-+		if (err)
-+			return err;
-+
-+		init_completion(&info->fw_completion);
-+		skb_queue_tail(&info->txq, skb);
-+		tasklet_schedule(&info->tx_task);
-+
-+		if (!wait_for_completion_timeout(&info->fw_completion, HZ)) {
-+			dev_err(info->dev, "Timeout while sending brf6150 fw\n");
-+			return -ETIMEDOUT;
-+		}
-+
-+		if (info->fw_error) {
-+			dev_err(info->dev, "There was fw_error while sending bfr6150 fw\n");
-+			return -EPROTO;
-+		}
-+	}
-+	NBT_DBG_FW("Firmware sent\n");
-+
-+	return 0;
-+}
---- /dev/null
-+++ b/drivers/bluetooth/hci_h4p/hci_h4p.h
-@@ -0,0 +1,183 @@
-+/*
-+ * This file is part of hci_h4p bluetooth driver
-+ *
-+ * Copyright (C) 2005, 2006 Nokia Corporation.
-+ *
-+ * Contact: Ville Tervo <ville.tervo@nokia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-+ * 02110-1301 USA
-+ *
-+ */
-+
-+#include <mach/board.h>
-+
-+#include <net/bluetooth/bluetooth.h>
-+#include <net/bluetooth/hci_core.h>
-+#include <net/bluetooth/hci.h>
-+
-+#ifndef __DRIVERS_BLUETOOTH_HCI_H4P_H
-+#define __DRIVERS_BLUETOOTH_HCI_H4P_H
-+
-+#define UART_SYSC_OMAP_RESET	0x03
-+#define UART_SYSS_RESETDONE	0x01
-+#define UART_OMAP_SCR_EMPTY_THR	0x08
-+#define UART_OMAP_SCR_WAKEUP	0x10
-+#define UART_OMAP_SSR_WAKEUP	0x02
-+#define UART_OMAP_SSR_TXFULL	0x01
-+
-+#if 0
-+#define NBT_DBG(fmt, arg...)  printk("%s: " fmt "" , __FUNCTION__ , ## arg)
-+#else
-+#define NBT_DBG(...)
-+#endif
-+
-+#if 0
-+#define NBT_DBG_FW(fmt, arg...)  printk("%s: " fmt "" , __FUNCTION__ , ## arg)
-+#else
-+#define NBT_DBG_FW(...)
-+#endif
-+
-+#if 0
-+#define NBT_DBG_POWER(fmt, arg...)  printk("%s: " fmt "" , __FUNCTION__ , ## arg)
-+#else
-+#define NBT_DBG_POWER(...)
-+#endif
-+
-+#if 0
-+#define NBT_DBG_TRANSFER(fmt, arg...)  printk("%s: " fmt "" , __FUNCTION__ , ## arg)
-+#else
-+#define NBT_DBG_TRANSFER(...)
-+#endif
-+
-+#if 0
-+#define NBT_DBG_TRANSFER_NF(fmt, arg...)  printk(fmt "" , ## arg)
-+#else
-+#define NBT_DBG_TRANSFER_NF(...)
-+#endif
-+
-+#if 0
-+#define NBT_DBG_DMA(fmt, arg...)  printk("%s: " fmt "" , __FUNCTION__ , ## arg)
-+#else
-+#define NBT_DBG_DMA(...)
-+#endif
-+
-+struct hci_h4p_info {
-+	struct hci_dev *hdev;
-+	spinlock_t lock;
-+
-+	void __iomem *uart_base;
-+	unsigned long uart_phys_base;
-+	int irq;
-+	struct device *dev;
-+	u8 bdaddr[6];
-+	u8 chip_type;
-+	u8 bt_wakeup_gpio;
-+	u8 host_wakeup_gpio;
-+	u8 reset_gpio;
-+	u8 bt_sysclk;
-+
-+
-+	struct sk_buff_head fw_queue;
-+	struct sk_buff *alive_cmd_skb;
-+	struct completion init_completion;
-+	struct completion fw_completion;
-+	int fw_error;
-+	int init_error;
-+
-+	struct sk_buff_head txq;
-+	struct tasklet_struct tx_task;
-+
-+	struct sk_buff *rx_skb;
-+	long rx_count;
-+	unsigned long rx_state;
-+	unsigned long garbage_bytes;
-+	struct tasklet_struct rx_task;
-+
-+	int pm_enabled;
-+	int tx_pm_enabled;
-+	int rx_pm_enabled;
-+	struct timer_list tx_pm_timer;
-+	struct timer_list rx_pm_timer;
-+
-+	int tx_clocks_en;
-+	int rx_clocks_en;
-+	spinlock_t clocks_lock;
-+	struct clk *uart_iclk;
-+	struct clk *uart_fclk;
-+};
-+
-+#define MAX_BAUD_RATE		921600
-+#define BC4_MAX_BAUD_RATE	3692300
-+#define UART_CLOCK		48000000
-+#define BT_INIT_DIVIDER		320
-+#define BT_BAUDRATE_DIVIDER	384000000
-+#define BT_SYSCLK_DIV		1000
-+#define INIT_SPEED		120000
-+
-+#define H4_TYPE_SIZE		1
-+
-+/* H4+ packet types */
-+#define H4_CMD_PKT		0x01
-+#define H4_ACL_PKT		0x02
-+#define H4_SCO_PKT		0x03
-+#define H4_EVT_PKT		0x04
-+#define H4_NEG_PKT		0x06
-+#define H4_ALIVE_PKT		0x07
-+
-+/* TX states */
-+#define WAIT_FOR_PKT_TYPE	1
-+#define WAIT_FOR_HEADER		2
-+#define WAIT_FOR_DATA		3
-+
-+struct hci_fw_event {
-+	struct hci_event_hdr hev;
-+	struct hci_ev_cmd_complete cmd;
-+	u8 status;
-+} __attribute__ ((packed));
-+
-+struct hci_bc4_set_bdaddr {
-+	u8 type;
-+	struct hci_command_hdr cmd_hdr;
-+} __attribute__ ((packed));
-+
-+int hci_h4p_send_alive_packet(struct hci_h4p_info *info);
-+
-+void hci_h4p_bc4_parse_fw_event(struct hci_h4p_info *info,
-+				struct sk_buff *skb);
-+int hci_h4p_bc4_send_fw(struct hci_h4p_info *info,
-+			struct sk_buff_head *fw_queue);
-+
-+void hci_h4p_brf6150_parse_fw_event(struct hci_h4p_info *info,
-+				    struct sk_buff *skb);
-+int hci_h4p_brf6150_send_fw(struct hci_h4p_info *info,
-+			    struct sk_buff_head *fw_queue);
-+
-+int hci_h4p_read_fw(struct hci_h4p_info *info, struct sk_buff_head *fw_queue);
-+int hci_h4p_send_fw(struct hci_h4p_info *info, struct sk_buff_head *fw_queue);
-+void hci_h4p_parse_fw_event(struct hci_h4p_info *info, struct sk_buff *skb);
-+
-+int hci_h4p_sysfs_create_files(struct device *dev);
-+
-+void hci_h4p_outb(struct hci_h4p_info *info, unsigned int offset, u8 val);
-+u8 hci_h4p_inb(struct hci_h4p_info *info, unsigned int offset);
-+void hci_h4p_set_rts(struct hci_h4p_info *info, int active);
-+int hci_h4p_wait_for_cts(struct hci_h4p_info *info, int active, int timeout_ms);
-+void __hci_h4p_set_auto_ctsrts(struct hci_h4p_info *info, int on, u8 which);
-+void hci_h4p_set_auto_ctsrts(struct hci_h4p_info *info, int on, u8 which);
-+void hci_h4p_change_speed(struct hci_h4p_info *info, unsigned long speed);
-+int hci_h4p_reset_uart(struct hci_h4p_info *info);
-+int hci_h4p_init_uart(struct hci_h4p_info *info);
-+
-+#endif /* __DRIVERS_BLUETOOTH_HCI_H4P_H */
---- /dev/null
-+++ b/drivers/bluetooth/hci_h4p/Makefile
-@@ -0,0 +1,7 @@
-+#
-+# Makefile for the Linux Bluetooth HCI device drivers.
-+#
-+
-+obj-$(CONFIG_BT_HCIH4P)		+= hci_h4p.o
-+
-+hci_h4p-objs := core.o fw.o uart.o sysfs.o fw-ti.o fw-csr.o
---- /dev/null
-+++ b/drivers/bluetooth/hci_h4p/sysfs.c
-@@ -0,0 +1,84 @@
-+/*
-+ * This file is part of hci_h4p bluetooth driver
-+ *
-+ * Copyright (C) 2005, 2006 Nokia Corporation.
-+ *
-+ * Contact: Ville Tervo <ville.tervo@nokia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-+ * 02110-1301 USA
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+
-+#include "hci_h4p.h"
-+
-+#ifdef CONFIG_SYSFS
-+
-+static ssize_t hci_h4p_store_bdaddr(struct device *dev, struct device_attribute *attr,
-+				    const char *buf, size_t count)
-+{
-+	struct hci_h4p_info *info = (struct hci_h4p_info*)dev_get_drvdata(dev);
-+	unsigned int bdaddr[6];
-+	int ret, i;
-+
-+	dev_info(info->dev, "HCI_H4P_STORE_BDADDR called\n");
-+
-+	ret = sscanf(buf, "%2x:%2x:%2x:%2x:%2x:%2x\n",
-+			&bdaddr[0], &bdaddr[1], &bdaddr[2],
-+			&bdaddr[3], &bdaddr[4], &bdaddr[5]);
-+
-+	if (ret != 6) {
-+		dev_info(info->dev, "bdaddr isn't found\n");
-+		return -EINVAL;
-+	}
-+
-+	//for (i = 0; i < 6; i++)
-+		//info->bdaddr[i] = bdaddr[i] & 0xff;
-+
-+	info->bdaddr[0] = 0x00;
-+	info->bdaddr[1] = 0x1D;
-+	info->bdaddr[2] = 0x6E;
-+	info->bdaddr[3] = 0xD4;
-+	info->bdaddr[4] = 0xF0;
-+	info->bdaddr[5] = 0x37;
-+
-+	return count;
-+}
-+
-+static ssize_t hci_h4p_show_bdaddr(struct device *dev, struct device_attribute *attr,
-+				   char *buf)
-+{
-+	struct hci_h4p_info *info = (struct hci_h4p_info*)dev_get_drvdata(dev);
-+
-+	return sprintf(buf, "%.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
-+		       info->bdaddr[0],
-+		       info->bdaddr[1],
-+		       info->bdaddr[2],
-+		       info->bdaddr[3],
-+		       info->bdaddr[4],
-+		       info->bdaddr[5]);
-+}
-+
-+static DEVICE_ATTR(bdaddr, S_IRUGO | S_IWUSR, hci_h4p_show_bdaddr, hci_h4p_store_bdaddr);
-+int hci_h4p_sysfs_create_files(struct device *dev)
-+{
-+	return device_create_file(dev, &dev_attr_bdaddr);
-+}
-+
-+#endif
---- /dev/null
-+++ b/drivers/bluetooth/hci_h4p/uart.c
-@@ -0,0 +1,169 @@
-+/*
-+ * This file is part of hci_h4p bluetooth driver
-+ *
-+ * Copyright (C) 2005, 2006 Nokia Corporation.
-+ *
-+ * Contact: Ville Tervo <ville.tervo@nokia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-+ * 02110-1301 USA
-+ *
-+ */
-+
-+#include <linux/serial_reg.h>
-+#include <linux/delay.h>
-+#include <linux/clk.h>
-+
-+#include <asm/io.h>
-+
-+#include "hci_h4p.h"
-+
-+inline void hci_h4p_outb(struct hci_h4p_info *info, unsigned int offset, u8 val)
-+{
-+	offset <<= 2;
-+	__raw_writeb(val, info->uart_base + offset);
-+	//outb(val, info->uart_base + (offset << 2));
-+}
-+
-+inline u8 hci_h4p_inb(struct hci_h4p_info *info, unsigned int offset)
-+{
-+	offset <<= 2;
-+	return (u8)__raw_readb(info->uart_base + offset);
-+	//return (unsigned int)__raw_readb(up->membase + offset);
-+	//return inb(info->uart_base + (offset << 2));
-+}
-+
-+void hci_h4p_set_rts(struct hci_h4p_info *info, int active)
-+{
-+	u8 b;
-+
-+	b = hci_h4p_inb(info, UART_MCR);
-+	if (active)
-+		b |= UART_MCR_RTS;
-+	else
-+		b &= ~UART_MCR_RTS;
-+	hci_h4p_outb(info, UART_MCR, b);
-+}
-+
-+int hci_h4p_wait_for_cts(struct hci_h4p_info *info, int active,
-+			 int timeout_ms)
-+{
-+	int okay;
-+	unsigned long timeout;
-+
-+	okay = 0;
-+	timeout = jiffies + msecs_to_jiffies(timeout_ms);
-+	for (;;) {
-+		int state;
-+
-+		state = hci_h4p_inb(info, UART_MSR) & UART_MSR_CTS;
-+		if (active) {
-+			if (state)
-+				return 0;
-+		} else {
-+			if (!state)
-+				return 0;
-+		}
-+		if (time_after(jiffies, timeout))
-+			return -ETIMEDOUT;
-+	}
-+}
-+
-+void __hci_h4p_set_auto_ctsrts(struct hci_h4p_info *info, int on, u8 which)
-+{
-+	u8 lcr, b;
-+
-+	lcr = hci_h4p_inb(info, UART_LCR);
-+	hci_h4p_outb(info, UART_LCR, 0xbf);
-+	b = hci_h4p_inb(info, UART_EFR);
-+	if (on)
-+		b |= which;
-+	else
-+		b &= ~which;
-+	hci_h4p_outb(info, UART_EFR, b);
-+	hci_h4p_outb(info, UART_LCR, lcr);
-+}
-+
-+void hci_h4p_set_auto_ctsrts(struct hci_h4p_info *info, int on, u8 which)
-+{
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&info->lock, flags);
-+	__hci_h4p_set_auto_ctsrts(info, on, which);
-+	spin_unlock_irqrestore(&info->lock, flags);
-+}
-+
-+void hci_h4p_change_speed(struct hci_h4p_info *info, unsigned long speed)
-+{
-+	unsigned int divisor;
-+	u8 lcr, mdr1;
-+
-+	NBT_DBG("Setting speed %lu\n", speed);
-+
-+	if (speed >= 460800) {
-+		divisor = UART_CLOCK / 13 / speed;
-+		mdr1 = 3;
-+	} else {
-+		divisor = UART_CLOCK / 16 / speed;
-+		mdr1 = 0;
-+	}
-+
-+	hci_h4p_outb(info, UART_OMAP_MDR1, 7); /* Make sure UART mode is disabled */
-+	lcr = hci_h4p_inb(info, UART_LCR);
-+	hci_h4p_outb(info, UART_LCR, UART_LCR_DLAB);     /* Set DLAB */
-+	hci_h4p_outb(info, UART_DLL, divisor & 0xff);    /* Set speed */
-+	hci_h4p_outb(info, UART_DLM, divisor >> 8);
-+	hci_h4p_outb(info, UART_LCR, lcr);
-+	hci_h4p_outb(info, UART_OMAP_MDR1, mdr1); /* Make sure UART mode is enabled */
-+}
-+
-+int hci_h4p_reset_uart(struct hci_h4p_info *info)
-+{
-+	int count = 0;
-+
-+	/* Reset the  UART */
-+	hci_h4p_outb(info, UART_OMAP_SYSC, UART_SYSC_OMAP_RESET);
-+	while (!(hci_h4p_inb(info, UART_OMAP_SYSS) & UART_SYSS_RESETDONE)) {
-+		if (count++ > 20000) {
-+			dev_err(info->dev, "hci_h4p: UART reset timeout\n");
-+			return -ENODEV;
-+		}
-+		udelay(1);
-+	}
-+
-+	return 0;
-+}
-+
-+int hci_h4p_init_uart(struct hci_h4p_info *info)
-+{
-+	int err;
-+
-+	err = hci_h4p_reset_uart(info);
-+	if (err < 0)
-+		return err;
-+
-+	/* Enable and setup FIFO */
-+	hci_h4p_outb(info, UART_LCR, UART_LCR_WLEN8);
-+	hci_h4p_outb(info, UART_OMAP_MDR1, 0x00); /* Make sure UART mode is enabled */
-+	hci_h4p_outb(info, UART_OMAP_SCR, 0x80);
-+	hci_h4p_outb(info, UART_EFR, UART_EFR_ECB);
-+	hci_h4p_outb(info, UART_MCR, UART_MCR_TCRTLR);
-+	hci_h4p_outb(info, UART_TI752_TLR, 0x1f);
-+	hci_h4p_outb(info, UART_TI752_TCR, 0xef);
-+	hci_h4p_outb(info, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
-+		     UART_FCR_CLEAR_XMIT | UART_FCR_R_TRIG_00);
-+	hci_h4p_outb(info, UART_IER, UART_IER_RDI);
-+
-+	return 0;
-+}
---- a/drivers/bluetooth/Kconfig
-+++ b/drivers/bluetooth/Kconfig
-@@ -173,6 +173,16 @@ config BT_HCIBTUART
- 	  Say Y here to compile support for HCI UART devices into the
- 	  kernel or say M to compile it as module (btuart_cs).
- 
-+config BT_HCIH4P
-+	tristate "HCI driver with H4 Nokia extensions"
-+	depends on BT && ARCH_OMAP
-+	help
-+	  Bluetooth HCI driver with H4 extensions.  This driver provides
-+	  support for H4+ Bluetooth chip with vendor-specific H4 extensions.
-+
-+	  Say Y here to compile support for h4 extended devices into the kernel
-+	  or say M to compile it as module (hci_h4p).
-+
- config BT_HCIVHCI
- 	tristate "HCI VHCI (Virtual HCI device) driver"
- 	help
---- a/drivers/bluetooth/Makefile
-+++ b/drivers/bluetooth/Makefile
-@@ -11,6 +11,7 @@ obj-$(CONFIG_BT_HCIDTL1)	+= dtl1_cs.o
- obj-$(CONFIG_BT_HCIBT3C)	+= bt3c_cs.o
- obj-$(CONFIG_BT_HCIBLUECARD)	+= bluecard_cs.o
- obj-$(CONFIG_BT_HCIBTUART)	+= btuart_cs.o
-+obj-$(CONFIG_BT_HCIH4P)		+= hci_h4p/
- 
- obj-$(CONFIG_BT_HCIBTUSB)	+= btusb.o
- obj-$(CONFIG_BT_HCIBTSDIO)	+= btsdio.o
diff --git a/target/linux/omap24xx/patches-3.3/410-hci-h4p-fixes.patch b/target/linux/omap24xx/patches-3.3/410-hci-h4p-fixes.patch
deleted file mode 100644
index 6741511a88..0000000000
--- a/target/linux/omap24xx/patches-3.3/410-hci-h4p-fixes.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/drivers/bluetooth/hci_h4p/core.c
-+++ b/drivers/bluetooth/hci_h4p/core.c
-@@ -36,9 +36,9 @@
- #include <linux/clk.h>
- #include <linux/gpio.h>
- 
--#include <mach/hardware.h>
--#include <mach/board.h>
--#include <mach/irqs.h>
-+#include <plat/hardware.h>
-+#include <plat/board.h>
-+#include <plat/irqs.h>
- #include <plat/serial.h>
- 
- #include <net/bluetooth/bluetooth.h>
---- a/drivers/bluetooth/hci_h4p/hci_h4p.h
-+++ b/drivers/bluetooth/hci_h4p/hci_h4p.h
-@@ -21,7 +21,7 @@
-  *
-  */
- 
--#include <mach/board.h>
-+#include <plat/board.h>
- 
- #include <net/bluetooth/bluetooth.h>
- #include <net/bluetooth/hci_core.h>
---- a/drivers/bluetooth/hci_h4p/sysfs.c
-+++ b/drivers/bluetooth/hci_h4p/sysfs.c
-@@ -48,15 +48,8 @@ static ssize_t hci_h4p_store_bdaddr(stru
- 		return -EINVAL;
- 	}
- 
--	//for (i = 0; i < 6; i++)
--		//info->bdaddr[i] = bdaddr[i] & 0xff;
--
--	info->bdaddr[0] = 0x00;
--	info->bdaddr[1] = 0x1D;
--	info->bdaddr[2] = 0x6E;
--	info->bdaddr[3] = 0xD4;
--	info->bdaddr[4] = 0xF0;
--	info->bdaddr[5] = 0x37;
-+	for (i = 0; i < 6; i++)
-+		info->bdaddr[i] = bdaddr[i] & 0xff;
- 
- 	return count;
- }
diff --git a/target/linux/omap24xx/patches-3.3/420-hci-h4p-interrupt-workaround.patch b/target/linux/omap24xx/patches-3.3/420-hci-h4p-interrupt-workaround.patch
deleted file mode 100644
index 0d2b4d24fd..0000000000
--- a/target/linux/omap24xx/patches-3.3/420-hci-h4p-interrupt-workaround.patch
+++ /dev/null
@@ -1,36 +0,0 @@
---- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
-+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
-@@ -235,7 +235,7 @@ struct omap_hwmod_irq_info omap2_timer11
- };
- 
- struct omap_hwmod_irq_info omap2_uart1_mpu_irqs[] = {
--	{ .irq = INT_24XX_UART1_IRQ, },
-+	{ .irq = 0, },
- 	{ .irq = -1 }
- };
- 
---- a/drivers/tty/serial/omap-serial.c
-+++ b/drivers/tty/serial/omap-serial.c
-@@ -517,8 +517,10 @@ static int serial_omap_startup(struct ua
- 	/*
- 	 * Allocate the IRQ
- 	 */
--	retval = request_irq(up->port.irq, serial_omap_irq, up->port.irqflags,
--				up->name, up);
-+	retval = 0;
-+	if (up->port.irq)
-+		retval = request_irq(up->port.irq, serial_omap_irq,
-+				     up->port.irqflags, up->name, up);
- 	if (retval)
- 		return retval;
- 
-@@ -629,7 +631,8 @@ static void serial_omap_shutdown(struct
- 	}
- 
- 	pm_runtime_put(&up->pdev->dev);
--	free_irq(up->port.irq, up);
-+	if (up->port.irq)
-+		free_irq(up->port.irq, up);
- }
- 
- static inline void
diff --git a/target/linux/omap24xx/patches-3.3/597-cbus-tahvo-usb-platform.patch b/target/linux/omap24xx/patches-3.3/597-cbus-tahvo-usb-platform.patch
deleted file mode 100644
index a635a8784c..0000000000
--- a/target/linux/omap24xx/patches-3.3/597-cbus-tahvo-usb-platform.patch
+++ /dev/null
@@ -1,34 +0,0 @@
---- a/arch/arm/mach-omap2/board-n8x0.c
-+++ b/arch/arm/mach-omap2/board-n8x0.c
-@@ -41,6 +41,7 @@
- #include <plat/mmc.h>
- #include <plat/serial.h>
- #include <plat/gpio-switch.h>
-+#include <plat/usb.h>
- 
- #include "mux.h"
- 
-@@ -486,6 +487,14 @@ static struct musb_hdrc_platform_data tu
- 	.config		= &musb_config,
- };
- 
-+static struct omap_usb_config n8x0_omap_usb_config __initdata = {
-+	.otg		= 1,
-+	.register_host	= 1,
-+	.register_dev	= 1,
-+	.hmc_mode	= 16,
-+	.pins[0]	= 6,
-+};
-+
- static void __init n8x0_usb_init(void)
- {
- 	int ret = 0;
-@@ -507,6 +516,8 @@ static void __init n8x0_usb_init(void)
- 	if (ret != 0)
- 		goto err;
- 
-+	omap2_usbfs_init(&n8x0_omap_usb_config);
-+
- 	printk(announce);
- 
- 	return;
diff --git a/target/linux/omap24xx/patches-3.3/710-evdev-events-without-grab.patch b/target/linux/omap24xx/patches-3.3/710-evdev-events-without-grab.patch
deleted file mode 100644
index b4637595f9..0000000000
--- a/target/linux/omap24xx/patches-3.3/710-evdev-events-without-grab.patch
+++ /dev/null
@@ -1,31 +0,0 @@
----
- drivers/input/evdev.c |   10 +++++++---
- 1 file changed, 7 insertions(+), 3 deletions(-)
-
---- a/drivers/input/evdev.c
-+++ b/drivers/input/evdev.c
-@@ -92,7 +92,7 @@ static void evdev_event(struct input_han
- 			unsigned int type, unsigned int code, int value)
- {
- 	struct evdev *evdev = handle->private;
--	struct evdev_client *client;
-+	struct evdev_client *client, *c;
- 	struct input_event event;
- 
- 	do_gettimeofday(&event.time);
-@@ -103,9 +103,13 @@ static void evdev_event(struct input_han
- 	rcu_read_lock();
- 
- 	client = rcu_dereference(evdev->grab);
--	if (client)
-+	if (client) {
- 		evdev_pass_event(client, &event);
--	else
-+		/* Also pass events to clients that did not grab the device. */
-+		list_for_each_entry_rcu(c, &evdev->client_list, node)
-+			if (c != client)
-+				evdev_pass_event(c, &event);
-+	} else
- 		list_for_each_entry_rcu(client, &evdev->client_list, node)
- 			evdev_pass_event(client, &event);
- 
diff --git a/target/linux/omap24xx/patches-3.3/810-mmc-fixes.patch b/target/linux/omap24xx/patches-3.3/810-mmc-fixes.patch
deleted file mode 100644
index 3dfb11661b..0000000000
--- a/target/linux/omap24xx/patches-3.3/810-mmc-fixes.patch
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/drivers/mmc/host/omap.c
-+++ b/drivers/mmc/host/omap.c
-@@ -1456,6 +1456,7 @@ static int __init mmc_omap_probe(struct
- 	host->dma_ch = -1;
- 
- 	host->irq = irq;
-+	host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
- 	host->phys_base = host->mem_res->start;
- 	host->virt_base = ioremap(res->start, resource_size(res));
- 	if (!host->virt_base)
-@@ -1495,7 +1496,9 @@ static int __init mmc_omap_probe(struct
- 		}
- 	}
- 
--	host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
-+	/* Make sure the detect workqueue was run at least once. */
-+	printk(KERN_INFO "OMAP-mmc: waiting for cards...\n");
-+	mmc_flush_scheduled_work();
- 
- 	return 0;
- 
---- a/drivers/mmc/core/core.c
-+++ b/drivers/mmc/core/core.c
-@@ -78,12 +78,13 @@ static int mmc_schedule_delayed_work(str
- }
- 
- /*
-- * Internal function. Flush all scheduled work from the MMC work queue.
-+ * Flush all scheduled work from the MMC work queue.
-  */
--static void mmc_flush_scheduled_work(void)
-+void mmc_flush_scheduled_work(void)
- {
- 	flush_workqueue(workqueue);
- }
-+EXPORT_SYMBOL(mmc_flush_scheduled_work);
- 
- #ifdef CONFIG_FAIL_MMC_REQUEST
- 
---- a/include/linux/mmc/host.h
-+++ b/include/linux/mmc/host.h
-@@ -445,6 +445,8 @@ static inline int mmc_boot_partition_acc
- 	return !(host->caps2 & MMC_CAP2_BOOTPART_NOACC);
- }
- 
-+void mmc_flush_scheduled_work(void);
-+
- #ifdef CONFIG_MMC_CLKGATE
- void mmc_host_clk_hold(struct mmc_host *host);
- void mmc_host_clk_release(struct mmc_host *host);
diff --git a/target/linux/omap24xx/patches-3.3/830-omap2-serial-fixes.patch b/target/linux/omap24xx/patches-3.3/830-omap2-serial-fixes.patch
deleted file mode 100644
index a80ee69411..0000000000
--- a/target/linux/omap24xx/patches-3.3/830-omap2-serial-fixes.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/arch/arm/mach-omap2/serial.c
-+++ b/arch/arm/mach-omap2/serial.c
-@@ -258,6 +258,8 @@ char *cmdline_find_option(char *str)
- 	return strstr(saved_command_line, str);
- }
- 
-+static struct omap_uart_state statebuf[4];
-+
- static int __init omap_serial_early_init(void)
- {
- 	do {
-@@ -272,9 +274,9 @@ static int __init omap_serial_early_init
- 		if (!oh)
- 			break;
- 
--		uart = kzalloc(sizeof(struct omap_uart_state), GFP_KERNEL);
--		if (WARN_ON(!uart))
-+		if (WARN_ON(num_uarts >= ARRAY_SIZE(statebuf)))
- 			return -ENODEV;
-+		uart = &statebuf[num_uarts];
- 
- 		uart->oh = oh;
- 		uart->num = num_uarts++;
diff --git a/target/linux/omap24xx/patches-3.3/850-musb-tusb-modular-fixes.patch b/target/linux/omap24xx/patches-3.3/850-musb-tusb-modular-fixes.patch
deleted file mode 100644
index 55a25a4aeb..0000000000
--- a/target/linux/omap24xx/patches-3.3/850-musb-tusb-modular-fixes.patch
+++ /dev/null
@@ -1,135 +0,0 @@
---- a/drivers/usb/musb/tusb6010.c
-+++ b/drivers/usb/musb/tusb6010.c
-@@ -221,6 +221,7 @@ void musb_write_fifo(struct musb_hw_ep *
- 	if (len > 0)
- 		tusb_fifo_write_unaligned(fifo, buf, len);
- }
-+EXPORT_SYMBOL(musb_write_fifo);
- 
- void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf)
- {
-@@ -268,6 +269,7 @@ void musb_read_fifo(struct musb_hw_ep *h
- 	if (len > 0)
- 		tusb_fifo_read_unaligned(fifo, buf, len);
- }
-+EXPORT_SYMBOL(musb_read_fifo);
- 
- static struct musb *the_musb;
- 
-@@ -1165,7 +1167,7 @@ static const struct musb_platform_ops tu
- 
- static u64 tusb_dmamask = DMA_BIT_MASK(32);
- 
--static int __init tusb_probe(struct platform_device *pdev)
-+static int tusb_probe(struct platform_device *pdev)
- {
- 	struct musb_hdrc_platform_data	*pdata = pdev->dev.platform_data;
- 	struct platform_device		*musb;
-@@ -1245,18 +1247,18 @@ static struct platform_driver tusb_drive
- 	},
- };
- 
--MODULE_DESCRIPTION("TUSB6010 MUSB Glue Layer");
--MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
--MODULE_LICENSE("GPL v2");
-+//MODULE_DESCRIPTION("TUSB6010 MUSB Glue Layer");
-+//MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
-+//MODULE_LICENSE("GPL v2");
- 
--static int __init tusb_init(void)
-+int musb_hdrc_glue_init(void)
- {
- 	return platform_driver_probe(&tusb_driver, tusb_probe);
- }
--subsys_initcall(tusb_init);
-+EXPORT_SYMBOL(musb_hdrc_glue_init);
- 
--static void __exit tusb_exit(void)
-+void musb_hdrc_glue_exit(void)
- {
- 	platform_driver_unregister(&tusb_driver);
- }
--module_exit(tusb_exit);
-+EXPORT_SYMBOL(musb_hdrc_glue_exit);
---- a/drivers/usb/musb/musb_core.c
-+++ b/drivers/usb/musb/musb_core.c
-@@ -207,7 +207,7 @@ static struct otg_io_access_ops musb_ulp
- 
- /*-------------------------------------------------------------------------*/
- 
--#if !defined(CONFIG_USB_MUSB_TUSB6010) && !defined(CONFIG_USB_MUSB_BLACKFIN)
-+#if !defined(CONFIG_USB_MUSB_TUSB6010) && !defined(CONFIG_USB_MUSB_TUSB6010_MODULE) && !defined(CONFIG_USB_MUSB_BLACKFIN)
- 
- /*
-  * Load an endpoint's FIFO
-@@ -250,7 +250,7 @@ void musb_write_fifo(struct musb_hw_ep *
- 	}
- }
- 
--#if !defined(CONFIG_USB_MUSB_AM35X)
-+#if !defined(CONFIG_USB_MUSB_AM35X) && !defined(CONFIG_USB_MUSB_TUSB6010) && !defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
- /*
-  * Unload an endpoint's FIFO
-  */
-@@ -2370,8 +2370,13 @@ static struct platform_driver musb_drive
- 
- /*-------------------------------------------------------------------------*/
- 
-+extern int musb_hdrc_glue_init(void);
-+extern void musb_hdrc_glue_exit(void);
-+
- static int __init musb_init(void)
- {
-+	int err;
-+
- 	if (usb_disabled())
- 		return 0;
- 
-@@ -2380,7 +2385,17 @@ static int __init musb_init(void)
- 		", "
- 		"otg (peripheral+host)",
- 		musb_driver_name);
--	return platform_driver_probe(&musb_driver, musb_probe);
-+
-+	err = musb_hdrc_glue_init();
-+	if (err)
-+		return err;
-+	err = platform_driver_probe(&musb_driver, musb_probe);
-+	if (err) {
-+		musb_hdrc_glue_exit();
-+		return err;
-+	}
-+
-+	return 0;
- }
- 
- /* make us init after usbcore and i2c (transceivers, regulators, etc)
-@@ -2391,5 +2406,6 @@ fs_initcall(musb_init);
- static void __exit musb_cleanup(void)
- {
- 	platform_driver_unregister(&musb_driver);
-+	musb_hdrc_glue_exit();
- }
- module_exit(musb_cleanup);
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -51,7 +51,7 @@ obj-$(CONFIG_EARLY_PRINTK_DBGP)	+= early
- obj-$(CONFIG_USB_ATM)		+= atm/
- obj-$(CONFIG_USB_SPEEDTOUCH)	+= atm/
- 
--obj-$(CONFIG_USB_MUSB_HDRC)	+= musb/
-+obj-y				+= musb/
- obj-$(CONFIG_USB_RENESAS_USBHS)	+= renesas_usbhs/
- obj-$(CONFIG_USB_GADGET)	+= gadget/
- 
---- a/drivers/usb/musb/Makefile
-+++ b/drivers/usb/musb/Makefile
-@@ -13,7 +13,7 @@ musb_hdrc-$(CONFIG_DEBUG_FS)			+= musb_d
- # Hardware Glue Layer
- obj-$(CONFIG_USB_MUSB_OMAP2PLUS)		+= omap2430.o
- obj-$(CONFIG_USB_MUSB_AM35X)			+= am35x.o
--obj-$(CONFIG_USB_MUSB_TUSB6010)			+= tusb6010.o
-+musb_hdrc-$(subst m,y,$(CONFIG_USB_MUSB_TUSB6010))	+= tusb6010.o
- obj-$(CONFIG_USB_MUSB_DAVINCI)			+= davinci.o
- obj-$(CONFIG_USB_MUSB_DA8XX)			+= da8xx.o
- obj-$(CONFIG_USB_MUSB_BLACKFIN)			+= blackfin.o
diff --git a/target/linux/omap24xx/patches-3.3/900-n810-battery-management.patch b/target/linux/omap24xx/patches-3.3/900-n810-battery-management.patch
deleted file mode 100644
index bdec65f777..0000000000
--- a/target/linux/omap24xx/patches-3.3/900-n810-battery-management.patch
+++ /dev/null
@@ -1,1917 +0,0 @@
---- a/drivers/cbus/Kconfig
-+++ b/drivers/cbus/Kconfig
-@@ -83,4 +83,12 @@ config CBUS_RETU_HEADSET
- 
- endif # CBUS_RETU
- 
-+config N810BM
-+	depends on CBUS_RETU && CBUS_TAHVO
-+	tristate "Nokia n810 battery management"
-+	---help---
-+	  Nokia n810 device battery management.
-+
-+	  If unsure, say N.
-+
- endmenu
---- a/drivers/cbus/Makefile
-+++ b/drivers/cbus/Makefile
-@@ -11,3 +11,6 @@ obj-$(CONFIG_CBUS_RETU_POWERBUTTON) += r
- obj-$(CONFIG_CBUS_RETU_RTC)	+= retu-rtc.o
- obj-$(CONFIG_CBUS_RETU_WDT)	+= retu-wdt.o
- obj-$(CONFIG_CBUS_RETU_HEADSET)	+= retu-headset.o
-+n810bm-y			+= n810bm_main.o
-+n810bm-y			+= lipocharge.o
-+obj-$(CONFIG_N810BM)		+= n810bm.o
---- /dev/null
-+++ b/drivers/cbus/n810bm_main.c
-@@ -0,0 +1,1572 @@
-+/*
-+ *   Nokia n810 battery management
-+ *
-+ *   WARNING: This driver is based on unconfirmed documentation.
-+ *            It is possibly dangerous to use this software.
-+ *            Use this software at your own risk!
-+ *
-+ *   Copyright (c) 2010-2011 Michael Buesch <mb@bu3sch.de>
-+ *
-+ *   This program is free software; you can redistribute it and/or
-+ *   modify it under the terms of the GNU General Public License
-+ *   as published by the Free Software Foundation; either version 2
-+ *   of the License, or (at your option) any later version.
-+ *
-+ *   This program is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *   GNU General Public License for more details.
-+ */
-+
-+#define DEBUG
-+
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/mutex.h>
-+#include <linux/timer.h>
-+#include <linux/firmware.h>
-+#include <linux/bitops.h>
-+#include <linux/workqueue.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+
-+#include "cbus.h"
-+#include "retu.h"
-+#include "tahvo.h"
-+#include "lipocharge.h"
-+
-+
-+#define N810BM_PMM_BLOCK_FILENAME	"n810-cal-bme-pmm.fw"
-+#define N810BM_PMM_BLOCK_SIZE		0x600
-+#define N810BM_PMM_GROUP_SIZE		0x200
-+#define N810BM_PMM_ELEM_SIZE		0x10
-+
-+#define N810BM_CHECK_INTERVAL		(HZ * 2)
-+#define N810BM_MIN_VOLTAGE_THRES	3200 /* Absolute minimum voltage threshold */
-+
-+
-+/* RETU_ADC_BSI
-+ * The battery size indicator ADC measures the resistance between
-+ * the battery BSI pin and ground. This is used to detect the battery
-+ * capacity, as the BSI resistor is related to capacity.
-+ *
-+ * Manually measured lookup table.
-+ * Hard to measure, thus not very accurate.
-+ *
-+ * Resistance  |  ADC value
-+ * ========================
-+ * 120k        |  0x3AC
-+ * 110k        |  0x37C
-+ * 100k        |  0x351
-+ *  90k        |  0x329
-+ */
-+
-+/* RETU_ADC_BATTVOLT
-+ * Manually measured lookup table.
-+ * Hard to measure, thus not very accurate.
-+ *
-+ * Voltage  |  ADC value
-+ * =====================
-+ * 2.80V    |  0x037
-+ * 2.90V    |  0x05E
-+ * 3.00V    |  0x090
-+ * 3.10V    |  0x0A4
-+ * 3.20V    |  0x0CC
-+ * 3.30V    |  0x0EF
-+ * 3.40V    |  0x115
-+ * 3.50V    |  0x136
-+ * 3.60V    |  0x15C
-+ * 3.70V    |  0x187
-+ * 3.80V    |  0x1A5
-+ * 3.90V    |  0x1C9
-+ * 4.00V    |  0x1ED
-+ * 4.10V    |  0x212
-+ * 4.20V    |  0x236
-+ */
-+
-+
-+/* PMM block ADC IDs */
-+enum n810bm_pmm_adc_id {
-+	N810BM_PMM_ADC_BATVOLT		= 0x01,	/* Battery voltage */
-+	N810BM_PMM_ADC_CHGVOLT		= 0x02,	/* Charger voltage */
-+	N810BM_PMM_ADC_GND2		= 0x03,	/* Ground 0V */
-+	N810BM_PMM_ADC_BSI		= 0x04,	/* Battery size indicator */
-+	N810BM_PMM_ADC_BATTEMP		= 0x05,	/* Battery temperature */
-+	N810BM_PMM_ADC_HEADSET		= 0x06,	/* Headset detection */
-+	N810BM_PMM_ADC_HOOKDET		= 0x07,	/* Hook detection */
-+	N810BM_PMM_ADC_LIGHTSENS	= 0x08,	/* Light sensor */
-+	N810BM_PMM_ADC_BATCURR		= 0x0E,	/* Battery current */
-+	N810BM_PMM_ADC_BKUPVOLT		= 0x13,	/* Backup battery voltage */
-+	N810BM_PMM_ADC_LIGHTTEMP	= 0x14,	/* Light sensor temperature */
-+	N810BM_PMM_ADC_RFGP		= 0x15,	/* RF GP */
-+	N810BM_PMM_ADC_WBTX		= 0x16,	/* Wideband TX detection */
-+	N810BM_PMM_ADC_RETUTEMP		= 0x17,	/* RETU chip temperature */
-+	N810BM_PMM_ADC_0xFE		= 0xFE,
-+};
-+
-+struct n810bm_adc_calib {
-+	enum n810bm_pmm_adc_id id;
-+	u8 flags;
-+	u8 adc_groupnr;
-+	u32 field1;
-+	u32 field2;
-+	u16 field3;
-+	u16 field4;
-+};
-+
-+struct n810bm_calib {
-+	struct n810bm_adc_calib adc[25];
-+};
-+
-+enum n810bm_capacity {
-+	N810BM_CAP_UNKNOWN	= -1,
-+	N810BM_CAP_NONE		= 0,
-+	N810BM_CAP_1500MAH	= 1500,	/* 1500 mAh battery */
-+};
-+
-+enum n810bm_notify_flags {
-+	N810BM_NOTIFY_charger_present,
-+	N810BM_NOTIFY_charger_state,
-+	N810BM_NOTIFY_charger_pwm,
-+};
-+
-+struct n810bm {
-+	int tahvo_irq;
-+	bool tahvo_irq_enabled;
-+
-+	bool battery_present;			/* A battery is inserted */
-+	bool charger_present;			/* The charger is connected */
-+	enum n810bm_capacity capacity;		/* The capacity of the inserted battery (if any) */
-+
-+	bool charger_enabled;			/* Want to charge? */
-+	struct lipocharge charger;		/* Charger subsystem */
-+	unsigned int active_current_pwm;	/* Active value of TAHVO_REG_CHGCURR */
-+	int current_measure_enabled;		/* Current measure enable refcount */
-+
-+	struct platform_device *pdev;
-+	struct n810bm_calib calib;		/* Calibration data */
-+
-+	bool verbose_charge_log;		/* Verbose charge logging */
-+
-+	unsigned long notify_flags;
-+	struct work_struct notify_work;
-+	struct delayed_work periodic_check_work;
-+
-+	bool initialized;			/* The hardware was initialized */
-+	struct mutex mutex;
-+};
-+
-+static void n810bm_notify_charger_present(struct n810bm *bm);
-+static void n810bm_notify_charger_state(struct n810bm *bm);
-+static void n810bm_notify_charger_pwm(struct n810bm *bm);
-+
-+
-+static struct platform_device *n810bm_retu_device;
-+static struct platform_device *n810bm_tahvo_device;
-+
-+
-+static inline struct n810bm * device_to_n810bm(struct device *dev)
-+{
-+	struct platform_device *pdev = to_platform_device(dev);
-+	struct n810bm *bm = platform_get_drvdata(pdev);
-+
-+	return bm;
-+}
-+
-+static inline bool n810bm_known_battery_present(struct n810bm *bm)
-+{
-+	return bm->battery_present &&
-+	       bm->capacity != N810BM_CAP_UNKNOWN &&
-+	       bm->capacity != N810BM_CAP_NONE;
-+}
-+
-+static void n810bm_emergency(struct n810bm *bm, const char *message) __noreturn;
-+static void n810bm_emergency(struct n810bm *bm, const char *message)
-+{
-+	printk(KERN_EMERG "n810 battery management fatal fault: %s\n", message);
-+	cbus_emergency();
-+}
-+
-+static u16 tahvo_read(struct n810bm *bm, unsigned int reg)
-+{
-+	return tahvo_read_reg(&n810bm_tahvo_device->dev, reg);
-+}
-+
-+static void tahvo_maskset(struct n810bm *bm, unsigned int reg, u16 mask, u16 set)
-+{
-+	tahvo_set_clear_reg_bits(&n810bm_tahvo_device->dev, reg, set, mask);
-+}
-+
-+static inline void tahvo_write(struct n810bm *bm, unsigned int reg, u16 value)
-+{
-+	tahvo_write_reg(&n810bm_tahvo_device->dev, reg, value);
-+}
-+
-+static inline void tahvo_set(struct n810bm *bm, unsigned int reg, u16 mask)
-+{
-+	tahvo_set_clear_reg_bits(&n810bm_tahvo_device->dev, reg, mask, mask);
-+}
-+
-+static inline void tahvo_clear(struct n810bm *bm, unsigned int reg, u16 mask)
-+{
-+	tahvo_set_clear_reg_bits(&n810bm_tahvo_device->dev, reg, 0, mask);
-+}
-+
-+static u16 retu_read(struct n810bm *bm, unsigned int reg)
-+{
-+	return retu_read_reg(&n810bm_retu_device->dev, reg);
-+}
-+
-+static void retu_maskset(struct n810bm *bm, unsigned int reg, u16 mask, u16 set)
-+{
-+	retu_set_clear_reg_bits(&n810bm_retu_device->dev, reg, set, mask);
-+}
-+
-+static inline void retu_write(struct n810bm *bm, unsigned int reg, u16 value)
-+{
-+	retu_write_reg(&n810bm_retu_device->dev, reg, value);
-+}
-+
-+static int retu_adc_average(struct n810bm *bm, unsigned int chan,
-+			    unsigned int nr_passes)
-+{
-+	unsigned int i, value = 0;
-+	int ret;
-+
-+	if (WARN_ON(!nr_passes))
-+		return 0;
-+	for (i = 0; i < nr_passes; i++) {
-+		ret = retu_read_adc(&n810bm_retu_device->dev, chan);
-+		if (ret < 0)
-+			return ret;
-+		value += ret;
-+	}
-+	value /= nr_passes;
-+
-+	return value;
-+}
-+
-+static struct n810bm_adc_calib * n810bm_get_adc_calib(struct n810bm *bm,
-+						enum n810bm_pmm_adc_id id)
-+{
-+	unsigned int index = 0;
-+	struct n810bm_adc_calib *cal;
-+
-+	if (id != N810BM_PMM_ADC_0xFE)
-+		index = (unsigned int)id + 1;
-+	if (index >= ARRAY_SIZE(bm->calib.adc))
-+		return NULL;
-+
-+	cal = &bm->calib.adc[index];
-+	WARN_ON(cal->id && cal->id != id);
-+
-+	return cal;
-+}
-+
-+static int pmm_record_get(struct n810bm *bm,
-+			  const struct firmware *pmm_block,
-+			  void *buffer, size_t length,
-+			  unsigned int group, unsigned int element, unsigned int offset)
-+{
-+	const u8 *pmm_area = pmm_block->data;
-+	u8 active_group_mask;
-+
-+	if (pmm_block->size != N810BM_PMM_BLOCK_SIZE)
-+		return -EINVAL;
-+	if (group >= N810BM_PMM_BLOCK_SIZE / N810BM_PMM_GROUP_SIZE)
-+		return -EINVAL;
-+	if (element >= N810BM_PMM_GROUP_SIZE / N810BM_PMM_ELEM_SIZE)
-+		return -EINVAL;
-+	if (offset >= N810BM_PMM_ELEM_SIZE || length > N810BM_PMM_ELEM_SIZE ||
-+	    length + offset > N810BM_PMM_ELEM_SIZE)
-+		return -EINVAL;
-+
-+	active_group_mask = pmm_area[16];
-+	if (!(active_group_mask & (1 << group))) {
-+		dev_dbg(&bm->pdev->dev, "pwm_record_get: Requested group %u, "
-+			"but group is not active", group);
-+		return -ENOENT;
-+	}
-+
-+	memcpy(buffer,
-+	       pmm_area + group * N810BM_PMM_GROUP_SIZE
-+			+ element * N810BM_PMM_ELEM_SIZE
-+			+ offset,
-+	       length);
-+
-+	return 0;
-+}
-+
-+/* PMM block group 1 element */
-+struct group1_element {
-+	u8 id;
-+	u8 flags;
-+	u8 adc_groupnr;
-+	u8 _padding;
-+	__le32 field1;
-+	__le32 field2;
-+} __packed;
-+
-+static int extract_group1_elem(struct n810bm *bm,
-+			       const struct firmware *pmm_block,
-+			       const enum n810bm_pmm_adc_id *pmm_adc_ids, size_t nr_pmm_adc_ids,
-+			       u32 field1_mask, u32 field2_mask)
-+{
-+	struct group1_element elem;
-+	int err;
-+	unsigned int i, element_nr;
-+	struct n810bm_adc_calib *adc_calib;
-+
-+	for (i = 0; i < nr_pmm_adc_ids; i++) {
-+		element_nr = (unsigned int)(pmm_adc_ids[i]) + 3;
-+
-+		err = pmm_record_get(bm, pmm_block, &elem, sizeof(elem),
-+				     1, element_nr, 0);
-+		if (err)
-+			continue;
-+		adc_calib = n810bm_get_adc_calib(bm, elem.id);
-+		if (!adc_calib) {
-+			dev_err(&bm->pdev->dev, "extract_group1_elem: "
-+				"Could not get calib element for 0x%02X",
-+				elem.id);
-+			return -EINVAL;
-+		}
-+
-+		if (adc_calib->flags == elem.flags) {
-+			adc_calib->field1 = le32_to_cpu(elem.field1) & field1_mask;
-+			adc_calib->field2 = le32_to_cpu(elem.field2) & field2_mask;
-+		} else {
-+			dev_dbg(&bm->pdev->dev, "extract_group1_elem: "
-+				"Not extracting fields due to flags mismatch: "
-+				"0x%02X vs 0x%02X",
-+				adc_calib->flags, elem.flags);
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+static int n810bm_parse_pmm_group1(struct n810bm *bm,
-+				   const struct firmware *pmm_block)
-+{
-+	struct n810bm_adc_calib *adc_calib;
-+	struct group1_element elem;
-+	int err;
-+
-+	static const enum n810bm_pmm_adc_id pmm_adc_ids_1[] = {
-+		N810BM_PMM_ADC_BATVOLT,
-+		N810BM_PMM_ADC_CHGVOLT,
-+		N810BM_PMM_ADC_BKUPVOLT,
-+		N810BM_PMM_ADC_BATCURR,
-+	};
-+	static const enum n810bm_pmm_adc_id pmm_adc_ids_2[] = {
-+		N810BM_PMM_ADC_BSI,
-+	};
-+	static const enum n810bm_pmm_adc_id pmm_adc_ids_3[] = {
-+		N810BM_PMM_ADC_BATTEMP,
-+	};
-+
-+	/* Parse element 2 */
-+	err = pmm_record_get(bm, pmm_block, &elem, sizeof(elem),
-+			     1, 2, 0);
-+	if (err) {
-+		dev_err(&bm->pdev->dev,
-+			"PMM: Failed to get group 1 / element 2");
-+		return err;
-+	}
-+	if (elem.id == N810BM_PMM_ADC_0xFE && elem.flags == 0x05) {
-+		adc_calib = n810bm_get_adc_calib(bm, elem.id);
-+		if (!adc_calib) {
-+			dev_err(&bm->pdev->dev,
-+				"calib extract: Failed to get 0xFE calib");
-+			return -EINVAL;
-+		}
-+		adc_calib->id = elem.id;
-+		adc_calib->flags = elem.flags;
-+		adc_calib->field1 = le32_to_cpu(elem.field1);
-+		adc_calib->field2 = le32_to_cpu(elem.field2);
-+	}
-+
-+	err = extract_group1_elem(bm, pmm_block,
-+				  pmm_adc_ids_1, ARRAY_SIZE(pmm_adc_ids_1),
-+				  0xFFFFFFFF, 0xFFFFFFFF);
-+	if (err)
-+		return err;
-+	err = extract_group1_elem(bm, pmm_block,
-+				  pmm_adc_ids_2, ARRAY_SIZE(pmm_adc_ids_2),
-+				  0xFFFFFFFF, 0);
-+	if (err)
-+		return err;
-+	err = extract_group1_elem(bm, pmm_block,
-+				  pmm_adc_ids_3, ARRAY_SIZE(pmm_adc_ids_3),
-+				  0xFFFFFFFF, 0x0000FFFF);
-+	if (err)
-+		return err;
-+
-+	return 0;
-+}
-+
-+static int n810bm_parse_pmm_group2(struct n810bm *bm,
-+				   const struct firmware *pmm_block)
-+{
-+	dev_err(&bm->pdev->dev, "TODO: CAL BME PMM group 2 parser not implemented, yet");
-+	return -EOPNOTSUPP;
-+}
-+
-+static void n810bm_adc_calib_set_defaults(struct n810bm *bm)
-+{
-+	struct n810bm_adc_calib *adc_calib;
-+	unsigned int i;
-+
-+	static const struct n810bm_adc_calib defaults[] = {
-+		/* ADC group-nr 0 */
-+		{
-+			.id		= N810BM_PMM_ADC_HEADSET,
-+			.flags		= 0x00,
-+			.adc_groupnr	= 0,
-+		}, {
-+			.id		= N810BM_PMM_ADC_HOOKDET,
-+			.flags		= 0x00,
-+			.adc_groupnr	= 0,
-+		}, {
-+			.id		= N810BM_PMM_ADC_RFGP,
-+			.flags		= 0x00,
-+			.adc_groupnr	= 0,
-+		}, {
-+			.id		= N810BM_PMM_ADC_LIGHTSENS,
-+			.flags		= 0x00,
-+			.adc_groupnr	= 0,
-+		}, {
-+			.id		= N810BM_PMM_ADC_WBTX,
-+			.flags		= 0x00,
-+			.adc_groupnr	= 0,
-+		}, {
-+			.id		= N810BM_PMM_ADC_RETUTEMP,
-+			.flags		= 0x00,
-+			.adc_groupnr	= 0,
-+		}, {
-+			.id		= N810BM_PMM_ADC_GND2,
-+			.flags		= 0x00,
-+			.adc_groupnr	= 0,
-+		},
-+		/* ADC group-nr 1 */
-+		{
-+			.id		= N810BM_PMM_ADC_0xFE,
-+			.flags		= 0x05,
-+			.adc_groupnr	= 1,
-+			.field1		= (u32)-2,
-+			.field2		= 13189,
-+		}, {
-+			.id		= N810BM_PMM_ADC_BATVOLT,
-+			.flags		= 0x01,
-+			.adc_groupnr	= 1,
-+			.field1		= 2527,
-+			.field2		= 21373,
-+		}, {
-+			.id		= N810BM_PMM_ADC_CHGVOLT,
-+			.flags		= 0x01,
-+			.adc_groupnr	= 1,
-+			.field1		= 0,
-+			.field2		= 129848,
-+		}, {
-+			.id		= N810BM_PMM_ADC_BKUPVOLT,
-+			.flags		= 0x01,
-+			.adc_groupnr	= 1,
-+			.field1		= 0,
-+			.field2		= 20000,
-+		}, {
-+			.id		= N810BM_PMM_ADC_BATCURR,
-+			.flags		= 0x06,
-+			.adc_groupnr	= 1,
-+			.field1		= 0,
-+			.field2		= 9660,
-+		},
-+		/* ADC group-nr 2 */
-+		{
-+			.id		= N810BM_PMM_ADC_BSI,
-+			.flags		= 0x02,
-+			.adc_groupnr	= 2,
-+			.field1		= 1169,
-+			.field2		= 0,
-+		},
-+		/* ADC group-nr 3 */
-+		{
-+			.id		= N810BM_PMM_ADC_BATTEMP,
-+			.flags		= 0x03,
-+			.adc_groupnr	= 3,
-+			.field1		= 265423000,
-+			.field2		= 298,
-+		},
-+		/* ADC group-nr 4 */
-+		{
-+			.id		= N810BM_PMM_ADC_LIGHTTEMP,
-+			.flags		= 0x04,
-+			.adc_groupnr	= 4,
-+			.field1		= 19533778,
-+			.field2		= 308019670,
-+			.field3		= 4700,
-+			.field4		= 2500,
-+		},
-+	};
-+
-+	/* Clear the array */
-+	memset(&bm->calib.adc, 0, sizeof(bm->calib.adc));
-+	for (i = 0; i < ARRAY_SIZE(bm->calib.adc); i++)
-+		bm->calib.adc[i].flags = 0xFF;
-+
-+	/* Copy the defaults */
-+	for (i = 0; i < ARRAY_SIZE(defaults); i++) {
-+		adc_calib = n810bm_get_adc_calib(bm, defaults[i].id);
-+		if (WARN_ON(!adc_calib))
-+			continue;
-+		*adc_calib = defaults[i];
-+	}
-+}
-+
-+static int n810bm_parse_pmm_block(struct n810bm *bm,
-+				  const struct firmware *pmm_block)
-+{
-+	u8 byte;
-+	int err;
-+	unsigned int i, count;
-+	struct n810bm_adc_calib *adc_calib;
-+
-+	/* Initialize to defaults */
-+	n810bm_adc_calib_set_defaults(bm);
-+
-+	/* Parse the PMM data */
-+	err = pmm_record_get(bm, pmm_block, &byte, sizeof(byte),
-+			     1, 0, 0); /* group 1 / element 0 */
-+	err |= (byte != 0x01);
-+	err |= pmm_record_get(bm, pmm_block, &byte, sizeof(byte),
-+			      1, 1, 0); /* group 1 / element 1 */
-+	err |= (byte != 0x01);
-+	if (err)
-+		err = n810bm_parse_pmm_group2(bm, pmm_block);
-+	else
-+		err = n810bm_parse_pmm_group1(bm, pmm_block);
-+	if (err)
-+		return err;
-+
-+	/* Sanity checks */
-+	for (i = 0, count = 0; i < ARRAY_SIZE(bm->calib.adc); i++) {
-+		adc_calib = &bm->calib.adc[i];
-+		if (adc_calib->flags == 0xFF)
-+			continue;
-+		switch (adc_calib->id) {
-+		case N810BM_PMM_ADC_BATVOLT:
-+			if (adc_calib->field1 < 2400 ||
-+			    adc_calib->field1 > 2700)
-+				goto value_check_fail;
-+			if (adc_calib->field2 < 20000 ||
-+			    adc_calib->field2 > 23000)
-+				goto value_check_fail;
-+			count++;
-+			break;
-+		case N810BM_PMM_ADC_BSI:
-+			if (adc_calib->field1 < 1100 ||
-+			    adc_calib->field1 > 1300)
-+				goto value_check_fail;
-+			count++;
-+			break;
-+		case N810BM_PMM_ADC_BATCURR:
-+			if (adc_calib->field2 < 7000 ||
-+			    adc_calib->field2 > 12000)
-+				goto value_check_fail;
-+			count++;
-+			break;
-+		case N810BM_PMM_ADC_0xFE:
-+			if ((s32)adc_calib->field1 > 14 ||
-+			    (s32)adc_calib->field1 < -14)
-+				goto value_check_fail;
-+			if (adc_calib->field2 < 13000 ||
-+			    adc_calib->field2 > 13350)
-+				goto value_check_fail;
-+			count++;
-+			break;
-+		case N810BM_PMM_ADC_CHGVOLT:
-+		case N810BM_PMM_ADC_BATTEMP:
-+		case N810BM_PMM_ADC_BKUPVOLT:
-+			count++;
-+			break;
-+		case N810BM_PMM_ADC_GND2:
-+		case N810BM_PMM_ADC_HOOKDET:
-+		case N810BM_PMM_ADC_LIGHTSENS:
-+		case N810BM_PMM_ADC_HEADSET:
-+		case N810BM_PMM_ADC_LIGHTTEMP:
-+		case N810BM_PMM_ADC_RFGP:
-+		case N810BM_PMM_ADC_WBTX:
-+		case N810BM_PMM_ADC_RETUTEMP:
-+			break;
-+		}
-+		dev_dbg(&bm->pdev->dev,
-+			"ADC 0x%02X calib: 0x%02X 0x%02X 0x%08X 0x%08X 0x%04X 0x%04X",
-+			adc_calib->id, adc_calib->flags, adc_calib->adc_groupnr,
-+			adc_calib->field1, adc_calib->field2,
-+			adc_calib->field3, adc_calib->field4);
-+	}
-+	if (count != 7) {
-+		dev_err(&bm->pdev->dev, "PMM sanity check: Did not find "
-+			"all required values (count=%u)", count);
-+		goto check_fail;
-+	}
-+
-+	return 0;
-+
-+value_check_fail:
-+	dev_err(&bm->pdev->dev, "PMM image sanity check failed "
-+		"(id=%02X, field1=%08X, field2=%08X)",
-+		adc_calib->id, adc_calib->field1, adc_calib->field2);
-+check_fail:
-+	return -EILSEQ;
-+}
-+
-+/* Set the current measure timer that triggers on Tahvo IRQ 7
-+ * An interval of zero disables the timer. */
-+static void n810bm_set_current_measure_timer(struct n810bm *bm,
-+					     u16 millisec_interval)
-+{
-+	u16 value = millisec_interval;
-+
-+	if (value <= 0xF905) {
-+		value = ((u64)0x10624DD3 * (u64)(value + 0xF9)) >> 32;
-+		value /= 16;
-+	} else
-+		value = 0xFF;
-+
-+	tahvo_write(bm, TAHVO_REG_BATCURRTIMER, value & 0xFF);
-+
-+	tahvo_set(bm, TAHVO_REG_CHGCTL,
-+		  TAHVO_REG_CHGCTL_CURTIMRST);
-+	tahvo_clear(bm, TAHVO_REG_CHGCTL,
-+		    TAHVO_REG_CHGCTL_CURTIMRST);
-+
-+	if (millisec_interval) {
-+		if (!bm->tahvo_irq_enabled) {
-+			bm->tahvo_irq_enabled = 1;
-+			enable_irq(bm->tahvo_irq);
-+		}
-+	} else {
-+		if (bm->tahvo_irq_enabled) {
-+			bm->tahvo_irq_enabled = 0;
-+			disable_irq_nosync(bm->tahvo_irq);
-+		}
-+	}
-+
-+	//TODO also do a software timer for safety.
-+}
-+
-+static void n810bm_enable_current_measure(struct n810bm *bm)
-+{
-+	WARN_ON(bm->current_measure_enabled < 0);
-+	if (!bm->current_measure_enabled) {
-+		/* Enable the current measurement circuitry */
-+		tahvo_set(bm, TAHVO_REG_CHGCTL,
-+			  TAHVO_REG_CHGCTL_CURMEAS);
-+		dev_dbg(&bm->pdev->dev,
-+			"Current measurement circuitry enabled");
-+	}
-+	bm->current_measure_enabled++;
-+}
-+
-+static void n810bm_disable_current_measure(struct n810bm *bm)
-+{
-+	bm->current_measure_enabled--;
-+	WARN_ON(bm->current_measure_enabled < 0);
-+	if (!bm->current_measure_enabled) {
-+		/* Disable the current measurement circuitry */
-+		tahvo_clear(bm, TAHVO_REG_CHGCTL,
-+			    TAHVO_REG_CHGCTL_CURMEAS);
-+		dev_dbg(&bm->pdev->dev,
-+			"Current measurement circuitry disabled");
-+	}
-+}
-+
-+/* Measure the actual battery current. Returns a signed value in mA.
-+ * Does only work, if current measurement was enabled. */
-+static int n810bm_measure_batt_current(struct n810bm *bm)
-+{
-+	u16 retval;
-+	int adc = 0, ma, i;
-+
-+	if (WARN_ON(bm->current_measure_enabled <= 0))
-+		return 0;
-+	for (i = 0; i < 3; i++) {
-+		retval = tahvo_read(bm, TAHVO_REG_BATCURR);
-+		adc += (s16)retval; /* Value is signed */
-+	}
-+	adc /= 3;
-+
-+	//TODO convert to mA
-+	ma = adc;
-+
-+	return ma;
-+}
-+
-+/* Requires bm->mutex locked */
-+static int n810bm_measure_batt_current_async(struct n810bm *bm)
-+{
-+	int ma;
-+	bool charging = lipocharge_is_charging(&bm->charger);
-+
-+	n810bm_enable_current_measure(bm);
-+	if (!charging)
-+		WARN_ON(bm->active_current_pwm != 0);
-+	tahvo_maskset(bm, TAHVO_REG_CHGCTL,
-+		      TAHVO_REG_CHGCTL_EN |
-+		      TAHVO_REG_CHGCTL_PWMOVR |
-+		      TAHVO_REG_CHGCTL_PWMOVRZERO,
-+		      TAHVO_REG_CHGCTL_EN |
-+		      TAHVO_REG_CHGCTL_PWMOVR |
-+		      (charging ? 0 : TAHVO_REG_CHGCTL_PWMOVRZERO));
-+	ma = n810bm_measure_batt_current(bm);
-+	tahvo_maskset(bm, TAHVO_REG_CHGCTL,
-+		      TAHVO_REG_CHGCTL_EN |
-+		      TAHVO_REG_CHGCTL_PWMOVR |
-+		      TAHVO_REG_CHGCTL_PWMOVRZERO,
-+		      (charging ? TAHVO_REG_CHGCTL_EN : 0));
-+	n810bm_disable_current_measure(bm);
-+
-+	return ma;
-+}
-+
-+static int adc_sanity_check(struct n810bm *bm, unsigned int channel)
-+{
-+	int value;
-+
-+	value = retu_read_adc(&n810bm_retu_device->dev, channel);
-+	if (value < 0) {
-+		dev_err(&bm->pdev->dev, "Failed to read GND ADC channel %u",
-+			channel);
-+		return -EIO;
-+	}
-+	dev_dbg(&bm->pdev->dev,
-+		"GND ADC channel %u sanity check got value: %d",
-+		channel, value);
-+	if (value > 5) {
-+		n810bm_emergency(bm, "GND ADC sanity check failed");
-+		return -EIO;
-+	}
-+
-+	return 0;
-+}
-+
-+static int n810bm_check_adc_sanity(struct n810bm *bm)
-+{
-+	int err;
-+
-+	/* Discard one conversion */
-+	retu_write(bm, RETU_REG_ADCSCR, 0);
-+	retu_read_adc(&n810bm_retu_device->dev, RETU_ADC_GND2);
-+
-+	err = adc_sanity_check(bm, RETU_ADC_GND2);
-+	if (err)
-+		return err;
-+
-+	return 0;
-+}
-+
-+/* Measure the battery voltage. Returns the value in mV (or negative value on error). */
-+static int n810bm_measure_batt_voltage(struct n810bm *bm)
-+{
-+	int adc;
-+	unsigned int mv;
-+	const unsigned int scale = 1000;
-+
-+	adc = retu_adc_average(bm, RETU_ADC_BATTVOLT, 5);
-+	if (adc < 0)
-+		return adc;
-+	if (adc <= 0x37)
-+		return 2800;
-+	mv = 2800 + ((adc - 0x37) * (((4200 - 2800) * scale) / (0x236 - 0x37))) / scale;
-+
-+	//TODO compensate for power consumption
-+	//TODO honor calibration values
-+
-+	return mv;
-+}
-+
-+/* Measure the charger voltage. Returns the value in mV (or negative value on error). */
-+static int n810bm_measure_charger_voltage(struct n810bm *bm)
-+{
-+	int adc;
-+	unsigned int mv;
-+
-+	adc = retu_adc_average(bm, RETU_ADC_CHGVOLT, 5);
-+	if (adc < 0)
-+		return adc;
-+	//TODO convert to mV
-+	mv = adc;
-+
-+	return mv;
-+}
-+
-+/* Measure backup battery voltage. Returns the value in mV (or negative value on error). */
-+static int n810bm_measure_backup_batt_voltage(struct n810bm *bm)
-+{
-+	int adc;
-+	unsigned int mv;
-+
-+	adc = retu_adc_average(bm, RETU_ADC_BKUPVOLT, 3);
-+	if (adc < 0)
-+		return adc;
-+	//TODO convert to mV
-+	mv = adc;
-+
-+	return mv;
-+}
-+
-+/* Measure the battery temperature. Returns the value in K (or negative value on error). */
-+static int n810bm_measure_batt_temp(struct n810bm *bm)
-+{
-+	int adc;
-+	unsigned int k;
-+
-+	adc = retu_adc_average(bm, RETU_ADC_BATTEMP, 3);
-+	if (adc < 0)
-+		return adc;
-+	//TODO convert to K
-+	k = adc;
-+
-+	return k;
-+}
-+
-+/* Read the battery capacity via BSI pin. */
-+static enum n810bm_capacity n810bm_read_batt_capacity(struct n810bm *bm)
-+{
-+	int adc;
-+	const unsigned int hyst = 20;
-+
-+	adc = retu_adc_average(bm, RETU_ADC_BSI, 5);
-+	if (adc < 0) {
-+		dev_err(&bm->pdev->dev, "Failed to read BSI ADC");
-+		return N810BM_CAP_UNKNOWN;
-+	}
-+
-+	if (adc >= 0x3B5 - hyst && adc <= 0x3B5 + hyst)
-+		return N810BM_CAP_1500MAH;
-+
-+	dev_err(&bm->pdev->dev, "Capacity indicator 0x%X unknown", adc);
-+
-+	return N810BM_CAP_UNKNOWN;
-+}
-+
-+/* Convert a battery voltage (in mV) to percentage. */
-+static unsigned int n810bm_mvolt2percent(unsigned int mv)
-+{
-+	const unsigned int minv = 3700;
-+	const unsigned int maxv = 4150;
-+	unsigned int percent;
-+
-+	mv = clamp(mv, minv, maxv);
-+	percent = (mv - minv) * 100 / (maxv - minv);
-+
-+	return percent;
-+}
-+
-+static void n810bm_start_charge(struct n810bm *bm)
-+{
-+	int err;
-+
-+	WARN_ON(!bm->battery_present);
-+	WARN_ON(!bm->charger_present);
-+
-+	/* Set PWM to zero */
-+	bm->active_current_pwm = 0;
-+	tahvo_write(bm, TAHVO_REG_CHGCURR, bm->active_current_pwm);
-+
-+	/* Charge global enable */
-+	tahvo_maskset(bm, TAHVO_REG_CHGCTL,
-+		      TAHVO_REG_CHGCTL_EN |
-+		      TAHVO_REG_CHGCTL_PWMOVR |
-+		      TAHVO_REG_CHGCTL_PWMOVRZERO,
-+		      TAHVO_REG_CHGCTL_EN);
-+
-+	WARN_ON((int)bm->capacity <= 0);
-+	bm->charger.capacity = bm->capacity;
-+	err = lipocharge_start(&bm->charger);
-+	WARN_ON(err);
-+
-+	/* Initialize current measurement circuitry */
-+	n810bm_enable_current_measure(bm);
-+	n810bm_set_current_measure_timer(bm, 250);
-+
-+	dev_info(&bm->pdev->dev, "Charging battery");
-+	n810bm_notify_charger_state(bm);
-+	n810bm_notify_charger_pwm(bm);
-+}
-+
-+static void n810bm_stop_charge(struct n810bm *bm)
-+{
-+	if (lipocharge_is_charging(&bm->charger)) {
-+		n810bm_set_current_measure_timer(bm, 0);
-+		n810bm_disable_current_measure(bm);
-+	}
-+	lipocharge_stop(&bm->charger);
-+
-+	/* Set PWM to zero */
-+	bm->active_current_pwm = 0;
-+	tahvo_write(bm, TAHVO_REG_CHGCURR, bm->active_current_pwm);
-+
-+	/* Charge global disable */
-+	tahvo_maskset(bm, TAHVO_REG_CHGCTL,
-+		      TAHVO_REG_CHGCTL_EN |
-+		      TAHVO_REG_CHGCTL_PWMOVR |
-+		      TAHVO_REG_CHGCTL_PWMOVRZERO,
-+		      0);
-+
-+	dev_info(&bm->pdev->dev, "Not charging battery");
-+	n810bm_notify_charger_state(bm);
-+	n810bm_notify_charger_pwm(bm);
-+}
-+
-+/* Periodic check */
-+static void n810bm_periodic_check_work(struct work_struct *work)
-+{
-+	struct n810bm *bm = container_of(to_delayed_work(work),
-+					 struct n810bm, periodic_check_work);
-+	u16 status;
-+	bool battery_was_present, charger_was_present;
-+	int mv;
-+
-+	mutex_lock(&bm->mutex);
-+
-+	status = retu_read(bm, RETU_REG_STATUS);
-+	battery_was_present = bm->battery_present;
-+	charger_was_present = bm->charger_present;
-+	bm->battery_present = !!(status & RETU_REG_STATUS_BATAVAIL);
-+	bm->charger_present = !!(status & RETU_REG_STATUS_CHGPLUG);
-+
-+	if (bm->battery_present != battery_was_present) {
-+		/* Battery state changed */
-+		if (bm->battery_present) {
-+			bm->capacity = n810bm_read_batt_capacity(bm);
-+			if (bm->capacity == N810BM_CAP_UNKNOWN) {
-+				dev_err(&bm->pdev->dev, "Unknown battery detected");
-+			} else {
-+				dev_info(&bm->pdev->dev, "Detected %u mAh battery",
-+					 (unsigned int)bm->capacity);
-+			}
-+		} else {
-+			bm->capacity = N810BM_CAP_NONE;
-+			dev_info(&bm->pdev->dev, "The main battery was removed");
-+			//TODO disable charging
-+		}
-+	}
-+
-+	if (bm->charger_present != charger_was_present) {
-+		/* Charger state changed */
-+		dev_info(&bm->pdev->dev, "The charger was %s",
-+			 bm->charger_present ? "plugged in" : "removed");
-+		n810bm_notify_charger_present(bm);
-+	}
-+
-+	if ((bm->battery_present && !bm->charger_present) ||
-+	    !n810bm_known_battery_present(bm)){
-+		/* We're draining the battery */
-+		mv = n810bm_measure_batt_voltage(bm);
-+		if (mv < 0) {
-+			n810bm_emergency(bm,
-+				"check: Failed to measure voltage");
-+		}
-+		if (mv < N810BM_MIN_VOLTAGE_THRES) {
-+			n810bm_emergency(bm,
-+				"check: Minimum voltage threshold reached");
-+		}
-+	}
-+
-+	if (bm->charger_present && n810bm_known_battery_present(bm)) {
-+		/* Known battery and charger are connected */
-+		if (bm->charger_enabled) {
-+			/* Charger is enabled */
-+			if (!lipocharge_is_charging(&bm->charger)) {
-+				//TODO start charging, if battery is below some threshold
-+				n810bm_start_charge(bm);
-+			}
-+		}
-+	}
-+
-+	if (lipocharge_is_charging(&bm->charger) && !bm->charger_present) {
-+		/* Charger was unplugged. */
-+		n810bm_stop_charge(bm);
-+	}
-+
-+	mutex_unlock(&bm->mutex);
-+	schedule_delayed_work(&bm->periodic_check_work,
-+			      round_jiffies_relative(N810BM_CHECK_INTERVAL));
-+}
-+
-+/*XXX
-+static void n810bm_adc_irq_handler(unsigned long data)
-+{
-+	struct n810bm *bm = (struct n810bm *)data;
-+
-+	retu_ack_irq(RETU_INT_ADCS);
-+	//TODO
-+dev_info(&bm->pdev->dev, "ADC interrupt triggered\n");
-+}
-+*/
-+
-+static irqreturn_t n810bm_tahvo_current_measure_irq_handler(int irq, void *data)
-+{
-+	struct n810bm *bm = data;
-+	int res, ma, mv, temp;
-+
-+	mutex_lock(&bm->mutex);
-+	if (!lipocharge_is_charging(&bm->charger))
-+		goto out_unlock;
-+
-+	tahvo_maskset(bm, TAHVO_REG_CHGCTL,
-+		      TAHVO_REG_CHGCTL_PWMOVR |
-+		      TAHVO_REG_CHGCTL_PWMOVRZERO,
-+		      TAHVO_REG_CHGCTL_PWMOVR);
-+	ma = n810bm_measure_batt_current(bm);
-+	tahvo_maskset(bm, TAHVO_REG_CHGCTL,
-+		      TAHVO_REG_CHGCTL_PWMOVR |
-+		      TAHVO_REG_CHGCTL_PWMOVRZERO,
-+		      TAHVO_REG_CHGCTL_PWMOVR |
-+		      TAHVO_REG_CHGCTL_PWMOVRZERO);
-+	msleep(10);
-+	mv = n810bm_measure_batt_voltage(bm);
-+	tahvo_maskset(bm, TAHVO_REG_CHGCTL,
-+		      TAHVO_REG_CHGCTL_PWMOVR |
-+		      TAHVO_REG_CHGCTL_PWMOVRZERO,
-+		      0);
-+	temp = n810bm_measure_batt_temp(bm);
-+	if (WARN_ON(mv < 0))
-+		goto out_unlock;
-+	if (WARN_ON(temp < 0))
-+		goto out_unlock;
-+
-+	if (bm->verbose_charge_log) {
-+		dev_info(&bm->pdev->dev,
-+			 "Battery charge state: %d mV, %d mA (%s)",
-+			 mv, ma,
-+			 (ma <= 0) ? "discharging" : "charging");
-+	}
-+	res = lipocharge_update_state(&bm->charger, mv, ma, temp);
-+	if (res) {
-+		if (res > 0)
-+			dev_info(&bm->pdev->dev, "Battery fully charged");
-+		n810bm_stop_charge(bm);
-+	}
-+out_unlock:
-+	mutex_unlock(&bm->mutex);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+#define DEFINE_ATTR_NOTIFY(attr_name)						\
-+	void n810bm_notify_##attr_name(struct n810bm *bm)			\
-+	{									\
-+		set_bit(N810BM_NOTIFY_##attr_name, &bm->notify_flags);		\
-+		wmb();								\
-+		schedule_work(&bm->notify_work);				\
-+	}
-+
-+#define DEFINE_SHOW_INT_FUNC(name, member)					\
-+	static ssize_t n810bm_attr_##name##_show(struct device *dev,		\
-+						 struct device_attribute *attr,	\
-+						 char *buf)			\
-+	{									\
-+		struct n810bm *bm = device_to_n810bm(dev);			\
-+		ssize_t count;							\
-+										\
-+		mutex_lock(&bm->mutex);						\
-+		count = snprintf(buf, PAGE_SIZE, "%d\n", (int)(bm->member));	\
-+		mutex_unlock(&bm->mutex);					\
-+										\
-+		return count;							\
-+	}
-+
-+#define DEFINE_STORE_INT_FUNC(name, member)					\
-+	static ssize_t n810bm_attr_##name##_store(struct device *dev,		\
-+						  struct device_attribute *attr,\
-+						  const char *buf, size_t count)\
-+	{									\
-+		struct n810bm *bm = device_to_n810bm(dev);			\
-+		long val;							\
-+		int err;							\
-+										\
-+		mutex_lock(&bm->mutex);						\
-+		err = strict_strtol(buf, 0, &val);				\
-+		if (!err)							\
-+			bm->member = (typeof(bm->member))val;			\
-+		mutex_unlock(&bm->mutex);					\
-+										\
-+		return err ? err : count;					\
-+	}
-+
-+#define DEFINE_ATTR_SHOW_INT(name, member)					\
-+	DEFINE_SHOW_INT_FUNC(name, member)					\
-+	static DEVICE_ATTR(name, S_IRUGO,					\
-+			   n810bm_attr_##name##_show, NULL);
-+
-+#define DEFINE_ATTR_SHOW_STORE_INT(name, member)				\
-+	DEFINE_SHOW_INT_FUNC(name, member)					\
-+	DEFINE_STORE_INT_FUNC(name, member)					\
-+	static DEVICE_ATTR(name, S_IRUGO | S_IWUSR,				\
-+			   n810bm_attr_##name##_show,				\
-+			   n810bm_attr_##name##_store);
-+
-+DEFINE_ATTR_SHOW_INT(battery_present, battery_present);
-+DEFINE_ATTR_SHOW_INT(charger_present, charger_present);
-+static DEFINE_ATTR_NOTIFY(charger_present);
-+DEFINE_ATTR_SHOW_INT(charger_state, charger.state);
-+static DEFINE_ATTR_NOTIFY(charger_state);
-+DEFINE_ATTR_SHOW_INT(charger_pwm, active_current_pwm);
-+static DEFINE_ATTR_NOTIFY(charger_pwm);
-+DEFINE_ATTR_SHOW_STORE_INT(charger_enable, charger_enabled);
-+DEFINE_ATTR_SHOW_STORE_INT(charger_verbose, verbose_charge_log);
-+
-+static ssize_t n810bm_attr_battery_level_show(struct device *dev,
-+					      struct device_attribute *attr,
-+					      char *buf)
-+{
-+	struct n810bm *bm = device_to_n810bm(dev);
-+	ssize_t count = -ENODEV;
-+	int millivolt;
-+
-+	mutex_lock(&bm->mutex);
-+	if (!bm->battery_present || lipocharge_is_charging(&bm->charger))
-+		millivolt = 0;
-+	else
-+		millivolt = n810bm_measure_batt_voltage(bm);
-+	if (millivolt >= 0) {
-+		count = snprintf(buf, PAGE_SIZE, "%u\n",
-+				 n810bm_mvolt2percent(millivolt));
-+	}
-+	mutex_unlock(&bm->mutex);
-+
-+	return count;
-+}
-+static DEVICE_ATTR(battery_level, S_IRUGO,
-+		   n810bm_attr_battery_level_show, NULL);
-+
-+static ssize_t n810bm_attr_battery_capacity_show(struct device *dev,
-+						 struct device_attribute *attr,
-+						 char *buf)
-+{
-+	struct n810bm *bm = device_to_n810bm(dev);
-+	ssize_t count;
-+	int capacity = 0;
-+
-+	mutex_lock(&bm->mutex);
-+	if (n810bm_known_battery_present(bm))
-+		capacity = (int)bm->capacity;
-+	count = snprintf(buf, PAGE_SIZE, "%d\n", capacity);
-+	mutex_unlock(&bm->mutex);
-+
-+	return count;
-+}
-+static DEVICE_ATTR(battery_capacity, S_IRUGO,
-+		   n810bm_attr_battery_capacity_show, NULL);
-+
-+static ssize_t n810bm_attr_battery_temp_show(struct device *dev,
-+					     struct device_attribute *attr,
-+					     char *buf)
-+{
-+	struct n810bm *bm = device_to_n810bm(dev);
-+	ssize_t count = -ENODEV;
-+	int k;
-+
-+	mutex_lock(&bm->mutex);
-+	k = n810bm_measure_batt_temp(bm);
-+	if (k >= 0)
-+		count = snprintf(buf, PAGE_SIZE, "%d\n", k);
-+	mutex_unlock(&bm->mutex);
-+
-+	return count;
-+}
-+static DEVICE_ATTR(battery_temp, S_IRUGO,
-+		   n810bm_attr_battery_temp_show, NULL);
-+
-+static ssize_t n810bm_attr_charger_voltage_show(struct device *dev,
-+						struct device_attribute *attr,
-+						char *buf)
-+{
-+	struct n810bm *bm = device_to_n810bm(dev);
-+	ssize_t count = -ENODEV;
-+	int mv = 0;
-+
-+	mutex_lock(&bm->mutex);
-+	if (bm->charger_present)
-+		mv = n810bm_measure_charger_voltage(bm);
-+	if (mv >= 0)
-+		count = snprintf(buf, PAGE_SIZE, "%d\n", mv);
-+	mutex_unlock(&bm->mutex);
-+
-+	return count;
-+}
-+static DEVICE_ATTR(charger_voltage, S_IRUGO,
-+		   n810bm_attr_charger_voltage_show, NULL);
-+
-+static ssize_t n810bm_attr_backup_battery_voltage_show(struct device *dev,
-+						       struct device_attribute *attr,
-+						       char *buf)
-+{
-+	struct n810bm *bm = device_to_n810bm(dev);
-+	ssize_t count = -ENODEV;
-+	int mv;
-+
-+	mutex_lock(&bm->mutex);
-+	mv = n810bm_measure_backup_batt_voltage(bm);
-+	if (mv >= 0)
-+		count = snprintf(buf, PAGE_SIZE, "%d\n", mv);
-+	mutex_unlock(&bm->mutex);
-+
-+	return count;
-+}
-+static DEVICE_ATTR(backup_battery_voltage, S_IRUGO,
-+		   n810bm_attr_backup_battery_voltage_show, NULL);
-+
-+static ssize_t n810bm_attr_battery_current_show(struct device *dev,
-+						struct device_attribute *attr,
-+						char *buf)
-+{
-+	struct n810bm *bm = device_to_n810bm(dev);
-+	ssize_t count = -ENODEV;
-+	int ma = 0;
-+
-+	mutex_lock(&bm->mutex);
-+	if (bm->battery_present)
-+		ma = n810bm_measure_batt_current_async(bm);
-+	count = snprintf(buf, PAGE_SIZE, "%d\n", ma);
-+	mutex_unlock(&bm->mutex);
-+
-+	return count;
-+}
-+static DEVICE_ATTR(battery_current, S_IRUGO,
-+		   n810bm_attr_battery_current_show, NULL);
-+
-+static const struct device_attribute *n810bm_attrs[] = {
-+	&dev_attr_battery_present,
-+	&dev_attr_battery_level,
-+	&dev_attr_battery_current,
-+	&dev_attr_battery_capacity,
-+	&dev_attr_battery_temp,
-+	&dev_attr_backup_battery_voltage,
-+	&dev_attr_charger_present,
-+	&dev_attr_charger_state,
-+	&dev_attr_charger_verbose,
-+	&dev_attr_charger_voltage,
-+	&dev_attr_charger_enable,
-+	&dev_attr_charger_pwm,
-+};
-+
-+static void n810bm_notify_work(struct work_struct *work)
-+{
-+	struct n810bm *bm = container_of(work, struct n810bm, notify_work);
-+	unsigned long notify_flags;
-+
-+	notify_flags = xchg(&bm->notify_flags, 0);
-+	mb();
-+
-+#define do_notify(attr_name)						\
-+	do {								\
-+		if (notify_flags & (1 << N810BM_NOTIFY_##attr_name)) {	\
-+			sysfs_notify(&bm->pdev->dev.kobj, NULL,		\
-+				     dev_attr_##attr_name.attr.name);	\
-+		}							\
-+	} while (0)
-+
-+	do_notify(charger_present);
-+	do_notify(charger_state);
-+	do_notify(charger_pwm);
-+}
-+
-+static int n810bm_charger_set_current_pwm(struct lipocharge *c,
-+					  unsigned int duty_cycle)
-+{
-+	struct n810bm *bm = container_of(c, struct n810bm, charger);
-+	int err = -EINVAL;
-+
-+	WARN_ON(!mutex_is_locked(&bm->mutex));
-+	if (WARN_ON(duty_cycle > 0xFF))
-+		goto out;
-+	if (WARN_ON(!bm->charger_enabled))
-+		goto out;
-+	if (WARN_ON(!bm->battery_present || !bm->charger_present))
-+		goto out;
-+
-+	if (duty_cycle != bm->active_current_pwm) {
-+		bm->active_current_pwm = duty_cycle;
-+		tahvo_write(bm, TAHVO_REG_CHGCURR, duty_cycle);
-+		n810bm_notify_charger_pwm(bm);
-+	}
-+
-+	err = 0;
-+out:
-+
-+	return err;
-+}
-+
-+static void n810bm_charger_emergency(struct lipocharge *c)
-+{
-+	struct n810bm *bm = container_of(c, struct n810bm, charger);
-+
-+	n810bm_emergency(bm, "Battery charger fault");
-+}
-+
-+static void n810bm_hw_exit(struct n810bm *bm)
-+{
-+	n810bm_stop_charge(bm);
-+	retu_write(bm, RETU_REG_ADCSCR, 0);
-+}
-+
-+static int n810bm_hw_init(struct n810bm *bm)
-+{
-+	int err;
-+
-+	err = n810bm_check_adc_sanity(bm);
-+	if (err)
-+		return err;
-+
-+	n810bm_stop_charge(bm);
-+
-+	return 0;
-+}
-+
-+static void n810bm_cancel_and_flush_work(struct n810bm *bm)
-+{
-+	cancel_delayed_work_sync(&bm->periodic_check_work);
-+	cancel_work_sync(&bm->notify_work);
-+	flush_scheduled_work();
-+}
-+
-+static int n810bm_device_init(struct n810bm *bm)
-+{
-+	int attr_index;
-+	int err;
-+
-+	bm->charger.rate = LIPORATE_p6C;
-+	bm->charger.top_voltage = 4100;
-+	bm->charger.duty_cycle_max = 0xFF;
-+	bm->charger.set_current_pwm = n810bm_charger_set_current_pwm;
-+	bm->charger.emergency = n810bm_charger_emergency;
-+	lipocharge_init(&bm->charger, &bm->pdev->dev);
-+
-+	err = n810bm_hw_init(bm);
-+	if (err)
-+		goto error;
-+	for (attr_index = 0; attr_index < ARRAY_SIZE(n810bm_attrs); attr_index++) {
-+		err = device_create_file(&bm->pdev->dev, n810bm_attrs[attr_index]);
-+		if (err)
-+			goto err_unwind_attrs;
-+	}
-+/*XXX
-+	err = retu_request_irq(RETU_INT_ADCS,
-+			       n810bm_adc_irq_handler,
-+			       (unsigned long)bm, "n810bm");
-+	if (err)
-+		goto err_unwind_attrs;
-+*/
-+	bm->tahvo_irq = platform_get_irq(n810bm_tahvo_device, 0);
-+	err = request_threaded_irq(bm->tahvo_irq, NULL,
-+				   n810bm_tahvo_current_measure_irq_handler,
-+				   IRQF_ONESHOT, "tahvo-n810bm", bm);
-+	if (err)
-+		goto err_free_retu_irq;
-+	disable_irq_nosync(bm->tahvo_irq);
-+	bm->tahvo_irq_enabled = 0;
-+
-+	schedule_delayed_work(&bm->periodic_check_work,
-+			      round_jiffies_relative(N810BM_CHECK_INTERVAL));
-+
-+	bm->initialized = 1;
-+	dev_info(&bm->pdev->dev, "Battery management initialized");
-+
-+	return 0;
-+
-+err_free_retu_irq:
-+//XXX	retu_free_irq(RETU_INT_ADCS);
-+err_unwind_attrs:
-+	for (attr_index--; attr_index >= 0; attr_index--)
-+		device_remove_file(&bm->pdev->dev, n810bm_attrs[attr_index]);
-+/*err_exit:*/
-+	n810bm_hw_exit(bm);
-+error:
-+	n810bm_cancel_and_flush_work(bm);
-+
-+	return err;
-+}
-+
-+static void n810bm_device_exit(struct n810bm *bm)
-+{
-+	int i;
-+
-+	if (!bm->initialized)
-+		return;
-+
-+	lipocharge_exit(&bm->charger);
-+	free_irq(bm->tahvo_irq, bm);
-+//XXX	retu_free_irq(RETU_INT_ADCS);
-+	for (i = 0; i < ARRAY_SIZE(n810bm_attrs); i++)
-+		device_remove_file(&bm->pdev->dev, n810bm_attrs[i]);
-+
-+	n810bm_cancel_and_flush_work(bm);
-+
-+	n810bm_hw_exit(bm);
-+
-+	bm->initialized = 0;
-+}
-+
-+static void n810bm_pmm_block_found(const struct firmware *fw, void *context)
-+{
-+	struct n810bm *bm = context;
-+	int err;
-+
-+	if (!fw) {
-+		dev_err(&bm->pdev->dev,
-+			"CAL PMM block image file not found");
-+		goto err_release;
-+	}
-+	if (fw->size != N810BM_PMM_BLOCK_SIZE ||
-+	    memcmp(fw->data, "BME-PMM-BLOCK01", 15) != 0) {
-+		dev_err(&bm->pdev->dev,
-+			"CAL PMM block image file has an invalid format");
-+		goto err_release;
-+	}
-+
-+	err = n810bm_parse_pmm_block(bm, fw);
-+	if (err)
-+		goto err_release;
-+	release_firmware(fw);
-+
-+	err = n810bm_device_init(bm);
-+	if (err) {
-+		dev_err(&bm->pdev->dev,
-+			"Failed to initialized battery management (%d)", err);
-+		goto error;
-+	}
-+
-+	return;
-+err_release:
-+	release_firmware(fw);
-+error:
-+	return;
-+}
-+
-+static int __devinit n810bm_probe(void)
-+{
-+	struct n810bm *bm;
-+	int err;
-+
-+	if (!n810bm_retu_device || !n810bm_tahvo_device)
-+		return 0;
-+
-+	bm = kzalloc(sizeof(*bm), GFP_KERNEL);
-+	if (!bm)
-+		return -ENOMEM;
-+	bm->pdev = n810bm_retu_device;
-+	platform_set_drvdata(n810bm_retu_device, bm);
-+	platform_set_drvdata(n810bm_tahvo_device, bm);
-+	mutex_init(&bm->mutex);
-+	INIT_DELAYED_WORK(&bm->periodic_check_work, n810bm_periodic_check_work);
-+	INIT_WORK(&bm->notify_work, n810bm_notify_work);
-+
-+	dev_info(&bm->pdev->dev, "Requesting CAL BME PMM block firmware file "
-+		 N810BM_PMM_BLOCK_FILENAME);
-+	err = request_firmware_nowait(THIS_MODULE, 1,
-+				      N810BM_PMM_BLOCK_FILENAME,
-+				      &bm->pdev->dev, GFP_KERNEL,
-+				      bm, n810bm_pmm_block_found);
-+	if (err) {
-+		dev_err(&bm->pdev->dev,
-+			"Failed to request CAL PMM block image file (%d)", err);
-+		goto err_free;
-+	}
-+
-+	return 0;
-+
-+err_free:
-+	kfree(bm);
-+
-+	return err;
-+}
-+
-+static void __devexit n810bm_remove(void)
-+{
-+	struct n810bm *bm;
-+
-+	if (!n810bm_retu_device || !n810bm_tahvo_device)
-+		return;
-+	bm = platform_get_drvdata(n810bm_retu_device);
-+
-+	n810bm_device_exit(bm);
-+
-+	kfree(bm);
-+	platform_set_drvdata(n810bm_retu_device, NULL);
-+	platform_set_drvdata(n810bm_tahvo_device, NULL);
-+}
-+
-+static int __devinit n810bm_retu_probe(struct platform_device *pdev)
-+{
-+	n810bm_retu_device = pdev;
-+	return n810bm_probe();
-+}
-+
-+static int __devexit n810bm_retu_remove(struct platform_device *pdev)
-+{
-+	n810bm_remove();
-+	n810bm_retu_device = NULL;
-+	return 0;
-+}
-+
-+static int __devinit n810bm_tahvo_probe(struct platform_device *pdev)
-+{
-+	n810bm_tahvo_device = pdev;
-+	return n810bm_probe();
-+}
-+
-+static int __devexit n810bm_tahvo_remove(struct platform_device *pdev)
-+{
-+	n810bm_remove();
-+	n810bm_tahvo_device = NULL;
-+	return 0;
-+}
-+
-+static struct platform_driver n810bm_retu_driver = {
-+	.remove		= __devexit_p(n810bm_retu_remove),
-+	.driver		= {
-+		.name	= "retu-n810bm",
-+	}
-+};
-+
-+static struct platform_driver n810bm_tahvo_driver = {
-+	.remove		= __devexit_p(n810bm_tahvo_remove),
-+	.driver		= {
-+		.name	= "tahvo-n810bm",
-+	}
-+};
-+
-+static int __init n810bm_modinit(void)
-+{
-+	int err;
-+
-+	err = platform_driver_probe(&n810bm_retu_driver, n810bm_retu_probe);
-+	if (err)
-+		return err;
-+	err = platform_driver_probe(&n810bm_tahvo_driver, n810bm_tahvo_probe);
-+	if (err) {
-+		platform_driver_unregister(&n810bm_retu_driver);
-+		return err;
-+	}
-+
-+	return 0;
-+}
-+module_init(n810bm_modinit);
-+
-+static void __exit n810bm_modexit(void)
-+{
-+	platform_driver_unregister(&n810bm_tahvo_driver);
-+	platform_driver_unregister(&n810bm_retu_driver);
-+}
-+module_exit(n810bm_modexit);
-+
-+MODULE_DESCRIPTION("Nokia n810 battery management");
-+MODULE_FIRMWARE(N810BM_PMM_BLOCK_FILENAME);
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Michael Buesch");
---- /dev/null
-+++ b/drivers/cbus/lipocharge.c
-@@ -0,0 +1,183 @@
-+/*
-+ *   Generic LIPO battery charger
-+ *
-+ *   Copyright (c) 2010-2011 Michael Buesch <mb@bu3sch.de>
-+ *
-+ *   This program is free software; you can redistribute it and/or
-+ *   modify it under the terms of the GNU General Public License
-+ *   as published by the Free Software Foundation; either version 2
-+ *   of the License, or (at your option) any later version.
-+ *
-+ *   This program is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *   GNU General Public License for more details.
-+ */
-+
-+#define DEBUG
-+
-+#include "lipocharge.h"
-+
-+#include <linux/slab.h>
-+
-+
-+/* Hysteresis constants */
-+#define CURRENT_HYST		30 /* mA */
-+#define VOLTAGE_HYST		10 /* mV */
-+
-+/* Threshold constants */
-+#define FINISH_CURRENT_PERCENT	3
-+
-+
-+/* Returns the requested first-stage charge current in mA */
-+static inline unsigned int get_stage1_charge_current(struct lipocharge *c)
-+{
-+	/* current = (capacity * C) */
-+	return c->capacity * c->rate / 1000;
-+}
-+
-+void lipocharge_init(struct lipocharge *c, struct device *dev)
-+{
-+	c->dev = dev;
-+	c->state = LIPO_IDLE;
-+}
-+
-+void lipocharge_exit(struct lipocharge *c)
-+{
-+	c->state = LIPO_IDLE;
-+}
-+
-+int lipocharge_start(struct lipocharge *c)
-+{
-+	int err;
-+
-+	if (c->state != LIPO_IDLE)
-+		return -EBUSY;
-+	if (!c->set_current_pwm || !c->emergency)
-+		return -EINVAL;
-+	if (!c->top_voltage || c->top_voltage > 4200)
-+		return -EINVAL;
-+
-+	c->active_duty_cycle = 0;
-+	err = c->set_current_pwm(c, c->active_duty_cycle);
-+	if (err)
-+		return err;
-+	c->state = LIPO_FIRST_STAGE;
-+
-+	return 0;
-+}
-+
-+void lipocharge_stop(struct lipocharge *c)
-+{
-+	if (c->state == LIPO_IDLE)
-+		return;
-+	c->state = LIPO_IDLE;
-+}
-+
-+static int lipocharge_increase_current(struct lipocharge *c,
-+				       unsigned int inc_permille)
-+{
-+	int old_pwm, new_pwm;
-+
-+	if (c->active_duty_cycle >= c->duty_cycle_max)
-+		return 0;
-+
-+	old_pwm = c->active_duty_cycle;
-+	new_pwm = old_pwm + (c->duty_cycle_max * inc_permille / 1000);
-+	new_pwm = min(new_pwm, (int)c->duty_cycle_max);
-+	c->active_duty_cycle = new_pwm;
-+
-+	dev_dbg(c->dev, "lipo: Increasing duty_cycle by "
-+		"%u permille (0x%02X -> 0x%02X)",
-+		inc_permille, old_pwm, new_pwm);
-+
-+	return c->set_current_pwm(c, c->active_duty_cycle);
-+}
-+
-+static int lipocharge_decrease_current(struct lipocharge *c,
-+				       unsigned int dec_permille)
-+{
-+	int old_pwm, new_pwm;
-+
-+	if (c->active_duty_cycle <= 0)
-+		return 0;
-+
-+	old_pwm = c->active_duty_cycle;
-+	new_pwm = old_pwm - (c->duty_cycle_max * dec_permille / 1000);
-+	new_pwm = max(0, new_pwm);
-+	c->active_duty_cycle = new_pwm;
-+
-+	dev_dbg(c->dev, "lipo: Decreasing duty_cycle by "
-+		"%u permille (0x%02X -> 0x%02X)",
-+		dec_permille, old_pwm, new_pwm);
-+
-+	return c->set_current_pwm(c, c->active_duty_cycle);
-+}
-+
-+/** lipocharge_update_state - Update the charge state
-+ * @c: The context.
-+ * @voltage_mV: The measured battery voltage.
-+ * @current_mA: The measured charge current.
-+ *		negative -> drain.
-+ *		positive -> charge.
-+ * @temp_K: Battery temperature in K.
-+ *
-+ * Returns 0 on success, -1 on error.
-+ * Returns 1, if the charging process is finished.
-+ */
-+int lipocharge_update_state(struct lipocharge *c,
-+			    unsigned int voltage_mV,
-+			    int current_mA,
-+			    unsigned int temp_K)
-+{
-+	int requested_current, current_diff;
-+	int err;
-+	unsigned int permille;
-+
-+	//TODO temp
-+
-+restart:
-+	switch (c->state) {
-+	case LIPO_IDLE:
-+		dev_err(c->dev, "%s: called while idle", __func__);
-+		return -EINVAL;
-+	case LIPO_FIRST_STAGE:	/* Constant current */
-+//printk("GOT %u %d %u\n", voltage_mV, current_mA, temp_K);
-+		if (voltage_mV >= c->top_voltage) {
-+			/* Float voltage reached.
-+			 * Switch charger mode to "constant current" */
-+			c->state = LIPO_SECOND_STAGE;
-+			dev_dbg(c->dev, "Switched to second charging stage.");
-+			goto restart;
-+		}
-+		/* Float voltage not reached, yet.
-+		 * Try to get the requested constant current. */
-+		requested_current = get_stage1_charge_current(c);
-+		if (current_mA < 0)
-+			current_mA = 0;
-+		current_diff = requested_current - current_mA;
-+		if (abs(requested_current - current_mA) > CURRENT_HYST) {
-+			if (current_diff > 0) {
-+				/* Increase current */
-+				permille = current_diff * 1000 / requested_current;
-+				permille /= 2;
-+				err = lipocharge_increase_current(c, permille);
-+				if (err)
-+					return err;
-+			} else {
-+				/* Decrease current */
-+				permille = (-current_diff) * 1000 / requested_current;
-+				permille /= 2;
-+				err = lipocharge_decrease_current(c, permille);
-+				if (err)
-+					return err;
-+			}
-+		}
-+		break;
-+	case LIPO_SECOND_STAGE:	/* Constant voltage */
-+		//TODO
-+		break;
-+	}
-+
-+	return 0;
-+}
---- /dev/null
-+++ b/drivers/cbus/lipocharge.h
-@@ -0,0 +1,60 @@
-+#ifndef LIPOCHARGE_H_
-+#define LIPOCHARGE_H_
-+
-+#include <linux/types.h>
-+#include <linux/device.h>
-+
-+
-+#define LIPORATE(a,b)	(((a) * 1000) + ((b) * 100))
-+#define LIPORATE_p6C	LIPORATE(0,6)	/* 0.6C */
-+
-+enum lipocharge_state {
-+	LIPO_IDLE = 0,		/* Not charging */
-+	LIPO_FIRST_STAGE,	/* Charging: constant current */
-+	LIPO_SECOND_STAGE,	/* Charging: constant voltage */
-+};
-+
-+/** struct lipocharge - A generic LIPO charger
-+ *
-+ * @capacity: Battery capacity in mAh.
-+ * @rate: Charge rate.
-+ * @top_voltage: Fully charged voltage, in mV.
-+ * @duty_cycle_max: Max value for duty_cycle.
-+ *
-+ * @set_charge_current: Set the charge current PWM duty cycle.
-+ * @emergency: Something went wrong. Force shutdown.
-+ */
-+struct lipocharge {
-+	unsigned int capacity;
-+	unsigned int rate;
-+	unsigned int top_voltage;
-+	unsigned int duty_cycle_max;
-+
-+	int (*set_current_pwm)(struct lipocharge *c, unsigned int duty_cycle);
-+	void (*emergency)(struct lipocharge *c);
-+
-+	/* internal */
-+	struct device *dev;
-+	enum lipocharge_state state;
-+	unsigned int active_duty_cycle;
-+
-+	//TODO implement timer to cut power after maximum charge time.
-+};
-+
-+void lipocharge_init(struct lipocharge *c, struct device *dev);
-+void lipocharge_exit(struct lipocharge *c);
-+
-+int lipocharge_start(struct lipocharge *c);
-+void lipocharge_stop(struct lipocharge *c);
-+
-+int lipocharge_update_state(struct lipocharge *c,
-+			    unsigned int voltage_mV,
-+			    int current_mA,
-+			    unsigned int temp_K);
-+
-+static inline bool lipocharge_is_charging(struct lipocharge *c)
-+{
-+	return (c->state != LIPO_IDLE);
-+}
-+
-+#endif /* LIPOCHARGE_H_ */
---- a/drivers/cbus/cbus.c
-+++ b/drivers/cbus/cbus.c
-@@ -36,6 +36,7 @@
- #include <linux/gpio.h>
- #include <linux/platform_device.h>
- #include <linux/platform_data/cbus.h>
-+#include <linux/reboot.h>
- 
- #include "cbus.h"
- 
-@@ -326,6 +327,13 @@ static void __exit cbus_bus_exit(void)
- }
- module_exit(cbus_bus_exit);
- 
-+void cbus_emergency(void)
-+{
-+	machine_power_off();
-+	panic("cbus: Failed to halt machine in emergency state\n");
-+}
-+EXPORT_SYMBOL(cbus_emergency);
-+
- MODULE_DESCRIPTION("CBUS serial protocol");
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Juha Yrjölä");
---- a/drivers/cbus/cbus.h
-+++ b/drivers/cbus/cbus.h
-@@ -27,4 +27,6 @@ extern int cbus_read_reg(struct device *
- extern int cbus_write_reg(struct device *, unsigned dev, unsigned reg,
- 		unsigned val);
- 
-+void cbus_emergency(void) __noreturn;
-+
- #endif /* __DRIVERS_CBUS_CBUS_H */
---- a/drivers/cbus/retu.c
-+++ b/drivers/cbus/retu.c
-@@ -399,6 +399,11 @@ static int retu_allocate_children(struct
- 	if (!child)
- 		return -ENOMEM;
- 
-+	child = retu_allocate_child("retu-n810bm", parent, irq_base,
-+			RETU_INT_ADCS, -1, 1);
-+	if (!child)
-+		return -ENOMEM;
-+
- 	return 0;
- }
- 
---- a/drivers/cbus/tahvo.c
-+++ b/drivers/cbus/tahvo.c
-@@ -129,6 +129,7 @@ void tahvo_set_clear_reg_bits(struct dev
- 	__tahvo_write_reg(tahvo, reg, w);
- 	mutex_unlock(&tahvo->mutex);
- }
-+EXPORT_SYMBOL(tahvo_set_clear_reg_bits);
- 
- static irqreturn_t tahvo_irq_handler(int irq, void *_tahvo)
- {
-@@ -292,6 +293,11 @@ static int tahvo_allocate_children(struc
- 	if (!child)
- 		return -ENOMEM;
- 
-+	child = tahvo_allocate_child("tahvo-n810bm", parent,
-+				     irq_base + TAHVO_INT_BATCURR);
-+	if (!child)
-+		return -ENOMEM;
-+
- 	return 0;
- }
- 
diff --git a/target/linux/omap24xx/patches-3.3/910-omap-fix-section-mismatch-warnings.patch b/target/linux/omap24xx/patches-3.3/910-omap-fix-section-mismatch-warnings.patch
deleted file mode 100644
index a7772be4d2..0000000000
--- a/target/linux/omap24xx/patches-3.3/910-omap-fix-section-mismatch-warnings.patch
+++ /dev/null
@@ -1,116 +0,0 @@
---- a/arch/arm/plat-omap/omap_device.c
-+++ b/arch/arm/plat-omap/omap_device.c
-@@ -619,7 +619,7 @@ static void omap_device_delete(struct om
-  * information.  Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
-  * passes along the return value of omap_device_build_ss().
-  */
--struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
-+struct platform_device *__init omap_device_build(const char *pdev_name, int pdev_id,
- 				      struct omap_hwmod *oh, void *pdata,
- 				      int pdata_len,
- 				      struct omap_device_pm_latency *pm_lats,
-@@ -652,7 +652,7 @@ struct platform_device *omap_device_buil
-  * platform_device record.  Returns an ERR_PTR() on error, or passes
-  * along the return value of omap_device_register().
-  */
--struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
-+struct platform_device *__init omap_device_build_ss(const char *pdev_name, int pdev_id,
- 					 struct omap_hwmod **ohs, int oh_cnt,
- 					 void *pdata, int pdata_len,
- 					 struct omap_device_pm_latency *pm_lats,
-@@ -717,7 +717,7 @@ odbs_exit:
-  * platform_early_add_device() on the underlying platform_device.
-  * Returns 0 by default.
-  */
--static int omap_early_device_register(struct platform_device *pdev)
-+static int __init omap_early_device_register(struct platform_device *pdev)
- {
- 	struct platform_device *devices[1];
- 
---- a/arch/arm/plat-omap/common.c
-+++ b/arch/arm/plat-omap/common.c
-@@ -29,7 +29,7 @@
- 
- #define NO_LENGTH_CHECK 0xffffffff
- 
--struct omap_board_config_kernel *omap_board_config __initdata;
-+struct omap_board_config_kernel *omap_board_config;
- int omap_board_config_size;
- 
- unsigned char omap_bootloader_tag[1024];
-@@ -58,7 +58,7 @@ __tagtable(ATAG_BOARD, parse_tag_omap);
- 
- #endif
- 
--static const void *__init get_config(u16 tag, size_t len,
-+static const void *get_config(u16 tag, size_t len,
- 		int skip, size_t *len_out)
- {
- 	struct omap_board_config_kernel *kinfo = NULL;
-@@ -125,12 +125,12 @@ static const void *__init get_config(u16
- 	return kinfo->data;
- }
- 
--const void *__init __omap_get_config(u16 tag, size_t len, int nr)
-+const void *__omap_get_config(u16 tag, size_t len, int nr)
- {
-         return get_config(tag, len, nr, NULL);
- }
- 
--const void *__init omap_get_var_config(u16 tag, size_t *len)
-+const void *omap_get_var_config(u16 tag, size_t *len)
- {
-         return get_config(tag, NO_LENGTH_CHECK, 0, len);
- }
---- a/arch/arm/mach-omap2/devices.c
-+++ b/arch/arm/mach-omap2/devices.c
-@@ -380,7 +380,7 @@ static inline void omap_init_dmic(void)
- 
- #include <plat/mcspi.h>
- 
--static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
-+static int __init omap_mcspi_init(struct omap_hwmod *oh, void *unused)
- {
- 	struct platform_device *pdev;
- 	char *name = "omap2_mcspi";
---- a/arch/arm/mach-omap2/gpio.c
-+++ b/arch/arm/mach-omap2/gpio.c
-@@ -24,7 +24,7 @@
- #include <plat/omap_hwmod.h>
- #include <plat/omap_device.h>
- 
--static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
-+static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
- {
- 	struct platform_device *pdev;
- 	struct omap_gpio_platform_data *pdata;
---- a/arch/arm/mach-omap2/mcbsp.c
-+++ b/arch/arm/mach-omap2/mcbsp.c
-@@ -122,7 +122,7 @@ static int omap3_enable_st_clock(unsigne
- 	return 0;
- }
- 
--static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
-+static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
- {
- 	int id, count = 1;
- 	char *name = "omap-mcbsp";
---- a/arch/arm/plat-omap/include/plat/board.h
-+++ b/arch/arm/plat-omap/include/plat/board.h
-@@ -159,14 +159,14 @@ struct omap_gpio_switch_config {
- 	int key_code:24; /* Linux key code */
- };
- 
--extern const void *__init __omap_get_config(u16 tag, size_t len, int nr);
-+extern const void * __omap_get_config(u16 tag, size_t len, int nr);
- 
- #define omap_get_config(tag, type) \
- 	((const type *) __omap_get_config((tag), sizeof(type), 0))
- #define omap_get_nr_config(tag, type, nr) \
- 	((const type *) __omap_get_config((tag), sizeof(type), (nr)))
- 
--extern const void *__init omap_get_var_config(u16 tag, size_t *len);
-+extern const void * omap_get_var_config(u16 tag, size_t *len);
- 
- extern struct omap_board_config_kernel *omap_board_config;
- extern int omap_board_config_size;
diff --git a/target/linux/omap24xx/profiles/100-n810.mk b/target/linux/omap24xx/profiles/100-n810.mk
deleted file mode 100644
index 36f30866d0..0000000000
--- a/target/linux/omap24xx/profiles/100-n810.mk
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# Copyright (C) 2010-2011 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/n810-base
-  NAME:=Nokia n810 (base)
-  PACKAGES:= \
-	block-mount \
-	gpsd \
-	ip iw kmod-p54-spi wpa-supplicant \
-	dnsmasq dropbear \
-	pwrtray-backend \
-	kmod-fs-vfat kmod-fs-msdos \
-	kmod-input-evdev \
-	kmod-leds-gpio \
-	kmod-usb-tahvo kmod-usb-eth-gadget \
-	kmod-usb-net kmod-usb-net-cdc-ether kmod-usb-net-pegasus kmod-usb-net-rndis \
-	kmod-usb-storage kmod-usb-hid \
-	kmod-bluetooth kmod-bluetooth-hci-h4p bluez-utils bluez-hcidump \
-	kmod-n810bm maemo-kexec calvaria \
-	schedtool
-endef
-
-define Profile/n810-base/Description
-	Minimal package set for Nokia n810 hardware.
-endef
-$(eval $(call Profile,n810-base))
-
diff --git a/target/linux/omap24xx/profiles/110-n810-gui.mk b/target/linux/omap24xx/profiles/110-n810-gui.mk
deleted file mode 100644
index 9c3c5d025a..0000000000
--- a/target/linux/omap24xx/profiles/110-n810-gui.mk
+++ /dev/null
@@ -1,22 +0,0 @@
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/n810-gui
-  $(call Profile/n810-base)
-  NAME:=Nokia n810 (GUI)
-  PACKAGES+= \
-	xserver-xorg xinit xauth xkeyboard-config xkbdata xterm \
-	xf86-video-omapfb xf86-input-tslib xf86-input-evdev \
-	openbox tint2 matchbox-keyboard \
-	pwrtray
-endef
-
-define Profile/n810-gui/Description
-	Graphical user interface package set for Nokia n810 hardware.
-endef
-$(eval $(call Profile,n810-gui))
-