omap24xx: Add 3.1 patchset.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28672 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 1937 insertions, 0 deletions

diff --git a/target/linux/omap24xx/patches-3.1/900-n810-battery-management.patch b/target/linux/omap24xx/patches-3.1/900-n810-battery-management.patch
new file mode 100644
index 0000000000..4c4e46e2b2
--- /dev/null
+++ b/target/linux/omap24xx/patches-3.1/900-n810-battery-management.patch
@@ -0,0 +1,1937 @@
+Index: linux-3.1-rc4/drivers/cbus/Kconfig
+===================================================================
+--- linux-3.1-rc4.orig/drivers/cbus/Kconfig	2011-10-29 20:45:09.000000000 +0200
++++ linux-3.1-rc4/drivers/cbus/Kconfig	2011-10-29 20:46:00.683428775 +0200
+@@ -83,4 +83,12 @@ config CBUS_RETU_HEADSET
+ 
+ endif # CBUS_RETU
+ 
++config N810BM
++	depends on CBUS_RETU && CBUS_TAHVO
++	tristate "Nokia n810 battery management"
++	---help---
++	  Nokia n810 device battery management.
++
++	  If unsure, say N.
++
+ endmenu
+Index: linux-3.1-rc4/drivers/cbus/Makefile
+===================================================================
+--- linux-3.1-rc4.orig/drivers/cbus/Makefile	2011-10-29 20:45:09.000000000 +0200
++++ linux-3.1-rc4/drivers/cbus/Makefile	2011-10-29 20:46:00.683428775 +0200
+@@ -11,3 +11,6 @@ obj-$(CONFIG_CBUS_RETU_POWERBUTTON) += r
+ obj-$(CONFIG_CBUS_RETU_RTC)	+= retu-rtc.o
+ obj-$(CONFIG_CBUS_RETU_WDT)	+= retu-wdt.o
+ obj-$(CONFIG_CBUS_RETU_HEADSET)	+= retu-headset.o
++n810bm-y			+= n810bm_main.o
++n810bm-y			+= lipocharge.o
++obj-$(CONFIG_N810BM)		+= n810bm.o
+Index: linux-3.1-rc4/drivers/cbus/n810bm_main.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-3.1-rc4/drivers/cbus/n810bm_main.c	2011-10-29 20:46:00.683428775 +0200
+@@ -0,0 +1,1586 @@
++/*
++ *   Nokia n810 battery management
++ *
++ *   WARNING: This driver is based on unconfirmed documentation.
++ *            It is possibly dangerous to use this software.
++ *            Use this software at your own risk!
++ *
++ *   Copyright (c) 2010-2011 Michael Buesch <mb@bu3sch.de>
++ *
++ *   This program is free software; you can redistribute it and/or
++ *   modify it under the terms of the GNU General Public License
++ *   as published by the Free Software Foundation; either version 2
++ *   of the License, or (at your option) any later version.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ */
++
++#define DEBUG
++
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/slab.h>
++#include <linux/mutex.h>
++#include <linux/timer.h>
++#include <linux/firmware.h>
++#include <linux/bitops.h>
++#include <linux/workqueue.h>
++#include <linux/delay.h>
++
++#include "cbus.h"
++#include "retu.h"
++#include "tahvo.h"
++#include "lipocharge.h"
++
++
++#define N810BM_PMM_BLOCK_FILENAME	"n810-cal-bme-pmm.fw"
++#define N810BM_PMM_BLOCK_SIZE		0x600
++#define N810BM_PMM_GROUP_SIZE		0x200
++#define N810BM_PMM_ELEM_SIZE		0x10
++
++#define N810BM_CHECK_INTERVAL		(HZ * 2)
++#define N810BM_MIN_VOLTAGE_THRES	3200 /* Absolute minimum voltage threshold */
++
++
++/* RETU_ADC_BSI
++ * The battery size indicator ADC measures the resistance between
++ * the battery BSI pin and ground. This is used to detect the battery
++ * capacity, as the BSI resistor is related to capacity.
++ *
++ * Manually measured lookup table.
++ * Hard to measure, thus not very accurate.
++ *
++ * Resistance  |  ADC value
++ * ========================
++ * 120k        |  0x3AC
++ * 110k        |  0x37C
++ * 100k        |  0x351
++ *  90k        |  0x329
++ */
++
++/* RETU_ADC_BATTVOLT
++ * Manually measured lookup table.
++ * Hard to measure, thus not very accurate.
++ *
++ * Voltage  |  ADC value
++ * =====================
++ * 2.80V    |  0x037
++ * 2.90V    |  0x05E
++ * 3.00V    |  0x090
++ * 3.10V    |  0x0A4
++ * 3.20V    |  0x0CC
++ * 3.30V    |  0x0EF
++ * 3.40V    |  0x115
++ * 3.50V    |  0x136
++ * 3.60V    |  0x15C
++ * 3.70V    |  0x187
++ * 3.80V    |  0x1A5
++ * 3.90V    |  0x1C9
++ * 4.00V    |  0x1ED
++ * 4.10V    |  0x212
++ * 4.20V    |  0x236
++ */
++
++
++/* PMM block ADC IDs */
++enum n810bm_pmm_adc_id {
++	N810BM_PMM_ADC_BATVOLT		= 0x01,	/* Battery voltage */
++	N810BM_PMM_ADC_CHGVOLT		= 0x02,	/* Charger voltage */
++	N810BM_PMM_ADC_GND2		= 0x03,	/* Ground 0V */
++	N810BM_PMM_ADC_BSI		= 0x04,	/* Battery size indicator */
++	N810BM_PMM_ADC_BATTEMP		= 0x05,	/* Battery temperature */
++	N810BM_PMM_ADC_HEADSET		= 0x06,	/* Headset detection */
++	N810BM_PMM_ADC_HOOKDET		= 0x07,	/* Hook detection */
++	N810BM_PMM_ADC_LIGHTSENS	= 0x08,	/* Light sensor */
++	N810BM_PMM_ADC_BATCURR		= 0x0E,	/* Battery current */
++	N810BM_PMM_ADC_BKUPVOLT		= 0x13,	/* Backup battery voltage */
++	N810BM_PMM_ADC_LIGHTTEMP	= 0x14,	/* Light sensor temperature */
++	N810BM_PMM_ADC_RFGP		= 0x15,	/* RF GP */
++	N810BM_PMM_ADC_WBTX		= 0x16,	/* Wideband TX detection */
++	N810BM_PMM_ADC_RETUTEMP		= 0x17,	/* RETU chip temperature */
++	N810BM_PMM_ADC_0xFE		= 0xFE,
++};
++
++struct n810bm_adc_calib {
++	enum n810bm_pmm_adc_id id;
++	u8 flags;
++	u8 adc_groupnr;
++	u32 field1;
++	u32 field2;
++	u16 field3;
++	u16 field4;
++};
++
++struct n810bm_calib {
++	struct n810bm_adc_calib adc[25];
++};
++
++enum n810bm_capacity {
++	N810BM_CAP_UNKNOWN	= -1,
++	N810BM_CAP_NONE		= 0,
++	N810BM_CAP_1500MAH	= 1500,	/* 1500 mAh battery */
++};
++
++enum n810bm_notify_flags {
++	N810BM_NOTIFY_charger_present,
++	N810BM_NOTIFY_charger_state,
++	N810BM_NOTIFY_charger_pwm,
++};
++
++struct n810bm {
++	bool battery_present;			/* A battery is inserted */
++	bool charger_present;			/* The charger is connected */
++	enum n810bm_capacity capacity;		/* The capacity of the inserted battery (if any) */
++
++	bool charger_enabled;			/* Want to charge? */
++	struct lipocharge charger;		/* Charger subsystem */
++	unsigned int active_current_pwm;	/* Active value of TAHVO_REG_CHGCURR */
++	int current_measure_enabled;		/* Current measure enable refcount */
++
++	struct platform_device *pdev;
++	struct n810bm_calib calib;		/* Calibration data */
++
++	bool verbose_charge_log;		/* Verbose charge logging */
++
++	unsigned long notify_flags;
++	struct work_struct notify_work;
++	struct work_struct currmeas_irq_work;
++	struct delayed_work periodic_check_work;
++
++	bool initialized;			/* The hardware was initialized */
++	struct mutex mutex;
++};
++
++static void n810bm_notify_charger_present(struct n810bm *bm);
++static void n810bm_notify_charger_state(struct n810bm *bm);
++static void n810bm_notify_charger_pwm(struct n810bm *bm);
++
++
++static struct platform_device *n810bm_retu_device;
++static struct platform_device *n810bm_tahvo_device;
++
++
++static inline struct n810bm * device_to_n810bm(struct device *dev)
++{
++	struct platform_device *pdev = to_platform_device(dev);
++	struct n810bm *bm = platform_get_drvdata(pdev);
++
++	return bm;
++}
++
++static inline bool n810bm_known_battery_present(struct n810bm *bm)
++{
++	return bm->battery_present &&
++	       bm->capacity != N810BM_CAP_UNKNOWN &&
++	       bm->capacity != N810BM_CAP_NONE;
++}
++
++static NORET_TYPE void n810bm_emergency(struct n810bm *bm, const char *message) ATTRIB_NORET;
++static void n810bm_emergency(struct n810bm *bm, const char *message)
++{
++	printk(KERN_EMERG "n810 battery management fatal fault: %s\n", message);
++	cbus_emergency();
++}
++
++static u16 tahvo_read(struct n810bm *bm, unsigned int reg)
++{
++	return tahvo_read_reg(reg);
++}
++
++static void tahvo_maskset(struct n810bm *bm, unsigned int reg, u16 mask, u16 set)
++{
++	tahvo_set_clear_reg_bits(reg, set, mask);
++}
++
++static inline void tahvo_write(struct n810bm *bm, unsigned int reg, u16 value)
++{
++	unsigned long flags;
++
++	spin_lock_irqsave(&tahvo_lock, flags);
++	tahvo_write_reg(reg, value);
++	spin_unlock_irqrestore(&tahvo_lock, flags);
++}
++
++static inline void tahvo_set(struct n810bm *bm, unsigned int reg, u16 mask)
++{
++	tahvo_set_clear_reg_bits(reg, mask, mask);
++}
++
++static inline void tahvo_clear(struct n810bm *bm, unsigned int reg, u16 mask)
++{
++	tahvo_set_clear_reg_bits(reg, 0, mask);
++}
++
++static u16 retu_read(struct n810bm *bm, unsigned int reg)
++{
++	return retu_read_reg(&n810bm_retu_device->dev, reg);
++}
++
++static void retu_maskset(struct n810bm *bm, unsigned int reg, u16 mask, u16 set)
++{
++	retu_set_clear_reg_bits(&n810bm_retu_device->dev, reg, set, mask);
++}
++
++static inline void retu_write(struct n810bm *bm, unsigned int reg, u16 value)
++{
++	retu_write_reg(&n810bm_retu_device->dev, reg, value);
++}
++
++static int retu_adc_average(struct n810bm *bm, unsigned int chan,
++			    unsigned int nr_passes)
++{
++	unsigned int i, value = 0;
++	int ret;
++
++	if (WARN_ON(!nr_passes))
++		return 0;
++	for (i = 0; i < nr_passes; i++) {
++		ret = retu_read_adc(&n810bm_retu_device->dev, chan);
++		if (ret < 0)
++			return ret;
++		value += ret;
++	}
++	value /= nr_passes;
++
++	return value;
++}
++
++static struct n810bm_adc_calib * n810bm_get_adc_calib(struct n810bm *bm,
++						enum n810bm_pmm_adc_id id)
++{
++	unsigned int index = 0;
++	struct n810bm_adc_calib *cal;
++
++	if (id != N810BM_PMM_ADC_0xFE)
++		index = (unsigned int)id + 1;
++	if (index >= ARRAY_SIZE(bm->calib.adc))
++		return NULL;
++
++	cal = &bm->calib.adc[index];
++	WARN_ON(cal->id && cal->id != id);
++
++	return cal;
++}
++
++static int pmm_record_get(struct n810bm *bm,
++			  const struct firmware *pmm_block,
++			  void *buffer, size_t length,
++			  unsigned int group, unsigned int element, unsigned int offset)
++{
++	const u8 *pmm_area = pmm_block->data;
++	u8 active_group_mask;
++
++	if (pmm_block->size != N810BM_PMM_BLOCK_SIZE)
++		return -EINVAL;
++	if (group >= N810BM_PMM_BLOCK_SIZE / N810BM_PMM_GROUP_SIZE)
++		return -EINVAL;
++	if (element >= N810BM_PMM_GROUP_SIZE / N810BM_PMM_ELEM_SIZE)
++		return -EINVAL;
++	if (offset >= N810BM_PMM_ELEM_SIZE || length > N810BM_PMM_ELEM_SIZE ||
++	    length + offset > N810BM_PMM_ELEM_SIZE)
++		return -EINVAL;
++
++	active_group_mask = pmm_area[16];
++	if (!(active_group_mask & (1 << group))) {
++		dev_dbg(&bm->pdev->dev, "pwm_record_get: Requested group %u, "
++			"but group is not active", group);
++		return -ENOENT;
++	}
++
++	memcpy(buffer,
++	       pmm_area + group * N810BM_PMM_GROUP_SIZE
++			+ element * N810BM_PMM_ELEM_SIZE
++			+ offset,
++	       length);
++
++	return 0;
++}
++
++/* PMM block group 1 element */
++struct group1_element {
++	u8 id;
++	u8 flags;
++	u8 adc_groupnr;
++	u8 _padding;
++	__le32 field1;
++	__le32 field2;
++} __packed;
++
++static int extract_group1_elem(struct n810bm *bm,
++			       const struct firmware *pmm_block,
++			       const enum n810bm_pmm_adc_id *pmm_adc_ids, size_t nr_pmm_adc_ids,
++			       u32 field1_mask, u32 field2_mask)
++{
++	struct group1_element elem;
++	int err;
++	unsigned int i, element_nr;
++	struct n810bm_adc_calib *adc_calib;
++
++	for (i = 0; i < nr_pmm_adc_ids; i++) {
++		element_nr = (unsigned int)(pmm_adc_ids[i]) + 3;
++
++		err = pmm_record_get(bm, pmm_block, &elem, sizeof(elem),
++				     1, element_nr, 0);
++		if (err)
++			continue;
++		adc_calib = n810bm_get_adc_calib(bm, elem.id);
++		if (!adc_calib) {
++			dev_err(&bm->pdev->dev, "extract_group1_elem: "
++				"Could not get calib element for 0x%02X",
++				elem.id);
++			return -EINVAL;
++		}
++
++		if (adc_calib->flags == elem.flags) {
++			adc_calib->field1 = le32_to_cpu(elem.field1) & field1_mask;
++			adc_calib->field2 = le32_to_cpu(elem.field2) & field2_mask;
++		} else {
++			dev_dbg(&bm->pdev->dev, "extract_group1_elem: "
++				"Not extracting fields due to flags mismatch: "
++				"0x%02X vs 0x%02X",
++				adc_calib->flags, elem.flags);
++		}
++	}
++
++	return 0;
++}
++
++static int n810bm_parse_pmm_group1(struct n810bm *bm,
++				   const struct firmware *pmm_block)
++{
++	struct n810bm_adc_calib *adc_calib;
++	struct group1_element elem;
++	int err;
++
++	static const enum n810bm_pmm_adc_id pmm_adc_ids_1[] = {
++		N810BM_PMM_ADC_BATVOLT,
++		N810BM_PMM_ADC_CHGVOLT,
++		N810BM_PMM_ADC_BKUPVOLT,
++		N810BM_PMM_ADC_BATCURR,
++	};
++	static const enum n810bm_pmm_adc_id pmm_adc_ids_2[] = {
++		N810BM_PMM_ADC_BSI,
++	};
++	static const enum n810bm_pmm_adc_id pmm_adc_ids_3[] = {
++		N810BM_PMM_ADC_BATTEMP,
++	};
++
++	/* Parse element 2 */
++	err = pmm_record_get(bm, pmm_block, &elem, sizeof(elem),
++			     1, 2, 0);
++	if (err) {
++		dev_err(&bm->pdev->dev,
++			"PMM: Failed to get group 1 / element 2");
++		return err;
++	}
++	if (elem.id == N810BM_PMM_ADC_0xFE && elem.flags == 0x05) {
++		adc_calib = n810bm_get_adc_calib(bm, elem.id);
++		if (!adc_calib) {
++			dev_err(&bm->pdev->dev,
++				"calib extract: Failed to get 0xFE calib");
++			return -EINVAL;
++		}
++		adc_calib->id = elem.id;
++		adc_calib->flags = elem.flags;
++		adc_calib->field1 = le32_to_cpu(elem.field1);
++		adc_calib->field2 = le32_to_cpu(elem.field2);
++	}
++
++	err = extract_group1_elem(bm, pmm_block,
++				  pmm_adc_ids_1, ARRAY_SIZE(pmm_adc_ids_1),
++				  0xFFFFFFFF, 0xFFFFFFFF);
++	if (err)
++		return err;
++	err = extract_group1_elem(bm, pmm_block,
++				  pmm_adc_ids_2, ARRAY_SIZE(pmm_adc_ids_2),
++				  0xFFFFFFFF, 0);
++	if (err)
++		return err;
++	err = extract_group1_elem(bm, pmm_block,
++				  pmm_adc_ids_3, ARRAY_SIZE(pmm_adc_ids_3),
++				  0xFFFFFFFF, 0x0000FFFF);
++	if (err)
++		return err;
++
++	return 0;
++}
++
++static int n810bm_parse_pmm_group2(struct n810bm *bm,
++				   const struct firmware *pmm_block)
++{
++	dev_err(&bm->pdev->dev, "TODO: CAL BME PMM group 2 parser not implemented, yet");
++	return -EOPNOTSUPP;
++}
++
++static void n810bm_adc_calib_set_defaults(struct n810bm *bm)
++{
++	struct n810bm_adc_calib *adc_calib;
++	unsigned int i;
++
++	static const struct n810bm_adc_calib defaults[] = {
++		/* ADC group-nr 0 */
++		{
++			.id		= N810BM_PMM_ADC_HEADSET,
++			.flags		= 0x00,
++			.adc_groupnr	= 0,
++		}, {
++			.id		= N810BM_PMM_ADC_HOOKDET,
++			.flags		= 0x00,
++			.adc_groupnr	= 0,
++		}, {
++			.id		= N810BM_PMM_ADC_RFGP,
++			.flags		= 0x00,
++			.adc_groupnr	= 0,
++		}, {
++			.id		= N810BM_PMM_ADC_LIGHTSENS,
++			.flags		= 0x00,
++			.adc_groupnr	= 0,
++		}, {
++			.id		= N810BM_PMM_ADC_WBTX,
++			.flags		= 0x00,
++			.adc_groupnr	= 0,
++		}, {
++			.id		= N810BM_PMM_ADC_RETUTEMP,
++			.flags		= 0x00,
++			.adc_groupnr	= 0,
++		}, {
++			.id		= N810BM_PMM_ADC_GND2,
++			.flags		= 0x00,
++			.adc_groupnr	= 0,
++		},
++		/* ADC group-nr 1 */
++		{
++			.id		= N810BM_PMM_ADC_0xFE,
++			.flags		= 0x05,
++			.adc_groupnr	= 1,
++			.field1		= (u32)-2,
++			.field2		= 13189,
++		}, {
++			.id		= N810BM_PMM_ADC_BATVOLT,
++			.flags		= 0x01,
++			.adc_groupnr	= 1,
++			.field1		= 2527,
++			.field2		= 21373,
++		}, {
++			.id		= N810BM_PMM_ADC_CHGVOLT,
++			.flags		= 0x01,
++			.adc_groupnr	= 1,
++			.field1		= 0,
++			.field2		= 129848,
++		}, {
++			.id		= N810BM_PMM_ADC_BKUPVOLT,
++			.flags		= 0x01,
++			.adc_groupnr	= 1,
++			.field1		= 0,
++			.field2		= 20000,
++		}, {
++			.id		= N810BM_PMM_ADC_BATCURR,
++			.flags		= 0x06,
++			.adc_groupnr	= 1,
++			.field1		= 0,
++			.field2		= 9660,
++		},
++		/* ADC group-nr 2 */
++		{
++			.id		= N810BM_PMM_ADC_BSI,
++			.flags		= 0x02,
++			.adc_groupnr	= 2,
++			.field1		= 1169,
++			.field2		= 0,
++		},
++		/* ADC group-nr 3 */
++		{
++			.id		= N810BM_PMM_ADC_BATTEMP,
++			.flags		= 0x03,
++			.adc_groupnr	= 3,
++			.field1		= 265423000,
++			.field2		= 298,
++		},
++		/* ADC group-nr 4 */
++		{
++			.id		= N810BM_PMM_ADC_LIGHTTEMP,
++			.flags		= 0x04,
++			.adc_groupnr	= 4,
++			.field1		= 19533778,
++			.field2		= 308019670,
++			.field3		= 4700,
++			.field4		= 2500,
++		},
++	};
++
++	/* Clear the array */
++	memset(&bm->calib.adc, 0, sizeof(bm->calib.adc));
++	for (i = 0; i < ARRAY_SIZE(bm->calib.adc); i++)
++		bm->calib.adc[i].flags = 0xFF;
++
++	/* Copy the defaults */
++	for (i = 0; i < ARRAY_SIZE(defaults); i++) {
++		adc_calib = n810bm_get_adc_calib(bm, defaults[i].id);
++		if (WARN_ON(!adc_calib))
++			continue;
++		*adc_calib = defaults[i];
++	}
++}
++
++static int n810bm_parse_pmm_block(struct n810bm *bm,
++				  const struct firmware *pmm_block)
++{
++	u8 byte;
++	int err;
++	unsigned int i, count;
++	struct n810bm_adc_calib *adc_calib;
++
++	/* Initialize to defaults */
++	n810bm_adc_calib_set_defaults(bm);
++
++	/* Parse the PMM data */
++	err = pmm_record_get(bm, pmm_block, &byte, sizeof(byte),
++			     1, 0, 0); /* group 1 / element 0 */
++	err |= (byte != 0x01);
++	err |= pmm_record_get(bm, pmm_block, &byte, sizeof(byte),
++			      1, 1, 0); /* group 1 / element 1 */
++	err |= (byte != 0x01);
++	if (err)
++		err = n810bm_parse_pmm_group2(bm, pmm_block);
++	else
++		err = n810bm_parse_pmm_group1(bm, pmm_block);
++	if (err)
++		return err;
++
++	/* Sanity checks */
++	for (i = 0, count = 0; i < ARRAY_SIZE(bm->calib.adc); i++) {
++		adc_calib = &bm->calib.adc[i];
++		if (adc_calib->flags == 0xFF)
++			continue;
++		switch (adc_calib->id) {
++		case N810BM_PMM_ADC_BATVOLT:
++			if (adc_calib->field1 < 2400 ||
++			    adc_calib->field1 > 2700)
++				goto value_check_fail;
++			if (adc_calib->field2 < 20000 ||
++			    adc_calib->field2 > 23000)
++				goto value_check_fail;
++			count++;
++			break;
++		case N810BM_PMM_ADC_BSI:
++			if (adc_calib->field1 < 1100 ||
++			    adc_calib->field1 > 1300)
++				goto value_check_fail;
++			count++;
++			break;
++		case N810BM_PMM_ADC_BATCURR:
++			if (adc_calib->field2 < 7000 ||
++			    adc_calib->field2 > 12000)
++				goto value_check_fail;
++			count++;
++			break;
++		case N810BM_PMM_ADC_0xFE:
++			if ((s32)adc_calib->field1 > 14 ||
++			    (s32)adc_calib->field1 < -14)
++				goto value_check_fail;
++			if (adc_calib->field2 < 13000 ||
++			    adc_calib->field2 > 13350)
++				goto value_check_fail;
++			count++;
++			break;
++		case N810BM_PMM_ADC_CHGVOLT:
++		case N810BM_PMM_ADC_BATTEMP:
++		case N810BM_PMM_ADC_BKUPVOLT:
++			count++;
++			break;
++		case N810BM_PMM_ADC_GND2:
++		case N810BM_PMM_ADC_HOOKDET:
++		case N810BM_PMM_ADC_LIGHTSENS:
++		case N810BM_PMM_ADC_HEADSET:
++		case N810BM_PMM_ADC_LIGHTTEMP:
++		case N810BM_PMM_ADC_RFGP:
++		case N810BM_PMM_ADC_WBTX:
++		case N810BM_PMM_ADC_RETUTEMP:
++			break;
++		}
++		dev_dbg(&bm->pdev->dev,
++			"ADC 0x%02X calib: 0x%02X 0x%02X 0x%08X 0x%08X 0x%04X 0x%04X",
++			adc_calib->id, adc_calib->flags, adc_calib->adc_groupnr,
++			adc_calib->field1, adc_calib->field2,
++			adc_calib->field3, adc_calib->field4);
++	}
++	if (count != 7) {
++		dev_err(&bm->pdev->dev, "PMM sanity check: Did not find "
++			"all required values (count=%u)", count);
++		goto check_fail;
++	}
++
++	return 0;
++
++value_check_fail:
++	dev_err(&bm->pdev->dev, "PMM image sanity check failed "
++		"(id=%02X, field1=%08X, field2=%08X)",
++		adc_calib->id, adc_calib->field1, adc_calib->field2);
++check_fail:
++	return -EILSEQ;
++}
++
++/* Set the current measure timer that triggers on Tahvo IRQ 7
++ * An interval of zero disables the timer. */
++static void n810bm_set_current_measure_timer(struct n810bm *bm,
++					     u16 millisec_interval)
++{
++	u16 value = millisec_interval;
++
++	if (value <= 0xF905) {
++		value = ((u64)0x10624DD3 * (u64)(value + 0xF9)) >> 32;
++		value /= 16;
++	} else
++		value = 0xFF;
++
++	tahvo_write(bm, TAHVO_REG_BATCURRTIMER, value & 0xFF);
++
++	tahvo_set(bm, TAHVO_REG_CHGCTL,
++		  TAHVO_REG_CHGCTL_CURTIMRST);
++	tahvo_clear(bm, TAHVO_REG_CHGCTL,
++		    TAHVO_REG_CHGCTL_CURTIMRST);
++
++	if (millisec_interval)
++		tahvo_enable_irq(TAHVO_INT_BATCURR);
++	else
++		tahvo_disable_irq(TAHVO_INT_BATCURR);
++
++	//TODO also do a software timer for safety.
++}
++
++static void n810bm_enable_current_measure(struct n810bm *bm)
++{
++	WARN_ON(bm->current_measure_enabled < 0);
++	if (!bm->current_measure_enabled) {
++		/* Enable the current measurement circuitry */
++		tahvo_set(bm, TAHVO_REG_CHGCTL,
++			  TAHVO_REG_CHGCTL_CURMEAS);
++		dev_dbg(&bm->pdev->dev,
++			"Current measurement circuitry enabled");
++	}
++	bm->current_measure_enabled++;
++}
++
++static void n810bm_disable_current_measure(struct n810bm *bm)
++{
++	bm->current_measure_enabled--;
++	WARN_ON(bm->current_measure_enabled < 0);
++	if (!bm->current_measure_enabled) {
++		/* Disable the current measurement circuitry */
++		tahvo_clear(bm, TAHVO_REG_CHGCTL,
++			    TAHVO_REG_CHGCTL_CURMEAS);
++		dev_dbg(&bm->pdev->dev,
++			"Current measurement circuitry disabled");
++	}
++}
++
++/* Measure the actual battery current. Returns a signed value in mA.
++ * Does only work, if current measurement was enabled. */
++static int n810bm_measure_batt_current(struct n810bm *bm)
++{
++	u16 retval;
++	int adc = 0, ma, i;
++
++	if (WARN_ON(bm->current_measure_enabled <= 0))
++		return 0;
++	for (i = 0; i < 3; i++) {
++		retval = tahvo_read(bm, TAHVO_REG_BATCURR);
++		adc += (s16)retval; /* Value is signed */
++	}
++	adc /= 3;
++
++	//TODO convert to mA
++	ma = adc;
++
++	return ma;
++}
++
++/* Requires bm->mutex locked */
++static int n810bm_measure_batt_current_async(struct n810bm *bm)
++{
++	int ma;
++	bool charging = lipocharge_is_charging(&bm->charger);
++
++	n810bm_enable_current_measure(bm);
++	if (!charging)
++		WARN_ON(bm->active_current_pwm != 0);
++	tahvo_maskset(bm, TAHVO_REG_CHGCTL,
++		      TAHVO_REG_CHGCTL_EN |
++		      TAHVO_REG_CHGCTL_PWMOVR |
++		      TAHVO_REG_CHGCTL_PWMOVRZERO,
++		      TAHVO_REG_CHGCTL_EN |
++		      TAHVO_REG_CHGCTL_PWMOVR |
++		      (charging ? 0 : TAHVO_REG_CHGCTL_PWMOVRZERO));
++	ma = n810bm_measure_batt_current(bm);
++	tahvo_maskset(bm, TAHVO_REG_CHGCTL,
++		      TAHVO_REG_CHGCTL_EN |
++		      TAHVO_REG_CHGCTL_PWMOVR |
++		      TAHVO_REG_CHGCTL_PWMOVRZERO,
++		      (charging ? TAHVO_REG_CHGCTL_EN : 0));
++	n810bm_disable_current_measure(bm);
++
++	return ma;
++}
++
++static int adc_sanity_check(struct n810bm *bm, unsigned int channel)
++{
++	int value;
++
++	value = retu_read_adc(&n810bm_retu_device->dev, channel);
++	if (value < 0) {
++		dev_err(&bm->pdev->dev, "Failed to read GND ADC channel %u",
++			channel);
++		return -EIO;
++	}
++	dev_dbg(&bm->pdev->dev,
++		"GND ADC channel %u sanity check got value: %d",
++		channel, value);
++	if (value > 5) {
++		n810bm_emergency(bm, "GND ADC sanity check failed");
++		return -EIO;
++	}
++
++	return 0;
++}
++
++static int n810bm_check_adc_sanity(struct n810bm *bm)
++{
++	int err;
++
++	/* Discard one conversion */
++	retu_write(bm, RETU_REG_ADCSCR, 0);
++	retu_read_adc(&n810bm_retu_device->dev, RETU_ADC_GND2);
++
++	err = adc_sanity_check(bm, RETU_ADC_GND2);
++	if (err)
++		return err;
++
++	return 0;
++}
++
++/* Measure the battery voltage. Returns the value in mV (or negative value on error). */
++static int n810bm_measure_batt_voltage(struct n810bm *bm)
++{
++	int adc;
++	unsigned int mv;
++	const unsigned int scale = 1000;
++
++	adc = retu_adc_average(bm, RETU_ADC_BATTVOLT, 5);
++	if (adc < 0)
++		return adc;
++	if (adc <= 0x37)
++		return 2800;
++	mv = 2800 + ((adc - 0x37) * (((4200 - 2800) * scale) / (0x236 - 0x37))) / scale;
++
++	//TODO compensate for power consumption
++	//TODO honor calibration values
++
++	return mv;
++}
++
++/* Measure the charger voltage. Returns the value in mV (or negative value on error). */
++static int n810bm_measure_charger_voltage(struct n810bm *bm)
++{
++	int adc;
++	unsigned int mv;
++
++	adc = retu_adc_average(bm, RETU_ADC_CHGVOLT, 5);
++	if (adc < 0)
++		return adc;
++	//TODO convert to mV
++	mv = adc;
++
++	return mv;
++}
++
++/* Measure backup battery voltage. Returns the value in mV (or negative value on error). */
++static int n810bm_measure_backup_batt_voltage(struct n810bm *bm)
++{
++	int adc;
++	unsigned int mv;
++
++	adc = retu_adc_average(bm, RETU_ADC_BKUPVOLT, 3);
++	if (adc < 0)
++		return adc;
++	//TODO convert to mV
++	mv = adc;
++
++	return mv;
++}
++
++/* Measure the battery temperature. Returns the value in K (or negative value on error). */
++static int n810bm_measure_batt_temp(struct n810bm *bm)
++{
++	int adc;
++	unsigned int k;
++
++	adc = retu_adc_average(bm, RETU_ADC_BATTEMP, 3);
++	if (adc < 0)
++		return adc;
++	//TODO convert to K
++	k = adc;
++
++	return k;
++}
++
++/* Read the battery capacity via BSI pin. */
++static enum n810bm_capacity n810bm_read_batt_capacity(struct n810bm *bm)
++{
++	int adc;
++	const unsigned int hyst = 20;
++
++	adc = retu_adc_average(bm, RETU_ADC_BSI, 5);
++	if (adc < 0) {
++		dev_err(&bm->pdev->dev, "Failed to read BSI ADC");
++		return N810BM_CAP_UNKNOWN;
++	}
++
++	if (adc >= 0x3B5 - hyst && adc <= 0x3B5 + hyst)
++		return N810BM_CAP_1500MAH;
++
++	dev_err(&bm->pdev->dev, "Capacity indicator 0x%X unknown", adc);
++
++	return N810BM_CAP_UNKNOWN;
++}
++
++/* Convert a battery voltage (in mV) to percentage. */
++static unsigned int n810bm_mvolt2percent(unsigned int mv)
++{
++	const unsigned int minv = 3700;
++	const unsigned int maxv = 4150;
++	unsigned int percent;
++
++	mv = clamp(mv, minv, maxv);
++	percent = (mv - minv) * 100 / (maxv - minv);
++
++	return percent;
++}
++
++static void n810bm_start_charge(struct n810bm *bm)
++{
++	int err;
++
++	WARN_ON(!bm->battery_present);
++	WARN_ON(!bm->charger_present);
++
++	/* Set PWM to zero */
++	bm->active_current_pwm = 0;
++	tahvo_write(bm, TAHVO_REG_CHGCURR, bm->active_current_pwm);
++
++	/* Charge global enable */
++	tahvo_maskset(bm, TAHVO_REG_CHGCTL,
++		      TAHVO_REG_CHGCTL_EN |
++		      TAHVO_REG_CHGCTL_PWMOVR |
++		      TAHVO_REG_CHGCTL_PWMOVRZERO,
++		      TAHVO_REG_CHGCTL_EN);
++
++	WARN_ON((int)bm->capacity <= 0);
++	bm->charger.capacity = bm->capacity;
++	err = lipocharge_start(&bm->charger);
++	WARN_ON(err);
++
++	/* Initialize current measurement circuitry */
++	n810bm_enable_current_measure(bm);
++	n810bm_set_current_measure_timer(bm, 250);
++
++	dev_info(&bm->pdev->dev, "Charging battery");
++	n810bm_notify_charger_state(bm);
++	n810bm_notify_charger_pwm(bm);
++}
++
++static void n810bm_stop_charge(struct n810bm *bm)
++{
++	if (lipocharge_is_charging(&bm->charger)) {
++		n810bm_set_current_measure_timer(bm, 0);
++		n810bm_disable_current_measure(bm);
++	}
++	lipocharge_stop(&bm->charger);
++
++	/* Set PWM to zero */
++	bm->active_current_pwm = 0;
++	tahvo_write(bm, TAHVO_REG_CHGCURR, bm->active_current_pwm);
++
++	/* Charge global disable */
++	tahvo_maskset(bm, TAHVO_REG_CHGCTL,
++		      TAHVO_REG_CHGCTL_EN |
++		      TAHVO_REG_CHGCTL_PWMOVR |
++		      TAHVO_REG_CHGCTL_PWMOVRZERO,
++		      0);
++
++	dev_info(&bm->pdev->dev, "Not charging battery");
++	n810bm_notify_charger_state(bm);
++	n810bm_notify_charger_pwm(bm);
++}
++
++/* Periodic check */
++static void n810bm_periodic_check_work(struct work_struct *work)
++{
++	struct n810bm *bm = container_of(to_delayed_work(work),
++					 struct n810bm, periodic_check_work);
++	u16 status;
++	bool battery_was_present, charger_was_present;
++	int mv;
++
++	mutex_lock(&bm->mutex);
++
++	status = retu_read(bm, RETU_REG_STATUS);
++	battery_was_present = bm->battery_present;
++	charger_was_present = bm->charger_present;
++	bm->battery_present = !!(status & RETU_REG_STATUS_BATAVAIL);
++	bm->charger_present = !!(status & RETU_REG_STATUS_CHGPLUG);
++
++	if (bm->battery_present != battery_was_present) {
++		/* Battery state changed */
++		if (bm->battery_present) {
++			bm->capacity = n810bm_read_batt_capacity(bm);
++			if (bm->capacity == N810BM_CAP_UNKNOWN) {
++				dev_err(&bm->pdev->dev, "Unknown battery detected");
++			} else {
++				dev_info(&bm->pdev->dev, "Detected %u mAh battery",
++					 (unsigned int)bm->capacity);
++			}
++		} else {
++			bm->capacity = N810BM_CAP_NONE;
++			dev_info(&bm->pdev->dev, "The main battery was removed");
++			//TODO disable charging
++		}
++	}
++
++	if (bm->charger_present != charger_was_present) {
++		/* Charger state changed */
++		dev_info(&bm->pdev->dev, "The charger was %s",
++			 bm->charger_present ? "plugged in" : "removed");
++		n810bm_notify_charger_present(bm);
++	}
++
++	if ((bm->battery_present && !bm->charger_present) ||
++	    !n810bm_known_battery_present(bm)){
++		/* We're draining the battery */
++		mv = n810bm_measure_batt_voltage(bm);
++		if (mv < 0) {
++			n810bm_emergency(bm,
++				"check: Failed to measure voltage");
++		}
++		if (mv < N810BM_MIN_VOLTAGE_THRES) {
++			n810bm_emergency(bm,
++				"check: Minimum voltage threshold reached");
++		}
++	}
++
++	if (bm->charger_present && n810bm_known_battery_present(bm)) {
++		/* Known battery and charger are connected */
++		if (bm->charger_enabled) {
++			/* Charger is enabled */
++			if (!lipocharge_is_charging(&bm->charger)) {
++				//TODO start charging, if battery is below some threshold
++				n810bm_start_charge(bm);
++			}
++		}
++	}
++
++	if (lipocharge_is_charging(&bm->charger) && !bm->charger_present) {
++		/* Charger was unplugged. */
++		n810bm_stop_charge(bm);
++	}
++
++	mutex_unlock(&bm->mutex);
++	schedule_delayed_work(&bm->periodic_check_work,
++			      round_jiffies_relative(N810BM_CHECK_INTERVAL));
++}
++
++/*XXX
++static void n810bm_adc_irq_handler(unsigned long data)
++{
++	struct n810bm *bm = (struct n810bm *)data;
++
++	retu_ack_irq(RETU_INT_ADCS);
++	//TODO
++dev_info(&bm->pdev->dev, "ADC interrupt triggered\n");
++}
++*/
++
++static void n810bm_tahvo_current_measure_work(struct work_struct *work)
++{
++	struct n810bm *bm = container_of(work, struct n810bm, currmeas_irq_work);
++	int res, ma, mv, temp;
++
++	mutex_lock(&bm->mutex);
++	if (!lipocharge_is_charging(&bm->charger))
++		goto out_unlock;
++
++	tahvo_maskset(bm, TAHVO_REG_CHGCTL,
++		      TAHVO_REG_CHGCTL_PWMOVR |
++		      TAHVO_REG_CHGCTL_PWMOVRZERO,
++		      TAHVO_REG_CHGCTL_PWMOVR);
++	ma = n810bm_measure_batt_current(bm);
++	tahvo_maskset(bm, TAHVO_REG_CHGCTL,
++		      TAHVO_REG_CHGCTL_PWMOVR |
++		      TAHVO_REG_CHGCTL_PWMOVRZERO,
++		      TAHVO_REG_CHGCTL_PWMOVR |
++		      TAHVO_REG_CHGCTL_PWMOVRZERO);
++	msleep(10);
++	mv = n810bm_measure_batt_voltage(bm);
++	tahvo_maskset(bm, TAHVO_REG_CHGCTL,
++		      TAHVO_REG_CHGCTL_PWMOVR |
++		      TAHVO_REG_CHGCTL_PWMOVRZERO,
++		      0);
++	temp = n810bm_measure_batt_temp(bm);
++	if (WARN_ON(mv < 0))
++		goto out_unlock;
++	if (WARN_ON(temp < 0))
++		goto out_unlock;
++
++	if (bm->verbose_charge_log) {
++		dev_info(&bm->pdev->dev,
++			 "Battery charge state: %d mV, %d mA (%s)",
++			 mv, ma,
++			 (ma <= 0) ? "discharging" : "charging");
++	}
++	res = lipocharge_update_state(&bm->charger, mv, ma, temp);
++	if (res) {
++		if (res > 0)
++			dev_info(&bm->pdev->dev, "Battery fully charged");
++		n810bm_stop_charge(bm);
++	}
++out_unlock:
++	mutex_unlock(&bm->mutex);
++}
++
++static void n810bm_tahvo_current_measure_irq_handler(unsigned long data)
++{
++	struct n810bm *bm = (struct n810bm *)data;
++
++	tahvo_ack_irq(TAHVO_INT_BATCURR);
++	schedule_work(&bm->currmeas_irq_work);
++}
++
++#define DEFINE_ATTR_NOTIFY(attr_name)						\
++	void n810bm_notify_##attr_name(struct n810bm *bm)			\
++	{									\
++		set_bit(N810BM_NOTIFY_##attr_name, &bm->notify_flags);		\
++		wmb();								\
++		schedule_work(&bm->notify_work);				\
++	}
++
++#define DEFINE_SHOW_INT_FUNC(name, member)					\
++	static ssize_t n810bm_attr_##name##_show(struct device *dev,		\
++						 struct device_attribute *attr,	\
++						 char *buf)			\
++	{									\
++		struct n810bm *bm = device_to_n810bm(dev);			\
++		ssize_t count;							\
++										\
++		mutex_lock(&bm->mutex);						\
++		count = snprintf(buf, PAGE_SIZE, "%d\n", (int)(bm->member));	\
++		mutex_unlock(&bm->mutex);					\
++										\
++		return count;							\
++	}
++
++#define DEFINE_STORE_INT_FUNC(name, member)					\
++	static ssize_t n810bm_attr_##name##_store(struct device *dev,		\
++						  struct device_attribute *attr,\
++						  const char *buf, size_t count)\
++	{									\
++		struct n810bm *bm = device_to_n810bm(dev);			\
++		long val;							\
++		int err;							\
++										\
++		mutex_lock(&bm->mutex);						\
++		err = strict_strtol(buf, 0, &val);				\
++		if (!err)							\
++			bm->member = (typeof(bm->member))val;			\
++		mutex_unlock(&bm->mutex);					\
++										\
++		return err ? err : count;					\
++	}
++
++#define DEFINE_ATTR_SHOW_INT(name, member)					\
++	DEFINE_SHOW_INT_FUNC(name, member)					\
++	static DEVICE_ATTR(name, S_IRUGO,					\
++			   n810bm_attr_##name##_show, NULL);
++
++#define DEFINE_ATTR_SHOW_STORE_INT(name, member)				\
++	DEFINE_SHOW_INT_FUNC(name, member)					\
++	DEFINE_STORE_INT_FUNC(name, member)					\
++	static DEVICE_ATTR(name, S_IRUGO | S_IWUSR,				\
++			   n810bm_attr_##name##_show,				\
++			   n810bm_attr_##name##_store);
++
++DEFINE_ATTR_SHOW_INT(battery_present, battery_present);
++DEFINE_ATTR_SHOW_INT(charger_present, charger_present);
++static DEFINE_ATTR_NOTIFY(charger_present);
++DEFINE_ATTR_SHOW_INT(charger_state, charger.state);
++static DEFINE_ATTR_NOTIFY(charger_state);
++DEFINE_ATTR_SHOW_INT(charger_pwm, active_current_pwm);
++static DEFINE_ATTR_NOTIFY(charger_pwm);
++DEFINE_ATTR_SHOW_STORE_INT(charger_enable, charger_enabled);
++DEFINE_ATTR_SHOW_STORE_INT(charger_verbose, verbose_charge_log);
++
++static ssize_t n810bm_attr_battery_level_show(struct device *dev,
++					      struct device_attribute *attr,
++					      char *buf)
++{
++	struct n810bm *bm = device_to_n810bm(dev);
++	ssize_t count = -ENODEV;
++	int millivolt;
++
++	mutex_lock(&bm->mutex);
++	if (!bm->battery_present || lipocharge_is_charging(&bm->charger))
++		millivolt = 0;
++	else
++		millivolt = n810bm_measure_batt_voltage(bm);
++	if (millivolt >= 0) {
++		count = snprintf(buf, PAGE_SIZE, "%u\n",
++				 n810bm_mvolt2percent(millivolt));
++	}
++	mutex_unlock(&bm->mutex);
++
++	return count;
++}
++static DEVICE_ATTR(battery_level, S_IRUGO,
++		   n810bm_attr_battery_level_show, NULL);
++
++static ssize_t n810bm_attr_battery_capacity_show(struct device *dev,
++						 struct device_attribute *attr,
++						 char *buf)
++{
++	struct n810bm *bm = device_to_n810bm(dev);
++	ssize_t count;
++	int capacity = 0;
++
++	mutex_lock(&bm->mutex);
++	if (n810bm_known_battery_present(bm))
++		capacity = (int)bm->capacity;
++	count = snprintf(buf, PAGE_SIZE, "%d\n", capacity);
++	mutex_unlock(&bm->mutex);
++
++	return count;
++}
++static DEVICE_ATTR(battery_capacity, S_IRUGO,
++		   n810bm_attr_battery_capacity_show, NULL);
++
++static ssize_t n810bm_attr_battery_temp_show(struct device *dev,
++					     struct device_attribute *attr,
++					     char *buf)
++{
++	struct n810bm *bm = device_to_n810bm(dev);
++	ssize_t count = -ENODEV;
++	int k;
++
++	mutex_lock(&bm->mutex);
++	k = n810bm_measure_batt_temp(bm);
++	if (k >= 0)
++		count = snprintf(buf, PAGE_SIZE, "%d\n", k);
++	mutex_unlock(&bm->mutex);
++
++	return count;
++}
++static DEVICE_ATTR(battery_temp, S_IRUGO,
++		   n810bm_attr_battery_temp_show, NULL);
++
++static ssize_t n810bm_attr_charger_voltage_show(struct device *dev,
++						struct device_attribute *attr,
++						char *buf)
++{
++	struct n810bm *bm = device_to_n810bm(dev);
++	ssize_t count = -ENODEV;
++	int mv = 0;
++
++	mutex_lock(&bm->mutex);
++	if (bm->charger_present)
++		mv = n810bm_measure_charger_voltage(bm);
++	if (mv >= 0)
++		count = snprintf(buf, PAGE_SIZE, "%d\n", mv);
++	mutex_unlock(&bm->mutex);
++
++	return count;
++}
++static DEVICE_ATTR(charger_voltage, S_IRUGO,
++		   n810bm_attr_charger_voltage_show, NULL);
++
++static ssize_t n810bm_attr_backup_battery_voltage_show(struct device *dev,
++						       struct device_attribute *attr,
++						       char *buf)
++{
++	struct n810bm *bm = device_to_n810bm(dev);
++	ssize_t count = -ENODEV;
++	int mv;
++
++	mutex_lock(&bm->mutex);
++	mv = n810bm_measure_backup_batt_voltage(bm);
++	if (mv >= 0)
++		count = snprintf(buf, PAGE_SIZE, "%d\n", mv);
++	mutex_unlock(&bm->mutex);
++
++	return count;
++}
++static DEVICE_ATTR(backup_battery_voltage, S_IRUGO,
++		   n810bm_attr_backup_battery_voltage_show, NULL);
++
++static ssize_t n810bm_attr_battery_current_show(struct device *dev,
++						struct device_attribute *attr,
++						char *buf)
++{
++	struct n810bm *bm = device_to_n810bm(dev);
++	ssize_t count = -ENODEV;
++	int ma = 0;
++
++	mutex_lock(&bm->mutex);
++	if (bm->battery_present)
++		ma = n810bm_measure_batt_current_async(bm);
++	count = snprintf(buf, PAGE_SIZE, "%d\n", ma);
++	mutex_unlock(&bm->mutex);
++
++	return count;
++}
++static DEVICE_ATTR(battery_current, S_IRUGO,
++		   n810bm_attr_battery_current_show, NULL);
++
++static const struct device_attribute *n810bm_attrs[] = {
++	&dev_attr_battery_present,
++	&dev_attr_battery_level,
++	&dev_attr_battery_current,
++	&dev_attr_battery_capacity,
++	&dev_attr_battery_temp,
++	&dev_attr_backup_battery_voltage,
++	&dev_attr_charger_present,
++	&dev_attr_charger_state,
++	&dev_attr_charger_verbose,
++	&dev_attr_charger_voltage,
++	&dev_attr_charger_enable,
++	&dev_attr_charger_pwm,
++};
++
++static void n810bm_notify_work(struct work_struct *work)
++{
++	struct n810bm *bm = container_of(work, struct n810bm, notify_work);
++	unsigned long notify_flags;
++
++	notify_flags = xchg(&bm->notify_flags, 0);
++	mb();
++
++#define do_notify(attr_name)						\
++	do {								\
++		if (notify_flags & (1 << N810BM_NOTIFY_##attr_name)) {	\
++			sysfs_notify(&bm->pdev->dev.kobj, NULL,		\
++				     dev_attr_##attr_name.attr.name);	\
++		}							\
++	} while (0)
++
++	do_notify(charger_present);
++	do_notify(charger_state);
++	do_notify(charger_pwm);
++}
++
++static int n810bm_charger_set_current_pwm(struct lipocharge *c,
++					  unsigned int duty_cycle)
++{
++	struct n810bm *bm = container_of(c, struct n810bm, charger);
++	int err = -EINVAL;
++
++	WARN_ON(!mutex_is_locked(&bm->mutex));
++	if (WARN_ON(duty_cycle > 0xFF))
++		goto out;
++	if (WARN_ON(!bm->charger_enabled))
++		goto out;
++	if (WARN_ON(!bm->battery_present || !bm->charger_present))
++		goto out;
++
++	if (duty_cycle != bm->active_current_pwm) {
++		bm->active_current_pwm = duty_cycle;
++		tahvo_write(bm, TAHVO_REG_CHGCURR, duty_cycle);
++		n810bm_notify_charger_pwm(bm);
++	}
++
++	err = 0;
++out:
++
++	return err;
++}
++
++static void n810bm_charger_emergency(struct lipocharge *c)
++{
++	struct n810bm *bm = container_of(c, struct n810bm, charger);
++
++	n810bm_emergency(bm, "Battery charger fault");
++}
++
++static void n810bm_hw_exit(struct n810bm *bm)
++{
++	n810bm_stop_charge(bm);
++	retu_write(bm, RETU_REG_ADCSCR, 0);
++}
++
++static int n810bm_hw_init(struct n810bm *bm)
++{
++	int err;
++
++	err = n810bm_check_adc_sanity(bm);
++	if (err)
++		return err;
++
++	n810bm_stop_charge(bm);
++
++	return 0;
++}
++
++static void n810bm_cancel_and_flush_work(struct n810bm *bm)
++{
++	cancel_delayed_work_sync(&bm->periodic_check_work);
++	cancel_work_sync(&bm->notify_work);
++	cancel_work_sync(&bm->currmeas_irq_work);
++	flush_scheduled_work();
++}
++
++static int n810bm_device_init(struct n810bm *bm)
++{
++	int attr_index;
++	int err;
++
++	bm->charger.rate = LIPORATE_p6C;
++	bm->charger.top_voltage = 4100;
++	bm->charger.duty_cycle_max = 0xFF;
++	bm->charger.set_current_pwm = n810bm_charger_set_current_pwm;
++	bm->charger.emergency = n810bm_charger_emergency;
++	lipocharge_init(&bm->charger, &bm->pdev->dev);
++
++	err = n810bm_hw_init(bm);
++	if (err)
++		goto error;
++	for (attr_index = 0; attr_index < ARRAY_SIZE(n810bm_attrs); attr_index++) {
++		err = device_create_file(&bm->pdev->dev, n810bm_attrs[attr_index]);
++		if (err)
++			goto err_unwind_attrs;
++	}
++/*XXX
++	err = retu_request_irq(RETU_INT_ADCS,
++			       n810bm_adc_irq_handler,
++			       (unsigned long)bm, "n810bm");
++	if (err)
++		goto err_unwind_attrs;
++*/
++	err = tahvo_request_irq(TAHVO_INT_BATCURR,
++				n810bm_tahvo_current_measure_irq_handler,
++				(unsigned long)bm, "n810bm");
++	if (err)
++		goto err_free_retu_irq;
++	tahvo_disable_irq(TAHVO_INT_BATCURR);
++
++	schedule_delayed_work(&bm->periodic_check_work,
++			      round_jiffies_relative(N810BM_CHECK_INTERVAL));
++
++	bm->initialized = 1;
++	dev_info(&bm->pdev->dev, "Battery management initialized");
++
++	return 0;
++
++err_free_retu_irq:
++//XXX	retu_free_irq(RETU_INT_ADCS);
++err_unwind_attrs:
++	for (attr_index--; attr_index >= 0; attr_index--)
++		device_remove_file(&bm->pdev->dev, n810bm_attrs[attr_index]);
++/*err_exit:*/
++	n810bm_hw_exit(bm);
++error:
++	n810bm_cancel_and_flush_work(bm);
++
++	return err;
++}
++
++static void n810bm_device_exit(struct n810bm *bm)
++{
++	int i;
++
++	if (!bm->initialized)
++		return;
++
++	lipocharge_exit(&bm->charger);
++	tahvo_free_irq(TAHVO_INT_BATCURR);
++//XXX	retu_free_irq(RETU_INT_ADCS);
++	for (i = 0; i < ARRAY_SIZE(n810bm_attrs); i++)
++		device_remove_file(&bm->pdev->dev, n810bm_attrs[i]);
++
++	n810bm_cancel_and_flush_work(bm);
++
++	n810bm_hw_exit(bm);
++
++	bm->initialized = 0;
++}
++
++static void n810bm_pmm_block_found(const struct firmware *fw, void *context)
++{
++	struct n810bm *bm = context;
++	int err;
++
++	if (!fw) {
++		dev_err(&bm->pdev->dev,
++			"CAL PMM block image file not found");
++		goto err_release;
++	}
++	if (fw->size != N810BM_PMM_BLOCK_SIZE ||
++	    memcmp(fw->data, "BME-PMM-BLOCK01", 15) != 0) {
++		dev_err(&bm->pdev->dev,
++			"CAL PMM block image file has an invalid format");
++		goto err_release;
++	}
++
++	err = n810bm_parse_pmm_block(bm, fw);
++	if (err)
++		goto err_release;
++	release_firmware(fw);
++
++	err = n810bm_device_init(bm);
++	if (err) {
++		dev_err(&bm->pdev->dev,
++			"Failed to initialized battery management (%d)", err);
++		goto error;
++	}
++
++	return;
++err_release:
++	release_firmware(fw);
++error:
++	return;
++}
++
++static int __devinit n810bm_probe(void)
++{
++	struct n810bm *bm;
++	int err;
++
++	if (!n810bm_retu_device || !n810bm_tahvo_device)
++		return 0;
++
++	bm = kzalloc(sizeof(*bm), GFP_KERNEL);
++	if (!bm)
++		return -ENOMEM;
++	bm->pdev = n810bm_retu_device;
++	platform_set_drvdata(n810bm_retu_device, bm);
++	platform_set_drvdata(n810bm_tahvo_device, bm);
++	mutex_init(&bm->mutex);
++	INIT_DELAYED_WORK(&bm->periodic_check_work, n810bm_periodic_check_work);
++	INIT_WORK(&bm->notify_work, n810bm_notify_work);
++	INIT_WORK(&bm->currmeas_irq_work, n810bm_tahvo_current_measure_work);
++
++	dev_info(&bm->pdev->dev, "Requesting CAL BME PMM block firmware file "
++		 N810BM_PMM_BLOCK_FILENAME);
++	err = request_firmware_nowait(THIS_MODULE, 1,
++				      N810BM_PMM_BLOCK_FILENAME,
++				      &bm->pdev->dev, GFP_KERNEL,
++				      bm, n810bm_pmm_block_found);
++	if (err) {
++		dev_err(&bm->pdev->dev,
++			"Failed to request CAL PMM block image file (%d)", err);
++		goto err_free;
++	}
++
++	return 0;
++
++err_free:
++	kfree(bm);
++
++	return err;
++}
++
++static void __devexit n810bm_remove(void)
++{
++	struct n810bm *bm;
++
++	if (!n810bm_retu_device || !n810bm_tahvo_device)
++		return;
++	bm = platform_get_drvdata(n810bm_retu_device);
++
++	n810bm_device_exit(bm);
++
++	kfree(bm);
++	platform_set_drvdata(n810bm_retu_device, NULL);
++	platform_set_drvdata(n810bm_tahvo_device, NULL);
++}
++
++static int __devinit n810bm_retu_probe(struct platform_device *pdev)
++{
++	n810bm_retu_device = pdev;
++	return n810bm_probe();
++}
++
++static int __devexit n810bm_retu_remove(struct platform_device *pdev)
++{
++	n810bm_remove();
++	n810bm_retu_device = NULL;
++	return 0;
++}
++
++static int __devinit n810bm_tahvo_probe(struct platform_device *pdev)
++{
++	n810bm_tahvo_device = pdev;
++	return n810bm_probe();
++}
++
++static int __devexit n810bm_tahvo_remove(struct platform_device *pdev)
++{
++	n810bm_remove();
++	n810bm_tahvo_device = NULL;
++	return 0;
++}
++
++static struct platform_driver n810bm_retu_driver = {
++	.remove		= __devexit_p(n810bm_retu_remove),
++	.driver		= {
++		.name	= "retu-n810bm",
++	}
++};
++
++static struct platform_driver n810bm_tahvo_driver = {
++	.remove		= __devexit_p(n810bm_tahvo_remove),
++	.driver		= {
++		.name	= "tahvo-n810bm",
++	}
++};
++
++/* FIXME: for now alloc the device here... */
++static struct platform_device n810bm_tahvo_dev = {
++	.name	= "tahvo-n810bm",
++	.id	= -1,
++};
++
++static int __init n810bm_modinit(void)
++{
++	int err;
++
++	//FIXME
++	err = platform_device_register(&n810bm_tahvo_dev);
++	if (err)
++		return err;
++
++	err = platform_driver_probe(&n810bm_retu_driver, n810bm_retu_probe);
++	if (err)
++		return err;
++	err = platform_driver_probe(&n810bm_tahvo_driver, n810bm_tahvo_probe);
++	if (err) {
++		platform_driver_unregister(&n810bm_retu_driver);
++		return err;
++	}
++
++	return 0;
++}
++module_init(n810bm_modinit);
++
++static void __exit n810bm_modexit(void)
++{
++	//FIXME
++	platform_device_unregister(&n810bm_tahvo_dev);
++
++	platform_driver_unregister(&n810bm_tahvo_driver);
++	platform_driver_unregister(&n810bm_retu_driver);
++}
++module_exit(n810bm_modexit);
++
++MODULE_DESCRIPTION("Nokia n810 battery management");
++MODULE_FIRMWARE(N810BM_PMM_BLOCK_FILENAME);
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Michael Buesch");
+Index: linux-3.1-rc4/drivers/cbus/lipocharge.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-3.1-rc4/drivers/cbus/lipocharge.c	2011-10-29 20:46:00.683428775 +0200
+@@ -0,0 +1,183 @@
++/*
++ *   Generic LIPO battery charger
++ *
++ *   Copyright (c) 2010-2011 Michael Buesch <mb@bu3sch.de>
++ *
++ *   This program is free software; you can redistribute it and/or
++ *   modify it under the terms of the GNU General Public License
++ *   as published by the Free Software Foundation; either version 2
++ *   of the License, or (at your option) any later version.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ */
++
++#define DEBUG
++
++#include "lipocharge.h"
++
++#include <linux/slab.h>
++
++
++/* Hysteresis constants */
++#define CURRENT_HYST		30 /* mA */
++#define VOLTAGE_HYST		10 /* mV */
++
++/* Threshold constants */
++#define FINISH_CURRENT_PERCENT	3
++
++
++/* Returns the requested first-stage charge current in mA */
++static inline unsigned int get_stage1_charge_current(struct lipocharge *c)
++{
++	/* current = (capacity * C) */
++	return c->capacity * c->rate / 1000;
++}
++
++void lipocharge_init(struct lipocharge *c, struct device *dev)
++{
++	c->dev = dev;
++	c->state = LIPO_IDLE;
++}
++
++void lipocharge_exit(struct lipocharge *c)
++{
++	c->state = LIPO_IDLE;
++}
++
++int lipocharge_start(struct lipocharge *c)
++{
++	int err;
++
++	if (c->state != LIPO_IDLE)
++		return -EBUSY;
++	if (!c->set_current_pwm || !c->emergency)
++		return -EINVAL;
++	if (!c->top_voltage || c->top_voltage > 4200)
++		return -EINVAL;
++
++	c->active_duty_cycle = 0;
++	err = c->set_current_pwm(c, c->active_duty_cycle);
++	if (err)
++		return err;
++	c->state = LIPO_FIRST_STAGE;
++
++	return 0;
++}
++
++void lipocharge_stop(struct lipocharge *c)
++{
++	if (c->state == LIPO_IDLE)
++		return;
++	c->state = LIPO_IDLE;
++}
++
++static int lipocharge_increase_current(struct lipocharge *c,
++				       unsigned int inc_permille)
++{
++	int old_pwm, new_pwm;
++
++	if (c->active_duty_cycle >= c->duty_cycle_max)
++		return 0;
++
++	old_pwm = c->active_duty_cycle;
++	new_pwm = old_pwm + (c->duty_cycle_max * inc_permille / 1000);
++	new_pwm = min(new_pwm, (int)c->duty_cycle_max);
++	c->active_duty_cycle = new_pwm;
++
++	dev_dbg(c->dev, "lipo: Increasing duty_cycle by "
++		"%u permille (0x%02X -> 0x%02X)",
++		inc_permille, old_pwm, new_pwm);
++
++	return c->set_current_pwm(c, c->active_duty_cycle);
++}
++
++static int lipocharge_decrease_current(struct lipocharge *c,
++				       unsigned int dec_permille)
++{
++	int old_pwm, new_pwm;
++
++	if (c->active_duty_cycle <= 0)
++		return 0;
++
++	old_pwm = c->active_duty_cycle;
++	new_pwm = old_pwm - (c->duty_cycle_max * dec_permille / 1000);
++	new_pwm = max(0, new_pwm);
++	c->active_duty_cycle = new_pwm;
++
++	dev_dbg(c->dev, "lipo: Decreasing duty_cycle by "
++		"%u permille (0x%02X -> 0x%02X)",
++		dec_permille, old_pwm, new_pwm);
++
++	return c->set_current_pwm(c, c->active_duty_cycle);
++}
++
++/** lipocharge_update_state - Update the charge state
++ * @c: The context.
++ * @voltage_mV: The measured battery voltage.
++ * @current_mA: The measured charge current.
++ *		negative -> drain.
++ *		positive -> charge.
++ * @temp_K: Battery temperature in K.
++ *
++ * Returns 0 on success, -1 on error.
++ * Returns 1, if the charging process is finished.
++ */
++int lipocharge_update_state(struct lipocharge *c,
++			    unsigned int voltage_mV,
++			    int current_mA,
++			    unsigned int temp_K)
++{
++	int requested_current, current_diff;
++	int err;
++	unsigned int permille;
++
++	//TODO temp
++
++restart:
++	switch (c->state) {
++	case LIPO_IDLE:
++		dev_err(c->dev, "%s: called while idle", __func__);
++		return -EINVAL;
++	case LIPO_FIRST_STAGE:	/* Constant current */
++//printk("GOT %u %d %u\n", voltage_mV, current_mA, temp_K);
++		if (voltage_mV >= c->top_voltage) {
++			/* Float voltage reached.
++			 * Switch charger mode to "constant current" */
++			c->state = LIPO_SECOND_STAGE;
++			dev_dbg(c->dev, "Switched to second charging stage.");
++			goto restart;
++		}
++		/* Float voltage not reached, yet.
++		 * Try to get the requested constant current. */
++		requested_current = get_stage1_charge_current(c);
++		if (current_mA < 0)
++			current_mA = 0;
++		current_diff = requested_current - current_mA;
++		if (abs(requested_current - current_mA) > CURRENT_HYST) {
++			if (current_diff > 0) {
++				/* Increase current */
++				permille = current_diff * 1000 / requested_current;
++				permille /= 2;
++				err = lipocharge_increase_current(c, permille);
++				if (err)
++					return err;
++			} else {
++				/* Decrease current */
++				permille = (-current_diff) * 1000 / requested_current;
++				permille /= 2;
++				err = lipocharge_decrease_current(c, permille);
++				if (err)
++					return err;
++			}
++		}
++		break;
++	case LIPO_SECOND_STAGE:	/* Constant voltage */
++		//TODO
++		break;
++	}
++
++	return 0;
++}
+Index: linux-3.1-rc4/drivers/cbus/lipocharge.h
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-3.1-rc4/drivers/cbus/lipocharge.h	2011-10-29 20:46:00.683428775 +0200
+@@ -0,0 +1,60 @@
++#ifndef LIPOCHARGE_H_
++#define LIPOCHARGE_H_
++
++#include <linux/types.h>
++#include <linux/device.h>
++
++
++#define LIPORATE(a,b)	(((a) * 1000) + ((b) * 100))
++#define LIPORATE_p6C	LIPORATE(0,6)	/* 0.6C */
++
++enum lipocharge_state {
++	LIPO_IDLE = 0,		/* Not charging */
++	LIPO_FIRST_STAGE,	/* Charging: constant current */
++	LIPO_SECOND_STAGE,	/* Charging: constant voltage */
++};
++
++/** struct lipocharge - A generic LIPO charger
++ *
++ * @capacity: Battery capacity in mAh.
++ * @rate: Charge rate.
++ * @top_voltage: Fully charged voltage, in mV.
++ * @duty_cycle_max: Max value for duty_cycle.
++ *
++ * @set_charge_current: Set the charge current PWM duty cycle.
++ * @emergency: Something went wrong. Force shutdown.
++ */
++struct lipocharge {
++	unsigned int capacity;
++	unsigned int rate;
++	unsigned int top_voltage;
++	unsigned int duty_cycle_max;
++
++	int (*set_current_pwm)(struct lipocharge *c, unsigned int duty_cycle);
++	void (*emergency)(struct lipocharge *c);
++
++	/* internal */
++	struct device *dev;
++	enum lipocharge_state state;
++	unsigned int active_duty_cycle;
++
++	//TODO implement timer to cut power after maximum charge time.
++};
++
++void lipocharge_init(struct lipocharge *c, struct device *dev);
++void lipocharge_exit(struct lipocharge *c);
++
++int lipocharge_start(struct lipocharge *c);
++void lipocharge_stop(struct lipocharge *c);
++
++int lipocharge_update_state(struct lipocharge *c,
++			    unsigned int voltage_mV,
++			    int current_mA,
++			    unsigned int temp_K);
++
++static inline bool lipocharge_is_charging(struct lipocharge *c)
++{
++	return (c->state != LIPO_IDLE);
++}
++
++#endif /* LIPOCHARGE_H_ */
+Index: linux-3.1-rc4/drivers/cbus/cbus.c
+===================================================================
+--- linux-3.1-rc4.orig/drivers/cbus/cbus.c	2011-10-29 20:45:47.000000000 +0200
++++ linux-3.1-rc4/drivers/cbus/cbus.c	2011-10-29 20:46:23.875375085 +0200
+@@ -34,6 +34,7 @@
+ #include <linux/gpio.h>
+ #include <linux/platform_device.h>
+ #include <plat/cbus.h>
++#include <linux/reboot.h>
+ 
+ #include "cbus.h"
+ 
+@@ -324,6 +325,13 @@ static void __exit cbus_bus_exit(void)
+ }
+ module_exit(cbus_bus_exit);
+ 
++void cbus_emergency(void)
++{
++	machine_power_off();
++	panic("cbus: Failed to halt machine in emergency state\n");
++}
++EXPORT_SYMBOL(cbus_emergency);
++
+ MODULE_DESCRIPTION("CBUS serial protocol");
+ MODULE_LICENSE("GPL");
+ MODULE_AUTHOR("Juha Yrjölä");
+Index: linux-3.1-rc4/drivers/cbus/cbus.h
+===================================================================
+--- linux-3.1-rc4.orig/drivers/cbus/cbus.h	2011-10-29 20:45:09.000000000 +0200
++++ linux-3.1-rc4/drivers/cbus/cbus.h	2011-10-29 20:46:00.683428775 +0200
+@@ -27,4 +27,6 @@ extern int cbus_read_reg(struct device *
+ extern int cbus_write_reg(struct device *, unsigned dev, unsigned reg,
+ 		unsigned val);
+ 
++NORET_TYPE void cbus_emergency(void) ATTRIB_NORET;
++
+ #endif /* __DRIVERS_CBUS_CBUS_H */
+Index: linux-3.1-rc4/drivers/cbus/retu.c
+===================================================================
+--- linux-3.1-rc4.orig/drivers/cbus/retu.c	2011-10-29 20:45:09.000000000 +0200
++++ linux-3.1-rc4/drivers/cbus/retu.c	2011-10-29 20:46:00.683428775 +0200
+@@ -417,6 +417,11 @@ static int retu_allocate_children(struct
+ 	if (!child)
+ 		return -ENOMEM;
+ 
++	child = retu_allocate_child("retu-n810bm", parent, irq_base,
++			RETU_INT_ADCS, -1, 1);
++	if (!child)
++		return -ENOMEM;
++
+ 	return 0;
+ }
+ 
+Index: linux-3.1-rc4/drivers/cbus/tahvo.c
+===================================================================
+--- linux-3.1-rc4.orig/drivers/cbus/tahvo.c	2011-10-29 20:45:09.000000000 +0200
++++ linux-3.1-rc4/drivers/cbus/tahvo.c	2011-10-29 20:46:00.683428775 +0200
+@@ -129,6 +129,7 @@ void tahvo_set_clear_reg_bits(struct dev
+ 	__tahvo_write_reg(tahvo, reg, w);
+ 	mutex_unlock(&tahvo->mutex);
+ }
++EXPORT_SYMBOL(tahvo_set_clear_reg_bits);
+ 
+ static irqreturn_t tahvo_irq_handler(int irq, void *_tahvo)
+ {