omap24xx: remove 2.6.38 support

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31426 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 137 deletions

diff --git a/target/linux/omap24xx/patches-2.6.38/850-musb-tusb-modular-fixes.patch b/target/linux/omap24xx/patches-2.6.38/850-musb-tusb-modular-fixes.patch
deleted file mode 100644
index 111a499227..0000000000
--- a/target/linux/omap24xx/patches-2.6.38/850-musb-tusb-modular-fixes.patch
+++ /dev/null
@@ -1,137 +0,0 @@
---- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -66,7 +66,7 @@ obj-$(CONFIG_TC)		+= tc/
- obj-$(CONFIG_UWB)		+= uwb/
- obj-$(CONFIG_USB_OTG_UTILS)	+= usb/otg/
- obj-$(CONFIG_USB)		+= usb/
--obj-$(CONFIG_USB_MUSB_HDRC)	+= usb/musb/
-+obj-y				+= usb/musb/
- obj-$(CONFIG_PCI)		+= usb/
- obj-$(CONFIG_USB_GADGET)	+= usb/gadget/
- obj-$(CONFIG_SERIO)		+= input/serio/
---- a/drivers/usb/musb/Kconfig
-+++ b/drivers/usb/musb/Kconfig
-@@ -46,7 +46,7 @@ config USB_MUSB_DA8XX
- 	depends on ARCH_DAVINCI_DA8XX
- 
- config USB_MUSB_TUSB6010
--	bool "TUSB6010"
-+	tristate "TUSB6010"
- 	depends on ARCH_OMAP
- 
- config USB_MUSB_OMAP2PLUS
---- a/drivers/usb/musb/tusb6010.c
-+++ b/drivers/usb/musb/tusb6010.c
-@@ -55,6 +55,7 @@ u8 tusb_get_revision(struct musb *musb)
- 
- 	return rev;
- }
-+EXPORT_SYMBOL(tusb_get_revision);
- 
- static int tusb_print_revision(struct musb *musb)
- {
-@@ -218,6 +219,7 @@ void musb_write_fifo(struct musb_hw_ep *
- 	if (len > 0)
- 		tusb_fifo_write_unaligned(fifo, buf, len);
- }
-+EXPORT_SYMBOL(musb_write_fifo);
- 
- void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf)
- {
-@@ -264,6 +266,7 @@ void musb_read_fifo(struct musb_hw_ep *h
- 	if (len > 0)
- 		tusb_fifo_read_unaligned(fifo, buf, len);
- }
-+EXPORT_SYMBOL(musb_read_fifo);
- 
- static struct musb *the_musb;
- 
-@@ -1259,18 +1262,16 @@ static struct platform_driver tusb_drive
- 	},
- };
- 
--MODULE_DESCRIPTION("TUSB6010 MUSB Glue Layer");
--MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
--MODULE_LICENSE("GPL v2");
-+//MODULE_DESCRIPTION("TUSB6010 MUSB Glue Layer");
-+//MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
-+//MODULE_LICENSE("GPL v2");
- 
--static int __init tusb_init(void)
-+int musb_hdrc_glue_init(void)
- {
- 	return platform_driver_probe(&tusb_driver, tusb_probe);
- }
--subsys_initcall(tusb_init);
- 
--static void __exit tusb_exit(void)
-+void musb_hdrc_glue_exit(void)
- {
- 	platform_driver_unregister(&tusb_driver);
- }
--module_exit(tusb_exit);
---- a/drivers/usb/musb/Makefile
-+++ b/drivers/usb/musb/Makefile
-@@ -13,13 +13,13 @@ musb_hdrc-$(CONFIG_USB_MUSB_HDRC_HCD)		+
- musb_hdrc-$(CONFIG_DEBUG_FS)			+= musb_debugfs.o
- 
- # Hardware Glue Layer
--obj-$(CONFIG_USB_MUSB_OMAP2PLUS)		+= omap2430.o
--obj-$(CONFIG_USB_MUSB_AM35X)			+= am35x.o
--obj-$(CONFIG_USB_MUSB_TUSB6010)			+= tusb6010.o
--obj-$(CONFIG_USB_MUSB_DAVINCI)			+= davinci.o
--obj-$(CONFIG_USB_MUSB_DA8XX)			+= da8xx.o
--obj-$(CONFIG_USB_MUSB_BLACKFIN)			+= blackfin.o
--obj-$(CONFIG_USB_MUSB_UX500)			+= ux500.o
-+musb_hdrc-$(CONFIG_USB_MUSB_OMAP2PLUS)		+= omap2430.o
-+musb_hdrc-$(CONFIG_USB_MUSB_AM35X)		+= am35x.o
-+musb_hdrc-$(CONFIG_USB_MUSB_TUSB6010)		+= tusb6010.o
-+musb_hdrc-$(CONFIG_USB_MUSB_DAVINCI)		+= davinci.o
-+musb_hdrc-$(CONFIG_USB_MUSB_DA8XX)		+= da8xx.o
-+musb_hdrc-$(CONFIG_USB_MUSB_BLACKFIN)		+= blackfin.o
-+musb_hdrc-$(CONFIG_USB_MUSB_UX500)		+= ux500.o
- 
- # the kconfig must guarantee that only one of the
- # possible I/O schemes will be enabled at a time ...
---- a/drivers/usb/musb/musb_core.c
-+++ b/drivers/usb/musb/musb_core.c
-@@ -2427,8 +2427,13 @@ static struct platform_driver musb_drive
- 
- /*-------------------------------------------------------------------------*/
- 
-+extern int musb_hdrc_glue_init(void);
-+extern void musb_hdrc_glue_exit(void);
-+
- static int __init musb_init(void)
- {
-+	int err;
-+
- #ifdef CONFIG_USB_MUSB_HDRC_HCD
- 	if (usb_disabled())
- 		return 0;
-@@ -2456,7 +2461,17 @@ static int __init musb_init(void)
- #endif
- 		", debug=%d\n",
- 		musb_driver_name, musb_debug);
--	return platform_driver_probe(&musb_driver, musb_probe);
-+
-+	err = musb_hdrc_glue_init();
-+	if (err)
-+		return err;
-+	err = platform_driver_probe(&musb_driver, musb_probe);
-+	if (err) {
-+		musb_hdrc_glue_exit();
-+		return err;
-+	}
-+
-+	return 0;
- }
- 
- /* make us init after usbcore and i2c (transceivers, regulators, etc)
-@@ -2467,5 +2482,6 @@ fs_initcall(musb_init);
- static void __exit musb_cleanup(void)
- {
- 	platform_driver_unregister(&musb_driver);
-+	musb_hdrc_glue_exit();
- }
- module_exit(musb_cleanup);