omap: remove old kernel versions

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44803

6 files changed, 0 insertions, 636 deletions

diff --git a/target/linux/omap/patches-3.13/0334-video-da8xx-fb-adding-dt-support.patch b/target/linux/omap/patches-3.13/0334-video-da8xx-fb-adding-dt-support.patch
deleted file mode 100644
index 63ec77f124..0000000000
--- a/target/linux/omap/patches-3.13/0334-video-da8xx-fb-adding-dt-support.patch
+++ /dev/null
@@ -1,203 +0,0 @@
-From 884d3962ef4787c8cf0b8a7a673531c623d1dff8 Mon Sep 17 00:00:00 2001
-From: Darren Etheridge <detheridge@ti.com>
-Date: Fri, 2 Aug 2013 15:35:36 -0500
-Subject: [PATCH 334/752] video: da8xx-fb: adding dt support
-
-Enhancing driver to enable probe triggered by a corresponding dt entry.
-
-Add da8xx-fb.txt documentation to devicetree section.
-
-Obtain fb_videomode details for the connected lcd panel using the
-display timing details present in DT.
-
-Ensure that platform data is present before checking whether platform
-callback is present (the one used to control backlight). So far this
-was not an issue as driver was purely non-DT triggered, but now DT
-support has been added this check must be performed.
-
-v2: squashing multiple commits from Afzal Mohammed (afzal@ti.com)
-v3: remove superfluous cast
-v4: expose both ti,am3352-lcdc and ti,da830-lcdc for .compatible
-	as driver can use enhanced features of all version of the
-	silicon block.
-v5: addressed review comments from Prabhakar Lad
-v6: Changed the .compatible naming to match the existing drm bindings
-	for am33xx devices
-v7: clarify which compatible to use in the documentation for DA850
-
-Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
-Signed-off-by: Darren Etheridge <detheridge@ti.com>
----
- .../devicetree/bindings/video/da8xx-fb.txt         |   42 +++++++++++++
- drivers/video/da8xx-fb.c                           |   66 +++++++++++++++++++-
- 2 files changed, 105 insertions(+), 3 deletions(-)
- create mode 100644 Documentation/devicetree/bindings/video/da8xx-fb.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/video/da8xx-fb.txt
-@@ -0,0 +1,42 @@
-+TI LCD Controller on DA830/DA850/AM335x SoC's
-+
-+Required properties:
-+- compatible:
-+	DA830, DA850 - "ti,da8xx-tilcdc"
-+	AM335x SoC's - "ti,am33xx-tilcdc"
-+- reg: Address range of lcdc register set
-+- interrupts: lcdc interrupt
-+- display-timings: typical videomode of lcd panel, represented as child.
-+  Refer Documentation/devicetree/bindings/video/display-timing.txt for
-+  display timing binding details. If multiple videomodes are mentioned
-+  in display timings node, typical videomode has to be mentioned as the
-+  native mode or it has to be first child (driver cares only for native
-+  videomode).
-+
-+Recommended properties:
-+- ti,hwmods: Name of the hwmod associated to the LCDC
-+
-+Example for am335x SoC's:
-+
-+lcdc@4830e000 {
-+	compatible = "ti,am33xx-tilcdc";
-+	reg =  <0x4830e000 0x1000>;
-+	interrupts = <36>;
-+	ti,hwmods = "lcdc";
-+	status = "okay";
-+	display-timings {
-+		800x480p62 {
-+			clock-frequency = <30000000>;
-+			hactive = <800>;
-+			vactive = <480>;
-+			hfront-porch = <39>;
-+			hback-porch = <39>;
-+			hsync-len = <47>;
-+			vback-porch = <29>;
-+			vfront-porch = <13>;
-+			vsync-len = <2>;
-+			hsync-active = <1>;
-+			vsync-active = <1>;
-+		};
-+	};
-+};
---- a/drivers/video/da8xx-fb.c
-+++ b/drivers/video/da8xx-fb.c
-@@ -36,6 +36,7 @@
- #include <linux/slab.h>
- #include <linux/delay.h>
- #include <linux/lcm.h>
-+#include <video/of_display_timing.h>
- #include <video/da8xx-fb.h>
- #include <asm/div64.h>
- 
-@@ -1311,12 +1312,54 @@ static struct fb_ops da8xx_fb_ops = {
- 	.fb_blank = cfb_blank,
- };
- 
-+static struct lcd_ctrl_config *da8xx_fb_create_cfg(struct platform_device *dev)
-+{
-+	struct lcd_ctrl_config *cfg;
-+
-+	cfg = devm_kzalloc(&dev->dev, sizeof(struct fb_videomode), GFP_KERNEL);
-+	if (!cfg)
-+		return NULL;
-+
-+	/* default values */
-+
-+	if (lcd_revision == LCD_VERSION_1)
-+		cfg->bpp = 16;
-+	else
-+		cfg->bpp = 32;
-+
-+	/*
-+	 * For panels so far used with this LCDC, below statement is sufficient.
-+	 * For new panels, if required, struct lcd_ctrl_cfg fields to be updated
-+	 * with additional/modified values. Those values would have to be then
-+	 * obtained from dt(requiring new dt bindings).
-+	 */
-+
-+	cfg->panel_shade = COLOR_ACTIVE;
-+
-+	return cfg;
-+}
-+
- static struct fb_videomode *da8xx_fb_get_videomode(struct platform_device *dev)
- {
- 	struct da8xx_lcdc_platform_data *fb_pdata = dev_get_platdata(&dev->dev);
- 	struct fb_videomode *lcdc_info;
-+	struct device_node *np = dev->dev.of_node;
- 	int i;
- 
-+	if (np) {
-+		lcdc_info = devm_kzalloc(&dev->dev,
-+					 sizeof(struct fb_videomode),
-+					 GFP_KERNEL);
-+		if (!lcdc_info)
-+			return NULL;
-+
-+		if (of_get_fb_videomode(np, lcdc_info, OF_USE_NATIVE_MODE)) {
-+			dev_err(&dev->dev, "timings not available in DT\n");
-+			return NULL;
-+		}
-+		return lcdc_info;
-+	}
-+
- 	for (i = 0, lcdc_info = known_lcd_panels;
- 		i < ARRAY_SIZE(known_lcd_panels); i++, lcdc_info++) {
- 		if (strcmp(fb_pdata->type, lcdc_info->name) == 0)
-@@ -1345,7 +1388,7 @@ static int fb_probe(struct platform_devi
- 	int ret;
- 	unsigned long ulcm;
- 
--	if (fb_pdata == NULL) {
-+	if (fb_pdata == NULL && !device->dev.of_node) {
- 		dev_err(&device->dev, "Can not get platform data\n");
- 		return -ENOENT;
- 	}
-@@ -1385,7 +1428,10 @@ static int fb_probe(struct platform_devi
- 		break;
- 	}
- 
--	lcd_cfg = (struct lcd_ctrl_config *)fb_pdata->controller_data;
-+	if (device->dev.of_node)
-+		lcd_cfg = da8xx_fb_create_cfg(device);
-+	else
-+		lcd_cfg = fb_pdata->controller_data;
- 
- 	if (!lcd_cfg) {
- 		ret = -EINVAL;
-@@ -1404,7 +1450,7 @@ static int fb_probe(struct platform_devi
- 	par->dev = &device->dev;
- 	par->lcdc_clk = tmp_lcdc_clk;
- 	par->lcdc_clk_rate = clk_get_rate(par->lcdc_clk);
--	if (fb_pdata->panel_power_ctrl) {
-+	if (fb_pdata && fb_pdata->panel_power_ctrl) {
- 		par->panel_power_ctrl = fb_pdata->panel_power_ctrl;
- 		par->panel_power_ctrl(1);
- 	}
-@@ -1652,6 +1698,19 @@ static int fb_resume(struct platform_dev
- #define fb_resume NULL
- #endif
- 
-+#if IS_ENABLED(CONFIG_OF)
-+static const struct of_device_id da8xx_fb_of_match[] = {
-+	/*
-+	 * this driver supports version 1 and version 2 of the
-+	 * Texas Instruments lcd controller (lcdc) hardware block
-+	 */
-+	{.compatible = "ti,da8xx-tilcdc", },
-+	{.compatible = "ti,am33xx-tilcdc", },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, da8xx_fb_of_match);
-+#endif
-+
- static struct platform_driver da8xx_fb_driver = {
- 	.probe = fb_probe,
- 	.remove = fb_remove,
-@@ -1660,6 +1719,7 @@ static struct platform_driver da8xx_fb_d
- 	.driver = {
- 		   .name = DRIVER_NAME,
- 		   .owner = THIS_MODULE,
-+		   .of_match_table = of_match_ptr(da8xx_fb_of_match),
- 		   },
- };
- module_platform_driver(da8xx_fb_driver);
diff --git a/target/linux/omap/patches-3.13/0343-video-da8xx-fb-Add-API-to-register-wait-for-vsync-ca.patch b/target/linux/omap/patches-3.13/0343-video-da8xx-fb-Add-API-to-register-wait-for-vsync-ca.patch
deleted file mode 100644
index d565eaee03..0000000000
--- a/target/linux/omap/patches-3.13/0343-video-da8xx-fb-Add-API-to-register-wait-for-vsync-ca.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From 9a1a810516ae9cb3259b898b6879901c5b44fa90 Mon Sep 17 00:00:00 2001
-From: Prathap M S <msprathap@ti.com>
-Date: Mon, 2 Sep 2013 12:05:23 +0530
-Subject: [PATCH 343/752] video: da8xx-fb: Add API to register wait for vsync
- callback
-
-This patch adds APIs to register and unregister wait for vsync callback.
-This is derived from commit id 2d44302545da24fd22912d964102bc31a7489e97
-This commit id was part of 3.2 kernel sources.
-
-Signed-off-by: Prathap M S <msprathap@ti.com>
----
- drivers/video/da8xx-fb.c |   33 +++++++++++++++++++++++++++++++++
- include/video/da8xx-fb.h |    4 ++++
- 2 files changed, 37 insertions(+)
-
---- a/drivers/video/da8xx-fb.c
-+++ b/drivers/video/da8xx-fb.c
-@@ -197,6 +197,9 @@ static struct fb_fix_screeninfo da8xx_fb
- 	.accel = FB_ACCEL_NONE
- };
- 
-+static vsync_callback_t vsync_cb_handler;
-+static void *vsync_cb_arg;
-+
- static struct fb_videomode known_lcd_panels[] = {
- 	/* Sharp LCD035Q3DG01 */
- 	[0] = {
-@@ -825,6 +828,32 @@ static int lcd_init(struct da8xx_fb_par
- 	return 0;
- }
- 
-+int register_vsync_cb(vsync_callback_t handler, void *arg, int idx)
-+{
-+	if ((vsync_cb_handler == NULL) && (vsync_cb_arg == NULL)) {
-+		vsync_cb_arg = arg;
-+		vsync_cb_handler = handler;
-+	} else {
-+		return -EEXIST;
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(register_vsync_cb);
-+
-+int unregister_vsync_cb(vsync_callback_t handler, void *arg, int idx)
-+{
-+	if ((vsync_cb_handler == handler) && (vsync_cb_arg == arg)) {
-+		vsync_cb_handler = NULL;
-+		vsync_cb_arg = NULL;
-+	} else {
-+		return -ENXIO;
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(unregister_vsync_cb);
-+
- /* IRQ handler for version 2 of LCDC */
- static irqreturn_t lcdc_irq_handler_rev02(int irq, void *arg)
- {
-@@ -862,6 +891,8 @@ static irqreturn_t lcdc_irq_handler_rev0
- 				   LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
- 			par->vsync_flag = 1;
- 			wake_up_interruptible(&par->vsync_wait);
-+			if (vsync_cb_handler)
-+				vsync_cb_handler(vsync_cb_arg);
- 		}
- 
- 		if (stat & LCD_END_OF_FRAME1) {
-@@ -937,6 +968,8 @@ static irqreturn_t lcdc_irq_handler_rev0
- 				   LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
- 			par->vsync_flag = 1;
- 			wake_up_interruptible(&par->vsync_wait);
-+			if (vsync_cb_handler)
-+				vsync_cb_handler(vsync_cb_arg);
- 		}
- 	}
- 
---- a/include/video/da8xx-fb.h
-+++ b/include/video/da8xx-fb.h
-@@ -91,5 +91,9 @@ struct lcd_sync_arg {
- /* Proprietary FB_SYNC_ flags */
- #define FB_SYNC_CLK_INVERT 0x40000000
- 
-+typedef void (*vsync_callback_t)(void *arg);
-+int register_vsync_cb(vsync_callback_t handler, void *arg, int idx);
-+int unregister_vsync_cb(vsync_callback_t handler, void *arg, int idx);
-+
- #endif  /* ifndef DA8XX_FB_H */
- 
diff --git a/target/linux/omap/patches-3.13/0752-video-da8xx-fb-fix-defect-with-vsync-callback-invoca.patch b/target/linux/omap/patches-3.13/0752-video-da8xx-fb-fix-defect-with-vsync-callback-invoca.patch
deleted file mode 100644
index 0fe90156a8..0000000000
--- a/target/linux/omap/patches-3.13/0752-video-da8xx-fb-fix-defect-with-vsync-callback-invoca.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From c99bd415829ef29adf71bb1e1b577650f10e93f5 Mon Sep 17 00:00:00 2001
-From: Darren Etheridge <detheridge@ti.com>
-Date: Mon, 4 Nov 2013 12:27:40 -0600
-Subject: [PATCH 752/752] video/da8xx-fb fix defect with vsync callback
- invocation
-
-Fix defect where SGX is running at half of the expected framerate.
-The original patch (@ commit ID 9a1a810516ae9cb3259b898b6879901c5b44fa90)
-seems to have a mistake where it only calls the callback
-for the even or the odd frames depending on the revision of the LCD controller
-This patch corrects this and invokes the callback for both odd and even frame
-for just the Rev02 version of the LCDC (won't find an SGX GPU on a Rev01).
-
-Signed-off-by: Darren Etheridge <detheridge@ti.com>
----
- drivers/video/da8xx-fb.c |    4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/video/da8xx-fb.c
-+++ b/drivers/video/da8xx-fb.c
-@@ -903,6 +903,8 @@ static irqreturn_t lcdc_irq_handler_rev0
- 				   LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
- 			par->vsync_flag = 1;
- 			wake_up_interruptible(&par->vsync_wait);
-+			if (vsync_cb_handler)
-+				vsync_cb_handler(vsync_cb_arg);
- 		}
- 
- 		/* Set only when controller is disabled and at the end of
-@@ -968,8 +970,6 @@ static irqreturn_t lcdc_irq_handler_rev0
- 				   LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
- 			par->vsync_flag = 1;
- 			wake_up_interruptible(&par->vsync_wait);
--			if (vsync_cb_handler)
--				vsync_cb_handler(vsync_cb_arg);
- 		}
- 	}
- 
diff --git a/target/linux/omap/patches-3.13/900-wlcore-Add-support-for-DT-platform-data.patch b/target/linux/omap/patches-3.13/900-wlcore-Add-support-for-DT-platform-data.patch
deleted file mode 100644
index 750d9e3d68..0000000000
--- a/target/linux/omap/patches-3.13/900-wlcore-Add-support-for-DT-platform-data.patch
+++ /dev/null
@@ -1,155 +0,0 @@
-When running with DT, we no longer have a board file that can set up the
-platform data for wlcore. Allow this data to be passed from DT.
-
-Since some platforms use a gpio-irq, add support for passing either the
-irq number or the gpio number. For the latter case, the driver will
-request the gpio and convert it to the irq number. If an irq is
-specified, it'll be used as is.
-
-[Arik - the pdev_data pointer does not belong to us and is freed when
-the device is released. Dereference to our private data first.]
-
-Signed-off-by: Ido Yariv <ido@wizery.com>
-Signed-off-by: Arik Nemtsov <arik@wizery.com>
----
- drivers/net/wireless/ti/wlcore/sdio.c | 71 ++++++++++++++++++++++++++++++++---
- include/linux/wl12xx.h                |  3 +-
- 2 files changed, 67 insertions(+), 7 deletions(-)
-
---- a/drivers/net/wireless/ti/wlcore/sdio.c
-+++ b/drivers/net/wireless/ti/wlcore/sdio.c
-@@ -34,6 +34,7 @@
- #include <linux/wl12xx.h>
- #include <linux/pm_runtime.h>
- #include <linux/printk.h>
-+#include <linux/of.h>
- 
- #include "wlcore.h"
- #include "wl12xx_80211.h"
-@@ -214,6 +215,61 @@ static struct wl1271_if_operations sdio_
- 	.set_block_size = wl1271_sdio_set_block_size,
- };
- 
-+static const struct of_device_id wlcore_of_match[] = {
-+	{
-+		.compatible = "wlcore",
-+	},
-+	{}
-+};
-+MODULE_DEVICE_TABLE(of, wlcore_of_match);
-+
-+static struct wl12xx_platform_data *get_platform_data(struct device *dev)
-+{
-+	struct wl12xx_platform_data *pdata;
-+	struct device_node *np;
-+	u32 gpio;
-+
-+	pdata = wl12xx_get_platform_data();
-+	if (!IS_ERR(pdata))
-+		return kmemdup(pdata, sizeof(*pdata), GFP_KERNEL);
-+
-+	np = of_find_matching_node(NULL, wlcore_of_match);
-+	if (!np) {
-+		dev_err(dev, "No platform data set\n");
-+		return NULL;
-+	}
-+
-+	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
-+	if (!pdata) {
-+		dev_err(dev, "Can't allocate platform data\n");
-+		return NULL;
-+	}
-+
-+	if (of_property_read_u32(np, "irq", &pdata->irq)) {
-+		if (!of_property_read_u32(np, "gpio", &gpio) &&
-+		    !gpio_request_one(gpio, GPIOF_IN, "wlcore_irq")) {
-+			pdata->gpio = gpio;
-+			pdata->irq = gpio_to_irq(gpio);
-+		}
-+	}
-+
-+	/* Optional fields */
-+	pdata->use_eeprom = of_property_read_bool(np, "use-eeprom");
-+	of_property_read_u32(np, "board-ref-clock", &pdata->board_ref_clock);
-+	of_property_read_u32(np, "board-tcxo-clock", &pdata->board_tcxo_clock);
-+	of_property_read_u32(np, "platform-quirks", &pdata->platform_quirks);
-+
-+	return pdata;
-+}
-+
-+static void del_platform_data(struct wl12xx_platform_data *pdata)
-+{
-+	if (pdata->gpio)
-+		gpio_free(pdata->gpio);
-+
-+	kfree(pdata);
-+}
-+
- static int wl1271_probe(struct sdio_func *func,
- 				  const struct sdio_device_id *id)
- {
-@@ -248,12 +304,9 @@ static int wl1271_probe(struct sdio_func
- 	/* Use block mode for transferring over one block size of data */
- 	func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
- 
--	pdev_data->pdata = wl12xx_get_platform_data();
--	if (IS_ERR(pdev_data->pdata)) {
--		ret = PTR_ERR(pdev_data->pdata);
--		dev_err(glue->dev, "missing wlan platform data: %d\n", ret);
-+	pdev_data->pdata = get_platform_data(&func->dev);
-+	if (!(pdev_data->pdata))
- 		goto out_free_glue;
--	}
- 
- 	/* if sdio can keep power while host is suspended, enable wow */
- 	mmcflags = sdio_get_host_pm_caps(func);
-@@ -282,7 +335,7 @@ static int wl1271_probe(struct sdio_func
- 	if (!glue->core) {
- 		dev_err(glue->dev, "can't allocate platform_device");
- 		ret = -ENOMEM;
--		goto out_free_glue;
-+		goto out_free_pdata;
- 	}
- 
- 	glue->core->dev.parent = &func->dev;
-@@ -316,6 +369,9 @@ static int wl1271_probe(struct sdio_func
- out_dev_put:
- 	platform_device_put(glue->core);
- 
-+out_free_pdata:
-+	del_platform_data(pdev_data->pdata);
-+
- out_free_glue:
- 	kfree(glue);
- 
-@@ -329,11 +385,14 @@ out:
- static void wl1271_remove(struct sdio_func *func)
- {
- 	struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func);
-+	struct wlcore_platdev_data *pdev_data = glue->core->dev.platform_data;
-+	struct wl12xx_platform_data *pdata = pdev_data->pdata;
- 
- 	/* Undo decrement done above in wl1271_probe */
- 	pm_runtime_get_noresume(&func->dev);
- 
- 	platform_device_unregister(glue->core);
-+	del_platform_data(pdata);
- 	kfree(glue);
- }
- 
---- a/include/linux/wl12xx.h
-+++ b/include/linux/wl12xx.h
-@@ -51,11 +51,12 @@ enum {
- struct wl12xx_platform_data {
- 	void (*set_power)(bool enable);
- 	/* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */
-+	int gpio;
- 	int irq;
- 	bool use_eeprom;
- 	int board_ref_clock;
- 	int board_tcxo_clock;
--	unsigned long platform_quirks;
-+	u32 platform_quirks;
- 	bool pwr_in_suspend;
- };
- 
diff --git a/target/linux/omap/patches-3.13/920-arm-dts-am335x-evmsk-add-support-for-lcd-panel.patch b/target/linux/omap/patches-3.13/920-arm-dts-am335x-evmsk-add-support-for-lcd-panel.patch
deleted file mode 100644
index 932fdc1528..0000000000
--- a/target/linux/omap/patches-3.13/920-arm-dts-am335x-evmsk-add-support-for-lcd-panel.patch
+++ /dev/null
@@ -1,70 +0,0 @@
---- a/arch/arm/boot/dts/am335x-evmsk.dts
-+++ b/arch/arm/boot/dts/am335x-evmsk.dts
-@@ -132,6 +132,39 @@
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
- 
-+	lcd_pins_s0: lcd_pins_s0 {
-+		pinctrl-single,pins = <
-+			0x20 0x01	/* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */
-+			0x24 0x01	/* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */
-+			0x28 0x01	/* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */
-+			0x2c 0x01	/* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */
-+			0x30 0x01	/* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */
-+			0x34 0x01	/* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */
-+			0x38 0x01	/* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */
-+			0x3c 0x01	/* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */
-+			0xa0 0x00	/* lcd_data0.lcd_data0, OUTPUT | MODE0 */
-+			0xa4 0x00	/* lcd_data1.lcd_data1, OUTPUT | MODE0 */
-+			0xa8 0x00	/* lcd_data2.lcd_data2, OUTPUT | MODE0 */
-+			0xac 0x00	/* lcd_data3.lcd_data3, OUTPUT | MODE0 */
-+			0xb0 0x00	/* lcd_data4.lcd_data4, OUTPUT | MODE0 */
-+			0xb4 0x00	/* lcd_data5.lcd_data5, OUTPUT | MODE0 */
-+			0xb8 0x00	/* lcd_data6.lcd_data6, OUTPUT | MODE0 */
-+			0xbc 0x00	/* lcd_data7.lcd_data7, OUTPUT | MODE0 */
-+			0xc0 0x00	/* lcd_data8.lcd_data8, OUTPUT | MODE0 */
-+			0xc4 0x00	/* lcd_data9.lcd_data9, OUTPUT | MODE0 */
-+			0xc8 0x00	/* lcd_data10.lcd_data10, OUTPUT | MODE0 */
-+			0xcc 0x00	/* lcd_data11.lcd_data11, OUTPUT | MODE0 */
-+			0xd0 0x00	/* lcd_data12.lcd_data12, OUTPUT | MODE0 */
-+			0xd4 0x00	/* lcd_data13.lcd_data13, OUTPUT | MODE0 */
-+			0xd8 0x00	/* lcd_data14.lcd_data14, OUTPUT | MODE0 */
-+			0xdc 0x00	/* lcd_data15.lcd_data15, OUTPUT | MODE0 */
-+			0xe0 0x00	/* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */
-+			0xe4 0x00	/* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */
-+			0xe8 0x00	/* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */
-+			0xec 0x00	/* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */
-+		>;
-+	};
-+
- 	user_leds_s0: user_leds_s0 {
- 		pinctrl-single,pins = <
- 			0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
-@@ -486,6 +519,27 @@
- 		rx-num-evt = <1>;
- };
- 
-+&lcdc {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&lcd_pins_s0>;
-+	status = "okay";
-+	display-timings {
-+		480x272 {
-+			hactive         = <480>;
-+			vactive         = <272>;
-+			hback-porch     = <43>;
-+			hfront-porch    = <8>;
-+			hsync-len       = <4>;
-+			vback-porch     = <12>;
-+			vfront-porch    = <4>;
-+			vsync-len       = <10>;
-+			clock-frequency = <9000000>;
-+			hsync-active    = <0>;
-+			vsync-active    = <0>;
-+		};
-+	};
-+};
-+
- &tscadc {
- 	status = "okay";
- 	tsc {
diff --git a/target/linux/omap/patches-3.13/950-am335x-evmsk-wilink-dts.patch b/target/linux/omap/patches-3.13/950-am335x-evmsk-wilink-dts.patch
deleted file mode 100644
index 7ebbbeaec3..0000000000
--- a/target/linux/omap/patches-3.13/950-am335x-evmsk-wilink-dts.patch
+++ /dev/null
@@ -1,79 +0,0 @@
---- a/arch/arm/boot/dts/am335x-evmsk.dts
-+++ b/arch/arm/boot/dts/am335x-evmsk.dts
-@@ -14,6 +14,7 @@
- /dts-v1/;
- 
- #include "am33xx.dtsi"
-+#include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/pwm/pwm.h>
- 
- / {
-@@ -26,6 +27,13 @@
- 		};
- 	};
- 
-+	wlan {
-+		compatible = "wlcore";
-+
-+		gpio = <31>;
-+		board-ref-clock = <4>;
-+	};
-+
- 	memory {
- 		device_type = "memory";
- 		reg = <0x80000000 0x10000000>; /* 256 MB */
-@@ -45,6 +53,16 @@
- 		regulator-boot-on;
- 	};
- 
-+	vmmc_wl: fixedregulator@2 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vmmc-wl";
-+		regulator-min-microvolt = <1800000>;
-+		regulator-max-microvolt = <1800000>;
-+		gpio = <&gpio1 29 0>;
-+		startup-delay-us = <70000>;
-+		enable-active-high;
-+	};
-+
- 	leds {
- 		pinctrl-names = "default";
- 		pinctrl-0 = <&user_leds_s0>;
-@@ -297,6 +315,20 @@
- 			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
- 		>;
- 	};
-+
-+	wilink_pins: pinmux_wilink_pins {
-+		pinctrl-single,pins = <
-+			0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
-+			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
-+			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-+			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-+			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-+			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-+			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-+			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-+		>;
-+	};
-+
- };
- 
- &uart0 {
-@@ -503,6 +535,16 @@
- 	ti,no-reset-on-init;
- };
- 
-+&mmc2 {
-+	status = "okay";
-+	vmmc-supply = <&vmmc_wl>;
-+	bus-width = <4>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&wilink_pins>;
-+	ti,non-removable;
-+	keep-power-in-suspend;
-+};
-+
- &mcasp1 {
- 		pinctrl-names = "default";
- 		pinctrl-0 = <&mcasp1_pins>;