BB: remove some targets that are broken or have the wrong kernel version

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@41876 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 118 deletions

diff --git a/target/linux/mxs/files/arch/arm/boot/dts/imx28-duckbill.dts b/target/linux/mxs/files/arch/arm/boot/dts/imx28-duckbill.dts
deleted file mode 100644
index a5eb3c1765..0000000000
--- a/target/linux/mxs/files/arch/arm/boot/dts/imx28-duckbill.dts
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Copyright (C) 2013 Michael Heimpold <mhei@heimpold.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "I2SE Duckbill";
-	compatible = "i2se,duckbill", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						0x40d3 /* MX28_PAD_ENET0_RX_CLK__GPIO_4_13, PHY Reset */
-					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
-				};
-
-				led_pins_a: led_gpio@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						0x3043 /* MX28_PAD_AUART1_RX__GPIO_3_4 */
-						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
-					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio4 13 0>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		reg_3p3v: 3p3v {
-			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_a>;
-
-		status {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 5 0>;
-		};
-
-		failure {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 4 0>;
-		};
-	};
-};