generic/3.18: upgrade to 3.18.11

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45303

1 files changed, 0 insertions, 92 deletions

diff --git a/target/linux/mvebu/patches-3.18/019-mtd-nand-pxa3xx-Fix-PIO-FIFO-draining.patch b/target/linux/mvebu/patches-3.18/019-mtd-nand-pxa3xx-Fix-PIO-FIFO-draining.patch
deleted file mode 100644
index a841f5eadd..0000000000
--- a/target/linux/mvebu/patches-3.18/019-mtd-nand-pxa3xx-Fix-PIO-FIFO-draining.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From 11aa9df4de06cc257327d783c5cb615989e87286 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Fri, 23 Jan 2015 15:18:27 +0100
-Subject: [PATCH v2 1/2] mtd: nand: pxa3xx: Fix PIO FIFO draining
-
-The NDDB register holds the data that are needed by the read and write
-commands.
-
-However, during a read PIO access, the datasheet specifies that after each 32
-bits read in that register, when BCH is enabled, we have to make sure that the
-RDDREQ bit is set in the NDSR register.
-
-This fixes an issue that was seen on the Armada 385, and presumably other mvebu
-SoCs, when a read on a newly erased page would end up in the driver reporting a
-timeout from the NAND.
-
-Cc: <stable@vger.kernel.org> # v3.14
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- drivers/mtd/nand/pxa3xx_nand.c | 45 ++++++++++++++++++++++++++++++++++++------
- 1 file changed, 39 insertions(+), 6 deletions(-)
-
---- a/drivers/mtd/nand/pxa3xx_nand.c
-+++ b/drivers/mtd/nand/pxa3xx_nand.c
-@@ -23,6 +23,7 @@
- #include <linux/mtd/partitions.h>
- #include <linux/io.h>
- #include <linux/irq.h>
-+#include <linux/jiffies.h>
- #include <linux/slab.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
-@@ -480,6 +481,38 @@ static void disable_int(struct pxa3xx_na
- 	nand_writel(info, NDCR, ndcr | int_mask);
- }
- 
-+static void drain_fifo(struct pxa3xx_nand_info *info, void *data, int len)
-+{
-+	u32 *dst = (u32 *)data;
-+
-+	if (info->ecc_bch) {
-+		while (len--) {
-+			u32 timeout;
-+
-+			*dst++ = nand_readl(info, NDDB);
-+
-+			/*
-+			 * According to the datasheet, when reading
-+			 * from NDDB with BCH enabled, after each 32
-+			 * bits reads, we have to make sure that the
-+			 * NDSR.RDDREQ bit is set
-+			 */
-+			timeout = jiffies + msecs_to_jiffies(5);
-+			while (!(nand_readl(info, NDSR) & NDSR_RDDREQ)) {
-+				if (!time_before(jiffies, timeout)) {
-+					dev_err(&info->pdev->dev,
-+						"Timeout on RDDREQ while draining the FIFO\n");
-+					return;
-+				}
-+
-+				cpu_relax();
-+			}
-+		}
-+	} else {
-+		__raw_readsl(info->mmio_base + NDDB, data, len);
-+	}
-+}
-+
- static void handle_data_pio(struct pxa3xx_nand_info *info)
- {
- 	unsigned int do_bytes = min(info->data_size, info->chunk_size);
-@@ -496,14 +529,14 @@ static void handle_data_pio(struct pxa3x
- 				      DIV_ROUND_UP(info->oob_size, 4));
- 		break;
- 	case STATE_PIO_READING:
--		__raw_readsl(info->mmio_base + NDDB,
--			     info->data_buff + info->data_buff_pos,
--			     DIV_ROUND_UP(do_bytes, 4));
-+		drain_fifo(info,
-+			   info->data_buff + info->data_buff_pos,
-+			   DIV_ROUND_UP(do_bytes, 4));
- 
- 		if (info->oob_size > 0)
--			__raw_readsl(info->mmio_base + NDDB,
--				     info->oob_buff + info->oob_buff_pos,
--				     DIV_ROUND_UP(info->oob_size, 4));
-+			drain_fifo(info,
-+				   info->oob_buff + info->oob_buff_pos,
-+				   DIV_ROUND_UP(info->oob_size, 4));
- 		break;
- 	default:
- 		dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,