diff options
author | Hauke Mehrtens <hauke@hauke-m.de> | 2022-02-12 16:01:04 +0000 |
---|---|---|
committer | Hauke Mehrtens <hauke@hauke-m.de> | 2022-02-12 19:41:39 +0100 |
commit | c6ddf8d5021d5262ecac8648d6ae849a47e1f0fb (patch) | |
tree | 3c230c7cee76b73f451702b26df5e79e3c82306b /target/linux/mvebu/patches-5.4 | |
parent | a4c0c031b8c51daf52ba2947ce139b37bae47086 (diff) | |
download | upstream-c6ddf8d5021d5262ecac8648d6ae849a47e1f0fb.tar.gz upstream-c6ddf8d5021d5262ecac8648d6ae849a47e1f0fb.tar.bz2 upstream-c6ddf8d5021d5262ecac8648d6ae849a47e1f0fb.zip |
kernel: bump 5.4 to 5.4.179
Many changes were done in drivers/pinctrl/bcm/pinctrl-bcm2835.c between
5.4.171 and 5.4.179.
The following 3 patches do not apply any more:
* target/linux/bcm27xx/patches-5.4/950-0316-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch
This was already integrated in kernel v5.4-rc1, it was never needed.
* target/linux/bcm27xx/patches-5.4/950-0328-Revert-pinctrl-bcm2835-Pass-irqchip-when-adding-gpio.patch
* target/linux/bcm27xx/patches-5.4/950-0362-pinctrl-bcm2835-Change-init-order-for-gpio-hogs.patch
I think these were done to fix the problem which was really fixed in
commit 75278f1aff5e ("pinctrl: bcm2835: Change init order for gpio
hogs") from v5.4.175
target/linux/generic/backport-5.4/716-v5.5-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch
Move fwnode_device_is_available to the same position as in kernel 5.10.
target/linux/layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch
Applied in commit 65816c1034769e714edb70f59a33bc5472d9e55f ("arm64: dts:
ls1028a-qds: move rtc node to the correct i2c bus")
Compile-tested: lantiq/xrx200, bcm27xx/bcm2710
Run-tested: lantiq/xrx200
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Diffstat (limited to 'target/linux/mvebu/patches-5.4')
3 files changed, 6 insertions, 6 deletions
diff --git a/target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch b/target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch index 525d9ec794..3d88a9e417 100644 --- a/target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch +++ b/target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch @@ -76,7 +76,7 @@ Cc: Miquèl Raynal <miquel.raynal@bootlin.com> /* Set to Direct mode */ reg = advk_readl(pcie, CTRL_CONFIG_REG); reg &= ~(CTRL_MODE_MASK << CTRL_MODE_SHIFT); -@@ -1493,6 +1502,62 @@ out_release_res: +@@ -1495,6 +1504,62 @@ out_release_res: return err; } @@ -139,7 +139,7 @@ Cc: Miquèl Raynal <miquel.raynal@bootlin.com> static int advk_pcie_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; -@@ -1625,6 +1690,10 @@ static int advk_pcie_probe(struct platfo +@@ -1627,6 +1692,10 @@ static int advk_pcie_probe(struct platfo else pcie->link_gen = ret; diff --git a/target/linux/mvebu/patches-5.4/026-PCI-aardvark-Fix-initialization-with-old-Marvell-s-A.patch b/target/linux/mvebu/patches-5.4/026-PCI-aardvark-Fix-initialization-with-old-Marvell-s-A.patch index 5a6173a666..cab99ce4ce 100644 --- a/target/linux/mvebu/patches-5.4/026-PCI-aardvark-Fix-initialization-with-old-Marvell-s-A.patch +++ b/target/linux/mvebu/patches-5.4/026-PCI-aardvark-Fix-initialization-with-old-Marvell-s-A.patch @@ -31,7 +31,7 @@ Cc: <stable@vger.kernel.org> # 5.8+: ea17a0f153af: phy: marvell: comphy: Convert --- a/drivers/pci/controller/pci-aardvark.c +++ b/drivers/pci/controller/pci-aardvark.c -@@ -1526,7 +1526,9 @@ static int advk_pcie_enable_phy(struct a +@@ -1528,7 +1528,9 @@ static int advk_pcie_enable_phy(struct a } ret = phy_power_on(pcie->phy); diff --git a/target/linux/mvebu/patches-5.4/801-pci-mvebu-time-out-reset-on-link-up.patch b/target/linux/mvebu/patches-5.4/801-pci-mvebu-time-out-reset-on-link-up.patch index 49ea3de0d1..247c6b8273 100644 --- a/target/linux/mvebu/patches-5.4/801-pci-mvebu-time-out-reset-on-link-up.patch +++ b/target/linux/mvebu/patches-5.4/801-pci-mvebu-time-out-reset-on-link-up.patch @@ -13,7 +13,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> --- a/drivers/pci/controller/pci-mvebu.c +++ b/drivers/pci/controller/pci-mvebu.c -@@ -936,6 +936,7 @@ static int mvebu_pcie_powerup(struct mve +@@ -944,6 +944,7 @@ static int mvebu_pcie_powerup(struct mve if (port->reset_gpio) { u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000; @@ -21,7 +21,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> of_property_read_u32(port->dn, "reset-delay-us", &reset_udelay); -@@ -943,7 +944,13 @@ static int mvebu_pcie_powerup(struct mve +@@ -951,7 +952,13 @@ static int mvebu_pcie_powerup(struct mve udelay(100); gpiod_set_value_cansleep(port->reset_gpio, 0); @@ -36,7 +36,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> } return 0; -@@ -1107,15 +1114,16 @@ static int mvebu_pcie_probe(struct platf +@@ -1115,15 +1122,16 @@ static int mvebu_pcie_probe(struct platf if (!child) continue; |