mvebu: new subtarget cortex A53

This commit introduces new subtarget for Marvell EBU Armada Cortex A53
processor based devices.

The first device is Globalscale ESPRESSObin. Some hardware specs:

SoC: Marvell Armada 3700LP (88F3720) dual core ARM Cortex A53
     processor up to 1.2GHz
RAM: 512MB, 1GB or 2GB DDR3
Storage: SATA interface
         µSD card slot with footprint for an optional 4GB EMMC
         4MB SPI NOR flash for bootloader
Ethernet: Topaz Networking Switch (88E6341) with 3x GbE ports
Connectors: USB 3.0
            USB 2.0
            µUSB port connected to PL2303SA (USB to serial bridge
            controller) for UART access
Expansion: 2x 46-pin GPIO headers for accessories and shields with
           I2C, GPIOs, PWM, UART, SPI, MMC, etc
           MiniPCIe slot
Misc: Reset button, JTAG interface

Currently booting only from µSD card is supported.
The boards depending on date of dispatch can come with various U-Boot
versions. For the newest version 2017.03-armada-17.10 no manual
intervention should be needed to boot OpenWrt image. For the older ones
it's necessary to modify default U-Boot environment:

 1. Interrupt boot process to run U-Boot command line,

 2. Run following commands:
    (for version 2017.03-armada-17.06 and 2017.03-armada-17.08)
     setenv bootcmd "load mmc 0:1 0x4d00000 boot.scr; source 0x4d00000"
     saveenv

    (for version 2015.01-armada-17.02 and 2015.01-armada-17.04)
     setenv bootargs "console=ttyMV0,115200 root=/dev/mmcblk0p2 rw rootwait"
     setenv bootcmd "ext4load mmc 0:1 ${fdt_addr} armada-3720-espressobin.dtb; ext4load mmc 0:1 ${kernel_addr} Image; booti ${kernel_addr} - ${fdt_addr}"
     saveenv

 3. Poweroff, insert SD card with OpenWrt image, boot and enjoy.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>

1 files changed, 143 insertions, 0 deletions

diff --git a/target/linux/mvebu/patches-4.14/525-PCI-aardvark-use-isr1-instead-of-isr0-interrupt-in-legacy-irq-mode.patch b/target/linux/mvebu/patches-4.14/525-PCI-aardvark-use-isr1-instead-of-isr0-interrupt-in-legacy-irq-mode.patch
new file mode 100644
index 0000000000..777a078ef9
--- /dev/null
+++ b/target/linux/mvebu/patches-4.14/525-PCI-aardvark-use-isr1-instead-of-isr0-interrupt-in-legacy-irq-mode.patch
@@ -0,0 +1,143 @@
+From patchwork Thu Sep 28 12:58:35 2017
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v2,
+ 4/7] PCI: aardvark: use isr1 instead of isr0 interrupt in legacy irq
+ mode
+X-Patchwork-Submitter: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+X-Patchwork-Id: 819592
+Message-Id: <20170928125838.11887-5-thomas.petazzoni@free-electrons.com>
+To: Bjorn Helgaas <bhelgaas@google.com>, linux-pci@vger.kernel.org
+Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
+ Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>, Gregory Clement
+ <gregory.clement@free-electrons.com>, 
+ Nadav Haklai <nadavh@marvell.com>, Hanna Hawa <hannah@marvell.com>,
+ Yehuda Yitschak <yehuday@marvell.com>,
+ linux-arm-kernel@lists.infradead.org, Antoine Tenart
+ <antoine.tenart@free-electrons.com>, =?utf-8?q?Miqu=C3=A8l_Raynal?=
+ <miquel.raynal@free-electrons.com>, Victor Gu <xigu@marvell.com>,
+ Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+Date: Thu, 28 Sep 2017 14:58:35 +0200
+From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+List-Id: <linux-pci.vger.kernel.org>
+
+From: Victor Gu <xigu@marvell.com>
+
+The Aardvark has two interrupts sets:
+
+ - first set is bit[23:16] of PCIe ISR 0 register(RD0074840h)
+
+ - second set is bit[11:8] of PCIe ISR 1 register(RD0074848h)
+
+Only one set should be used, while another set should be masked.
+
+The second set, ISR1, is more advanced, the Legacy INT_X status bit is
+asserted once Assert_INTX message is received, and de-asserted after
+Deassert_INTX message is received. Therefore, it matches what the
+driver is currently doing in the ->irq_mask() and ->irq_unmask()
+functions. The ISR0 requires additional work to deassert the
+interrupt, which the driver doesn't do currently.
+
+This commit resolves a number of issues with legacy interrupts.
+
+This is part of fixing bug
+https://bugzilla.kernel.org/show_bug.cgi?id=196339, this commit was
+reported as the user to be important to get a Intel 7260 mini-PCIe
+WiFi card working.
+
+Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver")
+Signed-off-by: Victor Gu <xigu@marvell.com>
+Reviewed-by: Evan Wang <xswang@marvell.com>
+Reviewed-by: Nadav Haklai <nadavh@marvell.com>
+[Thomas: tweak commit log.]
+Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+---
+ drivers/pci/host/pci-aardvark.c | 41 ++++++++++++++++++++++++-----------------
+ 1 file changed, 24 insertions(+), 17 deletions(-)
+
+--- a/drivers/pci/host/pci-aardvark.c
++++ b/drivers/pci/host/pci-aardvark.c
+@@ -105,7 +105,8 @@
+ #define PCIE_ISR1_MASK_REG			(CONTROL_BASE_ADDR + 0x4C)
+ #define     PCIE_ISR1_POWER_STATE_CHANGE	BIT(4)
+ #define     PCIE_ISR1_FLUSH			BIT(5)
+-#define     PCIE_ISR1_ALL_MASK			GENMASK(5, 4)
++#define     PCIE_ISR1_INTX_ASSERT(val)		BIT(8 + (val))
++#define     PCIE_ISR1_ALL_MASK			GENMASK(11, 4)
+ #define PCIE_MSI_ADDR_LOW_REG			(CONTROL_BASE_ADDR + 0x50)
+ #define PCIE_MSI_ADDR_HIGH_REG			(CONTROL_BASE_ADDR + 0x54)
+ #define PCIE_MSI_STATUS_REG			(CONTROL_BASE_ADDR + 0x58)
+@@ -615,9 +616,9 @@ static void advk_pcie_irq_mask(struct ir
+ 	irq_hw_number_t hwirq = irqd_to_hwirq(d);
+ 	u32 mask;
+ 
+-	mask = advk_readl(pcie, PCIE_ISR0_MASK_REG);
+-	mask |= PCIE_ISR0_INTX_ASSERT(hwirq);
+-	advk_writel(pcie, mask, PCIE_ISR0_MASK_REG);
++	mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
++	mask |= PCIE_ISR1_INTX_ASSERT(hwirq);
++	advk_writel(pcie, mask, PCIE_ISR1_MASK_REG);
+ }
+ 
+ static void advk_pcie_irq_unmask(struct irq_data *d)
+@@ -626,9 +627,9 @@ static void advk_pcie_irq_unmask(struct
+ 	irq_hw_number_t hwirq = irqd_to_hwirq(d);
+ 	u32 mask;
+ 
+-	mask = advk_readl(pcie, PCIE_ISR0_MASK_REG);
+-	mask &= ~PCIE_ISR0_INTX_ASSERT(hwirq);
+-	advk_writel(pcie, mask, PCIE_ISR0_MASK_REG);
++	mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
++	mask &= ~PCIE_ISR1_INTX_ASSERT(hwirq);
++	advk_writel(pcie, mask, PCIE_ISR1_MASK_REG);
+ }
+ 
+ static int advk_pcie_irq_map(struct irq_domain *h,
+@@ -771,29 +772,35 @@ static void advk_pcie_handle_msi(struct
+ 
+ static void advk_pcie_handle_int(struct advk_pcie *pcie)
+ {
+-	u32 val, mask, status;
++	u32 isr0_val, isr0_mask, isr0_status;
++	u32 isr1_val, isr1_mask, isr1_status;
+ 	int i, virq;
+ 
+-	val = advk_readl(pcie, PCIE_ISR0_REG);
+-	mask = advk_readl(pcie, PCIE_ISR0_MASK_REG);
+-	status = val & ((~mask) & PCIE_ISR0_ALL_MASK);
+-
+-	if (!status) {
+-		advk_writel(pcie, val, PCIE_ISR0_REG);
++	isr0_val = advk_readl(pcie, PCIE_ISR0_REG);
++	isr0_mask = advk_readl(pcie, PCIE_ISR0_MASK_REG);
++	isr0_status = isr0_val & ((~isr0_mask) & PCIE_ISR0_ALL_MASK);
++
++	isr1_val = advk_readl(pcie, PCIE_ISR1_REG);
++	isr1_mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
++	isr1_status = isr1_val & ((~isr1_mask) & PCIE_ISR1_ALL_MASK);
++
++	if (!isr0_status && !isr1_status) {
++		advk_writel(pcie, isr0_val, PCIE_ISR0_REG);
++		advk_writel(pcie, isr1_val, PCIE_ISR1_REG);
+ 		return;
+ 	}
+ 
+ 	/* Process MSI interrupts */
+-	if (status & PCIE_ISR0_MSI_INT_PENDING)
++	if (isr0_status & PCIE_ISR0_MSI_INT_PENDING)
+ 		advk_pcie_handle_msi(pcie);
+ 
+ 	/* Process legacy interrupts */
+ 	for (i = 0; i < PCI_NUM_INTX; i++) {
+-		if (!(status & PCIE_ISR0_INTX_ASSERT(i)))
++		if (!(isr1_status & PCIE_ISR1_INTX_ASSERT(i)))
+ 			continue;
+ 
+-		advk_writel(pcie, PCIE_ISR0_INTX_ASSERT(i),
+-			    PCIE_ISR0_REG);
++		advk_writel(pcie, PCIE_ISR1_INTX_ASSERT(i),
++			    PCIE_ISR1_REG);
+ 
+ 		virq = irq_find_mapping(pcie->irq_domain, i);
+ 		generic_handle_irq(virq);