mvebu: add inital support for Marvell Armada XP/370 SoCs

This brings in the initial support for the Marvell Armada XP/370 SoCs.
Successfully tested on RD-A370-A1 and DB-MV784MP-GP boards the following
interfaces:

- Ethernet
- SDIO
- GPIOs
- SATA

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35058

1 files changed, 38 insertions, 0 deletions

diff --git a/target/linux/mvebu/patches-3.8/011-arm_mvebu_add_pin_mux_options_a370.patch b/target/linux/mvebu/patches-3.8/011-arm_mvebu_add_pin_mux_options_a370.patch
new file mode 100644
index 0000000000..6b245a0179
--- /dev/null
+++ b/target/linux/mvebu/patches-3.8/011-arm_mvebu_add_pin_mux_options_a370.patch
@@ -0,0 +1,38 @@
+The SDIO interface is available either on pins MPP9/11/12/13/14/15 or
+MPP47/48/49/50/51/52 on the Armada 370. Even though all combinations
+are potentially possible, those two muxing options are the most
+probable ones, so we provide those at the SoC level .dtsi file.
+
+In practice, in turns out the Armada 370 DB board uses the former,
+while the Armada 370 Mirabox uses the latter.
+
+Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+---
+ arch/arm/boot/dts/armada-370.dtsi |   12 ++++++++++++
+ 1 file changed, 12 insertions(+)
+
+diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
+index 636cf7d..88f9bab 100644
+--- a/arch/arm/boot/dts/armada-370.dtsi
++++ b/arch/arm/boot/dts/armada-370.dtsi
+@@ -47,6 +47,18 @@
+ 		pinctrl {
+ 			compatible = "marvell,mv88f6710-pinctrl";
+ 			reg = <0xd0018000 0x38>;
++
++			sdio_pins1: sdio-pins1 {
++			      marvell,pins = "mpp9",  "mpp11", "mpp12",
++					     "mpp13", "mpp14", "mpp15";
++			      marvell,function = "sd0";
++			};
++
++			sdio_pins2: sdio-pins2 {
++			      marvell,pins = "mpp47", "mpp48", "mpp49",
++					     "mpp50", "mpp51", "mpp52";
++			      marvell,function = "sd0";
++			};
+ 	        };
+ 
+ 		gpio0: gpio@d0018100 {
+-- 
+1.7.9.5