diff options
author | Ian Chang <ianchang@ieiworld.com> | 2021-09-02 17:47:20 +0800 |
---|---|---|
committer | Hauke Mehrtens <hauke@hauke-m.de> | 2021-09-09 23:36:13 +0200 |
commit | 70c75965a97799b44871249c205bad48fea9a4ae (patch) | |
tree | cbbc8c838cada74a1821b739860fae092454fcd0 /target/linux/mvebu/files/arch/arm64/boot | |
parent | c98ddf0f019986bbb4c868bfcaf97e0d1f4ee2dc (diff) | |
download | upstream-70c75965a97799b44871249c205bad48fea9a4ae.tar.gz upstream-70c75965a97799b44871249c205bad48fea9a4ae.tar.bz2 upstream-70c75965a97799b44871249c205bad48fea9a4ae.zip |
mvebu: add support for iEi Puzzle-M901/Puzzle-M902
Hardware specification
----------------------
* CN9130 SoC, Quad-core ARMv8 Cortex-72 @ 2200 MHz
* 4 GB DDR
* 4 GB eMMC
* mmcblk0
- mmcblk0p1 64M kernel_1
- mmcblk0p2 64M kernel_2
- mmcblk0p3 512M rootfs_1
- mmcblk0p4 512M rootfs_2
- mmcblk0p5 512M Reserved
- mmcblk0p6 64M Reserved
- mmcblk0p7 1.8G rootfs_data
* 4 MB (SPI Flash)
* 6 x 2.5 Gigabit ports (Puzzle-M901)
- External PHY with 6 ports (AQR112R)
* 6 x 2.5 Gigabit ports (Puzzle-M902)
- External PHY with 6 ports (AQR112R)
3 x 10 Gigabit ports (Puzzle-M902)
- External PHY with 3 ports (AQR113R)
* 4 x Front panel LED
* 1 x USB 3.0
* Reset button on Rear panel
* UART (115200 8N1,header on PCB)
Flash instructions:
The original firmware is based on OpenWrt.
Flash firmware using LuCI and CLI
Signed-off-by: Ian Chang <ianchang@ieiworld.com>
Diffstat (limited to 'target/linux/mvebu/files/arch/arm64/boot')
-rw-r--r-- | target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts | 319 | ||||
-rw-r--r-- | target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts | 481 |
2 files changed, 800 insertions, 0 deletions
diff --git a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts new file mode 100644 index 0000000000..58e749490a --- /dev/null +++ b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts @@ -0,0 +1,319 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9131-DB board. + */ + +#include "cn9130.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "iEi Puzzle-M901"; + compatible = "iei,puzzle-m901", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + i2c0 = &cp1_i2c0; + i2c1 = &cp0_i2c0; + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth2; + ethernet3 = &cp1_eth0; + ethernet4 = &cp1_eth1; + ethernet5 = &cp1_eth2; + gpio1 = &cp0_gpio1; + gpio2 = &cp0_gpio2; + gpio3 = &cp1_gpio1; + gpio4 = &cp1_gpio2; + }; + + memory@00000000 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&cp0_uart0 { + status = "okay"; +}; + +/* on-board eMMC - U9 */ +&ap_sdhci0 { + pinctrl-names = "default"; + bus-width = <8>; + status = "okay"; + mmc-ddr-1_8v; + mmc-hs400-1_8v; +}; + +&cp0_crypto { + status = "okay"; +}; + +&cp0_xmdio { + status = "okay"; + cp0_nbaset_phy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <2>; + }; + cp0_nbaset_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + }; + cp0_nbaset_phy2: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <8>; + }; +}; + +&cp0_ethernet { + status = "okay"; +}; + +/* SLM-1521-V2, CON9 */ +&cp0_eth0 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp0_comphy2 0>; + managed = "in-band-status"; +}; + +&cp0_eth1 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp0_comphy4 1>; + managed = "in-band-status"; +}; + +&cp0_eth2 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp0_comphy5 2>; + managed = "in-band-status"; +}; + +&cp0_gpio1 { + status = "okay"; +}; + +&cp0_gpio2 { + status = "okay"; +}; + +&cp0_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + status = "okay"; + clock-frequency = <100000>; + rtc@32 { + compatible = "epson,rx8130"; + reg = <0x32>; + wakeup-source; + }; +}; + +/* SLM-1521-V2, CON6 */ +&cp0_pcie0 { + status = "okay"; + num-lanes = <2>; + num-viewport = <8>; + phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>; +}; + +/* U55 */ +&cp0_spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_spi0_pins>; + reg = <0x700680 0x50>, /* control */ + <0x2000000 0x1000000>; /* CS0 */ + status = "okay"; + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <40000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "U-Boot"; + reg = <0x0 0x1f0000>; + }; + partition@1f0000 { + label = "U-Boot ENV Factory"; + reg = <0x1f0000 0x10000>; + }; + partition@200000 { + label = "Reserved"; + reg = <0x200000 0x1f0000>; + }; + partition@3f0000 { + label = "U-Boot ENV"; + reg = <0x3f0000 0x10000>; + }; + }; + }; +}; + +&cp0_syscon0 { + cp0_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + cp0_i2c0_pins: cp0-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp0_i2c1_pins: cp0-i2c-pins-1 { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 { + marvell,pins = "mpp0", "mpp1", "mpp2", + "mpp3", "mpp4", "mpp5", + "mpp6", "mpp7", "mpp8", + "mpp9", "mpp10", "mpp11"; + marvell,function = "ge0"; + }; + cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 { + marvell,pins = "mpp44", "mpp45", "mpp46", + "mpp47", "mpp48", "mpp49", + "mpp50", "mpp51", "mpp52", + "mpp53", "mpp54", "mpp55"; + marvell,function = "ge1"; + }; + cp0_spi0_pins: cp0-spi-pins-0 { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + }; +}; + +/* + * Instantiate the first connected CP115 + */ + +#define CP11X_NAME cp1 +#define CP11X_BASE f6000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f6600000 +#define CP11X_PCIE1_BASE f6620000 +#define CP11X_PCIE2_BASE f6640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +&cp1_crypto { + status = "okay"; +}; + +&cp1_xmdio { + status = "okay"; + cp1_nbaset_phy0: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <2>; + }; + cp1_nbaset_phy1: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + }; + cp1_nbaset_phy2: ethernet-phy@5 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <8>; + }; +}; + +&cp1_ethernet { + status = "okay"; +}; + +/* CON50 */ +&cp1_eth0 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp1_comphy2 0>; + managed = "in-band-status"; +}; + +&cp1_eth1 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp1_comphy4 1>; + managed = "in-band-status"; +}; + +&cp1_eth2 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp1_comphy5 2>; + managed = "in-band-status"; +}; + +&cp1_sata0 { + status = "okay"; + sata-port@1 { + status = "okay"; + phys = <&cp1_comphy0 1>; + }; +}; + +&cp1_gpio1 { + status = "okay"; +}; + +&cp1_gpio2 { + status = "okay"; +}; + +&cp1_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_i2c0_pins>; + clock-frequency = <100000>; +}; + +&cp1_syscon0 { + cp1_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + cp1_i2c0_pins: cp1-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp1_spi0_pins: cp1-spi-pins-0 { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + cp1_sfp_pins: sfp-pins { + marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11"; + marvell,function = "gpio"; + }; + }; +}; + +&cp1_usb3_1 { + status = "okay"; + phys = <&cp1_comphy3 1>; + phy-names = "usb"; +}; diff --git a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts new file mode 100644 index 0000000000..dc4e6527f1 --- /dev/null +++ b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts @@ -0,0 +1,481 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9132-DB board. + */ + +#include "cn9130.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "iEi Puzzle-M902"; + compatible = "iei,puzzle-m902", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + i2c0 = &cp1_i2c0; + i2c1 = &cp0_i2c0; + gpio1 = &cp0_gpio1; + gpio2 = &cp0_gpio2; + gpio3 = &cp1_gpio1; + gpio4 = &cp1_gpio2; + gpio5 = &cp2_gpio1; + gpio6 = &cp2_gpio2; + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth2; + ethernet3 = &cp1_eth0; + ethernet4 = &cp1_eth1; + ethernet5 = &cp1_eth2; + ethernet6 = &cp2_eth0; + ethernet7 = &cp2_eth1; + ethernet8 = &cp2_eth2; + spi1 = &cp0_spi0; + spi2 = &cp0_spi1; + serial1 = &cp0_uart0; + }; + + memory@00000000 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 { + compatible = "regulator-fixed"; + regulator-name = "cp2-xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>; + }; + + cp2_usb3_0_phy0: cp2_usb3_phy0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp2_reg_usb3_vbus0>; + }; + + cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 { + compatible = "regulator-fixed"; + regulator-name = "cp2-xhci1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>; + }; + + cp2_usb3_0_phy1: cp2_usb3_phy1 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp2_reg_usb3_vbus1>; + }; + + cp2_sfp_eth0: sfp-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&cp2_sfpp0_i2c>; + los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&cp0_uart0 { + status = "okay"; +}; + +/* on-board eMMC - U9 */ +&ap_sdhci0 { + pinctrl-names = "default"; + bus-width = <8>; + status = "okay"; + mmc-ddr-1_8v; + mmc-hs400-1_8v; +}; + +&cp0_crypto { + status = "okay"; +}; + +&cp0_xmdio { + status = "okay"; + cp0_nbaset_phy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <2>; + }; + cp0_nbaset_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + }; + cp0_nbaset_phy2: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <8>; + }; +}; + +&cp0_ethernet { + status = "okay"; +}; + +/* SLM-1521-V2, CON9 */ +&cp0_eth0 { + status = "okay"; + phy-mode = "10gbase-kr"; + phys = <&cp0_comphy2 0>; + managed = "in-band-status"; +}; + +&cp0_eth1 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp0_comphy4 1>; + managed = "in-band-status"; +}; + +&cp0_eth2 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp0_comphy1 2>; + managed = "in-band-status"; +}; + +&cp0_gpio1 { + status = "okay"; +}; + +&cp0_gpio2 { + status = "okay"; +}; + +&cp0_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + status = "okay"; + clock-frequency = <100000>; + rtc@32 { + compatible = "epson,rx8130"; + reg = <0x32>; + wakeup-source; + }; +}; + +&cp0_i2c1 { + clock-frequency = <100000>; +}; + +/* SLM-1521-V2, CON6 */ +&cp0_sata0 { + status = "okay"; + sata-port@1 { + status = "okay"; + phys = <&cp0_comphy0 1>; + }; +}; + +&cp0_pcie2 { + status = "okay"; + num-lanes = <1>; + num-viewport = <8>; + phys = <&cp0_comphy5 2>; +}; + +/* U55 */ +&cp0_spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_spi0_pins>; + reg = <0x700680 0x50>, /* control */ + <0x2000000 0x1000000>; /* CS0 */ + status = "okay"; + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <40000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "U-Boot"; + reg = <0x0 0x1f0000>; + }; + partition@1f0000 { + label = "U-Boot ENV Factory"; + reg = <0x1f0000 0x10000>; + }; + partition@200000 { + label = "Reserved"; + reg = <0x200000 0x1f0000>; + }; + partition@3f0000 { + label = "U-Boot ENV"; + reg = <0x3f0000 0x10000>; + }; + }; + }; +}; + +&cp0_syscon0 { + cp0_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + cp0_i2c0_pins: cp0-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp0_i2c1_pins: cp0-i2c-pins-1 { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 { + marvell,pins = "mpp0", "mpp1", "mpp2", + "mpp3", "mpp4", "mpp5", + "mpp6", "mpp7", "mpp8", + "mpp9", "mpp10", "mpp11"; + marvell,function = "ge0"; + }; + cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 { + marvell,pins = "mpp44", "mpp45", "mpp46", + "mpp47", "mpp48", "mpp49", + "mpp50", "mpp51", "mpp52", + "mpp53", "mpp54", "mpp55"; + marvell,function = "ge1"; + }; + cp0_spi0_pins: cp0-spi-pins-0 { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + }; +}; + +&cp0_usb3_1 { + status = "okay"; + phys = <&cp0_comphy3 1>; + phy-names = "usb"; +}; + +/* + * Instantiate the first connected CP115 + */ + +#define CP11X_NAME cp1 +#define CP11X_BASE f4000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f4600000 +#define CP11X_PCIE1_BASE f4620000 +#define CP11X_PCIE2_BASE f4640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +&cp1_crypto { + status = "okay"; +}; + +&cp1_xmdio { + status = "okay"; + cp1_nbaset_phy0: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <2>; + }; + cp1_nbaset_phy1: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + }; + cp1_nbaset_phy2: ethernet-phy@5 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <8>; + }; +}; + +&cp1_ethernet { + status = "okay"; +}; + +/* CON50 */ +&cp1_eth0 { + status = "okay"; + phy-mode = "10gbase-kr"; + phys = <&cp1_comphy2 0>; + managed = "in-band-status"; +}; + +&cp1_eth1 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp1_comphy4 1>; + managed = "in-band-status"; +}; + +&cp1_eth2 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp1_comphy1 2>; + managed = "in-band-status"; +}; + +&cp1_gpio1 { + status = "okay"; +}; + +&cp1_gpio2 { + status = "okay"; +}; + +&cp1_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_i2c0_pins>; + clock-frequency = <100000>; +}; + +&cp1_syscon0 { + cp1_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + cp1_i2c0_pins: cp1-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp1_spi0_pins: cp1-spi-pins-0 { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + }; +}; + +/* + * Instantiate the second connected CP115 + */ + +#define CP11X_NAME cp2 +#define CP11X_BASE f6000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f6600000 +#define CP11X_PCIE1_BASE f6620000 +#define CP11X_PCIE2_BASE f6640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +&cp2_crypto { + status = "okay"; +}; + +&cp2_ethernet { + status = "okay"; +}; + +&cp2_xmdio { + status = "okay"; + cp2_nbaset_phy0: ethernet-phy@6 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <2>; + }; + cp2_nbaset_phy1: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + }; + cp2_nbaset_phy2: ethernet-phy@8 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <8>; + }; +}; + +/* SLM-1521-V2, CON9 */ +&cp2_eth0 { + status = "okay"; + phy-mode = "10gbase-kr"; + phys = <&cp2_comphy2 0>; + managed = "in-band-status"; +}; + +&cp2_eth1 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp2_comphy4 1>; + managed = "in-band-status"; +}; + +&cp2_eth2 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp2_comphy1 2>; + managed = "in-band-status"; +}; + +&cp2_gpio1 { + status = "okay"; +}; + +&cp2_gpio2 { + status = "okay"; +}; + +&cp2_i2c0 { + clock-frequency = <100000>; + /* SLM-1521-V2 - U3 */ + i2c-mux@72 { + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + cp2_sfpp0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* U12 */ + cp2_module_expander1: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + }; + }; + }; +}; + +&cp2_syscon0 { + cp2_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + cp2_i2c0_pins: cp2-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + }; +}; |