diff options
author | Hauke Mehrtens <hauke@hauke-m.de> | 2017-12-23 17:45:23 +0100 |
---|---|---|
committer | Hauke Mehrtens <hauke@hauke-m.de> | 2018-02-13 22:24:56 +0100 |
commit | 47106f55e0b630ea448ea4e5be67b6791c0d7a93 (patch) | |
tree | fdedc943b30dd4fffc5f0f41b874bfdfde985fd8 /target/linux/mvebu/files-4.9/arch/arm/boot/dts/armada-385-linksys-rango.dts | |
parent | 80771af83d0ee36df3788cc4d88919ff95d57604 (diff) | |
download | upstream-47106f55e0b630ea448ea4e5be67b6791c0d7a93.tar.gz upstream-47106f55e0b630ea448ea4e5be67b6791c0d7a93.tar.bz2 upstream-47106f55e0b630ea448ea4e5be67b6791c0d7a93.zip |
mvebu: move files to files-4.9 and files-4.4 folder
This is needed to prevent copying it into kernel 4.14.
These device tree files are already integrated into kernel 4.14 and we
would like to use the upstream versions only.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Diffstat (limited to 'target/linux/mvebu/files-4.9/arch/arm/boot/dts/armada-385-linksys-rango.dts')
-rw-r--r-- | target/linux/mvebu/files-4.9/arch/arm/boot/dts/armada-385-linksys-rango.dts | 453 |
1 files changed, 453 insertions, 0 deletions
diff --git a/target/linux/mvebu/files-4.9/arch/arm/boot/dts/armada-385-linksys-rango.dts b/target/linux/mvebu/files-4.9/arch/arm/boot/dts/armada-385-linksys-rango.dts new file mode 100644 index 0000000000..de1de79da9 --- /dev/null +++ b/target/linux/mvebu/files-4.9/arch/arm/boot/dts/armada-385-linksys-rango.dts @@ -0,0 +1,453 @@ +/* + * Device Tree file for the Linksys WRT3200ACM (Rango) + * + * Copyright (C) 2016 Imre Kaloz <kaloz@openwrt.org> + * + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "armada-385.dtsi" + +/ { + model = "Linksys WRT3200ACM"; + compatible = "linksys,rango", "linksys,armada385", "marvell,armada385", + "marvell,armada380"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; + + internal-regs { + + spi@10600 { + status = "disabled"; + }; + + i2c@11000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + tmp421@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; + + pca9635@68 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,pca9635"; + reg = <0x68>; + + wan_amber@0 { + label = "rango:amber:wan"; + reg = <0x0>; + }; + + wan_white@1 { + label = "rango:white:wan"; + reg = <0x1>; + }; + + usb2@5 { + label = "rango:white:usb2"; + reg = <0x5>; + }; + + usb3_1@6 { + label = "rango:white:usb3_1"; + reg = <0x6>; + }; + + usb3_2@7 { + label = "rango:white:usb3_2"; + reg = <0x7>; + }; + + wps_white@8 { + label = "rango:white:wps"; + reg = <0x8>; + }; + + wps_amber@9 { + label = "rango:amber:wps"; + reg = <0x9>; + }; + }; + }; + + /* J10: VCC, NC, RX, NC, TX, GND */ + serial@12000 { + status = "okay"; + }; + + ethernet@70000 { + status = "okay"; + phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <3>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + ethernet@34000 { + status = "okay"; + phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <3>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + mdio { + status = "okay"; + }; + + bm@c8000 { + status = "okay"; + }; + + sata@a8000 { + status = "okay"; + }; + + sdhci@d8000 { + pinctrl-names = "default"; + pinctrl-0 = <&sdhci_pins>; + no-1-8-v; + broken-cd; + wp-inverted; + bus-width = <8>; + status = "okay"; + }; + + /* USB part of the eSATA/USB 2.0 port */ + usb@58000 { + status = "okay"; + }; + + usb3@f8000 { + status = "okay"; + usb-phy = <&usb3_phy>; + }; + + flash@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x200000>; /* 2MB */ + read-only; + }; + + partition@200000 { + label = "u_env"; + reg = <0x200000 0x20000>; /* 128KB */ + }; + + partition@220000 { + label = "s_env"; + reg = <0x220000 0x40000>; /* 256KB */ + }; + + partition@7e0000 { + label = "devinfo"; + reg = <0x7e0000 0x40000>; /* 256KB */ + read-only; + }; + + partition@820000 { + label = "sysdiag"; + reg = <0x820000 0x1e0000>; /* 1920KB */ + read-only; + }; + + /* kernel1 overlaps with rootfs1 by design */ + partition@a00000 { + label = "kernel1"; + reg = <0xa00000 0x5000000>; /* 80MB */ + }; + + partition@1000000 { + label = "rootfs1"; + reg = <0x1000000 0x4a00000>; /* 74MB */ + }; + + /* kernel2 overlaps with rootfs2 by design */ + partition@5a00000 { + label = "kernel2"; + reg = <0x5a00000 0x5000000>; /* 80MB */ + }; + + partition@6000000 { + label = "rootfs2"; + reg = <0x6000000 0x4a00000>; /* 74MB */ + }; + + /* + * 86MB, last MB is for the BBT, not writable + */ + partition@aa00000 { + label = "syscfg"; + reg = <0xaa00000 0x5600000>; + }; + + /* + * Unused area between "s_env" and "devinfo". + * Moved here because otherwise the renumbered + * partitions would break the bootloader + * supplied bootargs + */ + partition@180000 { + label = "unused_area"; + reg = <0x260000 0x5c0000>; /* 5.75MB */ + }; + }; + }; + + bm-bppi { + status = "okay"; + }; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + /* Marvell 88W8964, 5GHz-only */ + status = "okay"; + + mwlwifi { + marvell,2ghz = <0>; + marvell,chainmask = <4 4>; + }; + + }; + + pcie@2,0 { + /* Marvell 88W8964, 2GHz-only */ + status = "okay"; + + mwlwifi { + marvell,5ghz = <0>; + marvell,chainmask = <4 4>; + }; + + }; + }; + }; + + usb3_phy: usb3_phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_xhci0_vbus>; + }; + + reg_xhci0_vbus: xhci0-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&xhci0_vbus_pins>; + regulator-name = "xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&reset_key_pin &wps_key_pin>; + pinctrl-names = "default"; + + button@1 { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + }; + + button@2 { + label = "Factory Reset Button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&power_led_pin &sata_led_pin &wlan_2g_led_pin &wlan_5g_led_pin>; + pinctrl-names = "default"; + + sata { + label = "rango:white:sata"; + gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + linux,default-trigger = "disk-activity"; + }; + + wlan_2g { + label = "rango:white:wlan_2g"; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + }; + + wlan_5g { + label = "rango:white:wlan_5g"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + + power { + label = "rango:white:power"; + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + dsa@0 { + compatible = "marvell,dsa"; + #address-cells = <2>; + #size-cells = <0>; + + dsa,ethernet = <ð2>; + dsa,mii-bus = <&mdio>; + + switch@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0>; /* MDIO address 0, switch 0 in tree */ + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + }; + }; + }; + + mvsw61xx { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,88e6352"; + status = "okay"; + reg = <0x10>; + + mii-bus = <&mdio>; + cpu-port-0 = <5>; + cpu-port-1 = <6>; + }; + +}; + +&pinctrl { + sata_led_pin: sata-led-pin { + marvell,pins = "mpp21"; + marvell,function = "gpio"; + }; + + wps_key_pin: wps-key-pin { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + + reset_key_pin: reset-key-pin { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + wlan_2g_led_pin: wlan-2g-led-pin { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + + wlan_5g_led_pin: wlan-5g-led-pin { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + + xhci0_vbus_pins: xhci0-vbus-pins { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + + power_led_pin: power-led-pin { + marvell,pins = "mpp56"; + marvell,function = "gpio"; + }; +}; |