aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mvebu/cortexa72/base-files
diff options
context:
space:
mode:
authorIan Chang <ianchang@ieiworld.com>2021-09-02 17:47:20 +0800
committerHauke Mehrtens <hauke@hauke-m.de>2021-09-09 23:36:13 +0200
commit70c75965a97799b44871249c205bad48fea9a4ae (patch)
treecbbc8c838cada74a1821b739860fae092454fcd0 /target/linux/mvebu/cortexa72/base-files
parentc98ddf0f019986bbb4c868bfcaf97e0d1f4ee2dc (diff)
downloadupstream-70c75965a97799b44871249c205bad48fea9a4ae.tar.gz
upstream-70c75965a97799b44871249c205bad48fea9a4ae.tar.bz2
upstream-70c75965a97799b44871249c205bad48fea9a4ae.zip
mvebu: add support for iEi Puzzle-M901/Puzzle-M902
Hardware specification ---------------------- * CN9130 SoC, Quad-core ARMv8 Cortex-72 @ 2200 MHz * 4 GB DDR * 4 GB eMMC * mmcblk0 - mmcblk0p1 64M kernel_1 - mmcblk0p2 64M kernel_2 - mmcblk0p3 512M rootfs_1 - mmcblk0p4 512M rootfs_2 - mmcblk0p5 512M Reserved - mmcblk0p6 64M Reserved - mmcblk0p7 1.8G rootfs_data * 4 MB (SPI Flash) * 6 x 2.5 Gigabit ports (Puzzle-M901) - External PHY with 6 ports (AQR112R) * 6 x 2.5 Gigabit ports (Puzzle-M902) - External PHY with 6 ports (AQR112R) 3 x 10 Gigabit ports (Puzzle-M902) - External PHY with 3 ports (AQR113R) * 4 x Front panel LED * 1 x USB 3.0 * Reset button on Rear panel * UART (115200 8N1,header on PCB) Flash instructions: The original firmware is based on OpenWrt. Flash firmware using LuCI and CLI Signed-off-by: Ian Chang <ianchang@ieiworld.com>
Diffstat (limited to 'target/linux/mvebu/cortexa72/base-files')
-rwxr-xr-x[-rw-r--r--]target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network6
-rwxr-xr-xtarget/linux/mvebu/cortexa72/base-files/lib/upgrade/emmc-puzzle.sh36
-rwxr-xr-xtarget/linux/mvebu/cortexa72/base-files/lib/upgrade/platform.sh8
3 files changed, 50 insertions, 0 deletions
diff --git a/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network b/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network
index dbffd00223..f185a88347 100644..100755
--- a/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network
+++ b/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network
@@ -10,6 +10,12 @@ board_config_update
board=$(board_name)
case "$board" in
+iei,puzzle-m901)
+ ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4 eth5" "eth0"
+ ;;
+iei,puzzle-m902)
+ ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4 eth5 eth10 eth11 eth12" "eth0"
+ ;;
marvell,armada8040-mcbin-doubleshot|\
marvell,armada8040-mcbin-singleshot)
ucidef_set_interfaces_lan_wan "eth0 eth1 eth3" "eth2"
diff --git a/target/linux/mvebu/cortexa72/base-files/lib/upgrade/emmc-puzzle.sh b/target/linux/mvebu/cortexa72/base-files/lib/upgrade/emmc-puzzle.sh
new file mode 100755
index 0000000000..5e5c356ed6
--- /dev/null
+++ b/target/linux/mvebu/cortexa72/base-files/lib/upgrade/emmc-puzzle.sh
@@ -0,0 +1,36 @@
+platform_do_upgrade_emmc() {
+ local board=$(board_name)
+ local diskdev partdev
+
+ export_bootdevice && export_partdevice diskdev 0 || {
+ v "Unable to determine upgrade device"
+ return 1
+ }
+ sync
+ if [ "$UPGRADE_OPT_SAVE_PARTITIONS" = "1" ]; then
+ get_partitions "/dev/$diskdev" bootdisk
+ v "Extract boot sector from the image"
+ get_image_dd "$1" of=/tmp/image.bs count=1 bs=512b
+ get_partitions /tmp/image.bs image
+ fi
+
+ #iterate over each partition from the image and write it to the boot disk
+ while read part start size; do
+ if export_partdevice partdev $part; then
+ if [ "$partdev" = "mmcblk0p2" ]; then
+ v "Writing image mmcblk0p3 for /dev/$partdev $start $size"
+ get_image_dd "$1" of="/dev/mmcblk0p3" ibs="512" obs=1M skip="$start" count="$size" conv=fsync
+ elif [ "$partdev" = "mmcblk0p1" ]; then
+ v "Writing image mmcblk0p1 for /dev/$partdev $start $size"
+ get_image_dd "$1" of="/dev/$partdev" ibs="512" obs=1M skip="$start" count="$size" conv=fsync
+ fi
+ else
+ v "Unable to find partition $part device, skipped."
+ fi
+ done < /tmp/partmap.image
+
+ v "Writing new UUID to /dev/$diskdev..."
+ get_image_dd "$1" of="/dev/$diskdev" bs=1 skip=440 count=4 seek=440 conv=fsync
+
+ sleep 1
+}
diff --git a/target/linux/mvebu/cortexa72/base-files/lib/upgrade/platform.sh b/target/linux/mvebu/cortexa72/base-files/lib/upgrade/platform.sh
index 74aad434ea..f5eb261d99 100755
--- a/target/linux/mvebu/cortexa72/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mvebu/cortexa72/base-files/lib/upgrade/platform.sh
@@ -9,6 +9,8 @@ REQUIRE_IMAGE_METADATA=1
platform_check_image() {
case "$(board_name)" in
+ iei,puzzle-m901|\
+ iei,puzzle-m902|\
marvell,armada8040-mcbin-doubleshot|\
marvell,armada8040-mcbin-singleshot)
legacy_sdcard_check_image "$1"
@@ -21,6 +23,10 @@ platform_check_image() {
platform_do_upgrade() {
case "$(board_name)" in
+ iei,puzzle-m901|\
+ iei,puzzle-m902)
+ platform_do_upgrade_emmc "$1"
+ ;;
marvell,armada8040-mcbin-doubleshot|\
marvell,armada8040-mcbin-singleshot)
legacy_sdcard_do_upgrade "$1"
@@ -32,6 +38,8 @@ platform_do_upgrade() {
}
platform_copy_config() {
case "$(board_name)" in
+ iei,puzzle-m901|\
+ iei,puzzle-m902|\
marvell,armada8040-mcbin-doubleshot|\
marvell,armada8040-mcbin-singleshot)
legacy_sdcard_copy_config