diff options
author | Ian Chang <ianchang@ieiworld.com> | 2021-09-02 17:47:20 +0800 |
---|---|---|
committer | Hauke Mehrtens <hauke@hauke-m.de> | 2021-09-09 23:36:13 +0200 |
commit | 70c75965a97799b44871249c205bad48fea9a4ae (patch) | |
tree | cbbc8c838cada74a1821b739860fae092454fcd0 /target/linux/mvebu/cortexa72/base-files/etc/board.d | |
parent | c98ddf0f019986bbb4c868bfcaf97e0d1f4ee2dc (diff) | |
download | upstream-70c75965a97799b44871249c205bad48fea9a4ae.tar.gz upstream-70c75965a97799b44871249c205bad48fea9a4ae.tar.bz2 upstream-70c75965a97799b44871249c205bad48fea9a4ae.zip |
mvebu: add support for iEi Puzzle-M901/Puzzle-M902
Hardware specification
----------------------
* CN9130 SoC, Quad-core ARMv8 Cortex-72 @ 2200 MHz
* 4 GB DDR
* 4 GB eMMC
* mmcblk0
- mmcblk0p1 64M kernel_1
- mmcblk0p2 64M kernel_2
- mmcblk0p3 512M rootfs_1
- mmcblk0p4 512M rootfs_2
- mmcblk0p5 512M Reserved
- mmcblk0p6 64M Reserved
- mmcblk0p7 1.8G rootfs_data
* 4 MB (SPI Flash)
* 6 x 2.5 Gigabit ports (Puzzle-M901)
- External PHY with 6 ports (AQR112R)
* 6 x 2.5 Gigabit ports (Puzzle-M902)
- External PHY with 6 ports (AQR112R)
3 x 10 Gigabit ports (Puzzle-M902)
- External PHY with 3 ports (AQR113R)
* 4 x Front panel LED
* 1 x USB 3.0
* Reset button on Rear panel
* UART (115200 8N1,header on PCB)
Flash instructions:
The original firmware is based on OpenWrt.
Flash firmware using LuCI and CLI
Signed-off-by: Ian Chang <ianchang@ieiworld.com>
Diffstat (limited to 'target/linux/mvebu/cortexa72/base-files/etc/board.d')
-rwxr-xr-x[-rw-r--r--] | target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network b/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network index dbffd00223..f185a88347 100644..100755 --- a/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network +++ b/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network @@ -10,6 +10,12 @@ board_config_update board=$(board_name) case "$board" in +iei,puzzle-m901) + ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4 eth5" "eth0" + ;; +iei,puzzle-m902) + ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4 eth5 eth10 eth11 eth12" "eth0" + ;; marvell,armada8040-mcbin-doubleshot|\ marvell,armada8040-mcbin-singleshot) ucidef_set_interfaces_lan_wan "eth0 eth1 eth3" "eth2" |