mvebu: add support for the Linksys WRT1900ACS (Shelby)

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 47164

8 files changed, 17 insertions, 6 deletions

diff --git a/target/linux/mvebu/base-files/etc/init.d/linksys_recovery b/target/linux/mvebu/base-files/etc/init.d/linksys_recovery
index 60d7be0636..d9cae7b2cf 100755
--- a/target/linux/mvebu/base-files/etc/init.d/linksys_recovery
+++ b/target/linux/mvebu/base-files/etc/init.d/linksys_recovery
@@ -7,7 +7,7 @@ boot() {
 . /lib/mvebu.sh
 
 case $(mvebu_board_name) in
-	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-xp-linksys-mamba)
+	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby|armada-xp-linksys-mamba)
 		# make sure auto_recovery in uboot is always on
 		AUTO_RECOVERY_ENA="`fw_printenv -n auto_recovery`"
 		if [ "$AUTO_RECOVERY_ENA" != "yes" ] ; then
diff --git a/target/linux/mvebu/base-files/etc/uci-defaults/01_leds b/target/linux/mvebu/base-files/etc/uci-defaults/01_leds
index 50c2f8d231..612f949da4 100644
--- a/target/linux/mvebu/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/mvebu/base-files/etc/uci-defaults/01_leds
@@ -19,6 +19,11 @@ armada-385-linksys-cobra)
 	ucidef_set_led_usbdev "usb2" "USB2" "pca963x:cobra:white:usb2" "1-1"
 	ucidef_set_led_usbdev "usb3" "USB3" "pca963x:cobra:white:usb3_1" "2-1"
 	;;
+armada-385-linksys-shelby)
+	ucidef_set_led_netdev "wan" "WAN" "pca963x:shelby:white:wan" "eth0"
+	ucidef_set_led_usbdev "usb2" "USB2" "pca963x:shelby:white:usb2" "1-1"
+	ucidef_set_led_usbdev "usb3" "USB3" "pca963x:shelby:white:usb3_1" "2-1"
+	;;
 armada-xp-linksys-mamba)
 	ucidef_set_led_netdev "wan" "WAN" "mamba:white:wan" "eth1"
 	ucidef_set_led_usbdev "usb2" "USB2" "mamba:white:usb2" "1-1"
diff --git a/target/linux/mvebu/base-files/etc/uci-defaults/02_network b/target/linux/mvebu/base-files/etc/uci-defaults/02_network
index d1ead03b00..d1da59fb48 100644
--- a/target/linux/mvebu/base-files/etc/uci-defaults/02_network
+++ b/target/linux/mvebu/base-files/etc/uci-defaults/02_network
@@ -21,6 +21,9 @@ armada-385-linksys-caiman)
 armada-385-linksys-cobra)
 	ucidef_set_interfaces_lan_wan "eth1" "eth0"
 	;;
+armada-385-linksys-shelby)
+	ucidef_set_interfaces_lan_wan "eth1" "eth0"
+	;;
 armada-xp-linksys-mamba)
 	ucidef_set_interfaces_lan_wan "eth0" "eth1"
 	ucidef_add_switch "switch0" "1" "1"
diff --git a/target/linux/mvebu/base-files/etc/uci-defaults/03_wireless b/target/linux/mvebu/base-files/etc/uci-defaults/03_wireless
index c5d670a0ba..fcf43ee1f3 100644
--- a/target/linux/mvebu/base-files/etc/uci-defaults/03_wireless
+++ b/target/linux/mvebu/base-files/etc/uci-defaults/03_wireless
@@ -10,7 +10,7 @@
 board=$(mvebu_board_name)
 
 case "$board" in
-armada-385-linksys-caiman|armada-385-linksys-cobra|armada-xp-linksys-mamba)
+armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby|armada-xp-linksys-mamba)
 	SKU=$(strings /dev/mtd3|sed -ne 's/^cert_region=//p')
 	case "$SKU" in
 		AP)
diff --git a/target/linux/mvebu/base-files/lib/mvebu.sh b/target/linux/mvebu/base-files/lib/mvebu.sh
index 3edfa6bbb4..09ebff3edc 100755
--- a/target/linux/mvebu/base-files/lib/mvebu.sh
+++ b/target/linux/mvebu/base-files/lib/mvebu.sh
@@ -40,6 +40,9 @@ mvebu_board_detect() {
 	*"Linksys WRT1900ACv2")
 		name="armada-385-linksys-cobra"
 		;;
+	*"Linksys WRT1900ACS")
+		name="armada-385-linksys-shelby"
+		;;
 	*"Marvell Armada 385 Access Point Development Board")
 		name="armada-385-db-ap"
 		;;
diff --git a/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac b/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
index 9fc8d9a0ce..876c08b771 100644
--- a/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
@@ -14,7 +14,7 @@ preinit_set_mac_address() {
 		ifconfig eth0 hw ether $mac 2>/dev/null
 		ifconfig eth1 hw ether $mac 2>/dev/null
 		;;
-	armada-385-linksys-caiman|armada-385-linksys-cobra)
+	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby)
 		mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
 		mac_wan=$(macaddr_setbit_la "$mac")
 		ifconfig eth1 hw ether $mac 2>/dev/null
diff --git a/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg b/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg
index d665cb14aa..a54226f00c 100644
--- a/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg
+++ b/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg
@@ -8,7 +8,7 @@ preinit_mount_syscfg() {
 	. /lib/mvebu.sh
 
 	case $(mvebu_board_name) in
-	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-xp-linksys-mamba)
+	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby|armada-xp-linksys-mamba)
 		needs_recovery=0
 		ubiattach -m 8 || needs_recovery=1
 		if [ $needs_recovery -eq 1 ]
diff --git a/target/linux/mvebu/base-files/lib/upgrade/platform.sh b/target/linux/mvebu/base-files/lib/upgrade/platform.sh
index 5e9c04b600..2f699a745f 100755
--- a/target/linux/mvebu/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mvebu/base-files/lib/upgrade/platform.sh
@@ -13,7 +13,7 @@ platform_check_image() {
 	[ "$#" -gt 1 ] && return 1
 
 	case "$board" in
-	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-xp-linksys-mamba)
+	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby|armada-xp-linksys-mamba)
 		[ "$magic_long" != "27051956" -a "$magic_long" != "73797375" ] && {
 			echo "Invalid image type."
 			return 1
@@ -30,7 +30,7 @@ platform_do_upgrade() {
 	local board=$(mvebu_board_name)
 
 	case "$board" in
-	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-xp-linksys-mamba)
+	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby|armada-xp-linksys-mamba)
 		platform_do_upgrade_linksys "$ARGV"
 		;;
 	*)