mvebu: add support for WRT32X (venom)

Linksys WRT32X (Venom) is identical in hardware to the WRT3200ACM
with a different flash layout and boots zImage rather than uImage.

Specification:
- Marvell Armada 385 88F6820 (2x 1.8GHz)
- 256MB of Flash
- 512MB of RAM
- 2.4GHz (bgn) and 5GHz (an+ac wave 2)
- 4x 1Gbps LAN + 1x 1Gbps WAN
- 1x USB 3.0 and 1x USB 2.0/eSATA (combo port)

Flash instruction:
Apply factory image via web-gui.

Signed-off-by: Michael Gray <michael.gray@lantisproject.com>

10 files changed, 20 insertions, 7 deletions

diff --git a/target/linux/mvebu/base-files/etc/board.d/01_leds b/target/linux/mvebu/base-files/etc/board.d/01_leds
index 84519907af..ff8d4a21c0 100755
--- a/target/linux/mvebu/base-files/etc/board.d/01_leds
+++ b/target/linux/mvebu/base-files/etc/board.d/01_leds
@@ -35,6 +35,12 @@ armada-385-linksys-shelby)
 	ucidef_set_led_usbport "usb2" "USB 2" "pca963x:shelby:white:usb3_1" "usb2-port1" "usb3-port1"
 	ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:shelby:white:usb3_2" "usb3-port1"
 	;;
+armada-385-linksys-venom)
+	ucidef_set_led_netdev "wan" "WAN" "pca963x:venom:blue:wan" "eth1"
+	ucidef_set_led_usbport "usb1" "USB 1" "pca963x:venom:blue:usb2" "usb1-port1"
+	ucidef_set_led_usbport "usb2" "USB 2" "pca963x:venom:blue:usb3_1" "usb2-port1" "usb3-port1"
+	ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:venom:blue:usb3_2" "usb3-port1"
+	;;
 armada-xp-linksys-mamba)
 	ucidef_set_led_netdev "wan" "WAN" "mamba:white:wan" "eth1"
 	ucidef_set_led_usbport "usb1" "USB 1" "mamba:white:usb2" "usb1-port1"
diff --git a/target/linux/mvebu/base-files/etc/board.d/02_network b/target/linux/mvebu/base-files/etc/board.d/02_network
index 8e57e8e1ce..66d35dda70 100755
--- a/target/linux/mvebu/base-files/etc/board.d/02_network
+++ b/target/linux/mvebu/base-files/etc/board.d/02_network
@@ -18,6 +18,7 @@ armada-385-linksys-caiman|\
 armada-385-linksys-cobra|\
 armada-385-linksys-rango|\
 armada-385-linksys-shelby|\
+armada-385-linksys-venom|\
 armada-xp-linksys-mamba)
 	ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2"
 	ucidef_add_switch "switch0" \
diff --git a/target/linux/mvebu/base-files/etc/diag.sh b/target/linux/mvebu/base-files/etc/diag.sh
index 4a3f54ed2c..327a82df93 100644
--- a/target/linux/mvebu/base-files/etc/diag.sh
+++ b/target/linux/mvebu/base-files/etc/diag.sh
@@ -19,6 +19,9 @@ get_status_led() {
 	armada-385-linksys-shelby)
 		status_led="shelby:white:power"
 		;;
+	armada-385-linksys-venom)
+		status_led="venom:blue:power"
+		;;
 	armada-xp-linksys-mamba)
 		status_led="mamba:white:power"
 		;;
diff --git a/target/linux/mvebu/base-files/etc/init.d/linksys_recovery b/target/linux/mvebu/base-files/etc/init.d/linksys_recovery
index c1532ac2c1..520b8aac54 100755
--- a/target/linux/mvebu/base-files/etc/init.d/linksys_recovery
+++ b/target/linux/mvebu/base-files/etc/init.d/linksys_recovery
@@ -7,7 +7,7 @@ boot() {
 . /lib/functions.sh
 
 case $(board_name) in
-	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-xp-linksys-mamba)
+	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-385-linksys-venom|armada-xp-linksys-mamba)
 		# make sure auto_recovery in uboot is always on
 		AUTO_RECOVERY_ENA="`fw_printenv -n auto_recovery`"
 		if [ "$AUTO_RECOVERY_ENA" != "yes" ] ; then
diff --git a/target/linux/mvebu/base-files/etc/uci-defaults/03_wireless b/target/linux/mvebu/base-files/etc/uci-defaults/03_wireless
index baf4a20721..6fb24c8d4f 100644
--- a/target/linux/mvebu/base-files/etc/uci-defaults/03_wireless
+++ b/target/linux/mvebu/base-files/etc/uci-defaults/03_wireless
@@ -11,7 +11,7 @@
 board=$(board_name)
 
 case "$board" in
-armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby|armada-xp-linksys-mamba)
+armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby|armada-385-linksys-venom|armada-xp-linksys-mamba)
 	SKU=$(strings /dev/mtd3|sed -ne 's/^cert_region=//p')
 	WIFIMAC2G=$(macaddr_add $(cat /sys/class/net/eth0/address) +1)
 	WIFIMAC5G=$(macaddr_add $WIFIMAC2G +1)
diff --git a/target/linux/mvebu/base-files/lib/mvebu.sh b/target/linux/mvebu/base-files/lib/mvebu.sh
index 840cc1ca2a..33ac832399 100755
--- a/target/linux/mvebu/base-files/lib/mvebu.sh
+++ b/target/linux/mvebu/base-files/lib/mvebu.sh
@@ -53,6 +53,9 @@ mvebu_board_detect() {
 	*"Linksys WRT3200ACM")
 		name="armada-385-linksys-rango"
 		;;
+	*"Linksys WRT32X")
+		name="armada-385-linksys-venom"
+		;;
 	*"Marvell Armada 385 Access Point Development Board")
 		name="armada-385-db-ap"
 		;;
diff --git a/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac b/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
index b56cbf50ad..534a271efb 100644
--- a/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
@@ -14,7 +14,7 @@ preinit_set_mac_address() {
 		ip link set dev eth0 address $mac 2>/dev/null
 		ip link set dev eth1 address $mac 2>/dev/null
 		;;
-	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby)
+	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-385-linksys-venom)
 		# rename interfaces back to the way they were with 4.4
 		case "$(readlink /sys/class/net/eth0)" in
 			*f1070000*)
diff --git a/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg b/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg
index c55c1f5c5a..cf7a22c4f6 100644
--- a/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg
+++ b/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg
@@ -8,7 +8,7 @@ preinit_mount_syscfg() {
 	. /lib/functions.sh
 
 	case $(board_name) in
-	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-xp-linksys-mamba)
+	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-385-linksys-venom|armada-xp-linksys-mamba)
 		needs_recovery=0
 		syscfg_part=$(grep syscfg /proc/mtd |cut -c4)
 		ubiattach -m $syscfg_part || needs_recovery=1
diff --git a/target/linux/mvebu/base-files/lib/upgrade/linksys.sh b/target/linux/mvebu/base-files/lib/upgrade/linksys.sh
index 63d1cd14a4..aacaf55667 100644
--- a/target/linux/mvebu/base-files/lib/upgrade/linksys.sh
+++ b/target/linux/mvebu/base-files/lib/upgrade/linksys.sh
@@ -55,7 +55,7 @@ platform_do_upgrade_linksys() {
 
 		nand_upgrade_tar "$1"
 	}
-	[ "$magic_long" = "27051956" ] && {
+	[ "$magic_long" = "27051956" -o "$magic_long" = "0000a0e1" ] && {
 		# check firmwares' rootfs types
 		local target_mtd=$(find_mtd_part $part_label)
 		local oldroot="$(linksys_get_root_magic $target_mtd)"
diff --git a/target/linux/mvebu/base-files/lib/upgrade/platform.sh b/target/linux/mvebu/base-files/lib/upgrade/platform.sh
index 15c5433792..e4ccf9d7f2 100755
--- a/target/linux/mvebu/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mvebu/base-files/lib/upgrade/platform.sh
@@ -13,7 +13,7 @@ platform_check_image() {
 
 platform_do_upgrade() {
 	case "$(board_name)" in
-	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-xp-linksys-mamba)
+	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-385-linksys-venom|armada-xp-linksys-mamba)
 		platform_do_upgrade_linksys "$ARGV"
 		;;
 	armada-385-turris-omnia|armada-388-clearfog-base|armada-388-clearfog-pro|globalscale,espressobin|marvell,armada8040-mcbin)
@@ -26,7 +26,7 @@ platform_do_upgrade() {
 }
 platform_copy_config() {
 	case "$(board_name)" in
-	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-xp-linksys-mamba)
+	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-385-linksys-venom|armada-xp-linksys-mamba)
 		platform_copy_config_linksys
 		;;
 	armada-385-turris-omnia|armada-388-clearfog-base|armada-388-clearfog-pro|globalscale,espressobin|marvell,armada8040-mcbin)