mvebu: split base-files across subtargets

For the mvebu target in particular, there is a lot of files in
base-files that are only relevant for one subtarget. Improve
overview and reduce size per subtarget by moving/splitting
base-files depending on the subtarget they belong to.

While at it, consolidate 01_leds by using the model part of
the board name as variable.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Tomasz Maciej Nowak <tomek_n@o2.pl>

1 files changed, 0 insertions, 156 deletions

diff --git a/target/linux/mvebu/base-files/lib/upgrade/uDPU.sh b/target/linux/mvebu/base-files/lib/upgrade/uDPU.sh
deleted file mode 100644
index 032c706605..0000000000
--- a/target/linux/mvebu/base-files/lib/upgrade/uDPU.sh
+++ /dev/null
@@ -1,156 +0,0 @@
-udpu_check_emmc() {
-# uDPU uses combined ext4 and f2fs partitions.
-# partition layout:
-#	1. boot	(ext4)
-#	2. recovery  (ext4)
-#	3. rootfs (f2fs)
-#	4. misc (f2fs)
-
-	# Check which device is available, depending on the board revision
-	if [ -b "/dev/mmcblk1" ]; then
-		emmc_dev=/dev/mmcblk1
-	elif [ -b "/dev/mmcblk0" ]; then
-		emmc_dev=/dev/mmcblk0
-	else
-		echo "Cannot detect eMMC flash, aborting.."
-		exit 1
-	fi
-}
-
-udpu_part_prep() {
-	 if [ "$(grep $1 /proc/mounts)" ]; then
-		mounted_part="$(grep $1 /proc/mounts | awk '{print $2}' | head -1)"
-		umount $mounted_part
-		[ "$(grep -wo $mounted_part /proc/mounts)" ] && umount -l $mounted_part
-	fi
-}
-
-udpu_do_part_check() {
-	local emmc_parts="1 2 3 4"
-	local part_valid="1"
-
-	# Check if the block devices exist
-	for num in ${emmc_parts}; do
-		[[ ! -b ${emmc_dev}p${num} ]] && part_valid="0"
-	done
-
-	# If partitions are missing create a new partition table
-	if [ "$part_valid" != "1" ]; then
-		printf "Invalid partition table, creating a new one\n"
-		printf "o\nn\np\n1\n\n+256M\nn\np\n2\n\n+256M\nn\np\n3\n\n+1536M\nn\np\n\n\nw\n" | fdisk -W always $emmc_dev  > /dev/null 2>&1
-
-		# Format the /misc part right away as we will need it for the firmware
-		printf "Formating /misc partition, this make take a while..\n"
-		udpu_part_prep ${emmc_dev}p4
-		mkfs.f2fs -q -l misc ${emmc_dev}p4
-		[ $? -eq 0 ] && printf "/misc partition formated successfully\n" || printf "/misc partition formatting failed\n"
-
-		udpu_do_initial_setup
-	else
-		printf "Partition table looks ok\n"
-	fi
-}
-
-udpu_do_misc_prep() {
-	if [ ! "$(grep -wo /misc /proc/mounts)" ]; then
-		mkdir -p /misc
-		mount ${emmc_dev}p4 /misc
-
-		# If the mount fails, try to reformat partition
-		# Leaving possiblity for multiple iterations
-		if [ $? -ne 0 ]; then
-			printf "Error while mounting /misc, trying to reformat..\n"
-
-			format_count=0
-			while [ "$format_count" -lt "1" ]; do
-				udpu_part_prep ${emmc_dev}p4
-				mkfs.f2fs -q -l misc ${emmc_dev}p4
-				mount ${emmc_dev}p4 /misc
-				if [ $? -ne 0 ]; then
-					umount -l /misc
-					printf "Failed while mounting /misc\n"
-					format_count=$((format_count +1))
-				else
-					printf "Mounted /misc successfully\n"
-					break
-				fi
-			done
-		fi
-	fi
-}
-
-udpu_do_initial_setup() {
-	# Prepare /recovery parition
-	udpu_part_prep ${emmc_dev}p2
-	mkfs.ext4 -q ${emmc_dev}p2 | echo y &> /dev/null
-
-	# Prepare /boot partition
-	udpu_part_prep ${emmc_dev}p1
-	mkfs.ext4 -q ${emmc_dev}p1 | echo y &> /dev/null
-
-	# Prepare /root partition
-	printf "Formating /root partition, this may take a while..\n"
-	udpu_part_prep ${emmc_dev}p3
-	mkfs.f2fs -q -l rootfs ${emmc_dev}p3
-	[ $? -eq 0 ] && printf "/root partition reformated\n"
-}
-
-udpu_do_regular_upgrade() {
-	# Clean /boot partition - mfks.ext4 is not available in chroot
-	[ "$(grep -wo /boot /proc/mounts)" ] && umount /boot
-	mkdir -p /tmp/boot
-	mount ${emmc_dev}p1 /tmp/boot
-	rm -rf /tmp/boot/*
-
-	# Clean /root partition - mkfs.f2fs is not available in chroot
-	[ "$(grep -wo /dev/root /proc/mounts)" ] && umount /
-	mkdir -p /tmp/rootpart
-	mount ${emmc_dev}p3 /tmp/rootpart
-	rm -rf /tmp/rootpart/*
-}
-
-platform_do_upgrade_uDPU() {
-	udpu_check_emmc
-
-	# Prepare and extract firmware on /misc partition
-	udpu_do_misc_prep
-
-	[ -f "/misc/firmware" ] && rm -r /misc/firmware
-	mkdir -p /misc/firmware
-	tar xzf "$1" -C /misc/firmware/
-
-	udpu_do_regular_upgrade
-
-	printf "Updating /boot partition\n"
-	tar xzf /misc/firmware/boot.tgz -C /tmp/boot
-	[ $? -eq 0 ] && printf "/boot partition updated successfully\n" || printf "/boot partition update failed\n"
-	sync
-
-	printf "Updating /root partition\n"
-	tar xzf /misc/firmware/rootfs.tgz -C /tmp/rootpart
-	[ $? -eq 0 ] && printf "/root partition updated successfully\n" || printf "/root partition update failed\n"
-	sync
-
-	# Saving configuration files over sysupgrade
-	platform_copy_config_uDPU
-
-	# Remove tmp mounts
-	tmp_parts=$(grep "${emmc_dev}" /proc/mounts | awk '{print $2}')
-	for part in ${tmp_parts}; do
-		umount $part
-		# Force umount is necessary
-		[ "$(grep "${part}" /proc/mounts)" ] && umount -l $part
-	done
-
-	# Sysupgrade complains about /tmp and /dev, so we can detach them here
-	umount -l /tmp
-	umount -l /dev
-}
-
-platform_copy_config_uDPU() {
-	# Config is saved on the /misc partition and copied on the rootfs after the reboot
-	if [ -f "$UPGRADE_BACKUP" ]; then
-		cp -f "$UPGRADE_BACKUP" "/misc/$BACKUP_FILE"
-		sync
-	fi
-}