mvebu: split base-files across subtargets

For the mvebu target in particular, there is a lot of files in
base-files that are only relevant for one subtarget. Improve
overview and reduce size per subtarget by moving/splitting
base-files depending on the subtarget they belong to.

While at it, consolidate 01_leds by using the model part of
the board name as variable.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Tomasz Maciej Nowak <tomek_n@o2.pl>

3 files changed, 0 insertions, 131 deletions

diff --git a/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac b/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
deleted file mode 100644
index fd41836c8d..0000000000
--- a/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
+++ /dev/null
@@ -1,46 +0,0 @@
-#
-# Copyright (C) 2014-2015 OpenWrt.org
-# Copyright (C) 2016 LEDE-Project.org
-#
-
-preinit_set_mac_address() {
-	local mac
-
-	. /lib/functions.sh
-
-	case $(board_name) in
-	linksys,caiman|linksys,cobra|linksys,rango|linksys,shelby|linksys,venom)
-		# rename interfaces back to the way they were with 4.4
-		case "$(readlink /sys/class/net/eth0)" in
-			*f1070000*)
-				ip link set eth0 name tmp0
-				ip link set eth1 name eth0
-				ip link set tmp0 name eth1
-			;;
-		esac
-
-		mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
-		mac_wan=$(macaddr_setbit_la "$mac")
-		ip link set dev eth0 address $mac 2>/dev/null
-		ip link set dev eth1 address $mac_wan 2>/dev/null
-		;;
-	linksys,mamba)
-		mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
-		ip link set dev eth0 address $mac 2>/dev/null
-		ip link set dev eth1 address $mac 2>/dev/null
-		;;
-	marvell,a385-db-ap|solidrun,clearfog*a1)
-		# rename interfaces back to the way they were with 4.4
-		case "$(readlink /sys/class/net/eth0)" in
-			*f1070000*)
-				ip link set eth0 name tmp0
-				ip link set eth1 name eth0
-				ip link set eth2 name eth1
-				ip link set tmp0 name eth2
-			;;
-		esac
-		;;
-	esac
-}
-
-boot_hook_add preinit_main preinit_set_mac_address
diff --git a/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg b/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg
deleted file mode 100644
index 83448e5ace..0000000000
--- a/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg
+++ /dev/null
@@ -1,37 +0,0 @@
-#
-# Copyright (C) 2014-2016 OpenWrt.org
-# Copyright (C) 2016 LEDE-Project.org
-#
-
-preinit_mount_syscfg() {
-	. /lib/functions.sh
-	. /lib/upgrade/common.sh
-
-	case $(board_name) in
-	linksys,caiman|linksys,cobra|linksys,mamba|linksys,rango|linksys,shelby|linksys,venom)
-		needs_recovery=0
-		syscfg_part=$(grep syscfg /proc/mtd |cut -c4)
-		ubiattach -m $syscfg_part || needs_recovery=1
-		if [ $needs_recovery -eq 1 ]
-		then
-			echo "ubifs syscfg partition is damaged, reformatting"
-			ubidetach -m $syscfg_part
-			ubiformat -y -O 2048 -q /dev/mtd$syscfg_part
-			ubiattach -m $syscfg_part
-			ubimkvol /dev/ubi1 -n 0 -N syscfg -t dynamic --maxavsize
-		fi
-		mkdir /tmp/syscfg
-		mount -t ubifs ubi1:syscfg /tmp/syscfg
-		[ -f "/tmp/syscfg/$BACKUP_FILE" ] && {
-		echo "- config restore -"
-		cd /
-		mv "/tmp/syscfg/$BACKUP_FILE" /tmp
-		tar xzf "/tmp/$BACKUP_FILE"
-		rm -f "/tmp/$BACKUP_FILE"
-		sync
-		}
-		;;
-	esac
-}
-
-boot_hook_add preinit_main preinit_mount_syscfg
diff --git a/target/linux/mvebu/base-files/lib/preinit/82_uDPU b/target/linux/mvebu/base-files/lib/preinit/82_uDPU
deleted file mode 100644
index 12bbfc3725..0000000000
--- a/target/linux/mvebu/base-files/lib/preinit/82_uDPU
+++ /dev/null
@@ -1,48 +0,0 @@
-#
-# Copyright (C) 2014-2019 OpenWrt.org
-# Copyright (C) 2016 LEDE-Project.org
-#
-
-preinit_mount_udpu() {
-	. /lib/functions.sh
-	. /lib/upgrade/common.sh
-
-	case $(board_name) in
-	methode,udpu)
-		# Check which device is detected
-		[ -b "/dev/mmcblk0" ] && mmcdev="/dev/mmcblk0" || mmcdev="/dev/mmcblk1"
-
-		if [ -b "${mmcdev}p4" ]; then
-			mkdir /misc
-			mount -t f2fs ${mmcdev}p4 /misc
-			[ -f "/misc/$BACKUP_FILE" ] && {
-				echo "- Restoring configuration files -"
-				tar xzf "/misc/$BACKUP_FILE" -C /
-				rm -f "/misc/$BACKUP_FILE"
-				sync
-			}
-			[ -f "/misc/firmware/recovery.itb" ] && {
-					echo "- Updating /recovery partition -"
-					mkfs.ext4 -q ${mmcdev}p2 | echo y &> /dev/null
-					mkdir -p /tmp/recovery
-					mount ${mmcdev}p2 /tmp/recovery
-					cp /misc/firmware/recovery.itb /tmp/recovery
-					[ -f "/misc/firmware/boot.scr" ] && \
-						cp /misc/firmware/boot.scr /tmp/recovery
-					sync
-					umount /tmp/recovery
-					rm -rf /tmp/recovery
-
-					# Replace previous backup with the new one
-					[ -d "/misc/firmware_old" ] && rm -rf /misc/firmware_old
-					[ -d "/misc/firmware" ] && mv /misc/firmware /misc/firmware_old
-				}
-		fi
-
-		# Legacy support - if rootfs was booted, instruct u-boot to keep the current root dev
-		[ "$(df | grep /dev/root)" ] && fw_setenv root_ok '2'
-	;;
-	esac
-}
-
-boot_hook_add preinit_main preinit_mount_udpu