mpc85xx: Add Aerohive HiveAP-330 Access Point

The following adds the Aerohive HiveAP-330 Access Point to LEDE under
the mpc85xx/p1020 subtarget.

Hardware:
- SoC: Freescale P1020NSE2DFB
- NAND: Intel JS28F512M29EWH 64MB
- Memory: 2x ProMOS V59C1G01168QBJ3 128MB (Total of 256MB)
- 2.4GHz WiFi: Atheros AR9390-AL1A
- 5.0GHz WiFi: Atheros AR9390-AL1A
- Eth1: Atheros AR8035-A PoE
- Eth2: Atheros AR8035-A
- TPM: Atmel AT97SC3204
- LED Driver: TI LP5521

Flashing:
1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a
password of administrator or AhNf?d@ta06 if prompted.
2. Once in U-Boot, tftp boot the initramfs image:
    dhcp;
    tftpboot 0x1000000 192.168.1.101:lede-
mpc85xx-p1020-hiveap-330-initramfs.zImage;
    tftpboot 0x6000000 192.168.1.101:lede-mpc85xx-p1020-hiveap-330.fdt;
    bootm 0x1000000 - 0x6000000;
3. Once booted, scp over the sysupgrade file and sysupgrade the device
to flash LEDE to the NAND.
    sysupgrade /tmp/lede-mpc85xx-p1020-hiveap-330-sysupgrade.img

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>

11 files changed, 458 insertions, 10 deletions

diff --git a/target/linux/mpc85xx/base-files/etc/board.d/02_network b/target/linux/mpc85xx/base-files/etc/board.d/02_network
index 511b56b1cc..1fedb7962e 100755
--- a/target/linux/mpc85xx/base-files/etc/board.d/02_network
+++ b/target/linux/mpc85xx/base-files/etc/board.d/02_network
@@ -10,6 +10,9 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
+hiveap-330)
+	ucidef_set_interfaces_lan_wan "eth1" "eth0"
+	;;
 tl-wdr4900-v1)
 	ucidef_add_switch "switch0" \
 		"0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
diff --git a/target/linux/mpc85xx/base-files/etc/diag.sh b/target/linux/mpc85xx/base-files/etc/diag.sh
index b269427a51..7261795197 100644
--- a/target/linux/mpc85xx/base-files/etc/diag.sh
+++ b/target/linux/mpc85xx/base-files/etc/diag.sh
@@ -5,11 +5,14 @@
 . /lib/functions/leds.sh
 
 get_status_led() {
-        case $(board_name) in
-        tl-wdr4900-v1)
-                status_led="tp-link:blue:system"
-                ;;
-        esac
+	case $(board_name) in
+	hiveap-330)
+		status_led="hiveap-330:green:tricolor0"
+		;;
+	tl-wdr4900-v1)
+		status_led="tp-link:blue:system"
+		;;
+esac
 }
 
 set_state() {
diff --git a/target/linux/mpc85xx/base-files/lib/mpc85xx.sh b/target/linux/mpc85xx/base-files/lib/mpc85xx.sh
index 1a2a671e28..065589f18f 100755
--- a/target/linux/mpc85xx/base-files/lib/mpc85xx.sh
+++ b/target/linux/mpc85xx/base-files/lib/mpc85xx.sh
@@ -13,6 +13,9 @@ mpc85xx_board_detect() {
 	model=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /model/ {print $2}' /proc/cpuinfo)
 
 	case "$model" in
+	*"HiveAP-330")
+		name="hiveap-330"
+		;;
 	*"TL-WDR4900 v1")
 		name="tl-wdr4900-v1"
 		;;
diff --git a/target/linux/mpc85xx/base-files/lib/preinit/05_set_iface_mac_mcp85xx b/target/linux/mpc85xx/base-files/lib/preinit/05_set_iface_mac_mcp85xx
new file mode 100644
index 0000000000..cecaee86b0
--- /dev/null
+++ b/target/linux/mpc85xx/base-files/lib/preinit/05_set_iface_mac_mcp85xx
@@ -0,0 +1,17 @@
+#!/bin/sh
+
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+preinit_set_mac_address() {
+	case $(board_name) in
+		hiveap-330)
+			mac_wan=$(mtd_get_mac_binary hw-info 0)
+			[ -n "$mac_wan" ] && ifconfig eth0 hw ether "$mac_wan"
+			mac_lan=$(macaddr_add $(mtd_get_mac_binary hw-info 0) +1)
+			[ -n "$mac_lan" ] && ifconfig eth1 hw ether "$mac_lan"
+			;;
+	esac
+}
+
+boot_hook_add preinit_main preinit_set_mac_address
diff --git a/target/linux/mpc85xx/base-files/lib/upgrade/platform.sh b/target/linux/mpc85xx/base-files/lib/upgrade/platform.sh
index 65b3674769..9e3a3d661a 100755
--- a/target/linux/mpc85xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mpc85xx/base-files/lib/upgrade/platform.sh
@@ -4,6 +4,10 @@
 
 PART_NAME=firmware
 
+get_magic_long_at() {
+	(get_image "$1" | dd bs=4 count=1 skip="$2" | hexdump -v -n 4 -e '1/1 "%02x"') 2>/dev/null
+}
+
 tplink_get_hwid() {
 	local part
 
@@ -28,6 +32,29 @@ platform_check_image() {
 	[ "$#" -gt 1 ] && return 1
 
 	case $board in
+	hiveap-330)
+		local init_magic=$(get_magic_long_at "$1" "65536")
+		local root_magic=$(get_magic_long_at "$1" "131072")
+		local kernel_magic=$(get_magic_long_at "$1" "10551296")
+
+		[ "$magic" != "d00dfeed" ] && {
+			echo "Invalid dtb image type."
+			return 1
+		}
+		[ "$init_magic" != "27051956" ] && {
+			echo "Invalid initramfs image type."
+			return 1
+		}
+		[ "$root_magic" != "68737173" ] && {
+			echo "Invalid rootfs image type."
+			return 1
+		}
+		[ "$kernel_magic" != "27051956" ] && {
+			echo "Invalid kernel image type."
+			return 1
+		}
+		return 0
+		;;
 	tl-wdr4900-v1)
 		[ "$magic" != "01000000" ] && {
 			echo "Invalid image type."
diff --git a/target/linux/mpc85xx/config-4.9 b/target/linux/mpc85xx/config-4.9
index 9086ba9177..46950e70c8 100644
--- a/target/linux/mpc85xx/config-4.9
+++ b/target/linux/mpc85xx/config-4.9
@@ -25,6 +25,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_ARCH_USE_BUILTIN_BSWAP=y
 CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
 CONFIG_ASN1=y
+CONFIG_AT803X_PHY=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_BLK_MQ_PCI=y
 CONFIG_BOOKE=y
@@ -81,6 +82,7 @@ CONFIG_E500=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_EDAC_ATOMIC_SCRUB=y
 CONFIG_EDAC_SUPPORT=y
+CONFIG_EEPROM_LEGACY=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_EPAPR_BOOT is not set
 CONFIG_ETHERNET_PACKET_MANGLE=y
@@ -161,6 +163,7 @@ CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
+CONFIG_HIVEAP_330=y
 CONFIG_HW_RANDOM=y
 CONFIG_HZ=250
 # CONFIG_HZ_100 is not set
@@ -168,6 +171,7 @@ CONFIG_HZ_250=y
 CONFIG_HZ_PERIODIC=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MPC=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_IOMMU_HELPER=y
@@ -180,17 +184,16 @@ CONFIG_ISA_DMA_API=y
 CONFIG_KERNEL_GZIP=y
 CONFIG_KERNEL_START=0xc0000000
 # CONFIG_KSI8560 is not set
+CONFIG_LEDS_LP5521=y
+CONFIG_LEDS_LP55XX_COMMON=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_LIBFDT=y
 CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_LOWMEM_SIZE=0x30000000
 CONFIG_LXT_PHY=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
 # CONFIG_MATH_EMULATION is not set
 CONFIG_MDIO_BOARDINFO=y
-# CONFIG_MFD_MAX77620 is not set
 CONFIG_MIGRATION=y
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_MODULES_USE_ELF_RELA=y
@@ -207,8 +210,8 @@ CONFIG_MPIC_TIMER=y
 # CONFIG_MPIC_U3_HT_IRQS is not set
 # CONFIG_MPIC_WEIRD is not set
 CONFIG_MPILIB=y
-# CONFIG_MTD_CFI is not set
 CONFIG_MTD_M25P80=y
+CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_SPI_NOR=y
 # CONFIG_MVME2500 is not set
 # CONFIG_NEED_DMA_MAP_STATE is not set
diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts
new file mode 100644
index 0000000000..7900c40c7e
--- /dev/null
+++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts
@@ -0,0 +1,227 @@
+/*
+ * Aerohive HiveAP-330 Device Tree Source
+ *
+ * Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+	model = "Aerohive HiveAP-330";
+	compatible = "aerohive,hiveap-330";
+
+	chosen {
+		bootargs = "console=ttyS0,9600";
+		bootargs-override = "console=ttyS0,9600 noinitrd";
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_lbc: lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+		ranges = <0x0 0x0 0x0 0xec000000 0x4000000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x4000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				reg = <0x0 0x40000>;
+				label = "dtb";
+			};
+
+			partition@40000 {
+				reg = <0x40000 0x40000>;
+				label = "initramfs";
+			};
+
+			partition@80000 {
+				reg = <0x80000 0x27c0000>;
+				label = "rootfs";
+			};
+
+			partition@2840000 {
+				reg = <0x2840000 0x800000>;
+				label = "kernel";
+			};
+
+			partition@3040000 {
+				reg = <0x3040000 0xec0000>;
+				label = "stock-jffs2";
+				read-only;
+			};
+
+			partition@3f00000 {
+				reg = <0x3f00000 0x20000>;
+				label = "hw-info";
+				read-only;
+			};
+
+			partition@3f20000 {
+				reg = <0x3f20000 0x20000>;
+				label = "boot-info";
+				read-only;
+			};
+
+			partition@3f40000 {
+				reg = <0x3f40000 0x20000>;
+				label = "boot-info-backup";
+				read-only;
+			};
+
+			partition@3f60000 {
+				reg = <0x3f60000 0x20000>;
+				label = "u-boot-env";
+			};
+
+			partition@3f80000 {
+				reg = <0x3f80000 0x80000>;
+				label = "u-boot";
+				read-only;
+			};
+
+			firmware@0 {
+				reg = <0x0 0x3040000>;
+				label = "firmware";
+			};
+		};
+	};
+
+	board_soc: soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+
+		i2c@3100 {
+			tpm@29 {
+				compatible = "atmel,at97sc3204t";
+				reg = <0x29>;
+			};
+
+			lp5521@32 {
+				compatible = "national,lp5521";
+				reg = <0x32>;
+				clock-mode = /bits/ 8 <2>;
+				chan0 {
+					chan-name = "hiveap-330:red:tricolor0";
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
+				chan1 {
+					chan-name = "hiveap-330:green:tricolor0";
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
+				chan2 {
+					chan-name = "hiveap-330:blue:tricolor0";
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
+			};
+
+			/* Most likely SoC boot config */
+			eeprom@51 {
+				compatible = "eeprom";
+				reg = <0x51>;
+			};
+		};
+
+		mdio@24000 {
+			phy0: ethernet-phy@0 {
+				interrupts = <3 1 0 0>;
+				reg = <0x1>;
+			};
+
+			phy1: ethernet-phy@1 {
+				interrupts = <2 1 0 0>;
+				reg = <0x2>;
+			};
+		};
+
+		mdio@25000 {
+			status = "disabled";
+		};
+
+		mdio@26000 {
+			status = "disabled";
+		};
+
+		enet0: ethernet@b0000 {
+			status = "okay";
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+
+		};
+
+		enet1: ethernet@b1000 {
+			status = "disabled";
+		};
+
+		enet2: ethernet@b2000 {
+			status = "okay";
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		gpio0: gpio-controller@fc00 {
+		};
+
+		usb@22000 {
+			phy_type = "ulpi";
+			dr_mode = "host";
+		};
+
+		usb@23000 {
+			status = "disabled";
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		reg = <0x0 0xffe09000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x20000000
+			0x1000000 0x0 0x00000000 0x0 0xffc30000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0x0 0xffe0a000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000
+		      0x1000000 0x0 0x00000000 0x0 0xffc20000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+			      0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	buttons {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "Reset button";
+			gpios = <&gpio0 8 1>; /* active low */
+			linux,code = <0x198>; /* KEY_RESTART */
+		};
+	};
+};
+/include/ "fsl/p1020si-post.dtsi"
diff --git a/target/linux/mpc85xx/files/arch/powerpc/platforms/85xx/hiveap-330.c b/target/linux/mpc85xx/files/arch/powerpc/platforms/85xx/hiveap-330.c
new file mode 100644
index 0000000000..f325b32ce6
--- /dev/null
+++ b/target/linux/mpc85xx/files/arch/powerpc/platforms/85xx/hiveap-330.c
@@ -0,0 +1,89 @@
+/*
+ * Aerohive HiveAP-330 Board Setup
+ *
+ * Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com>
+ *
+ * Based on:
+ *   mpc85xx_rdb.c:
+ *      MPC85xx RDB Board Setup
+ *      Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/of_platform.h>
+
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
+
+void __init hiveap_330_pic_init(void)
+{
+	struct mpic *mpic;
+
+	mpic = mpic_alloc(NULL, 0,
+	  MPIC_BIG_ENDIAN |
+	  MPIC_SINGLE_DEST_CPU,
+	  0, 256, " OpenPIC  ");
+
+	BUG_ON(mpic == NULL);
+	mpic_init(mpic);
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init hiveap_330_setup_arch(void)
+{
+	if (ppc_md.progress)
+		ppc_md.progress("hiveap_330_setup_arch()", 0);
+
+	mpc85xx_smp_init();
+
+	fsl_pci_assign_primary();
+
+	printk(KERN_INFO "HiveAP-330 board from Aerohive\n");
+}
+
+machine_arch_initcall(hiveap_330, mpc85xx_common_publish_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init hiveap_330_probe(void)
+{
+	if (of_machine_is_compatible("aerohive,hiveap-330"))
+		return 1;
+	return 0;
+}
+
+define_machine(hiveap_330) {
+	.name			= "P1020 RDB",
+	.probe			= hiveap_330_probe,
+	.setup_arch		= hiveap_330_setup_arch,
+	.init_IRQ		= hiveap_330_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
+#endif
+	.get_irq		= mpic_get_irq,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
diff --git a/target/linux/mpc85xx/image/Makefile b/target/linux/mpc85xx/image/Makefile
index 25a9b070c5..4738dcf122 100644
--- a/target/linux/mpc85xx/image/Makefile
+++ b/target/linux/mpc85xx/image/Makefile
@@ -21,7 +21,18 @@ endef
 
 zImage:=$(BIN_DIR)/$(IMG_PREFIX)-zImage
 
-DTS_TARGETS = fsl/p1010rdb-pa tl-wdr4900-v1 fsl/p1020rdb
+DTS_TARGETS = hiveap-330 fsl/p1010rdb-pa tl-wdr4900-v1 fsl/p1020rdb
+
+define Build/empty-initramfs
+	-mkdir $(KDIR_TMP)/empty-initramfs; \
+		cd $(KDIR_TMP)/empty-initramfs; \
+		find . | cpio -o -H newc | gzip -9n > $(KDIR_TMP)/empty-initramfs.gpio.gz
+
+	-$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) -O linux -T ramdisk \
+		-C gzip -n "empty initramfs" \
+		-d $(KDIR_TMP)/empty-initramfs.gpio.gz \
+		$(KDIR_TMP)/$(IMG_PREFIX)-empty-initramfs.image
+endef
 
 define Image/BuildKernel
 	cp $(KDIR)/zImage $(BIN_DIR)/$(IMG_PREFIX)-zImage
@@ -35,6 +46,21 @@ define Image/BuildKernel/Initramfs
 ifeq ($(SUBTARGET),generic)
 	cp $(KDIR)/cuImage.tl-wdr4900-v1-initramfs $(BIN_DIR)/$(IMG_PREFIX)-tl-wdr4900-v1-initramfs.uImage
 endif
+ifeq ($(SUBTARGET),p1020)
+	cp $(KDIR)/zImage-initramfs $(BIN_DIR)/$(IMG_PREFIX)-hiveap-330-initramfs.zImage
+endif
+endef
+
+define Image/Build/Aerohive
+	$(call Build/empty-initramfs)
+ifeq ($(2),hiveap-330)
+	( \
+		dd if=$(BIN_DIR)/$(IMG_PREFIX)-$(2).fdt bs=256k conv=sync; \
+		dd if=$(KDIR_TMP)/$(IMG_PREFIX)-empty-initramfs.image bs=256k conv=sync; \
+		dd if=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=40704k conv=sync; \
+		dd if=$(KDIR)/zImage conv=sync; \
+	) > $(BIN_DIR)/$(IMG_PREFIX)-$(2)-sysupgrade.img
+endif
 endef
 
 define Image/Build/TPLINK
@@ -50,6 +76,10 @@ define Image/Build/TPLINK
 		-o $(call sysupname,$(1),$(2))
 endef
 
+define Image/Build/Profile/hiveap-330
+	$(call Image/Build/Aerohive,$(1),hiveap-330)
+endef
+
 define Image/Build/Profile/TLWDR4900
 	$(call Image/Build/TPLINK,$(1),tl-wdr4900-v1,cuImage.tl-wdr4900-v1,0x49000001,1,16Mppc)
 endef
diff --git a/target/linux/mpc85xx/p1020/profiles/aerohive.mk b/target/linux/mpc85xx/p1020/profiles/aerohive.mk
new file mode 100644
index 0000000000..0f5ace6c39
--- /dev/null
+++ b/target/linux/mpc85xx/p1020/profiles/aerohive.mk
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com>
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/hiveap-330
+	NAME:=Aerohive HiveAP-330
+	PACKAGES:=kmod-usb-storage kmod-ath9k wpad-mini kmod-tpm-i2c-atmel
+endef
+
+define Profile/hiveap-330/Description
+	Package set optimized for the Aerohive HiveAP-330.
+endef
+$(eval $(call Profile,hiveap-330))
diff --git a/target/linux/mpc85xx/patches-4.9/101-powerpc-85xx-hiveap-330-support.patch b/target/linux/mpc85xx/patches-4.9/101-powerpc-85xx-hiveap-330-support.patch
new file mode 100644
index 0000000000..ece8c7d80e
--- /dev/null
+++ b/target/linux/mpc85xx/patches-4.9/101-powerpc-85xx-hiveap-330-support.patch
@@ -0,0 +1,30 @@
+--- a/arch/powerpc/platforms/85xx/Kconfig
++++ b/arch/powerpc/platforms/85xx/Kconfig
+@@ -48,6 +48,17 @@ config BSC9132_QDS
+ 	  and dual StarCore SC3850 DSP cores.
+ 	  Manufacturer : Freescale Semiconductor, Inc
+ 
++config HIVEAP_330
++	bool "Aerohive HiveAP-330"
++	select DEFAULT_UIMAGE
++	select ARCH_REQUIRE_GPIOLIB
++	select GPIO_MPC8XXX
++	help
++	  This option enables support for the Aerohive HiveAP-330 board.
++
++	  This board is a Concurrent Dual-Band wireless access point with a
++	  Freescale P1020 SoC.
++
+ config MPC8540_ADS
+ 	bool "Freescale MPC8540 ADS"
+ 	select DEFAULT_UIMAGE
+--- a/arch/powerpc/platforms/85xx/Makefile
++++ b/arch/powerpc/platforms/85xx/Makefile
+@@ -9,6 +9,7 @@ obj-y += common.o
+ obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
+ obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o
+ obj-$(CONFIG_C293_PCIE)   += c293pcie.o
++obj-$(CONFIG_HIVEAP_330) += hiveap-330.o
+ obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
+ obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
+ obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o