aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mpc85xx
diff options
context:
space:
mode:
authorPawel Dembicki <paweldembicki@gmail.com>2018-12-30 07:38:45 +0000
committerChristian Lamparter <chunkeey@gmail.com>2019-01-13 11:31:43 +0100
commit5de6aed42c3519f819b913a8b218adb5ea827872 (patch)
tree5c7a3260d8e27e8c1038a577438d7b3005255ac0 /target/linux/mpc85xx
parented2839ac41908905294f82de36b68757e78545e6 (diff)
downloadupstream-5de6aed42c3519f819b913a8b218adb5ea827872.tar.gz
upstream-5de6aed42c3519f819b913a8b218adb5ea827872.tar.bz2
upstream-5de6aed42c3519f819b913a8b218adb5ea827872.zip
mpc85xx: add support for Freescale (NXP) P2020RDB
This commit add initial support for Freescale (NXP) P2020RDB Hardware: SoC: P2020 2x1GHz DRAM: 512-1GB DDR3 2 + 4 GBE (2 separate ports and four in VSC7385) Flash: 16MB NOR, 32MB NAND, 16MB SPI-NOR PCIE x1 and mPCIE x1 SD Reader Interfaces: GBE RJ45 x6 USB2.0 x1 UART x2 I2C x2 JTAG x1 SD x1 PCIE x2 (PCIE and mPCIE) Flash instructions: Place sysupgrade image to 0x80000 address in NOR. Eg. (no brakelines in setenv command): setenv 'firmware_flash tftpboot $loadaddr $firmwarefile; protect off $norfdtaddr +$filesize; erase $norfdtaddr +$filesize; cp.b $loadaddr $norfdtaddr $filesize; protect on $norfdtaddr +$filesize; cmp.b $loadaddr $norfdtaddr $filesize' setenv firmwarefile firmware.bin run firmware_flash Boot (no brakeline in setenv command): setenv bootcmd 'setenv bootargs root=/dev/mtdblock3 rw console=$consoledev, $baudrate rootfstype=squashfs $othbootargs; bootm $norfdtaddr' saveenv boot Known issues: -Switch is unmanaged (VSC 7385 is connected via eLBC, driver uses SPI) -No SD reader support Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [refreshed patches]
Diffstat (limited to 'target/linux/mpc85xx')
-rw-r--r--target/linux/mpc85xx/Makefile2
-rw-r--r--target/linux/mpc85xx/image/Makefile19
-rw-r--r--target/linux/mpc85xx/p2020/config-default31
-rw-r--r--target/linux/mpc85xx/p2020/profiles/00-default.mk15
-rw-r--r--target/linux/mpc85xx/p2020/target.mk5
-rw-r--r--target/linux/mpc85xx/patches-4.14/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch170
-rw-r--r--target/linux/mpc85xx/patches-4.19/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch170
7 files changed, 411 insertions, 1 deletions
diff --git a/target/linux/mpc85xx/Makefile b/target/linux/mpc85xx/Makefile
index 552f16e82f..799f0f54dd 100644
--- a/target/linux/mpc85xx/Makefile
+++ b/target/linux/mpc85xx/Makefile
@@ -12,7 +12,7 @@ BOARDNAME:=Freescale MPC85xx
CPU_TYPE:=8540
FEATURES:=squashfs
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
-SUBTARGETS:=generic p1020
+SUBTARGETS:=generic p1020 p2020
KERNEL_PATCHVER:=4.14
diff --git a/target/linux/mpc85xx/image/Makefile b/target/linux/mpc85xx/image/Makefile
index 00eed88874..dd15d4c610 100644
--- a/target/linux/mpc85xx/image/Makefile
+++ b/target/linux/mpc85xx/image/Makefile
@@ -79,4 +79,23 @@ TARGET_DEVICES += hiveap-330
endif
+ifeq ($(SUBTARGET),p2020)
+
+define Device/p2020rdb
+ DEVICE_TITLE := Freescale P2020RDB
+ DEVICE_DTS_DIR := $(DTS_DIR)/fsl
+ DEVICE_PACKAGES := kmod-hwmon-core kmod-hwmon-lm90 kmod-rtc-ds1307 \
+ kmod-gpio-pca953x kmod-eeprom-at24
+ BLOCKSIZE := 128k
+ KERNEL := kernel-bin | gzip | \
+ fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+ SUPPORTED_DEVICES := fsl,P2020RDB
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
+ pad-rootfs $$(BLOCKSIZE) | append-metadata
+endef
+TARGET_DEVICES += p2020rdb
+
+endif
+
$(eval $(call BuildImage))
diff --git a/target/linux/mpc85xx/p2020/config-default b/target/linux/mpc85xx/p2020/config-default
new file mode 100644
index 0000000000..e6526446b4
--- /dev/null
+++ b/target/linux/mpc85xx/p2020/config-default
@@ -0,0 +1,31 @@
+CONFIG_ARCH_HAS_TICK_BROADCAST=y
+CONFIG_CPU_RMAP=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_IRQ_MIGRATION=y
+CONFIG_GENERIC_TBSYNC=y
+CONFIG_HAVE_RCU_TABLE_FREE=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_MPC85xx_RDB=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_BCH=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_NAND_FSL_ELBC=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_SPLIT_FIT_FW=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NR_CPUS=2
+CONFIG_PADATA=y
+CONFIG_PCI_MSI=y
+CONFIG_PPC_MSI_BITMAP=y
+CONFIG_RCU_NEED_SEGCBLIST=y
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_SMP=y
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
+CONFIG_XPS=y
diff --git a/target/linux/mpc85xx/p2020/profiles/00-default.mk b/target/linux/mpc85xx/p2020/profiles/00-default.mk
new file mode 100644
index 0000000000..c9ea67df08
--- /dev/null
+++ b/target/linux/mpc85xx/p2020/profiles/00-default.mk
@@ -0,0 +1,15 @@
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Default
+ NAME:=Default Profile
+ PRIORITY:=1
+endef
+
+define Profile/Default/Description
+ Default package set compatible with most P2020 boards.
+endef
+
+$(eval $(call Profile,Default))
diff --git a/target/linux/mpc85xx/p2020/target.mk b/target/linux/mpc85xx/p2020/target.mk
new file mode 100644
index 0000000000..23aca656b2
--- /dev/null
+++ b/target/linux/mpc85xx/p2020/target.mk
@@ -0,0 +1,5 @@
+BOARDNAME:=P2020
+
+define Target/Description
+ Build firmware images for Freescale P2020 based boards.
+endef
diff --git a/target/linux/mpc85xx/patches-4.14/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch b/target/linux/mpc85xx/patches-4.14/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch
new file mode 100644
index 0000000000..39c72314b8
--- /dev/null
+++ b/target/linux/mpc85xx/patches-4.14/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch
@@ -0,0 +1,170 @@
+From 93514afd769c305182beeed1f9c4c46235879ef8 Mon Sep 17 00:00:00 2001
+From: Pawel Dembicki <paweldembicki@gmail.com>
+Date: Sun, 30 Dec 2018 23:24:41 +0100
+Subject: [PATCH] powerpc: mpc85xx: change P2020RDB dts file for OpenWRT
+
+This patch apply chages for OpenWRT in P2020RDB
+dts file.
+
+Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
+---
+ arch/powerpc/boot/dts/fsl/p2020rdb.dts | 98 +++++++++++++++++---------
+ 1 file changed, 63 insertions(+), 35 deletions(-)
+
+--- a/arch/powerpc/boot/dts/fsl/p2020rdb.dts
++++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts
+@@ -2,6 +2,7 @@
+ * P2020 RDB Device Tree Source
+ *
+ * Copyright 2009-2012 Freescale Semiconductor Inc.
++ * Copyright 2018 Pawel Dembicki <paweldembicki@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+@@ -9,10 +10,15 @@
+ * option) any later version.
+ */
+
++/dts-v1/;
++
+ /include/ "p2020si-pre.dtsi"
+
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++
+ / {
+- model = "fsl,P2020RDB";
++ model = "Freescale P2020RDB";
+ compatible = "fsl,P2020RDB";
+
+ aliases {
+@@ -38,48 +44,38 @@
+ 0x2 0x0 0x0 0xffb00000 0x00020000>;
+
+ nor@0,0 {
+- #address-cells = <1>;
+- #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+- partition@0 {
+- /* This location must not be altered */
+- /* 256KB for Vitesse 7385 Switch firmware */
+- reg = <0x0 0x00040000>;
+- label = "NOR (RO) Vitesse-7385 Firmware";
+- read-only;
+- };
+-
+- partition@40000 {
+- /* 256KB for DTB Image */
+- reg = <0x00040000 0x00040000>;
+- label = "NOR (RO) DTB Image";
+- read-only;
+- };
++ partitions {
++ compatible = "fixed-partitions";
++ #address-cells = <1>;
++ #size-cells = <1>;
+
+- partition@80000 {
+- /* 3.5 MB for Linux Kernel Image */
+- reg = <0x00080000 0x00380000>;
+- label = "NOR (RO) Linux Kernel Image";
+- read-only;
+- };
++ partition@0 {
++ /* This location must not be altered */
++ /* 256KB for Vitesse 7385 Switch firmware */
++ reg = <0x0 0x00040000>;
++ label = "NOR (RO) Vitesse-7385 Firmware";
++ read-only;
++ };
+
+- partition@400000 {
+- /* 11MB for JFFS2 based Root file System */
+- reg = <0x00400000 0x00b00000>;
+- label = "NOR (RW) JFFS2 Root File System";
+- };
++ partition@40000 {
++ compatible = "denx,fit";
++ reg = <0x00040000 0x00ec0000>;
++ label = "firmware";
++ };
+
+- partition@f00000 {
+- /* This location must not be altered */
+- /* 512KB for u-boot Bootloader Image */
+- /* 512KB for u-boot Environment Variables */
+- reg = <0x00f00000 0x00100000>;
+- label = "NOR (RO) U-Boot Image";
+- read-only;
++ partition@f00000 {
++ /* This location must not be altered */
++ /* 512KB for u-boot Bootloader Image */
++ /* 512KB for u-boot Environment Variables */
++ reg = <0x00f00000 0x00100000>;
++ label = "u-boot";
++ read-only;
++ };
+ };
+ };
+
+@@ -144,13 +140,43 @@
+ soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+
++ gpio0: gpio-controller@fc00 {
++ };
++
+ i2c@3000 {
++ temperature-sensor@4c {
++ compatible = "adi,adt7461";
++ reg = <0x4c>;
++ };
++
++ eeprom@50 {
++ compatible = "atmel,24c256";
++ reg = <0x50>;
++ };
++
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
++ i2c@3100 {
++ pmic@11 {
++ compatible = "zl2006";
++ reg = <0x11>;
++ };
++
++ gpio@18 {
++ compatible = "nxp,pca9557";
++ reg = <0x18>;
++ };
++
++ eeprom@52 {
++ compatible = "atmel,24c01";
++ reg = <0x52>;
++ };
++ };
++
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+@@ -204,10 +230,12 @@
+ phy0: ethernet-phy@0 {
+ interrupts = <3 1 0 0>;
+ reg = <0x0>;
++ reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <3 1 0 0>;
+ reg = <0x1>;
++ reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ };
+ tbi-phy@2 {
+ device_type = "tbi-phy";
diff --git a/target/linux/mpc85xx/patches-4.19/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch b/target/linux/mpc85xx/patches-4.19/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch
new file mode 100644
index 0000000000..39c72314b8
--- /dev/null
+++ b/target/linux/mpc85xx/patches-4.19/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch
@@ -0,0 +1,170 @@
+From 93514afd769c305182beeed1f9c4c46235879ef8 Mon Sep 17 00:00:00 2001
+From: Pawel Dembicki <paweldembicki@gmail.com>
+Date: Sun, 30 Dec 2018 23:24:41 +0100
+Subject: [PATCH] powerpc: mpc85xx: change P2020RDB dts file for OpenWRT
+
+This patch apply chages for OpenWRT in P2020RDB
+dts file.
+
+Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
+---
+ arch/powerpc/boot/dts/fsl/p2020rdb.dts | 98 +++++++++++++++++---------
+ 1 file changed, 63 insertions(+), 35 deletions(-)
+
+--- a/arch/powerpc/boot/dts/fsl/p2020rdb.dts
++++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts
+@@ -2,6 +2,7 @@
+ * P2020 RDB Device Tree Source
+ *
+ * Copyright 2009-2012 Freescale Semiconductor Inc.
++ * Copyright 2018 Pawel Dembicki <paweldembicki@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+@@ -9,10 +10,15 @@
+ * option) any later version.
+ */
+
++/dts-v1/;
++
+ /include/ "p2020si-pre.dtsi"
+
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++
+ / {
+- model = "fsl,P2020RDB";
++ model = "Freescale P2020RDB";
+ compatible = "fsl,P2020RDB";
+
+ aliases {
+@@ -38,48 +44,38 @@
+ 0x2 0x0 0x0 0xffb00000 0x00020000>;
+
+ nor@0,0 {
+- #address-cells = <1>;
+- #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+- partition@0 {
+- /* This location must not be altered */
+- /* 256KB for Vitesse 7385 Switch firmware */
+- reg = <0x0 0x00040000>;
+- label = "NOR (RO) Vitesse-7385 Firmware";
+- read-only;
+- };
+-
+- partition@40000 {
+- /* 256KB for DTB Image */
+- reg = <0x00040000 0x00040000>;
+- label = "NOR (RO) DTB Image";
+- read-only;
+- };
++ partitions {
++ compatible = "fixed-partitions";
++ #address-cells = <1>;
++ #size-cells = <1>;
+
+- partition@80000 {
+- /* 3.5 MB for Linux Kernel Image */
+- reg = <0x00080000 0x00380000>;
+- label = "NOR (RO) Linux Kernel Image";
+- read-only;
+- };
++ partition@0 {
++ /* This location must not be altered */
++ /* 256KB for Vitesse 7385 Switch firmware */
++ reg = <0x0 0x00040000>;
++ label = "NOR (RO) Vitesse-7385 Firmware";
++ read-only;
++ };
+
+- partition@400000 {
+- /* 11MB for JFFS2 based Root file System */
+- reg = <0x00400000 0x00b00000>;
+- label = "NOR (RW) JFFS2 Root File System";
+- };
++ partition@40000 {
++ compatible = "denx,fit";
++ reg = <0x00040000 0x00ec0000>;
++ label = "firmware";
++ };
+
+- partition@f00000 {
+- /* This location must not be altered */
+- /* 512KB for u-boot Bootloader Image */
+- /* 512KB for u-boot Environment Variables */
+- reg = <0x00f00000 0x00100000>;
+- label = "NOR (RO) U-Boot Image";
+- read-only;
++ partition@f00000 {
++ /* This location must not be altered */
++ /* 512KB for u-boot Bootloader Image */
++ /* 512KB for u-boot Environment Variables */
++ reg = <0x00f00000 0x00100000>;
++ label = "u-boot";
++ read-only;
++ };
+ };
+ };
+
+@@ -144,13 +140,43 @@
+ soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+
++ gpio0: gpio-controller@fc00 {
++ };
++
+ i2c@3000 {
++ temperature-sensor@4c {
++ compatible = "adi,adt7461";
++ reg = <0x4c>;
++ };
++
++ eeprom@50 {
++ compatible = "atmel,24c256";
++ reg = <0x50>;
++ };
++
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
++ i2c@3100 {
++ pmic@11 {
++ compatible = "zl2006";
++ reg = <0x11>;
++ };
++
++ gpio@18 {
++ compatible = "nxp,pca9557";
++ reg = <0x18>;
++ };
++
++ eeprom@52 {
++ compatible = "atmel,24c01";
++ reg = <0x52>;
++ };
++ };
++
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+@@ -204,10 +230,12 @@
+ phy0: ethernet-phy@0 {
+ interrupts = <3 1 0 0>;
+ reg = <0x0>;
++ reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <3 1 0 0>;
+ reg = <0x1>;
++ reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ };
+ tbi-phy@2 {
+ device_type = "tbi-phy";