aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mpc85xx
diff options
context:
space:
mode:
authorSven Eckelmann <sven.eckelmann@open-mesh.com>2017-11-30 14:30:06 +0100
committerMathias Kresin <dev@kresin.me>2018-01-13 08:00:14 +0100
commit86e18f6706e1f2c881fb6a2b9facf108573416e6 (patch)
tree5d9fcc9b5552c7b82efad5cedcfe4d4efdecd870 /target/linux/mpc85xx
parentc242643d1aba0f065b4a465cd78f0c54dd7cb3b2 (diff)
downloadupstream-86e18f6706e1f2c881fb6a2b9facf108573416e6.tar.gz
upstream-86e18f6706e1f2c881fb6a2b9facf108573416e6.tar.bz2
upstream-86e18f6706e1f2c881fb6a2b9facf108573416e6.zip
ipq806x: add support for OpenMesh A42
* QCA IPQ401x * 256 MB of RAM * 32 MB of SPI NOR flash (s25fl256s1) - 2x 15 MB available; but one of the 15 MB regions is the recovery image * 2T2R 2.4 GHz - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=OM-A42 * 2T2R 5 GHz - QCA4019 hw1.0 (SoC) - requires special BDF in QCA4019/hw1.0/board-2.bin with bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=OM-A42 * multi-color LED (controlled via red/green/blue GPIOs) * 1x button (reset; kmod-input-gpio-keys compatible) * external watchdog - triggered GPIO * 1x USB (xHCI) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x gigabit ethernet * powered only via POE - 802.3af POE on Ethernet 1 - 18-24v passive POE (mode B) on Ethernet 2 The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the factory image to the u-boot when the device boots up. Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Diffstat (limited to 'target/linux/mpc85xx')
0 files changed, 0 insertions, 0 deletions