diff options
| author | David Bauer <mail@david-bauer.net> | 2023-02-18 02:06:54 +0100 |
|---|---|---|
| committer | David Bauer <mail@david-bauer.net> | 2023-03-07 14:05:02 +0100 |
| commit | 35f6d795134e9b089c4e763a7f58cba7d4e15e42 (patch) | |
| tree | c83defadb19a22b45ec465288484187a050ce823 /target/linux/mpc85xx/p1010/config-default | |
| parent | 635d177ac95e0ba21fc0b4f26dcc9c7bcd516cca (diff) | |
| download | upstream-35f6d795134e9b089c4e763a7f58cba7d4e15e42.tar.gz upstream-35f6d795134e9b089c4e763a7f58cba7d4e15e42.tar.bz2 upstream-35f6d795134e9b089c4e763a7f58cba7d4e15e42.zip | |
mpc85xx: add support for Watchguard Firebox T10
Hardware
--------
SoC: Freescale P1010
RAM: 512MB
FLASH: 1 MB SPI-NOR
512 MB NAND
ETH: 3x Gigabite Ethernet (Atheros AR8033)
SERIAL: Cisco RJ-45 (115200 8N1)
RTC: Battery-Backed RTC (I2C)
Installation
------------
1. Patch U-Boot by dumping the content of the SPI-Flash using a SPI
programmer. The SHA1 hash for the U-Boot password is currently
unknown.
A tool for patching U-Boot is available at
https://github.com/blocktrron/t10-uboot-patcher/
You can also patch the unknown password yourself. The SHA1 hash is
E597301A1D89FF3F6D318DBF4DBA0A5ABC5ECBEA
2. Interrupt the bootmenu by pressing CTRL+C. A password prompt appears.
The patched password is '1234' (without quotation marks)
3. Download the OpenWrt initramfs image. Copy it to a TFTP server
reachable at 10.0.1.13/24 and rename it to uImage.
4. Connect the TFTP server to ethernet port 0 of the Watchguard T10.
5. Download and boot the initramfs image by entering "tftpboot; bootm;"
in U-Boot.
6. After OpenWrt booted, create a UBI volume on the old data partition.
The "ubi" mtd partition should be mtd7, check this using
$ cat /proc/mtd
Create a UBI partition by executing
$ ubiformat /dev/mtd7 -y
7. Increase the loadable kernel-size of U-Boot by executing
$ fw_setenv SysAKernSize 800000
8. Transfer the OpenWrt sysupgrade image to the Watchguard T10 using
scp. Install the image by using sysupgrade:
$ sysupgrade -n <path-to-sysupgrade>
Note: The LAN ports of the T10 are 1 & 2 while 0 is WAN. You might
have to change the ethernet-port.
9. OpenWrt should now boot from the internal NAND. Enjoy.
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/mpc85xx/p1010/config-default')
| -rw-r--r-- | target/linux/mpc85xx/p1010/config-default | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/target/linux/mpc85xx/p1010/config-default b/target/linux/mpc85xx/p1010/config-default index 5ca65812d7..53e077b6c2 100644 --- a/target/linux/mpc85xx/p1010/config-default +++ b/target/linux/mpc85xx/p1010/config-default @@ -1,4 +1,5 @@ CONFIG_AT803X_PHY=y +CONFIG_CMDLINE_OVERRIDE=y # CONFIG_FSL_CORENET_CF is not set CONFIG_MTD_NAND_FSL_IFC=y CONFIG_MTD_SPLIT_FIRMWARE=y @@ -19,3 +20,4 @@ CONFIG_REGMAP=y CONFIG_REGULATOR=y CONFIG_TL_WDR4900_V1=y CONFIG_UBIFS_FS=y +CONFIG_FIREBOX_T10=y
\ No newline at end of file |