diff options
| author | David Bauer <mail@david-bauer.net> | 2023-03-18 02:28:23 +0100 |
|---|---|---|
| committer | David Bauer <mail@david-bauer.net> | 2023-04-08 14:41:01 +0200 |
| commit | 765f66810a3324cc35fa6471ee8eeee335ba8c2b (patch) | |
| tree | 215305e9bb0ce4571394c6eac6260aa44fa6c0fa /target/linux/mpc85xx/p1010/config-default | |
| parent | f058dad1b62d0d6c25ffd8365a8fbf0efb7f6f84 (diff) | |
| download | upstream-765f66810a3324cc35fa6471ee8eeee335ba8c2b.tar.gz upstream-765f66810a3324cc35fa6471ee8eeee335ba8c2b.tar.bz2 upstream-765f66810a3324cc35fa6471ee8eeee335ba8c2b.zip | |
mpc85xx: add support for Enterasys WS-AP3715i
Hardware
--------
SoC: NXP P1010 (1x e500 @ 800MHz)
RAM: 256M DDR3 (2x Samsung K4B1G1646G-BCH9)
FLASH: 32M NOR (Spansion S25FL256S)
BTN: 1x Reset
WiFi: 1x Atheros AR9590 2.4 bgn 3x3
2x Atheros AR9590 5.0 an 3x3
ETH: 2x Gigabit Ethernet (Atheros AR8033 / AR8035)
UART: 115200 8N1 (RJ-45 Cisco)
Installation
------------
1. Grab the OpenWrt initramfs, rename it to ap3715.bin. Place it in
the root directory of a TFTP server and serve it at
192.168.1.66/24.
2. Connect to the serial port and boot the AP. Stop autoboot in U-Boot
by pressing Enter when prompted. Credentials are identical to the one
in the APs interface. By default it is admin / new2day.
3. Alter the bootcmd in U-Boot:
$ setenv ramboot_openwrt "setenv ipaddr 192.168.1.1;
setenv serverip 192.168.1.66; tftpboot 0x2000000 ap3715.bin; bootm"
$ setenv boot_openwrt "sf probe 0; sf read 0x2000000 0x140000 0x1000000;
bootm 0x2000000"
$ setenv bootcmd "run boot_openwrt"
$ saveenv
4. Boot the initramfs image
$ run ramboot_openwrt
5. Transfer the OpenWrt sysupgrade image to the AP using SCP. Install
using sysupgrade.
$ sysupgrade -n <path-to-sysupgrade.bin>
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/mpc85xx/p1010/config-default')
| -rw-r--r-- | target/linux/mpc85xx/p1010/config-default | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/target/linux/mpc85xx/p1010/config-default b/target/linux/mpc85xx/p1010/config-default index 53e077b6c2..6af6b8e097 100644 --- a/target/linux/mpc85xx/p1010/config-default +++ b/target/linux/mpc85xx/p1010/config-default @@ -1,9 +1,11 @@ CONFIG_AT803X_PHY=y CONFIG_CMDLINE_OVERRIDE=y # CONFIG_FSL_CORENET_CF is not set +CONFIG_GPIO_74X164=y CONFIG_MTD_NAND_FSL_IFC=y CONFIG_MTD_SPLIT_FIRMWARE=y CONFIG_MTD_SPLIT_TPLINK_FW=y +CONFIG_MTD_SPLIT_UIMAGE_FW=y CONFIG_MTD_UBI=y CONFIG_MTD_UBI_BEB_LIMIT=20 CONFIG_MTD_UBI_BLOCK=y @@ -18,6 +20,8 @@ CONFIG_REALTEK_PHY=y CONFIG_RED_15W_REV1=y CONFIG_REGMAP=y CONFIG_REGULATOR=y +CONFIG_SPI_GPIO=y CONFIG_TL_WDR4900_V1=y CONFIG_UBIFS_FS=y +CONFIG_WS_AP3715I=y CONFIG_FIREBOX_T10=y
\ No newline at end of file |