diff options
| author | David Bauer <mail@david-bauer.net> | 2019-12-13 21:31:50 +0100 |
|---|---|---|
| committer | David Bauer <mail@david-bauer.net> | 2019-12-14 17:34:57 +0100 |
| commit | 795df809176aa6f19ff6994c3ae1d9bfb309639c (patch) | |
| tree | 6cf604c158de691c060705d8bd0d2e41744711d5 /target/linux/mpc85xx/image | |
| parent | 3959f11005965eb536396a8c258f0ab944eb598d (diff) | |
| download | upstream-795df809176aa6f19ff6994c3ae1d9bfb309639c.tar.gz upstream-795df809176aa6f19ff6994c3ae1d9bfb309639c.tar.bz2 upstream-795df809176aa6f19ff6994c3ae1d9bfb309639c.zip | |
mpc85xx: add support for Enterasys WS-AP3710i
Hardware
--------
SoC: NXP P1020 (2x e500 @ 800MHz)
RAM: 256M DDR3 (Micron)
FLASH: 32M NOR (Spansion S29GL128S)
BTN: 1x Reset
WiFi: 1x Atheros AR9590 2.4 bgn 3x3
2x Atheros AR9590 5.0 an 3x3
ETH: 1x Gigabit Ethernet (Atheros AR8033)
LED: System (green/red) - Radio{0,1} (green)
LAN (connected to PHY)
- GE blue
- FE green
Serial is a Cisco-compatible RJ45 next to the ethernet port.
115200-N-8 are the settings for OS and U-Boot.
Installation
------------
1. Grab the OpenWrt initramfs, rename it to 01C8A8C0.img. Place it in
the root directory of a TFTP server and serve it at
192.168.200.200/24.
2. Connect to the serial port and boot the AP. Stop autoboot in U-Boot
by pressing Enter when prompted. Credentials are identical to the one
in the APs interface. By default it is admin / new2day.
3. Set the bootcmd so the AP can boot OpenWrt by executing
$ setenv boot_openwrt "setenv bootargs;
cp.b 0xee000000 0x1000000 0x1000000; bootm 0x1000000"
$ setenv bootcmd "run boot_openwrt"
$ saveenv
If you plan on going back to the vendor firmware - the bootcmd for it
is stored in the boot_flash variable.
4. Load the initramfs image to RAM and boot by executing
$ tftpboot 0x1000000 192.168.200.200:01C8A8C0.img; bootm
5. Make a backup of the "firmware" partition if you ever wish to go back
to the vendor firmware.
6. Upload the OpenWrt sysupgrade image via SCP to the devices /tmp
folder.
7. Flash OpenWrt using sysupgrade.
$ sysupgrade -n /tmp/openwrt-sysupgrade.bin
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 16b01fb1b9c99513c318109bef96a1a3545c57a0)
Diffstat (limited to 'target/linux/mpc85xx/image')
| -rw-r--r-- | target/linux/mpc85xx/image/Makefile | 10 |
1 files changed, 10 insertions, 0 deletions
diff --git a/target/linux/mpc85xx/image/Makefile b/target/linux/mpc85xx/image/Makefile index c2ddcb32c5..c0e3112741 100644 --- a/target/linux/mpc85xx/image/Makefile +++ b/target/linux/mpc85xx/image/Makefile @@ -98,6 +98,16 @@ define Device/hiveap-330 endef TARGET_DEVICES += hiveap-330 +define Device/ws-ap3710i + DEVICE_TITLE := Enterasys WS-AP3710i + BLOCKSIZE := 128k + KERNEL = kernel-bin | lzma | fit lzma $(KDIR)/image-$$(DEVICE_DTS).dtb + SUPPORTED_DEVICES := enterasys,ws-ap3710i + IMAGES := sysupgrade.bin + IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata +endef +TARGET_DEVICES += ws-ap3710i + define Device/panda DEVICE_TITLE := OCEDO Panda DEVICE_PACKAGES := kmod-rtc-ds1307 uboot-envtools |