aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mpc85xx/image
diff options
context:
space:
mode:
authorDavid Bauer <mail@david-bauer.net>2019-12-13 21:31:50 +0100
committerDavid Bauer <mail@david-bauer.net>2019-12-13 22:40:19 +0100
commit16b01fb1b9c99513c318109bef96a1a3545c57a0 (patch)
treee8f98bb0125d2f398f581c804df568b385300e8a /target/linux/mpc85xx/image
parent1b7199c90c7128e3f81cc4abc6d80ab76a820b12 (diff)
downloadupstream-16b01fb1b9c99513c318109bef96a1a3545c57a0.tar.gz
upstream-16b01fb1b9c99513c318109bef96a1a3545c57a0.tar.bz2
upstream-16b01fb1b9c99513c318109bef96a1a3545c57a0.zip
mpc85xx: add support for Enterasys WS-AP3710i
Hardware -------- SoC: NXP P1020 (2x e500 @ 800MHz) RAM: 256M DDR3 (Micron) FLASH: 32M NOR (Spansion S29GL128S) BTN: 1x Reset WiFi: 1x Atheros AR9590 2.4 bgn 3x3 2x Atheros AR9590 5.0 an 3x3 ETH: 1x Gigabit Ethernet (Atheros AR8033) LED: System (green/red) - Radio{0,1} (green) LAN (connected to PHY) - GE blue - FE green Serial is a Cisco-compatible RJ45 next to the ethernet port. 115200-N-8 are the settings for OS and U-Boot. Installation ------------ 1. Grab the OpenWrt initramfs, rename it to 01C8A8C0.img. Place it in the root directory of a TFTP server and serve it at 192.168.200.200/24. 2. Connect to the serial port and boot the AP. Stop autoboot in U-Boot by pressing Enter when prompted. Credentials are identical to the one in the APs interface. By default it is admin / new2day. 3. Set the bootcmd so the AP can boot OpenWrt by executing $ setenv boot_openwrt "setenv bootargs; cp.b 0xee000000 0x1000000 0x1000000; bootm 0x1000000" $ setenv bootcmd "run boot_openwrt" $ saveenv If you plan on going back to the vendor firmware - the bootcmd for it is stored in the boot_flash variable. 4. Load the initramfs image to RAM and boot by executing $ tftpboot 0x1000000 192.168.200.200:01C8A8C0.img; bootm 5. Make a backup of the "firmware" partition if you ever wish to go back to the vendor firmware. 6. Upload the OpenWrt sysupgrade image via SCP to the devices /tmp folder. 7. Flash OpenWrt using sysupgrade. $ sysupgrade -n /tmp/openwrt-sysupgrade.bin Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/mpc85xx/image')
-rw-r--r--target/linux/mpc85xx/image/Makefile10
1 files changed, 10 insertions, 0 deletions
diff --git a/target/linux/mpc85xx/image/Makefile b/target/linux/mpc85xx/image/Makefile
index ee1663018e..5ca16909e7 100644
--- a/target/linux/mpc85xx/image/Makefile
+++ b/target/linux/mpc85xx/image/Makefile
@@ -102,6 +102,16 @@ define Device/aerohive_hiveap-330
endef
TARGET_DEVICES += aerohive_hiveap-330
+define Device/enterasys_ws-ap3710i
+ DEVICE_VENDOR := Enterasys
+ DEVICE_MODEL := WS-AP3710i
+ BLOCKSIZE := 128k
+ KERNEL = kernel-bin | lzma | fit lzma $(KDIR)/image-$$(DEVICE_DTS).dtb
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+endef
+TARGET_DEVICES += enterasys_ws-ap3710i
+
define Device/ocedo_panda
DEVICE_VENDOR := OCEDO
DEVICE_MODEL := Panda