aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mpc85xx/files
diff options
context:
space:
mode:
authorDavid Bauer <mail@david-bauer.net>2019-10-13 23:37:59 +0200
committerDavid Bauer <mail@david-bauer.net>2019-10-15 18:13:54 +0200
commit07e555d8735e8fa272e3f6abd35acc9f1ab44367 (patch)
tree341c374ac522423d4bf7c215474f789c6032da8b /target/linux/mpc85xx/files
parent07c1ddf522dbe6085af664cf03a41f636a70b99c (diff)
downloadupstream-07e555d8735e8fa272e3f6abd35acc9f1ab44367.tar.gz
upstream-07e555d8735e8fa272e3f6abd35acc9f1ab44367.tar.bz2
upstream-07e555d8735e8fa272e3f6abd35acc9f1ab44367.zip
mpc85xx: correct TP-LINK TL-WDR4900 MAC addresses
This commit fixes TP-Link TL-WDR4900 v1 MAC address assignment. Previously, the MAC addrss was read for the ethernet from the "config" partition. However, the content of this partition is dependent on the firmware which was previously installed on the device. Switch the MAC address source to the U-Boot partition, where the MAC address is always present at a fixed partition. The partition was previously already used for the WiFi MAC-addresses. Reviewed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/mpc85xx/files')
-rw-r--r--target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts6
1 files changed, 3 insertions, 3 deletions
diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts
index 0e0d74c0d8..0998a4933a 100644
--- a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts
+++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts
@@ -49,7 +49,7 @@
#address-cells = <1>;
#size-cells = <1>;
- partition@0 {
+ uboot: partition@0 {
reg = <0x0 0x0050000>;
label = "u-boot";
read-only;
@@ -67,7 +67,7 @@
label = "firmware";
};
- config: partition@fe0000 {
+ partition@fe0000 {
reg = <0x00fe0000 0x00010000>;
label = "config";
read-only;
@@ -119,7 +119,7 @@
enet0: ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
- mtd-mac-address = <&config 0x144>;
+ mtd-mac-address = <&uboot 0x4fc00>;
};
enet1: ethernet@b1000 {