diff options
| author | Pawel Dembicki <paweldembicki@gmail.com> | 2021-08-16 17:42:56 +0200 |
|---|---|---|
| committer | Sungbo Eo <mans0n@gorani.run> | 2021-12-04 09:39:11 +0900 |
| commit | 3843c641d83b621e07f03753a5617ab27e55e262 (patch) | |
| tree | a9eddab944632ce972c08cde020786e22d5dd22c /target/linux/mpc85xx/config-5.4 | |
| parent | e22c91e144d63ccbd7b76b370a53652c48db1d6f (diff) | |
| download | upstream-3843c641d83b621e07f03753a5617ab27e55e262.tar.gz upstream-3843c641d83b621e07f03753a5617ab27e55e262.tar.bz2 upstream-3843c641d83b621e07f03753a5617ab27e55e262.zip | |
kirkwood: add support for Ctera C200 V1 NAS
2-Bay NAS - maximum two 3.5" Harddisks
Hardware:
- SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz
- Ram: 512MB (4x Nanya NT5TU128M8GE-AC)
- NAND Flash: 256MB (Samsung 216 K9F2G08U0C)
- Lan: 1x GBE (Marvell 88E1116R-NNC1)
- Storage: 2x SATA HDD 3.5" Slot
- USB: 2x USB 2.0 port
- Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND)
- LEDs: 13x GPIO controlled
- Buttons: 2x GPIO controlled
Known issues:
- Buzzer is unused due lack of proper driver
Installation:
- Apply factory initramfs image via stock web-gui.
- Do sysupgrade to make installation complete.
Back to stock:
- OpenWrt rootfs partition use unused space after stock firmware.
- Full revert is possible.
- Login via ssh and run: ctera_c200-v1_back_to_factory
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Sungbo Eo <mans0n@gorani.run>
[apply sorting to device recipe]
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Diffstat (limited to 'target/linux/mpc85xx/config-5.4')
0 files changed, 0 insertions, 0 deletions