diff options
author | Pawel Dembicki <paweldembicki@gmail.com> | 2023-04-12 10:43:43 +0200 |
---|---|---|
committer | Christian Lamparter <chunkeey@gmail.com> | 2023-05-14 00:08:35 +0200 |
commit | 95d5a99537a587103976120de0b0ba4d27e07d62 (patch) | |
tree | 5a350e425fe9b5e16f117356425d4fa2fef6de5f /target/linux/mpc85xx/base-files | |
parent | 749237967a122a40465b65c7e9eb6924d8fe09c4 (diff) | |
download | upstream-95d5a99537a587103976120de0b0ba4d27e07d62.tar.gz upstream-95d5a99537a587103976120de0b0ba4d27e07d62.tar.bz2 upstream-95d5a99537a587103976120de0b0ba4d27e07d62.zip |
mpc85xx: add support for Aerohive BR200-WP
The following adds the Aerohive BR200-WP router to OpenWrt under
the mpc85xx/p1010 subtarget.
Hardware:
- SoC: Freescale P1011
- NOR: Intel JS28F512M29EWH 64MB
- Memory: 2x Nanya NT5TU64M16GG-AC 128MB (Total of 256MB)
- 2.4GHz WiFi: Atheros AR9390-AL1A
- Eth1: Atheros AR8035-A PoE
- 2x LEDs
- 1x Button
- PoE PSE
Flashing:
1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a
password of administrator or AhNf?d@ta06 if prompted.
2. Once in U-Boot, tftp boot the initramfs image:
dhcp; setenv serverip 192.168.1.3;
tftpboot 0x2004000 openwrt-mpc85xx-p1010-aerohive_br200-wp-initramfs-kernel.bin;
bootm 0x2004000;
3. Once booted, scp over the sysupgrade file and sysupgrade the device
to flash LEDE to the NOR.
Note:
MAC assigns are taken from stock firmware:
Name MAC addr Mode State Chan(Width) VLAN Radio Hive SSID
-------- -------------- -------- ----- ----------- ---- ---------- ---------- ---------
Mgt0 08ea:44XX:XXc0 - U - 1 - hive0 -
Eth0 08ea:44XX:XXc0 wan U - - - - -
Eth1 08ea:44XX:XXc2 access D - - - hive0 -
Eth2 08ea:44XX:XXc3 access D - - - hive0 -
Eth3 08ea:44XX:XXc4 access D - - - hive0 -
Eth4 08ea:44XX:XXc5 access D - - - hive0 -
Wifi0 08ea:44XX:XXd0 access U 1(20MHz) - radio_ng0 - -
Wifi0.1 08ea:44XX:XXd4 access D 1(20MHz) - radio_ng0 hive0 -
Note2:
PoE PSE could be managed with `realtek-poe` package. Example port
config:
config port
option enable '1'
option id '4'
option name 'lan2'
option poe_plus '0'
option priority '2'
config port
option enable '1'
option id '3'
option name 'lan1'
option poe_plus '0'
option priority '1'
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
(switch@0 -> switch@10, Device's quickstart says LEDs are
amber and white => add function+color properties but keep
labels around, use pr_info)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Diffstat (limited to 'target/linux/mpc85xx/base-files')
-rw-r--r-- | target/linux/mpc85xx/base-files/etc/board.d/02_network | 3 |
1 files changed, 3 insertions, 0 deletions
diff --git a/target/linux/mpc85xx/base-files/etc/board.d/02_network b/target/linux/mpc85xx/base-files/etc/board.d/02_network index 04c27769a9..41859362b5 100644 --- a/target/linux/mpc85xx/base-files/etc/board.d/02_network +++ b/target/linux/mpc85xx/base-files/etc/board.d/02_network @@ -9,6 +9,9 @@ board_config_update board=$(board_name) case "$board" in +aerohive,br200-wp) + ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan" + ;; aerohive,hiveap-330|\ enterasys,ws-ap3715i) ucidef_set_interfaces_lan_wan "eth1" "eth0" |