diff options
| author | David Bauer <mail@david-bauer.net> | 2019-12-13 21:31:50 +0100 |
|---|---|---|
| committer | David Bauer <mail@david-bauer.net> | 2019-12-13 22:40:19 +0100 |
| commit | 16b01fb1b9c99513c318109bef96a1a3545c57a0 (patch) | |
| tree | e8f98bb0125d2f398f581c804df568b385300e8a /target/linux/mpc85xx/base-files | |
| parent | 1b7199c90c7128e3f81cc4abc6d80ab76a820b12 (diff) | |
| download | upstream-16b01fb1b9c99513c318109bef96a1a3545c57a0.tar.gz upstream-16b01fb1b9c99513c318109bef96a1a3545c57a0.tar.bz2 upstream-16b01fb1b9c99513c318109bef96a1a3545c57a0.zip | |
mpc85xx: add support for Enterasys WS-AP3710i
Hardware
--------
SoC: NXP P1020 (2x e500 @ 800MHz)
RAM: 256M DDR3 (Micron)
FLASH: 32M NOR (Spansion S29GL128S)
BTN: 1x Reset
WiFi: 1x Atheros AR9590 2.4 bgn 3x3
2x Atheros AR9590 5.0 an 3x3
ETH: 1x Gigabit Ethernet (Atheros AR8033)
LED: System (green/red) - Radio{0,1} (green)
LAN (connected to PHY)
- GE blue
- FE green
Serial is a Cisco-compatible RJ45 next to the ethernet port.
115200-N-8 are the settings for OS and U-Boot.
Installation
------------
1. Grab the OpenWrt initramfs, rename it to 01C8A8C0.img. Place it in
the root directory of a TFTP server and serve it at
192.168.200.200/24.
2. Connect to the serial port and boot the AP. Stop autoboot in U-Boot
by pressing Enter when prompted. Credentials are identical to the one
in the APs interface. By default it is admin / new2day.
3. Set the bootcmd so the AP can boot OpenWrt by executing
$ setenv boot_openwrt "setenv bootargs;
cp.b 0xee000000 0x1000000 0x1000000; bootm 0x1000000"
$ setenv bootcmd "run boot_openwrt"
$ saveenv
If you plan on going back to the vendor firmware - the bootcmd for it
is stored in the boot_flash variable.
4. Load the initramfs image to RAM and boot by executing
$ tftpboot 0x1000000 192.168.200.200:01C8A8C0.img; bootm
5. Make a backup of the "firmware" partition if you ever wish to go back
to the vendor firmware.
6. Upload the OpenWrt sysupgrade image via SCP to the devices /tmp
folder.
7. Flash OpenWrt using sysupgrade.
$ sysupgrade -n /tmp/openwrt-sysupgrade.bin
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/mpc85xx/base-files')
| -rw-r--r-- | target/linux/mpc85xx/base-files/etc/hotplug.d/ieee80211/10-fix-wifi-mac | 3 |
1 files changed, 3 insertions, 0 deletions
diff --git a/target/linux/mpc85xx/base-files/etc/hotplug.d/ieee80211/10-fix-wifi-mac b/target/linux/mpc85xx/base-files/etc/hotplug.d/ieee80211/10-fix-wifi-mac index f153b53c8e..cd829cb471 100644 --- a/target/linux/mpc85xx/base-files/etc/hotplug.d/ieee80211/10-fix-wifi-mac +++ b/target/linux/mpc85xx/base-files/etc/hotplug.d/ieee80211/10-fix-wifi-mac @@ -12,6 +12,9 @@ PHYNBR=${DEVPATH##*/phy} board=$(board_name) case "$board" in +enterasys,ws-ap3710i) + echo $(mtd_get_mac_ascii cfg2 RADIOADDR${PHYNBR}) > /sys${DEVPATH}/macaddress + ;; ocedo,panda) WMAC=wmac$(($PHYNBR + 1)) MAC=$(mtd_get_mac_ascii uboot-env0 ${WMAC}) |