kernel: bump 5.15 to 5.15.62

Deleted following upstreamed patches:

 bcm27xx: 950-0006-drm-vc4-hdmi-Fix-HPD-GPIO-detection.patch
 bcm27xx: 950-0420-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch
 bcm27xx: 950-0425-drm-vc4-A-present-but-empty-dmas-disables-audio.patch
 bcm27xx: 950-0432-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch
 bcm27xx: 950-0433-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch
 bcm27xx: 950-0435-drm-vc4-Correct-pixel-order-for-DSI0.patch
 bcm27xx: 950-0436-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch
 bcm27xx: 950-0437-drm-vc4-Fix-dsi0-interrupt-support.patch
 bcm27xx: 950-0438-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch
 bcm27xx: 950-0443-drm-vc4-Fix-timings-for-interlaced-modes.patch
 bcm27xx: 950-0445-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch
 bcm27xx: 950-0475-drm-vc4-Reset-HDMI-MISC_CONTROL-register.patch
 bcm27xx: 950-0476-drm-vc4-Release-workaround-buffer-and-DMA-in-error-p.patch
 bcm27xx: 950-0477-drm-vc4-Correct-DSI-divider-calculations.patch
 bcm27xx: 950-0664-drm-vc4-dsi-Correct-max-divider-to-255-not-7.patch

 bcm53xx: 072-next-ARM_dts_BCM53015-add-mr26.patch

 mediatek: 920-linux-next-dts-mt7622-bpi-r64-fix-wps-button.patch

Manually rebased following patches:

 bcm27xx: 950-0004-drm-vc4-hdmi-Remove-the-DDC-probing-for-status-detec.patch
 bcm27xx: 950-0700-net-phy-lan87xx-Decrease-phy-polling-rate.patch
 bcm27xx: 950-0711-drm-vc4-Rename-bridge-to-out_bridge.patch
 bcm27xx: 950-0713-drm-vc4-Remove-splitting-the-bridge-chain-from-the-d.patch
 bcm27xx: 950-0715-drm-vc4-Convert-vc4_dsi-to-using-a-bridge-instead-of.patch
 bcm27xx: 950-0787-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch
 bcm27xx: 950-0914-mmc-block-Don-t-do-single-sector-reads-during-recove.patch

Runtime tested on turris-omnia and glinet-b1300.

Tested-by: John Audia <therealgraysky@proton.me> [bcm2711/RPi4B, mt7622/RT3200]
Signed-off-by: Petr Štetiar <ynezz@true.cz>

2 files changed, 2 insertions, 42 deletions

diff --git a/target/linux/mediatek/patches-5.15/410-bt-mtk-serial-fix.patch b/target/linux/mediatek/patches-5.15/410-bt-mtk-serial-fix.patch
index f5b360a464..a5836a8268 100644
--- a/target/linux/mediatek/patches-5.15/410-bt-mtk-serial-fix.patch
+++ b/target/linux/mediatek/patches-5.15/410-bt-mtk-serial-fix.patch
@@ -1,6 +1,6 @@
 --- a/drivers/tty/serial/8250/8250.h
 +++ b/drivers/tty/serial/8250/8250.h
-@@ -83,6 +83,7 @@ struct serial8250_config {
+@@ -85,6 +85,7 @@ struct serial8250_config {
  #define UART_CAP_MINI	BIT(17)	/* Mini UART on BCM283X family lacks:
  					 * STOP PARITY EPAR SPAR WLEN5 WLEN6
  					 */
@@ -19,7 +19,7 @@
  	},
  	[PORT_NPCM] = {
  		.name		= "Nuvoton 16550",
-@@ -2766,6 +2766,11 @@ serial8250_do_set_termios(struct uart_po
+@@ -2745,6 +2745,11 @@ serial8250_do_set_termios(struct uart_po
  	unsigned long flags;
  	unsigned int baud, quot, frac = 0;
  
diff --git a/target/linux/mediatek/patches-5.15/920-linux-next-dts-mt7622-bpi-r64-fix-wps-button.patch b/target/linux/mediatek/patches-5.15/920-linux-next-dts-mt7622-bpi-r64-fix-wps-button.patch
deleted file mode 100644
index ba852ad286..0000000000
--- a/target/linux/mediatek/patches-5.15/920-linux-next-dts-mt7622-bpi-r64-fix-wps-button.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From dd1d420f40e75c3881a04001e6f2798492ee83c2 Mon Sep 17 00:00:00 2001
-From: Nick Hainke <vincent@systemli.org>
-Date: Thu, 30 Jun 2022 12:32:20 +0200
-Subject: [PATCH] arm64: dts: mt7622: fix BPI-R64 WPS button
-
-The bananapi R64 (BPI-R64) experiences wrong WPS button signals.
-In OpenWrt pushing the WPS button while powering on the device will set
-it to recovery mode. Currently, this also happens without any user
-interaction. In particular, the wrong signals appear while booting the
-device or restarting it, e.g. after doing a system upgrade. If the
-device is in recovery mode the user needs to manually power cycle or
-restart it.
-
-The official BPI-R64 sources set the WPS button to GPIO_ACTIVE_LOW in
-the device tree. This setting seems to suppress the unwanted WPS button
-press signals. So this commit changes the button from GPIO_ACTIVE_HIGH to
-GPIO_ACTIVE_LOW.
-
-The official BPI-R64 sources can be found on
-https://github.com/BPI-SINOVOIP/BPI-R64-openwrt
-
-Fixes: 0b6286dd96c0 ("arm64: dts: mt7622: add bananapi BPI-R64 board")
-
-Suggested-by: INAGAKI Hiroshi <musashino.open@gmail.com>
-Signed-off-by: Nick Hainke <vincent@systemli.org>
----
- arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-@@ -54,7 +54,7 @@
- 		wps {
- 			label = "wps";
- 			linux,code = <KEY_WPS_BUTTON>;
--			gpios = <&pio 102 GPIO_ACTIVE_HIGH>;
-+			gpios = <&pio 102 GPIO_ACTIVE_LOW>;
- 		};
- 	};
-