mediatek: bump to v4.4

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 49064

1 files changed, 0 insertions, 51 deletions

diff --git a/target/linux/mediatek/patches/0022-dt-bindings-thermal-Add-binding-document-for-Mediate.patch b/target/linux/mediatek/patches/0022-dt-bindings-thermal-Add-binding-document-for-Mediate.patch
deleted file mode 100644
index 222fc5527f..0000000000
--- a/target/linux/mediatek/patches/0022-dt-bindings-thermal-Add-binding-document-for-Mediate.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 9b799b8a4ecbf560f8fb996e8e5147a8f7b9a1b3 Mon Sep 17 00:00:00 2001
-From: Sascha Hauer <s.hauer@pengutronix.de>
-Date: Wed, 13 May 2015 10:52:41 +0200
-Subject: [PATCH 22/76] dt-bindings: thermal: Add binding document for
- Mediatek thermal controller
-
-Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
----
- .../bindings/thermal/mediatek-thermal.txt          |   36 ++++++++++++++++++++
- 1 file changed, 36 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
-@@ -0,0 +1,36 @@
-+* Mediatek Thermal
-+
-+This describes the device tree binding for the Mediatek thermal controller
-+which measures the on-SoC temperatures. This device does not have its own ADC,
-+instead it directly controls the AUXADC via AHB bus accesses. For this reason
-+this device needs phandles to the AUXADC.
-+
-+Required properties:
-+- compatible: "mediatek,mt8173-thermal"
-+- reg: Address range of the thermal controller
-+- interrupts: IRQ for the thermal controller
-+- clocks, clock-names: Clocks needed for the thermal controller. required
-+                       clocks are:
-+		"therm":	Main clock needed for register access
-+		"auxadc":	The AUXADC clock
-+- resets, reset-names: Reference to the reset controller controlling the thermal
-+                       controller. Required reset-names:
-+		"therm":	The main reset line
-+- auxadc: A phandle to the AUXADC which the thermal controller uses
-+- apmixedsys: A phandle to the APMIXEDSYS controller.
-+- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description
-+
-+Example:
-+
-+	thermal: thermal@1100b000 {
-+		#thermal-sensor-cells = <1>;
-+		compatible = "mediatek,mt8173-thermal";
-+		reg = <0 0x1100b000 0 0x1000>;
-+		interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
-+		clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
-+		clock-names = "therm", "auxadc";
-+		resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
-+		reset-names = "therm";
-+		auxadc = <&auxadc>;
-+		apmixedsys = <&apmixedsys>;
-+	};