mediatek: remove files and patches for Linux 5.4

All subtargets only provide files and patches for Linux 5.10 by now
so there is little use for the old Linux 5.4 stuff. Remove it.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

1 files changed, 0 insertions, 258 deletions

diff --git a/target/linux/mediatek/patches-5.4/0005-dts-mt7622-add-gsw.patch b/target/linux/mediatek/patches-5.4/0005-dts-mt7622-add-gsw.patch
deleted file mode 100644
index d40cbfb853..0000000000
--- a/target/linux/mediatek/patches-5.4/0005-dts-mt7622-add-gsw.patch
+++ /dev/null
@@ -1,258 +0,0 @@
---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-@@ -53,6 +53,13 @@
- 		};
- 	};
- 
-+	gsw: gsw@0 {
-+		compatible = "mediatek,mt753x";
-+		mediatek,ethsys = <&ethsys>;
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
-@@ -146,6 +153,36 @@
- 	};
- };
- 
-+&gsw {
-+	mediatek,mdio = <&mdio>;
-+	mediatek,portmap = "wllll";
-+	mediatek,mdio_master_pinmux = <0>;
-+	reset-gpios = <&pio 54 0>;
-+	interrupt-parent = <&pio>;
-+	interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
-+	status = "okay";
-+
-+	port5: port@5 {
-+		compatible = "mediatek,mt753x-port";
-+		reg = <5>;
-+		phy-mode = "rgmii";
-+		fixed-link {
-+			speed = <1000>;
-+			full-duplex;
-+		};
-+	};
-+
-+	port6: port@6 {
-+		compatible = "mediatek,mt753x-port";
-+		reg = <6>;
-+		phy-mode = "sgmii";
-+		fixed-link {
-+			speed = <2500>;
-+			full-duplex;
-+		};
-+	};
-+};
-+
- &i2c1 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&i2c1_pins>;
---- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-@@ -1,7 +1,6 @@
- /*
-- * Copyright (c) 2017 MediaTek Inc.
-- * Author: Ming Huang <ming.huang@mediatek.com>
-- *	   Sean Wang <sean.wang@mediatek.com>
-+ * Copyright (c) 2018 MediaTek Inc.
-+ * Author: Ryder Lee <ryder.lee@mediatek.com>
-  *
-  * SPDX-License-Identifier: (GPL-2.0 OR MIT)
-  */
-@@ -14,7 +13,7 @@
- #include "mt6380.dtsi"
- 
- / {
--	model = "MediaTek MT7622 RFB1 board";
-+	model = "MT7622_MT7531 RFB";
- 	compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
- 
- 	aliases {
-@@ -23,7 +22,7 @@
- 
- 	chosen {
- 		stdout-path = "serial0:115200n8";
--		bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
-+		bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512";
- 	};
- 
- 	cpus {
-@@ -40,23 +39,36 @@
- 
- 	gpio-keys {
- 		compatible = "gpio-keys";
--		poll-interval = <100>;
- 
- 		factory {
- 			label = "factory";
- 			linux,code = <BTN_0>;
--			gpios = <&pio 0 0>;
-+			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
- 		};
- 
- 		wps {
- 			label = "wps";
- 			linux,code = <KEY_WPS_BUTTON>;
--			gpios = <&pio 102 0>;
-+			gpios = <&pio 102 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		green {
-+			label = "bpi-r64:pio:green";
-+			gpios = <&pio 89 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		red {
-+			label = "bpi-r64:pio:red";
-+			gpios = <&pio 88 GPIO_ACTIVE_HIGH>;
- 		};
- 	};
- 
- 	memory {
--		reg = <0 0x40000000 0 0x20000000>;
-+		reg = <0 0x40000000 0 0x40000000>;
- 	};
- 
- 	reg_1p8v: regulator-1p8v {
-@@ -101,23 +113,82 @@
- };
- 
- &eth {
--	pinctrl-names = "default";
--	pinctrl-0 = <&eth_pins>;
- 	status = "okay";
-+	gmac0: mac@0 {
-+		compatible = "mediatek,eth-mac";
-+		reg = <0>;
-+		phy-mode = "2500base-x";
-+
-+		fixed-link {
-+			speed = <2500>;
-+			full-duplex;
-+			pause;
-+		};
-+	};
- 
- 	gmac1: mac@1 {
- 		compatible = "mediatek,eth-mac";
- 		reg = <1>;
--		phy-handle = <&phy5>;
-+		phy-mode = "rgmii";
-+
-+		fixed-link {
-+			speed = <1000>;
-+			full-duplex;
-+			pause;
-+		};
- 	};
- 
--	mdio-bus {
-+	mdio: mdio-bus {
- 		#address-cells = <1>;
- 		#size-cells = <0>;
- 
--		phy5: ethernet-phy@5 {
--			reg = <5>;
--			phy-mode = "sgmii";
-+		switch@0 {
-+			compatible = "mediatek,mt7531";
-+			reg = <0>;
-+			reset-gpios = <&pio 54 0>;
-+
-+			ports {
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+
-+				port@0 {
-+					reg = <0>;
-+					label = "lan1";
-+				};
-+
-+				port@1 {
-+					reg = <1>;
-+					label = "lan2";
-+				};
-+
-+				port@2 {
-+					reg = <2>;
-+					label = "lan3";
-+				};
-+
-+				port@3 {
-+					reg = <3>;
-+					label = "lan4";
-+				};
-+
-+				port@4 {
-+					reg = <4>;
-+					label = "wan";
-+				};
-+
-+				port@6 {
-+					reg = <6>;
-+					label = "cpu";
-+					ethernet = <&gmac0>;
-+					phy-mode = "2500base-x";
-+
-+					fixed-link {
-+						speed = <2500>;
-+						full-duplex;
-+						pause;
-+					};
-+				};
-+			};
- 		};
- 	};
- };
-@@ -185,15 +256,28 @@
- 
- &pcie {
- 	pinctrl-names = "default";
--	pinctrl-0 = <&pcie0_pins>;
-+	pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>;
- 	status = "okay";
- 
- 	pcie@0,0 {
- 		status = "okay";
- 	};
-+
-+	pcie@1,0 {
-+		status = "okay";
-+	};
- };
- 
- &pio {
-+	/* Attention: GPIO 90 is used to switch between PCIe@1,0 and
-+	 * SATA functions. i.e. output-high: PCIe, output-low: SATA
-+	 */
-+	asm_sel {
-+		gpio-hog;
-+		gpios = <90 GPIO_ACTIVE_HIGH>;
-+		output-high;
-+	};
-+
- 	/* eMMC is shared pin with parallel NAND */
- 	emmc_pins_default: emmc-pins-default {
- 		mux {
-@@ -460,11 +544,11 @@
- };
- 
- &sata {
--	status = "okay";
-+	status = "disable";
- };
- 
- &sata_phy {
--	status = "okay";
-+	status = "disable";
- };
- 
- &spi0 {