mediatek: rework support for BananaPi BPi-R64

**What's new**

 * Bring support for the Bananapi BPi-R64 to the level desirable for
   a nice hackable routerboard.
 * Use ARM Trusted Firmware A from source. (goodbye binary preloader)
 * Use Das U-Boot from source. (see previous commit)
 * Assemble SD-card image using OpenWrt image-commands.
   (no gen_sd_cruz_foo.sh added, this is not Raspbian)
 * Updated kernel options to support root filesystem.
 * Updated DTS to match OpenWrt LAN ports, known LEDs, buttons, ...
 * Detect root device, handle sysupgrade, config restore, ...
 * Wire up (known) LEDs and buttons in OpenWrt-fashion.
 * Build one set of images from SD-card and eMMC.
 * Hopefully provide a good example of how things can be done right
   from scratch.

**Installation and images**

 * Have an empty SD-card at hand
 * Write stuff to the card, as root (card device is /dev/mmcblkX)
   - write header, gpt, bl2, atf, u-boot and recovery kernel:
     `cat *bpi-r64-boot-sdcard.img *bpi-r64-initramfs-recovery.fit > /dev/mmcblkX`
   - rescan partitions:
     `blockdev --rereadpt /dev/mmcblkX`
   - write main system to production partition:
     `cat *bpi-r64-squashfs-sysupgrade.fit > /dev/mmcblkXp5`

 * Installation to eMMC works using SD-card bootloader via TFTP
   When running OpenWrt of SD-card, issue this to trigger installation
   to eMMC:
   `fw_setenv bootcmd run emmc_init`
   Be prepared to serve the content of bin/targets/mediatek/mt7622 on
   TFTP server address 192.168.1.254.

**What's missing**

 * The red LED is always on, probably a hardware bug.
 * AHCI (probably needs DTS changes)
 * Ship SD-card image ready with every needed for eMMC install.
 * The eMMC has a second, currently unused boot partition. This would
   be ideal to store the WiFi EEPROM and Ethernet MAC address(es).
   @sinovoip ideas?

Thanks to Thomas Hühn @thuehn for providing the hardware!

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

1 files changed, 56 insertions, 0 deletions

diff --git a/target/linux/mediatek/patches-5.10/112-dts-fix-bpi64-leds-and-buttons.patch b/target/linux/mediatek/patches-5.10/112-dts-fix-bpi64-leds-and-buttons.patch
new file mode 100644
index 0000000000..8b6d3d4934
--- /dev/null
+++ b/target/linux/mediatek/patches-5.10/112-dts-fix-bpi64-leds-and-buttons.patch
@@ -0,0 +1,56 @@
+--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
++++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+@@ -18,6 +18,10 @@
+ 
+ 	aliases {
+ 		serial0 = &uart0;
++		led-boot = &led_system_green;
++		led-failsafe = &led_system_blue;
++		led-running = &led_system_green;
++		led-upgrade = &led_system_blue;
+ 	};
+ 
+ 	chosen {
+@@ -41,8 +45,8 @@
+ 		compatible = "gpio-keys";
+ 
+ 		factory {
+-			label = "factory";
+-			linux,code = <BTN_0>;
++			label = "reset";
++			linux,code = <KEY_RESTART>;
+ 			gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
+ 		};
+ 
+@@ -56,17 +60,25 @@
+ 	leds {
+ 		compatible = "gpio-leds";
+ 
+-		green {
+-			label = "bpi-r64:pio:green";
+-			gpios = <&pio 89 GPIO_ACTIVE_HIGH>;
++		led_system_blue: blue {
++			label = "bpi-r64:pio:blue";
++			gpios = <&pio 85 GPIO_ACTIVE_LOW>;
+ 			default-state = "off";
+ 		};
+ 
+-		red {
+-			label = "bpi-r64:pio:red";
+-			gpios = <&pio 88 GPIO_ACTIVE_HIGH>;
++		led_system_green: green {
++			label = "bpi-r64:pio:green";
++			gpios = <&pio 89 GPIO_ACTIVE_HIGH>;
+ 			default-state = "off";
+ 		};
++
++/*
++ *		red {
++ *			label = "bpi-r64:pio:red";
++ *			gpios = <&pio 88 GPIO_ACTIVE_HIGH>;
++ *			default-state = "off";
++ *		};
++ */
+ 	};
+ 
+ 	memory {