diff options
author | Chukun Pan <amadeus@jmu.edu.cn> | 2023-02-10 23:08:25 +0800 |
---|---|---|
committer | Daniel Golle <daniel@makrotopia.org> | 2023-04-22 04:10:19 +0100 |
commit | 21be2c26d555b33e9faf85be3e980876810b29d3 (patch) | |
tree | a43ce1febdaa9e58f206c79f479927588ca30e75 /target/linux/mediatek/filogic | |
parent | cc00e220291c9d894fef42d19ee9c59136962123 (diff) | |
download | upstream-21be2c26d555b33e9faf85be3e980876810b29d3.tar.gz upstream-21be2c26d555b33e9faf85be3e980876810b29d3.tar.bz2 upstream-21be2c26d555b33e9faf85be3e980876810b29d3.zip |
mediatek: add support for TP-Link TL-XDR4288/608x
Hardware specification:
SoC: MediaTek MT7986A 4x A53
Flash: ESMT F50L1G41LB 128MB
RAM: ESMT M15T4G16256A 512MB
Ethernet (Max Speed):
XDR4288: 1x 2.5G Wan, 1x 2.5G Lan, 4x 1G Lan
XDR6086: 1x 2.5G Wan, 1x 2.5G Lan, 1x 1G Lan
XDR6088: 1x 2.5G Wan, 1x 2.5G Lan, 4x 1G Lan
WiFi:
XDR4288: MT7976DAN (2.4G 2T2R, 5G 3T3R)
XDR6086/XDR6088:
WiFi1: MT7976GN 2.4GHz 4T4R
WiFi2: MT7976AN 5GHz 4T4R
Button: Reset, WPS, Turbo
USB: 1 x USB 3.0
Power: DC 12V 4A
Flash instructions:
1. Execute the following operation to open nc shell:
https://openwrt.org/inbox/toh/tp-link/xdr-6086#rooting
2. Replace the stock bootloader to OpenWrt's:
dd bs=131072 conv=sync of=/dev/mtdblock9 if=/tmp/xxx-preloader.bin
dd bs=131072 conv=sync of=/dev/mtdblock9 seek=28 if=/tmp/xxx-bl31-uboot.fip
3. Connect to your PC via the Gigabit port of the router,
set a static ip on the ethernet interface of your PC.
(ip 192.168.1.254, gateway 192.168.1.1)
4. Download the initramfs image, and restart the router,
waiting for tftp recovery to complete.
5. After openwrt boots up, perform sysupgrade.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
[Add uboot build, fit and sysupgrade support, fix RealTek PHYs]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Diffstat (limited to 'target/linux/mediatek/filogic')
3 files changed, 19 insertions, 4 deletions
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index 6cb9e1478e..4207a5873f 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -20,6 +20,13 @@ mediatek_setup_interfaces() mediatek,mt7986b-rfb) ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" eth1 ;; + tplink,tl-xdr4288|\ + tplink,tl-xdr6088) + ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5" eth1 + ;; + tplink,tl-xdr6086) + ucidef_set_interfaces_lan_wan "lan1 lan2" eth1 + ;; xiaomi,redmi-router-ax6000-stock|\ xiaomi,redmi-router-ax6000-ubootmod) ucidef_set_interfaces_lan_wan "lan2 lan3 lan4" wan diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index ecaf2eadcd..b4c1c8f1d0 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -24,4 +24,9 @@ case "$board" in [ "$PHYNBR" = "0" ] && macaddr_unsetbit $addr 6 > /sys${DEVPATH}/macaddress [ "$PHYNBR" = "1" ] && macaddr_setbit $addr 6 > /sys${DEVPATH}/macaddress ;; + tplink,tl-xdr4288|\ + tplink,tl-xdr6086|\ + tplink,tl-xdr6088) + [ "$PHYNBR" = "0" ] && get_mac_label > /sys${DEVPATH}/macaddress + ;; esac diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh index ca09741030..9dafe1a97b 100755 --- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh @@ -67,15 +67,18 @@ platform_do_upgrade() { ;; esac ;; + tplink,tl-xdr4288|\ + tplink,tl-xdr6086|\ + tplink,tl-xdr6088|\ + xiaomi,redmi-router-ax6000-ubootmod) + CI_KERNPART="fit" + nand_do_upgrade "$1" + ;; xiaomi,redmi-router-ax6000-stock) CI_KERN_UBIPART=ubi_kernel CI_ROOT_UBIPART=ubi nand_do_upgrade "$1" ;; - xiaomi,redmi-router-ax6000-ubootmod) - CI_KERNPART="fit" - nand_do_upgrade "$1" - ;; *) nand_do_upgrade "$1" ;; |