mediatek: remove files and patches for Linux 5.4

All subtargets only provide files and patches for Linux 5.10 by now
so there is little use for the old Linux 5.4 stuff. Remove it.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

1 files changed, 0 insertions, 792 deletions

diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/led.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/led.c
deleted file mode 100644
index c00c331d8a..0000000000
--- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/led.c
+++ /dev/null
@@ -1,792 +0,0 @@
-/*
- * Copyright (C) 2013 Realtek Semiconductor Corp.
- * All Rights Reserved.
- *
- * Unless you and Realtek execute a separate written software license
- * agreement governing use of this software, this software is licensed
- * to you under the terms of the GNU General Public License version 2,
- * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt
- *
- * $Revision: 76306 $
- * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $
- *
- * Purpose : RTK switch high-level API for RTL8367/RTL8367C
- * Feature : Here is a list of all functions and variables in LED module.
- *
- */
-
-#include <rtk_switch.h>
-#include <rtk_error.h>
-#include <led.h>
-#include <string.h>
-
-#include <rtl8367c_asicdrv.h>
-#include <rtl8367c_asicdrv_led.h>
-
-
-/* Function Name:
- *      rtk_led_enable_set
- * Description:
- *      Set Led enable congiuration
- * Input:
- *      group       - LED group id.
- *      pPortmask   - LED enable port mask.
- * Output:
- *      None
- * Return:
- *      RT_ERR_OK           - OK
- *      RT_ERR_FAILED       - Failed
- *      RT_ERR_SMI          - SMI access error
- *      RT_ERR_INPUT        - Invalid input parameters.
- *      RT_ERR_PORT_MASK    - Error portmask
- * Note:
- *      The API can be used to enable LED per port per group.
- */
-rtk_api_ret_t rtk_led_enable_set(rtk_led_group_t group, rtk_portmask_t *pPortmask)
-{
-    rtk_api_ret_t retVal;
-    rtk_uint32 pmask;
-    rtk_port_t port;
-
-    /* Check initialization state */
-    RTK_CHK_INIT_STATE();
-
-    if (group >= LED_GROUP_END)
-        return RT_ERR_INPUT;
-
-    RTK_CHK_PORTMASK_VALID(pPortmask);
-
-    RTK_PORTMASK_SCAN((*pPortmask), port)
-    {
-        if(rtk_switch_isCPUPort(port) == RT_ERR_OK)
-            return RT_ERR_PORT_MASK;
-    }
-
-    if((retVal = rtk_switch_portmask_L2P_get(pPortmask, &pmask)) != RT_ERR_OK)
-        return retVal;
-
-    if ((retVal = rtl8367c_setAsicLedGroupEnable(group, pmask)) != RT_ERR_OK)
-        return retVal;
-
-    return RT_ERR_OK;
-}
-
-/* Function Name:
- *      rtk_led_enable_get
- * Description:
- *      Get Led enable congiuration
- * Input:
- *      group - LED group id.
- * Output:
- *      pPortmask - LED enable port mask.
- * Return:
- *      RT_ERR_OK           - OK
- *      RT_ERR_FAILED       - Failed
- *      RT_ERR_SMI          - SMI access error
- *      RT_ERR_INPUT        - Invalid input parameters.
- * Note:
- *      The API can be used to get LED enable status.
- */
-rtk_api_ret_t rtk_led_enable_get(rtk_led_group_t group, rtk_portmask_t *pPortmask)
-{
-    rtk_api_ret_t retVal;
-    rtk_uint32 pmask;
-
-    /* Check initialization state */
-    RTK_CHK_INIT_STATE();
-
-    if (group >= LED_GROUP_END)
-        return RT_ERR_INPUT;
-
-    if ((retVal = rtl8367c_getAsicLedGroupEnable(group, &pmask)) != RT_ERR_OK)
-        return retVal;
-
-    if((retVal = rtk_switch_portmask_P2L_get(pmask, pPortmask)) != RT_ERR_OK)
-        return retVal;
-
-    return RT_ERR_OK;
-
-}
-
-/* Function Name:
- *      rtk_led_operation_set
- * Description:
- *      Set Led operation mode
- * Input:
- *      mode - LED operation mode.
- * Output:
- *      None
- * Return:
- *      RT_ERR_OK           - OK
- *      RT_ERR_FAILED       - Failed
- *      RT_ERR_SMI          - SMI access error
- *      RT_ERR_INPUT        - Invalid input parameters.
- * Note:
- *      The API can set Led operation mode.
- *      The modes that can be set are as following:
- *      - LED_OP_SCAN,
- *      - LED_OP_PARALLEL,
- *      - LED_OP_SERIAL,
- */
-rtk_api_ret_t rtk_led_operation_set(rtk_led_operation_t mode)
-{
-    rtk_api_ret_t retVal;
-    rtk_uint32 regData;
-
-    /* Check initialization state */
-    RTK_CHK_INIT_STATE();
-
-    if ( mode >= LED_OP_END)
-      return RT_ERR_INPUT;
-
-    switch (mode)
-    {
-        case LED_OP_PARALLEL:
-            regData = LEDOP_PARALLEL;
-            break;
-        case LED_OP_SERIAL:
-            regData = LEDOP_SERIAL;
-            break;
-        default:
-            return RT_ERR_CHIP_NOT_SUPPORTED;
-            break;
-    }
-
-    if ((retVal = rtl8367c_setAsicLedOperationMode(regData)) != RT_ERR_OK)
-        return retVal;
-
-    return RT_ERR_OK;
-}
-
-/* Function Name:
- *      rtk_led_operation_get
- * Description:
- *      Get Led operation mode
- * Input:
- *      None
- * Output:
- *      pMode - Support LED operation mode.
- * Return:
- *      RT_ERR_OK           - OK
- *      RT_ERR_FAILED       - Failed
- *      RT_ERR_SMI          - SMI access error
- *      RT_ERR_INPUT        - Invalid input parameters.
- * Note:
- *      The API can get Led operation mode.
- *      The modes that can be set are as following:
- *      - LED_OP_SCAN,
- *      - LED_OP_PARALLEL,
- *      - LED_OP_SERIAL,
- */
-rtk_api_ret_t rtk_led_operation_get(rtk_led_operation_t *pMode)
-{
-    rtk_api_ret_t retVal;
-    rtk_uint32 regData;
-
-    /* Check initialization state */
-    RTK_CHK_INIT_STATE();
-
-    if(NULL == pMode)
-        return RT_ERR_NULL_POINTER;
-
-    if ((retVal = rtl8367c_getAsicLedOperationMode(&regData)) != RT_ERR_OK)
-        return retVal;
-
-    if (regData == LEDOP_SERIAL)
-        *pMode = LED_OP_SERIAL;
-    else if (regData ==LEDOP_PARALLEL)
-        *pMode = LED_OP_PARALLEL;
-    else
-       return RT_ERR_FAILED;
-
-    return RT_ERR_OK;
-}
-
-/* Function Name:
- *      rtk_led_modeForce_set
- * Description:
- *      Set Led group to congiuration force mode
- * Input:
- *      port    - port ID
- *      group   - Support LED group id.
- *      mode    - Support LED force mode.
- * Output:
- *      None
- * Return:
- *      RT_ERR_OK           - OK
- *      RT_ERR_FAILED       - Failed
- *      RT_ERR_SMI          - SMI access error
- *      RT_ERR_INPUT        - Invalid input parameters.
- *      RT_ERR_PORT_ID      - Error Port ID
- * Note:
- *      The API can force to one force mode.
- *      The force modes that can be set are as following:
- *      - LED_FORCE_NORMAL,
- *      - LED_FORCE_BLINK,
- *      - LED_FORCE_OFF,
- *      - LED_FORCE_ON.
- */
-rtk_api_ret_t rtk_led_modeForce_set(rtk_port_t port, rtk_led_group_t group, rtk_led_force_mode_t mode)
-{
-    rtk_api_ret_t retVal;
-
-    /* Check initialization state */
-    RTK_CHK_INIT_STATE();
-
-    /* Check Port Valid */
-    RTK_CHK_PORT_VALID(port);
-
-    /* No LED for CPU port */
-    if(rtk_switch_isCPUPort(port) == RT_ERR_OK)
-        return RT_ERR_PORT_ID;
-
-    if (group >= LED_GROUP_END)
-        return RT_ERR_INPUT;
-
-    if (mode >= LED_FORCE_END)
-        return RT_ERR_NOT_ALLOWED;
-
-    if ((retVal = rtl8367c_setAsicForceLed(rtk_switch_port_L2P_get(port), group, mode)) != RT_ERR_OK)
-        return retVal;
-
-    return RT_ERR_OK;
-}
-
-/* Function Name:
- *      rtk_led_modeForce_get
- * Description:
- *      Get Led group to congiuration force mode
- * Input:
- *      port  - port ID
- *      group - Support LED group id.
- *      pMode - Support LED force mode.
- * Output:
- *      None
- * Return:
- *      RT_ERR_OK           - OK
- *      RT_ERR_FAILED       - Failed
- *      RT_ERR_SMI          - SMI access error
- *      RT_ERR_INPUT        - Invalid input parameters.
- *      RT_ERR_PORT_ID      - Error Port ID
- * Note:
- *      The API can get forced Led group mode.
- *      The force modes that can be set are as following:
- *      - LED_FORCE_NORMAL,
- *      - LED_FORCE_BLINK,
- *      - LED_FORCE_OFF,
- *      - LED_FORCE_ON.
- */
-rtk_api_ret_t rtk_led_modeForce_get(rtk_port_t port, rtk_led_group_t group, rtk_led_force_mode_t *pMode)
-{
-    rtk_api_ret_t retVal;
-
-    /* Check initialization state */
-    RTK_CHK_INIT_STATE();
-
-    /* Check Port Valid */
-    RTK_CHK_PORT_VALID(port);
-
-    /* No LED for CPU port */
-    if(rtk_switch_isCPUPort(port) == RT_ERR_OK)
-        return RT_ERR_PORT_ID;
-
-    if (group >= LED_GROUP_END)
-        return RT_ERR_INPUT;
-
-    if (NULL == pMode)
-        return RT_ERR_NULL_POINTER;
-
-    if ((retVal = rtl8367c_getAsicForceLed(rtk_switch_port_L2P_get(port), group, pMode)) != RT_ERR_OK)
-        return retVal;
-
-    return RT_ERR_OK;
-}
-
-/* Function Name:
- *      rtk_led_blinkRate_set
- * Description:
- *      Set LED blinking rate
- * Input:
- *      blinkRate - blinking rate.
- * Output:
- *      None
- * Return:
- *      RT_ERR_OK           - OK
- *      RT_ERR_FAILED       - Failed
- *      RT_ERR_SMI          - SMI access error
- *      RT_ERR_INPUT        - Invalid input parameters.
- * Note:
- *      ASIC support 6 types of LED blinking rates at 43ms, 84ms, 120ms, 170ms, 340ms and 670ms.
- */
-rtk_api_ret_t rtk_led_blinkRate_set(rtk_led_blink_rate_t blinkRate)
-{
-    rtk_api_ret_t retVal;
-
-    /* Check initialization state */
-    RTK_CHK_INIT_STATE();
-
-    if (blinkRate >= LED_BLINKRATE_END)
-        return RT_ERR_FAILED;
-
-    if ((retVal = rtl8367c_setAsicLedBlinkRate(blinkRate)) != RT_ERR_OK)
-        return retVal;
-
-    return RT_ERR_OK;
-}
-
-/* Function Name:
- *      rtk_led_blinkRate_get
- * Description:
- *      Get LED blinking rate at mode 0 to mode 3
- * Input:
- *      None
- * Output:
- *      pBlinkRate - blinking rate.
- * Return:
- *      RT_ERR_OK           - OK
- *      RT_ERR_FAILED       - Failed
- *      RT_ERR_SMI          - SMI access error
- *      RT_ERR_INPUT        - Invalid input parameters.
- * Note:
- *      There are  6 types of LED blinking rates at 43ms, 84ms, 120ms, 170ms, 340ms and 670ms.
- */
-rtk_api_ret_t rtk_led_blinkRate_get(rtk_led_blink_rate_t *pBlinkRate)
-{
-    rtk_api_ret_t retVal;
-
-    /* Check initialization state */
-    RTK_CHK_INIT_STATE();
-
-    if(NULL == pBlinkRate)
-        return RT_ERR_NULL_POINTER;
-
-    if ((retVal = rtl8367c_getAsicLedBlinkRate(pBlinkRate)) != RT_ERR_OK)
-        return retVal;
-
-    return RT_ERR_OK;
-}
-
-/* Function Name:
- *      rtk_led_groupConfig_set
- * Description:
- *      Set per group Led to congiuration mode
- * Input:
- *      group   - LED group.
- *      config  - LED configuration
- * Output:
- *      None
- * Return:
- *      RT_ERR_OK           - OK
- *      RT_ERR_FAILED       - Failed
- *      RT_ERR_SMI          - SMI access error
- *      RT_ERR_INPUT        - Invalid input parameters.
- * Note:
- *      The API can set LED indicated information configuration for each LED group with 1 to 1 led mapping to each port.
- *      - Definition  LED Statuses      Description
- *      - 0000        LED_Off           LED pin Tri-State.
- *      - 0001        Dup/Col           Collision, Full duplex Indicator.
- *      - 0010        Link/Act          Link, Activity Indicator.
- *      - 0011        Spd1000           1000Mb/s Speed Indicator.
- *      - 0100        Spd100            100Mb/s Speed Indicator.
- *      - 0101        Spd10             10Mb/s Speed Indicator.
- *      - 0110        Spd1000/Act       1000Mb/s Speed/Activity Indicator.
- *      - 0111        Spd100/Act        100Mb/s Speed/Activity Indicator.
- *      - 1000        Spd10/Act         10Mb/s Speed/Activity Indicator.
- *      - 1001        Spd100 (10)/Act   10/100Mb/s Speed/Activity Indicator.
- *      - 1010        LoopDetect        LoopDetect Indicator.
- *      - 1011        EEE               EEE Indicator.
- *      - 1100        Link/Rx           Link, Activity Indicator.
- *      - 1101        Link/Tx           Link, Activity Indicator.
- *      - 1110        Master            Link on Master Indicator.
- *      - 1111        Act               Activity Indicator. Low for link established.
- */
-rtk_api_ret_t rtk_led_groupConfig_set(rtk_led_group_t group, rtk_led_congig_t config)
-{
-    rtk_api_ret_t retVal;
-
-    /* Check initialization state */
-    RTK_CHK_INIT_STATE();
-
-    if (LED_GROUP_END <= group)
-        return RT_ERR_FAILED;
-
-    if (LED_CONFIG_END <= config)
-        return RT_ERR_FAILED;
-
-    if ((retVal = rtl8367c_setAsicLedIndicateInfoConfig(group, config)) != RT_ERR_OK)
-        return retVal;
-
-    return RT_ERR_OK;
-}
-
-/* Function Name:
- *      rtk_led_groupConfig_get
- * Description:
- *      Get Led group congiuration mode
- * Input:
- *      group - LED group.
- * Output:
- *      pConfig - LED configuration.
- * Return:
- *      RT_ERR_OK           - OK
- *      RT_ERR_FAILED       - Failed
- *      RT_ERR_SMI          - SMI access error
- *      RT_ERR_INPUT        - Invalid input parameters.
- * Note:
- *       The API can get LED indicated information configuration for each LED group.
- */
-rtk_api_ret_t rtk_led_groupConfig_get(rtk_led_group_t group, rtk_led_congig_t *pConfig)
-{
-    rtk_api_ret_t retVal;
-
-    /* Check initialization state */
-    RTK_CHK_INIT_STATE();
-
-    if (LED_GROUP_END <= group)
-        return RT_ERR_FAILED;
-
-    if(NULL == pConfig)
-        return RT_ERR_NULL_POINTER;
-
-    if ((retVal = rtl8367c_getAsicLedIndicateInfoConfig(group, pConfig)) != RT_ERR_OK)
-        return retVal;
-
-    return RT_ERR_OK;
-}
-
-/* Function Name:
- *      rtk_led_groupAbility_set
- * Description:
- *      Configure per group Led ability
- * Input:
- *      group    - LED group.
- *      pAbility - LED ability
- * Output:
- *      None
- * Return:
- *      RT_ERR_OK           - OK
- *      RT_ERR_FAILED       - Failed
- *      RT_ERR_SMI          - SMI access error
- *      RT_ERR_INPUT        - Invalid input parameters.
- * Note:
- *      None.
- */
-
-rtk_api_ret_t rtk_led_groupAbility_set(rtk_led_group_t group, rtk_led_ability_t *pAbility)
-{
-    rtk_api_ret_t retVal;
-    rtk_uint32 regData;
-
-    /* Check initialization state */
-    RTK_CHK_INIT_STATE();
-
-    if (LED_GROUP_END <= group)
-        return RT_ERR_FAILED;
-
-    if(pAbility == NULL)
-        return RT_ERR_NULL_POINTER;
-
-    if( (pAbility->link_10m >= RTK_ENABLE_END) || (pAbility->link_100m >= RTK_ENABLE_END)||
-        (pAbility->link_500m >= RTK_ENABLE_END) || (pAbility->link_1000m >= RTK_ENABLE_END)||
-        (pAbility->act_rx >= RTK_ENABLE_END) || (pAbility->act_tx >= RTK_ENABLE_END) )
-    {
-        return RT_ERR_INPUT;
-    }
-
-    if ((retVal = rtl8367c_getAsicReg(RTL8367C_REG_LED0_DATA_CTRL + (rtk_uint32)group, &regData)) != RT_ERR_OK)
-        return retVal;
-
-    if(pAbility->link_10m == ENABLED)
-        regData |= 0x0001;
-    else
-        regData &= ~0x0001;
-
-    if(pAbility->link_100m == ENABLED)
-        regData |= 0x0002;
-    else
-        regData &= ~0x0002;
-
-    if(pAbility->link_500m == ENABLED)
-        regData |= 0x0004;
-    else
-        regData &= ~0x0004;
-
-    if(pAbility->link_1000m == ENABLED)
-        regData |= 0x0008;
-    else
-        regData &= ~0x0008;
-
-    if(pAbility->act_rx == ENABLED)
-        regData |= 0x0010;
-    else
-        regData &= ~0x0010;
-
-    if(pAbility->act_tx == ENABLED)
-        regData |= 0x0020;
-    else
-        regData &= ~0x0020;
-
-    regData |= (0x0001 << 6);
-
-    if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_LED0_DATA_CTRL + (rtk_uint32)group, regData)) != RT_ERR_OK)
-        return retVal;
-
-    return RT_ERR_OK;
-}
-
-/* Function Name:
- *      rtk_led_groupAbility_get
- * Description:
- *      Get per group Led ability
- * Input:
- *      group    - LED group.
- *      pAbility - LED ability
- * Output:
- *      None
- * Return:
- *      RT_ERR_OK           - OK
- *      RT_ERR_FAILED       - Failed
- *      RT_ERR_SMI          - SMI access error
- *      RT_ERR_INPUT        - Invalid input parameters.
- * Note:
- *      None.
- */
-
-rtk_api_ret_t rtk_led_groupAbility_get(rtk_led_group_t group, rtk_led_ability_t *pAbility)
-{
-    rtk_api_ret_t retVal;
-    rtk_uint32 regData;
-
-    /* Check initialization state */
-    RTK_CHK_INIT_STATE();
-
-    if (LED_GROUP_END <= group)
-        return RT_ERR_FAILED;
-
-    if(pAbility == NULL)
-        return RT_ERR_NULL_POINTER;
-
-    if ((retVal = rtl8367c_getAsicReg(RTL8367C_REG_LED0_DATA_CTRL + (rtk_uint32)group, &regData)) != RT_ERR_OK)
-        return retVal;
-
-    pAbility->link_10m = (regData & 0x0001) ? ENABLED : DISABLED;
-    pAbility->link_100m = (regData & 0x0002) ? ENABLED : DISABLED;
-    pAbility->link_500m = (regData & 0x0004) ? ENABLED : DISABLED;
-    pAbility->link_1000m = (regData & 0x0008) ? ENABLED : DISABLED;
-    pAbility->act_rx = (regData & 0x0010) ? ENABLED : DISABLED;
-    pAbility->act_tx = (regData & 0x0020) ? ENABLED : DISABLED;
-
-    return RT_ERR_OK;
-}
-
-
-/* Function Name:
- *      rtk_led_serialMode_set
- * Description:
- *      Set Led serial mode active congiuration
- * Input:
- *      active - LED group.
- * Output:
- *      None
- * Return:
- *      RT_ERR_OK           - OK
- *      RT_ERR_FAILED       - Failed
- *      RT_ERR_SMI          - SMI access error
- *      RT_ERR_INPUT        - Invalid input parameters.
- * Note:
- *      The API can set LED serial mode active congiuration.
- */
-rtk_api_ret_t rtk_led_serialMode_set(rtk_led_active_t active)
-{
-    rtk_api_ret_t retVal;
-
-    /* Check initialization state */
-    RTK_CHK_INIT_STATE();
-
-    if ( active >= LED_ACTIVE_END)
-        return RT_ERR_INPUT;
-
-     if ((retVal = rtl8367c_setAsicLedSerialModeConfig(active,1))!=RT_ERR_OK)
-        return retVal;
-
-    return RT_ERR_OK;
-}
-
-/* Function Name:
- *      rtk_led_serialMode_get
- * Description:
- *      Get Led group congiuration mode
- * Input:
- *      group - LED group.
- * Output:
- *      pConfig - LED configuration.
- * Return:
- *      RT_ERR_OK           - OK
- *      RT_ERR_FAILED       - Failed
- *      RT_ERR_SMI          - SMI access error
- *      RT_ERR_INPUT        - Invalid input parameters.
- * Note:
- *       The API can get LED serial mode active configuration.
- */
-rtk_api_ret_t rtk_led_serialMode_get(rtk_led_active_t *pActive)
-{
-    rtk_api_ret_t retVal;
-    rtk_uint32 regData;
-
-    /* Check initialization state */
-    RTK_CHK_INIT_STATE();
-
-    if(NULL == pActive)
-        return RT_ERR_NULL_POINTER;
-
-    if ((retVal = rtl8367c_getAsicLedSerialModeConfig(pActive,&regData))!=RT_ERR_OK)
-        return retVal;
-
-    return RT_ERR_OK;
-}
-
-/* Function Name:
- *      rtk_led_OutputEnable_set
- * Description:
- *      This API set LED I/O state.
- * Input:
- *      enabled     - LED I/O state
- * Output:
- *      None.
- * Return:
- *      RT_ERR_OK              - OK
- *      RT_ERR_FAILED          - Failed
- *      RT_ERR_SMI             - SMI access error
- *      RT_ERR_INPUT           - Error parameter
- * Note:
- *      This API set LED I/O state.
- */
-rtk_api_ret_t rtk_led_OutputEnable_set(rtk_enable_t state)
-{
-    rtk_api_ret_t retVal;
-
-    /* Check initialization state */
-    RTK_CHK_INIT_STATE();
-
-    if (state >= RTK_ENABLE_END)
-        return RT_ERR_INPUT;
-
-    if ((retVal = rtl8367c_setAsicLedOutputEnable(state))!=RT_ERR_OK)
-        return retVal;
-
-    return RT_ERR_OK;
-}
-
-/* Function Name:
- *      rtk_led_OutputEnable_get
- * Description:
- *      This API get LED I/O state.
- * Input:
- *      None.
- * Output:
- *      pEnabled        - LED I/O state
- * Return:
- *      RT_ERR_OK              - OK
- *      RT_ERR_FAILED          - Failed
- *      RT_ERR_SMI             - SMI access error
- *      RT_ERR_INPUT           - Error parameter
- * Note:
- *      This API set current LED I/O  state.
- */
-rtk_api_ret_t rtk_led_OutputEnable_get(rtk_enable_t *pState)
-{
-    rtk_api_ret_t retVal;
-
-    /* Check initialization state */
-    RTK_CHK_INIT_STATE();
-
-    if(pState == NULL)
-        return RT_ERR_NULL_POINTER;
-
-    if ((retVal = rtl8367c_getAsicLedOutputEnable(pState))!=RT_ERR_OK)
-        return retVal;
-
-    return RT_ERR_OK;
-
-}
-
-/* Function Name:
- *      rtk_led_serialModePortmask_set
- * Description:
- *      This API configure Serial LED output Group and portmask
- * Input:
- *      output          - output group
- *      pPortmask       - output portmask
- * Output:
- *      None.
- * Return:
- *      RT_ERR_OK              - OK
- *      RT_ERR_FAILED          - Failed
- *      RT_ERR_SMI             - SMI access error
- *      RT_ERR_INPUT           - Error parameter
- * Note:
- *      None.
- */
-rtk_api_ret_t rtk_led_serialModePortmask_set(rtk_led_serialOutput_t output, rtk_portmask_t *pPortmask)
-{
-    rtk_api_ret_t retVal;
-    rtk_uint32 pmask;
-
-    /* Check initialization state */
-    RTK_CHK_INIT_STATE();
-
-    if(output >= SERIAL_LED_END)
-        return RT_ERR_INPUT;
-
-    if(pPortmask == NULL)
-        return RT_ERR_NULL_POINTER;
-
-    if ((retVal = rtk_switch_portmask_L2P_get(pPortmask, &pmask)) != RT_ERR_OK)
-        return retVal;
-
-    if ((retVal = rtl8367c_setAsicLedSerialOutput((rtk_uint32)output, pmask))!=RT_ERR_OK)
-        return retVal;
-
-    return RT_ERR_OK;
-}
-
-/* Function Name:
- *      rtk_led_serialModePortmask_get
- * Description:
- *      This API get Serial LED output Group and portmask
- * Input:
- *      None.
- * Output:
- *      pOutput         - output group
- *      pPortmask       - output portmask
- * Return:
- *      RT_ERR_OK              - OK
- *      RT_ERR_FAILED          - Failed
- *      RT_ERR_SMI             - SMI access error
- *      RT_ERR_INPUT           - Error parameter
- * Note:
- *      None.
- */
-rtk_api_ret_t rtk_led_serialModePortmask_get(rtk_led_serialOutput_t *pOutput, rtk_portmask_t *pPortmask)
-{
-    rtk_api_ret_t retVal;
-    rtk_uint32 pmask;
-
-    /* Check initialization state */
-    RTK_CHK_INIT_STATE();
-
-    if(pOutput == NULL)
-        return RT_ERR_NULL_POINTER;
-
-    if(pPortmask == NULL)
-        return RT_ERR_NULL_POINTER;
-
-    if ((retVal = rtl8367c_getAsicLedSerialOutput((rtk_uint32 *)pOutput, &pmask))!=RT_ERR_OK)
-        return retVal;
-
-    if((retVal = rtk_switch_portmask_P2L_get(pmask, pPortmask)) != RT_ERR_OK)
-        return retVal;
-
-    return RT_ERR_OK;
-}
-